Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “6.1”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Observation of W + W – γ production in pp collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector and constraints on anomalous quartic gauge-boson couplings

This Letter reports the observation of W + W – γ triboson production in 140 fb –1 of data collected by the ATLAS detector from proton–proton collisions at a centre-of-mass energy of $\sqrt{s}$ = 13 TeV at the LHC. Events with an opposite-charge eμ pair, a high transverse-momentum photon, and significant missing transverse momentum are considered. The observed (expected) significance of the signal is 5.9 (6.0) standard deviations. The measured fiducial cross-section, defined for the W + W – γ → e ± μ ∓ $ν\bar{ν}$γ final state is 6.2 ± 0.8 (stat.) ± 0.6 (sys.) fb, in good agreement with the Standard Model prediction of 6.1$^{+1.0}_{–0.7}$ fb. Constraints on the Wilson coefficients of 13 dimension-8 operators describing physics beyond the Standard Model through anomalous quartic gauge-boson couplings are derived using the effective field theory framework.

Anomalous quartic gauge couplings↗
DOE OSTI2026

Experimental and data-driven characterization of window-induced air leakage in residential buildings

Windows contributes up to 40% of envelope heat losses and around 9% of total building energy consumption due to air leakage. In the U.S., 48 million homes still use single-pane windows. Although the U.S. has an estimated 1.4 billion windows in its building stock and about 24 million windows are installed annually, only around 29 million individual window replacements (∼2%) occur each year. To address this gap, this study generates empirical evidence by (1) evaluating the contribution of windows to whole-building air leakage in 20 residential buildings using blower door tests before and after window replacement and (2) assessing whether building and window characteristics influence the measured change. Most simulation studies assume that replacing windows not only lowers the U-factor but also reduces air leakage by 10–20%. However, this assumption lacks empirical validation, highlighting the need for experimental analysis of air leakage specifically associated with windows. Using blower door tests in accordance with ASTM E779–19, the results indicated an average reduction in air infiltration of 6.1% within the range of 0.5–19.30% across all buildings and no significant correlations were found between air leakage improvements and any building/window characteristics. This research aims to help homeowners, and energy modelers to provide empirical data on importance of upgrading to more energy-efficient windows, supporting energy-efficient building standards.

Air leakage↗
DOE OSTI2025

Accurate determination of uranium isotope abundances by wavelength modulation spectroscopy in atomic beams

The design and demonstration of an optical analysis system based on wavelength modulation spectroscopy in an atomic beam for uranium isotope abundance determinations is presented. This system probes the uranium 5f 3 6d7s 2 ( 5 L 6 ) → 5f 2 6d 2 7s 2 ( 5 K 5 ) transition at 861.031 nm, which is considered to be the most suitable transition for uranium isotopic analysis. A new laser characterization strategy was developed for the conditions where optimum laser wavelength modulation depth was small compared to the free spectral range (FSR) of etalons. Two capabilities enabled the higher-precision determination of isotope abundances of atomic beams: (1) reduction of low-frequency additive noise, especially the noise caused by black-body radiation and (2) suppression of non-absorption transmission losses. The performance of this system was validated with uranium samples of various isotopic compositions. Further, by comparing the measurements using natural uranium samples between the direct absorption and the wavelength modulation approaches, a 21-fold decrease in uncertainty of the integrated absorbance and a 6.8-fold improvement in the 1-σ precision of the number density were achieved. In addition, by comparing the results using uranium oxide samples, a 6.1-fold decrease in the uncertainty of inferred isotope abundance was obtained. These results demonstrate that the 1f-normalized 2f wavelength modulation spectroscopy (WMS-2f/1f) technique enables higher-precision analysis of atomic beams.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Satellite-based aerosol optical depth estimates over the continental U.S. during the 2020 wildfire season: Roles of smoke and land cover

