Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High-pressure studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Preparation and Photocatalytic Hydrogen Production of TiO 2 /(AlMnCoNiZn) 3 O 4 Nanocomposites

Photocatalytic water splitting is a promising strategy for addressing the global energy crisis and environmental pollution. In this study, spinel-type high-entropy oxide (HEO) nanoparticles, (AlMnCoNiZn) 3 O 4 , were successfully synthesized via a solution combustion method. TiO 2 /(AlMnCoNiZn) 3 O 4 nanocomposites with varying molar ratios were subsequently fabricated through solid-state sintering, and their photocatalytic water-splitting performance was systematically investigated. The hydrogen production rate initially increased and then decreased with increasing TiO 2 content. The optimal nanocomposite achieved a hydrogen evolution rate of 1450 μmol·h −1 ·g −1 under simulated sunlight irradiation, which is 2.2 times higher than that of pure TiO 2 nanoparticles. In addition, the TiO 2 /(AlMnCoNiZn) 3 O 4 nanocomposites exhibited significantly improved photocorrosion resistance compared with TiO 2 nanoparticles. After 12 h irradiation under a 500-W high-pressure mercury lamp, the hydrogen production rates of the nanocomposites and pure TiO 2 retained 79.3% and 5.47% of their initial values, respectively. These results demonstrate the important role of (AlMnCoNiZn) 3 O 4 and other HEOs in enhancing the photocatalytic performance of nanoheterojunction catalysts. Lastly, this work broadens the potential applications of (AlMnCoNiZn) 3 O 4 and related HEO materials in the field of photocatalysis.

Heterojunction↗
DOE OSTI2026

In-Process Melt Separation of Depolymerized PET in PET/PE Blends for Upcycling via Twin-Screw Extrusion

Our previous work focused on depolymerizing polyethylene terephthalate (PET) in twin-screw extrusion, as part of a broader project to continuously separate PET from polyolefins in the melt. This study focused on linear low-density polyethylene (LLDPE) and PET films and the use of ethylene glycol (EG), diethylene glycol (DEG), triethylene glycol (TEG), and bis(2-hydroxyethyl) terephthalate (BHET) to depolymerize the PET in the extruder to levels above 90% Mw. In this work, the focus will shift to achieving separation of the two polymers in the twin-screw extruder, which is made possible due to a 90% reduction in the Mw of the PET, which caused a decrease of its viscosity by several orders of magnitude. Owing to the viscosity difference and pressure buildup in the die, the low-viscosity PET preferentially exited a degassing vent instead of going through the die. This is because the flow of the PET would travel through a non-pressure vent rather than through a high-pressure die. However, owing to the higher viscosity of the LLDPE, the pressure was too high to pass through such a small diameter vent hole. Supercritical CO 2 (SCCO 2 ) was used to assist in this extraction, but SCCO 2 negatively impacted the overall degree of separation. Through analysis of the separated materials, it was concluded that a high separation of the two materials was achieved. TGA and FTIR confirmed that the material separated from the vent was 100% PET. The material removed from the die was composed of 95% LLDPE and 5% PET.

36 MATERIALS SCIENCE↗
DOE OSTI2026

In‐Process Melt Separation of PE/PET Blends for Upcycling via Twin‐Screw Extrusion. Impact of Catalyst Reagents on PET Depolymerization

Part 1 of this work focused on depolymerizing polyethylene terephthalate (PET) in twin-screw extrusion, as part of a broader project to continuously separate PET from polyolefins in the melt. This study focused on linear low-density polyethylene (LLDPE) and PET films and the use of ethylene glycol (EG), diethylene glycol (DEG), triethylene glycol (TEG), and bis(2-hydroxyethyl) terephthalate (BHET) to depolymerize the PET in the extruder to levels above 90% Mw. In part 2, the focus will shift to achieving separation of the two polymers in the twin-screw extruder, which is made possible due to a 90% reduction in the Mw of the PET, which caused a decrease of its viscosity by several orders of magnitude. Owing to the viscosity difference and pressure buildup in the die, the low-viscosity PET preferentially exited a degassing vent instead of going through the die. This is because the flow of the PET would travel through a non-pressure vent rather than through a high-pressure die. However, owing to the higher viscosity of the LLDPE, the pressure was too high to pass through such a small diameter vent hole. Supercritical CO₂ (SCCO₂) was used to assist in this extraction, but SCCO₂ negatively impacted the overall degree of separation. Through analysis of the separated materials, it was concluded that a very high separation of the two materials was achieved. TGA and FTIR confirmed that the material separated from the vent was 100% PET. The material removed from the die was composed of 90% LLDPE and 10% PET.