Wildfires produce smoke that can affect an area >1000 times the burn extent, with far-reaching human health, ecologic, and economic impacts. Accurately estimating aerosol load within smoke plumes is therefore crucial for understanding and mitigating these impacts. We evaluated the effectiveness of the latest Collection 6.1 MODIS Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm in estimating aerosol optical depth (AOD) across the U.S. during the historic 2020 wildfire season. We compared satellite-based MAIAC AOD to ground-based AERONET AOD measurements during no-, light-, medium-, and heavy-smoke conditions identified using the Hazard Mapping System Fire and Smoke Product. This smoke product consists of maximum extent smoke polygons digitized by analysts using visible band imagery and classified according to smoke density. We also examined the strength of the correlations between satellite- and ground-based AOD for major land cover types under various smoke density levels. MAIAC performed well in estimating AOD during smoke-affected conditions. Correlations between MAIAC and AERONET AOD were strong for medium- (r = 0.91) and heavy-smoke (r = 0.90) density, and MAIAC estimates of AOD showed little bias relative to ground-based AERONET measurements (normalized mean bias = 3 % for medium, 5 % for heavy smoke). During two high AOD, heavy smoke episodes, MAIAC underestimated ground-based AERONET AOD under mixed aerosol (i.e., smoke and dust; median bias = −0.08) and overestimated AOD under smoke-dominated (median bias = 0.02) aerosol. MAIAC most overestimated ground-based AERONET AOD over barren land (mean NMB = 48 %). Our findings indicate that MODIS MAIAC can provide robust estimates of AOD as smoke density increases in coming years. Increased frequency of mixed aerosol and expansion of developed land could affect the performance of the MAIAC algorithm in the future, however, with implications for evaluating wildfire-associated health and welfare effects and air quality standards.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Global biogeography of fungal and bacterial biomass carbon in topsoil

Bacteria and fungi, representing two major soil microorganism groups, play an important role in global nutrient biogeochemistry. Biogeographic patterns of bacterial and fungal biomass are of fundamental importance for mechanistically understanding nutrient cycling. We synthesized 1323 data points of phospholipid fatty acid-derived fungal biomass C (FBC), bacterial biomass C (BBC), and fungi:bacteria (F:B) ratio in topsoil, spanning 11 major biomes. The FBC, BBC, and F:B ratio display clear biogeographic patterns along latitude and environmental gradients including mean annual temperature, mean annual precipitation, net primary productivity, root C density, soil temperature, soil moisture, and edaphic factors. At the biome level, tundra has the highest FBC and BBC densities at 3684 (95% confidence interval: 1678–8084) mg kg -1 and 428 (237–774) mg kg -1 , respectively; desert has the lowest FBC and BBC densities at 16.92 (14.4–19.89) mg kg -1 and 6.83 (6.1–7.65) mg kg -1 , respectively. The F:B ratio varies dramatically, ranging from 1.8 (1.6–2.1) in savanna to 8.6 (6.7–11.0) in tundra. An empirical model was developed for the F:B ratio and it is combined with a global dataset of soil microbial biomass C to produce global maps for FBC and BBC in 0–30 cm topsoil. Across the globe, the highest FBC is found in boreal forest and tundra while the highest BBC is in boreal forest and tropical/subtropical forest, the lowest FBC and BBC are in shrub and desert. Global stocks of living microbial biomass C were estimated to be 12.6 (6.6–16.4) Pg C for FBC and 4.3 (0.5–10.3) Pg C for BBC in topsoil. These findings advance our understanding of the global distribution of fungal and bacterial biomass, which facilitates the incorporation of fungi and bacteria into Earth system models. The global maps of bacterial and fungal biomass serve as a benchmark for validating microbial models in simulating the global C cycle under a changing climate.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Three-dimensional paganica fault morphology obtained from hypocenter clustering (L'Aquila 2009 seismic sequence, Central Italy)

In seismic modelling, fault planes are normally assumed to be flat due to the lack of data which can constrain fault morphology. However, incorporating 3D fault morphology is important for modelling several phenomena, for example calculating mainshock induced stress changes. Here we utilize a data-analytical method to unveil the 3D rupture morphology of faults using unsupervised clustering techniques applied to earthquake hypocenters in seismic sequences. We apply this method to the 2009 L'Aquila seismic sequence which involved a M W 6.1 mainshock on April 6th. We use a dataset of about 50,000 relocated events, mostly microearthquakes, reaching magnitude of completeness equal to 0.7. Clustering distinguishes the earthquakes as occurring in three main clusters along with other minor fault segments. We then represent the morphology of the main Paganica fault system (responsible for the largest mainshock) using splines. This method shows promise as a step toward robustly and quickly obtaining 3D rupture morphologies where earthquake sequences have been monitored. The 3D model is presented interactively online, and the processing is presented in an interactive Jupyter Notebook (https://bit.ly/2MnCFdj).