36 MATERIALS SCIENCE↗
DOE OSTI2026

From atomistic models to machine learning: Predictive design of nanocarbons under extreme conditions

The formation of technologically valuable nanocarbon structures under extreme conditions, such as those produced during high-explosive detonations, remains poorly understood but holds significant potential for the development of controlled synthesis pathways. While detonation shockwaves provide the high-pressure, high-temperature environment required for nanodiamond formation, subsequent cooling and decompression dictate whether the diamond phase is preserved or transformed into other nanocarbon structures. Here, in this study, we employ GPU-accelerated reactive molecular dynamics (ReaxFF) simulations to investigate the graphitization and structural remodeling of detonation nanodiamond under nonlinear quench and pressure-release trajectories. We further investigate how the initial nanodiamond morphology; cuboctahedral, octahedral, or hexagonal prism influences the resulting transformation products. Evolution of nanostructure, allotrope (via simulated x-ray diffraction), carbon hybridization, and ring statistics are tracked during a two-stage quench from 5000 K to 60 GPa. Rapid cooling combined with slow decompression optimizes cubic diamond retention, whereas slow cooling with rapid pressure release promotes surface-to-core graphitization, producing concentric sp 2 -hybridized layers and hollowed inner shells. Octahedral nanodiamonds evolve into carbon nano-onions, initially forming bucky diamonds that progressively transform into fully sp 2 -hybridized structures, while hexagonal prisms preferentially form parallel-stacked graphite layers resembling carbon dots. Transient hexagonal diamond (lonsdaleite) emerges as an interfacial phase, suggesting potential reversibility in the shock-induced graphite-to-diamond transformation pathway transformation route. To extend predictive capabilities, we trained machine learning (ML) regressors on over 10 5 node-hours of molecular dynamics (MD) trajectories. A multilayer perceptron (MLP) model reliably predicts the number of graphitized layers from temperature–pressure trajectories with a coefficient of determination (R 2 ) exceeding 0.90. This high predictive fidelity enables efficient, high-throughput mapping of the synthesis parameter space for optimized graphitization outcomes. Collectively, morphological control combined with optimized quench–decompression conditions promote the selective synthesis of nanocarbon allotropes. This work establishes a data-driven framework for the rational, a priori design of carbon nanomaterials for applications in energy storage, sensing, and biomedicine.

Detonation nanodiamond remodeling↗
DOE OSTI2025

Advanced defrosting techniques in air source heat pumps: A review of vapor injection, thermal energy storage, and experimental frost accumulation data

Electrification is a critical step for reducing greenhouse gas emissions from heating. Air source heat pumps (ASHPs) are a promising alternative to fossil fuel-based systems due to their high coefficients of performance (COP), dual heating and cooling capability, and lower carbon footprint. However, for ASHPs to achieve widespread adoption, they must operate reliably across all climates, including cold regions. Additionally, defrosting techniques should be energy efficient and minimally disruptive to indoor comfort. Vapor injection (VI) technology can address the high-pressure and high-temperature lift challenges encountered in low ambient conditions. More recently, in addition to enhancing heating performance, VI has also been shown to improve the speed and efficiency of reverse cycle defrosting. Likewise, thermal energy storage (TES) has steadily gained attention for its ability to serve as an auxiliary heat source during both normal operation and defrosting. This review analyzes the benefits and limitations of VI- and TES-assisted defrosting approaches. While both technologies show strong potential individually, no studies to date have explored their combined use in ASHP systems. Additionally, to support continued development of defrosting strategies, both in modeling and experimental work, it is critical to establish frost accumulation data under a range of operating conditions. By compiling the available data from the literature, this paper also highlights the limited availability of such experimental data and the wide variation in frosting and defrosting durations and termination criteria, which are often influenced by system design and test setups.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Extraction of high-purity medium-chain-length polyhydroxyalkanoates via combined mechanical treatment and mild oxidation

Polyhydroxyalkanoates (PHAs) are a class of polyester polymers of microbial origin and considered biodegradable alternatives to conventional plastics. To make PHAs cost-competitive with synthetic plastics, their production cost, including extraction cost, should be significantly reduced. Herein, this study aimed to develop an effective extraction method based on combined mechanical disruption and chemical treatment for the recovery of high-purity medium-chain-length PHAs (mcl-PHAs) at a lower cost. mcl-PHAs-accumulating Pseudomonas strains were used for PHA extraction via high-pressure homogenization (HPH) coupled with surfactant treatment and mild alkaline hydrogen peroxide oxidation. The mechanical-chemical method was found to have strong synergy for PHA extraction while minimizing PHA depolymerization. The optimized condition resulted in nearly 90 % mcl-PHA recovery with high purity (>91 %). The extracted high-purity PHAs exhibited thermal and mechanical properties suitable for downstream applications entailing flexible and elastomeric materials.

42 ENGINEERING↗
DOE OSTI2025

Polymorphism and Negative Linear Compressibility in Pyrazine-d4

Pyrazine (1,4-diazine) is a widely used linker in coordination polymers, molecular magnets, and metal–organic frameworks, yet its solid-state polymorphism is controlled by weak C–H···N interactions. Using variable-temperature and high-pressure neutron diffraction, a previously unrecognized low-temperature transition to phase IV is identified, showing that the form stabilized under pressure can also be accessed below ∼90 K at ambient pressure in the perdeuterated compound. The transition from phase III → IV involves a symmetry-breaking lattice distortion driven by the reorganization of C–H···N hydrogen bonds, accompanied by negative linear compressibility, which is primarily accommodated through the reduction in void-space within the structure. Structural analysis reveals that while the overall monoclinic framework of phase IV is preserved under both temperature and pressure routes, the evolution of hydrogen-bonded network is distinct depending on the pathway taken. These results establish pyrazine as a model molecular solid for studying pressure–temperature polymorphism and demonstrate how weak directional interactions can produce anomalous mechanical responses in organic crystals.

Ridley, Christopher J. [Oak Ridge National Laborat↗
DOE OSTI2025

Direct Air Capture Using Aqueous Amino Acid Solvents in a Crossflow Absorber

Carbon dioxide (CO 2 ) is the most abundant of all greenhouse gases (GHGs). CO 2 levels in the atmosphere are 50% higher than in the preindustrial era, trapping heat. CO 2 removal from the atmosphere by direct air capture (DAC) is needed to achieve the internationally agreed global temperature goals. The most common CO 2 capture technology is absorption by aminebased solvents in packed columns. Amino acid solutions have recently gained attention due to their advantages over traditional amine solvents. To be implemented effectively, DAC industrial processes need to handle large airflow rates in separation absorbers. The large air and solvent flow rates preclude the use of countercurrent columns due to high-pressure drops and the occurrence of flooding. Crossflow air−liquid absorbers are used to handle large air and liquid volumes due to their lower-pressure drop. The objective of this work is to study the influence of crossflow absorber geometric parameters and operating conditions on product formation and process efficiency. An already derived theoretical model for countercurrent absorbers has been modified to simulate the operation of a crossflow DAC absorber. The predictive model was implemented into a computer code that was used to study the efficiency of the processes as geometric equipment dimensions and operating parameters vary. Practical suggestions are made to design more efficient DAC processes.