58 GEOSCIENCES↗
DOE OSTI2024

Component innovations for lower cost mechanical vapor compression

Despite significant capital and operating costs, mechanical vapor compression (MVC) remains the preferred technology for challenging brine concentration applications. Here, this work seeks to assess the dependence of MVC costs on feedwater salinity and desired water recovery and to quantify the value of improved component performance or reduced component costs for reducing the levelized cost of water (LCOW) of MVC. We built a cost optimization model coupling thermophysical, heat and mass transfer, and technoeconomic models to optimize and identify low cost MVC system designs as a function of feedwater salinity and water recovery. The LCOW ranges over 3.6 to 6.1 $\$$/m 3 for seawater feed salinities of 25–150 g/kg and water recoveries of 40–80 %. We then perform sensitivity analysis on parameter inputs to isolate irreducible costs and determine high value component innovation targets. The LCOW was most sensitive to evaporator material costs and performance, including the overall heat transfer coefficient in the evaporator. Process and material innovations such as polymer-composite evaporator tubes that reduce evaporator costs by 25 % without reducing heat transfer performance by more than 10 % would result in MVC cost reductions of 8 %.

42 ENGINEERING↗
DOE OSTI2023

Engineering Escherichia coli for selective 1-decanol production using the reverse β-oxidation (rBOX) pathway

1-Decanol has great value in the pharmaceutical and fragrance industries and plays an important role in the chemical industry. Here, in this study, we engineered Escherichia coli to selectively synthesize 1-decanol by using enzymes of the core reverse β-oxidation (rBOX) pathway and termination module with overlapping chain-length specificity. Through screening for acyl-CoA reductase termination enzymes and proper regulation of rBOX pathway expression, a 1-decanol titer of 1.4 g/L was achieved. Further improvements were realized by engineering pyruvate dissimilation to ensure the generation of NADH through pyruvate dehydrogenase (PDH) and reducing byproduct synthesis via a tailored YigI thioesterase knockout, increasing 1-decanol titer to 1.9 g/L. The engineered strain produced about 4.4 g/L 1-decanol with a yield of 0.21 g/g in 36 hours in a bi-phasic fermentation that used a dodecane overlay to increase 1-decanol transport and reduce its toxicity. Adjustment of pathway expression (varying inducer concentration) and cell growth (oxygen availability) enabled 1-decanol production at 6.1 g/L (0.26 g/g yield) and 10.05 g/L (0.2 g/g yield) using rich in shake flasks and bioreactor, respectively. Remarkably, the use of minimal medium resulted in 1-decanol production at 100% specificity at 2.8 g/L (0.14 g/g yield) and a per cell mass yield higher than rich medium. These 1-decanol titers, yields and purity are at least 10-fold higher than others reported to date and the engineered strain shows great potential for industrial production. Taken together, our findings suggest that using rBOX pathway and termination enzymes of proper chain-length specificity in combination with optimal chassis engineering should be an effective approach for the selective production of alcohols.

1-decanol↗
DOE OSTI2022

Rye-soybean double-crop: planting method and N fertilization effects in the North Central US

Double-cropping winter rye cover crops (CC) with soybean in the North Central US could help with the global effort to sustainably intensify agriculture. Studies addressing the management of these systems are limited. Therefore, a field study was conducted from 2017 to 2019 in Central Iowa, US to evaluate winter rye CC biomass production, aboveground N accumulation, estimated economics, estimated within-field energy balance and estimated greenhouse gas (GHG) emissions under three N application rates (0, 60, 120 kg N ha –1 ) and three planting methods (pre- and post-harvest broadcast and post-harvest drilling). Averaged over N rates, all planting methods resulted in >5.0 Mg ha –1 year –1 rye aboveground biomass dry matter. Averaged over the 2-year study and compared with unfertilized treatments, applying 60 kg N ha –1 produced 1.1 Mg ha –1 more aboveground biomass (6.1 vs 5.0 Mg ha –1 ), accumulated 30 kg ha –1 more N in aboveground biomass (88 vs 58 kg N ha –1 ), and led to 20 GJ ha –1 more net energy. Biomass production was not significantly higher with 120 kg N ha –1 compared with the 60 kg N ha –1 rate. Even when accounting for an estimated 0.75 Mg ha –1 of above ground rye biomass left in the field after harvesting, more N was removed than applied at the 60 kg N ha –1 rate. The minimum rye prices over the 2-year study needed for double-cropping winter rye CC to be profitable (breakeven prices) averaged $117 and $104 Mg –1 for the 0 and 60 kg N ha –1 rates, which factors in estimated soybean yield reductions in 2019 compared with local averages but not off-site transportation. GHG emissions were estimated to increase approximately threefold between the unfertilized and 60 kg N ha –1 rates without considering bioenergy offsets. While environmental tradeoffs need further study, results suggest harvesting fertilized rye CC biomass before planting soybean is a promising practice for the North Central US to maximize total crop and net energy production.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