Absorption↗
DOE OSTI2025

Dynamic Features of Cu-Ceria Interface under CO 2 Hydrogenation to Methanol

It is generally accepted that metal–support interaction is very important for the hydrogenation of CO 2 to methanol, but little has been revealed about the feature of interfacial active sites under real reaction conditions since there are only limited techniques that can be applied under high-pressure conditions. Here, in this work, by combining multiple in situ and operando techniques on a model Cu/ceria catalyst, we have tracked Cu and ceria sites for methanol formation. Under the reaction condition, it is found that upon reaching the reaction temperature, oxidized Cu species in the as-synthesized catalyst immediately change into metallic Cu species. Following this, it is the gradual formation of methanol, the changing rate of which coincides with the formation of a unique Ce 3+ species. The combined experimental results and density functional theory (DFT) calculations have determined that the formed Ce 3+ sites driven by the reaction conditions are bound to hydrides, adsorbed carbonate species, and interfacial active Cu sites. The Cu-ceria interaction in this complex moiety is weak and can be easily disturbed with reaction environment variations, leading to dynamic changes at the interface upon the hydrogenation of active carbonate intermediates, which are precursors for the formation of methanol. The formation of this unique Cu–Ce 3+ interface and its dynamicity lead to an increase of methanol selectivity from less than 20% to 60%. These results suggest that reactant-derived species (H – and carbonate in this work) can be essential components of the active center with the functions of manipulating the metal−oxide interaction and directing reaction pathways.

CO2 hydrogenation to methanol↗
DOE OSTI2026

Pressure Heterogeneity and Material Utilization in Thin-Film Solid-State Cathodes

Intimate interfacial contact between the solid electrolyte and the cathode active material is critical for maximizing cathode utilization in solid-state batteries. However, volume changes during electrochemical cycling induce internal stresses that drive interfacial degradation, particularly under nonuniform stack pressure. In this study, we employ in situ energy-dispersive X-ray diffraction tomography to visualize and quantify reaction heterogeneities across a 3 mm-diameter solid-state cathode with a well-defined interface. Our results reveal that regions under a lower stack pressure exhibit reduced material utilization and reversibility, which negatively affect the high-pressure regions. Interfacial degradation further impedes lithium-ion transport and amplifies microscale reaction heterogeneity. These findings highlight the critical role of stack pressure distribution in governing interfacial stability and electrochemical performance, offering important design insights into practical solid-state battery systems.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Hydrophobic Metal–Organic Frameworks Enable Superior High-Pressure Ammonia Storage through Geometric Design

Hydrophobic metal–organic frameworks (MOFs) are typically overlooked for ammonia storage due to weak host–guest interactions. Here, we demonstrate that four structurally analogous aluminum-based MOFs exhibit a counterintuitive behavior whereby framework geometry, rather than ligand hydrophilicity, determines high-pressure NH 3 adsorption performance. The hydrophobic CAU-23 achieved an exceptional capacity matching hydrophilic analogs despite its poor low-pressure uptake. This pressure-dependent enhancement stems from the unique 4-cis-4-trans geometry of CAU-23 compared to the purely cis arrangement of MIL-160 and KMF-1 and the alternating cis-trans configuration of MOF-303. Critically, CAU-23 retained 95% capacity over three high-pressure cycles, whereas hydrophilic MOFs suffered 39–46% irreversible losses due to strong NH 3 -framework interactions that compromise structural integrity. Grand canonical Monte Carlo simulations reveal that high pressure enables NH 3 clustering through intermolecular hydrogen bonding, bypassing the need for strong host–guest interactions. High-pressure powder X-ray diffraction measurements confirm the exceptional mechanical resilience of CAU-23, showing complete structural recovery upon decompression despite exhibiting the highest pressure sensitivity among the studied MOFs. An extended analog, HE-CAU-23, validates this design principle with further enhanced capacity. Furthermore, these findings reveal a paradigm shift toward hydrophobic MOFs with optimized geometry for high-performance and regenerable gas storage applications.

MOFs↗
DOE OSTI2026

Geophysical Impacts and Spectroscopic Identification of a Hydrous Iron Sulfate on Icy Worlds

Over geologic time-scales, large volumes of exogenic sulfur ions from Io's plasma torus have been supplied to the surface of Europa and Ganymede, which, combined with recent interpretations of orbiter images, dynamical modeling, and surface-subsurface exchange, suggests further sulfur transport into the interior of the icy worlds. These observations motivate mixed-phase spectral modeling for interpreting orbiter spectroscopy data and determination of hydration states of candidate surface materials including hydrous sulfates. In this work, we present a combined experimental and theoretical study of the low temperature and high pressure vibrational spectral signature of the iron-sulfate monohydrate endmember, szomolnokite (FeSO 4 ·H 2 O). By employing synchrotron Fourier-transform infrared spectroscopy (FTIR) in the diamond anvil cell up to 23 GPa and down to 20 K, we explore the extreme range of pressure-temperature domains relevant to icy environments throughout our solar system and beyond. Combined with our density-functional theory quantum-mechanics molecular dynamics results, we demonstrate that experimentally observed infrared features in the O-H stretching region commonly associated with nH 2 O (n > 1) hydration states can be attributed to a pure monohydrate without the need for pressure-induced exsolved ice, other coexisting hydrous iron sulfates, or strong overtone and combination modes. We further discuss the possibility of lateral variations in density and shear properties on icy worlds associated with temperature variations and the high-pressure phases of kieserite group monohydrated sulfates.

Geosciences↗
DOE OSTI2025

Observation of a mixed close-packed structure in superionic water

The study of superionic (SI) water has been a highly active research area since its theoretical prediction. Despite significant experimental and computational efforts, its melting curve and the stability of different oxygen lattices remain debated, impacting our understanding of SI ice’s peculiar transport properties. Experimental results at lower pressures show disagreement, whereas data at higher pressures are scarce due to the extreme challenges of such experiments. In this work, we present ultrafast X-ray diffraction results of water compressed by multiple shocks to pressures up to ~ 180 GPa. At pressures exceeding 150 GPa and temperatures around 2500 K, our diffraction patterns challenge the pure FCC-SI phase model, providing experimental evidence of the mixed close-packed superionic phase predicted by advanced ab initio calculations. At lower pressures, we observe simultaneous signatures of BCC and FCC structures within a pressure-temperature range consistent with some static-compression experiments, helping to resolve contradictory results in literature. These insights offer new constraints on the stability domains of SI phases and reveal detailed structural features, such as stacking faults. Our results advance the structural understanding of high-pressure SI ice to a level approaching that of ice I polymorphs, with potential implications for water-rich interiors of giant planets.

Andriambariarijaona, Leon [Centre National de la R↗
DOE OSTI2026

Platform for 100 s Mbar equation of state measurements on the National Ignition Facility

Equation of state (EOS) measurements in the 100 s Mbar range are needed to underwrite models employed in the simulation of high energy density plasmas. To this end, a platform has been developed for fielding on the National Ignition Facility, capable of producing high-quality impedance match EOS data, wherein a planar, high-pressure, steady shock is driven into a sample package, and sample and reference standard shock velocities are measured. This platform, dubbed planar high pressure, or PHP, was fielded with an initial proof-of-concept shot in January 2023. The first PHP shot, aiming to study gold, demonstrated a pressure close to 400 Mbar, two orders of magnitude higher than previously reported gold EOS data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Laser-heated diamond anvil cell synthesis and recovery of metastable MnSb 2 and YbZn 2 for post-synthesis transport studies

The creation and exploration of new materials under extreme pressure–temperature conditions has become increasingly reliant on laser-heated diamond anvil cell (LHDAC) techniques, which provide direct access to previously unexplored regions of multinary phase diagrams. Whereas numerous high-pressure phases have been identified in situ, systematic recovery and post-synthesis physical property characterization of these materials remain significant challenges. In this work, we describe the setup and implementation of an LHDAC-based synthesis and recovery workflow and demonstrate its application to metastable MnSb 2 and YbZn 2 phases. Synchrotron x-ray diffraction and spatial mapping confirm dominant formation of the targeted phases, whereas laboratory-based refinement quantifies phase fractions despite intrinsic microstrain and minor secondary phases. High-pressure transport measurements on recovered samples reveal pressure-tunable electronic instabilities in both systems. In MnSb 2 , pressure suppresses two high-temperature magnetic ordering anomalies, observed in transport, by ∼5 GPa and, for higher pressures, induces a new low-temperature feature that increases with further pressure increase. In hexagonal high-pressure YbZn 2 , an electronic reconstruction emerges at ∼11 GPa, characterized by semiconducting-like behavior from ∼30 to 300 K and a broad low-temperature coherence crossover near 30 K. Our results establish LHDAC synthesis not only as a structural discovery tool but also as an experimental platform for investigating correlated quantum states stabilized far from equilibrium thermodynamic conditions.

Huyan, S. [Iowa State University, Ames, IA (United↗
DOE OSTI2025

Structural transition and possible pressure-induced superconductivity in a suboxide La 5 Pb 3 O

Here, in this study, we report a structural phase transition and its interplay with superconductivity in the suboxide La 5⁢ Pb 3 ⁢O. Upon cooling through 𝑇 𝑡 = 225K, La 5⁢ Pb 3⁢ O transforms from a high-temperature 𝐼⁢4/mcm to a low-temperature 𝑃⁢4/ncc structure in which La-Pb dimerization along the 𝑐 axis occurs. This transition is accompanied by anomalies in the temperature dependence of electrical resistivity and specific heat. High-pressure electrical transport measurements reveal that hydrostatic pressure suppresses the structural transition and possibly induces superconductivity with a maximum superconducting temperature of 10 K. Density functional theory calculations show minimal changes in the electronic density of states and no gap opening at 𝐸 𝐹 across 𝑇 𝑡 , suggesting that the transition is driven by bonding effects rather than Fermi surface instability. These findings establish La 5⁢ Pb 3 ⁢O as a promising platform for exploring the interplay between weak structural transitions and superconductivity.

Yan, Jiaqiang [Oak Ridge National Laboratory (ORNL↗
DOE OSTI2025

Development of Hydrogen Burner for FT4000® Aeroderivative Engine - Final Report

This report details an effort to develop a retrofittable fuel/air injector for the FT4000® aeroderivative gas turbine that enables use of hydrogen as a carbon-free fuel for efficient power generation. The FT4000 engine’s low-NOx combustor was developed by Pratt & Whitney and RTX Technology Research Center with core technology from the Pratt & Whitney PW4000 turbofan aircraft engine. The current FT4000 production engine operates on either natural gas or No. 2 fuel oil with water injection to achieve high thermal efficiency and low emissions. This engine is fielded by Mitsubishi Power Aero and delivers 70 MW of power with a simple-cycle efficiency of over 41% when operating with wet compression. The work reported here advances the technology readiness level of the FT4000 combustor for operation with hydrogen, starting with an experimental assessment of the current production hardware with increasing hydrogen content mixed with natural gas and ending with improved nozzle concepts for fully robust operation with 100% hydrogen. High-pressure single-sector combustor rig tests have been completed, demonstrating the ability for the dual fuel nozzle to operate an FT4000 combustor on 100% hydrogen with low nitrogen oxide (NOx) emissions. Metal temperature measurements and video images of the flame structure from zero to 100% hydrogen highlight opportunities to improve the fuel nozzle robustness for high hydrogen conditions. The design of new fuel/air mixer concepts to improve durability and operability with high hydrogen levels was also completed. A total of eleven new concepts were developed and analyzed, ranging from modifications to the bill-of-materials nozzle to fully clean sheet designs. The concepts were evaluated with non-reacting and reacting flow evaluations to assess the performance of the new hardware designs. Non-reacting tests included Phase Doppler Particle Analysis (PDPA) for droplet size and velocity, mechanical patternation for liquid water flux, and planar laser induced fluorescence (PLIF) with acetone-seeding for gaseous fuel/air mixing characterization. Five scaled candidate fuel nozzle designs, in addition to a scaled bill-of-materials nozzle, were then successfully evaluated in an atmospheric pressure burner rig. The nozzles were evaluated for performance with natural gas, hydrogen/natural gas blends, and pure hydrogen. For 100% hydrogen, the nozzles were evaluated with and without water injection. Optical and infrared imaging of the flame and fuel nozzle was captured. NOx emissions were sampled from fixed emissions probes. The results show measurable differences between the various designs, and the data was used to down-select the two most promising designs to advance to future full pressure rig testing. Results from this study have cleared the current production FT4000 engines with dual fuel nozzles to operate at baseload power on blends of hydrogen mixed with natural gas and water. Two promising nozzle designs have been developed to enable fully robust operation with up to 100% hydrogen. These nozzles require validation at full baseload operating conditions before they can be introduced to the field.

03 NATURAL GAS↗
DOE OSTI2025

Modeling and Simulation of Fuel Dispersal During the Loss-of-Coolant Accident

This document is the compilation of the milestone portion to a larger end of project NEUP report. The executive summary of the modeling portion is provided below: In the event of cladding rupture during a postulated LOCA in a pressurized water reactor, fuel particles, along with fission gases, can be expelled into the reactor core from the fractured fuel rod, a phenomenon referred to as fuel dispersal. The initial stage of fuel dispersal is strongly influenced by the high-pressure ejection of fuel fragments, the size and geometry of the ruptured cladding, and the depressurization history of the fuel rod during the postulated LOCA transient. Depending on the location of the burst orifice relative to the quench front, the dispersal event represents an intricate three-phase flow and heat transfer phenomenon, where high-temperature fuel particles carried by the fission gases interact with the coolant within the narrow subchannels of the fuel assemblies, inducing localized phase change. Given the unique multiphysics nature of this phenomena, the current study develops a dedicated computational framework to predict the mass distribution and cooling of dispersing fuel particles, facilitating post-accident assessment and management of the fuel assemblies. Considering the scale of nuclear reactor applications, a continuum three-fluid model is proposed for simulating the transport of solids within the reactor core. With high-temperature fuel fragments within the liquid media, nucleation sites inducing phase changes are dispersed within the flow domain. Coupled with the fact that the transient dispersal event occurs on different time scales than other three-phase flow applications, this study derives a time-averaged three-fluid flow model without losing generality. The assumptions regarding the continuum treatment of the solid phase and the modeling of fuel dispersal behavior are incorporated to simplify the governing equations and derive applicable closure relations. The computational validation of the model was conducted using adiabatic experimental results obtained from ongoing research at Oregon State University, focusing on characterizing fuel dispersal behavior during simulated LOCA conditions. Settlement characteristics of the solids, quantified by the probability distribution of equivalent particles, closely matched the probability density functions reported in experimental studies. The transport of fuel particles within a scaled 5 × 5 lattice of a pressurized-water reactor rod bundle geometry was modeled through a two-fluid Eulerian framework. The required boundary conditions were evaluated from the fuel performance code BISON in a postulated large-break LOCA scenario. The modeling framework considered solid fuel particles as granular matter, interacting with the gaseous dry steam phase and fission gases through the governing interfacial momentum exchange between the participating fluids. The simulation results provided the volume fraction of the solids obtained at the bottom surface of the enclosing tank geometry. Postulated LOCA leading to fuel dispersal phenomena involves the strong coupling between fuel thermomechanics, cladding deformation, thermal-hydraulics, and fuel particle transport. Incorporation of such a strong coupling in numerical simulation is performed by coupling the multiphysics solvers. In the case of fuel dispersal, a strong coupled simulation can be performed by coupling the BISON code for fuel performance, the TRACE code for system-level thermal hydraulics, and fuel particle transport in Multiphysics Object-Oriented Simulation Environment (MOOSE). For such intricate infrastructure, the MOOSE Framework eases the data transfer between codes. The recent version of MOOSE has incorporated the Navier-Stokes module for the fluid flow. An exploratory exercise was done to gain familiarity with finite volume capabilities in the MOOSE framework to incorporate the Spalart-Allmaras (SA) turbulence model. New finite-volume and auxiliary kernels were introduced to assemble the SA transport equation, compute turbulent viscosity, and evaluate wall distance and diagnostic turbulence terms, fully integrated with existing Navier-Stokes modules. A turbulent lid-driven cavity at a Reynolds number of approximately 10,000 is used for verification. MOOSE shows the robust solver convergence and produces the turbulent features. But it underpredicts the velocity profile and turbulent quantities, emphasizing the need to develop improved SA near-wall treatments (e.g., low-Re corrections or wall functions) as a key direction for future work.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