A Reactor Scale-Up Methodology from Lab-Scale to Pilot-Scale Operations: Numerical Modeling of THFA Dehydration to DHP in Packed-Bed Reactors

This manuscript discusses developing a model-based scale-up methodology for a successful technology transfer of gas-phase catalytic reactors from a lab-scale to a pilot-scale operation. The manuscript demonstrates the methodology for gas-phase dehydration of tetrahydrofurfuryl alcohol (THFA) to dihydropyran (DHP) process over commercial Al 2 O 3 catalysts. A two-dimensional reactor model was developed using COMSOL Multiphysics 6.1 software. The model solves heat and mass transport equations in bed-scale and particle scales simultaneously. This powerful feature enables accurate prediction of the heat and mass transfer limitations in pilot-scale reactors, if any exists. Further, the model uses isothermal lab-scale experimental data to derive and validate the reaction chemistry, flow fields and boundary conditions. The model was then scaled-up to project conversion, selectivity, yield and formation rate of DHP in a pilot-scale reactor. The results highlight the complex nature of chemistry, heat, and mass transfer effects in lab-scale and pilot-scale reactors. The model results inform the possible operational limitations of the pilot-scale reactor and design strategies to improve process efficiency. Although the scale-up approach is explained through the THFA dehydration process, the methodology is applicable to any catalytic packed-bed reactor models for a successful process scale-up.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Overcoming the Conductance versus Crossover Trade-off in State-of-the-Art Proton Exchange Fuel-Cell Membranes by Incorporating Atomically Thin Chemical Vapor Deposition Graphene

Permeance–selectivity trade-offs are inherent to polymeric membranes. In fuel cells, thinner proton exchange membranes (PEMs) could enable higher proton conductance and increased power density with lower area-specific resistance (ASR), smaller ohmic losses, and lower ionomer cost. However, reducing thickness is accompanied by an increase in undesired species crossover harming performance and long-term efficiency. Here, we show that incorporating atomically thin monolayer graphene synthesized via scalable chemical vapor deposition (CVD) and tunable defect density into PEMs (Nafion, ~5–25 μm thick) can allow for reduced H 2 crossover (~34–78% of Nafion of a similar thickness) while maintaining adequate areal proton conductance for applications (>4 S cm –2 ). In contrast to most prior work using >50 μm symmetric Nafion sandwich structures, we elucidate the interplay of graphene defect density and Nafion proton transport resistance on the performance of Nafion|graphene composite membranes and find high-quality low-defect density CVD graphene (G) supported on Nafion 211 (~25 μm); i.e., N211|G has a high areal proton conductance (~6.1 S cm –2 ) and the lowest H 2 crossover (~0.7 mA cm –2 ). Fully functional centimeter-scale N211|G fuel-cell membranes demonstrate performance comparable to that of state-of-the-art Nafion N211 at room temperature as well as standard operating conditions (~80 °C, ~150–250 kPa-abs) with H 2 /air (power density ~0.57–0.63 W cm –2 ) and H 2 /O 2 feed (power density ~1.4–1.62 W cm –2 ) and markedly reduced H 2 crossover (~53–57%).

25 ENERGY STORAGE↗
DOE OSTI2023

Laser Scribing for Electrode Patterning of Perovskite Spectrometer-Grade CsPbBr 3 Gamma-ray Detectors

Making semiconductor radiation detectors that work at room temperature relies heavily on the deposition and pixelation of electrodes. Electrode patterning of perovskite solar cells widely implements laser scribing techniques, which is a convenient, scalable, and inexpensive technique. However, this method has not found its application in radiation detector patterning yet, and the question whether laser scribing can achieve high-quality patterns with minimum damage to a detector crystal and low interpixel cross-talk remains largely unanswered. To prove that laser scribing is a practical method for electrode patterning on perovskite CsPbBr 3 detectors, we use the material to create a variety of patterns. A very low lateral leakage current (60 nA at 10 V) and high mobility-lifetime product (9.7(3) x 10 -4 cm 2 /V) were observed between the pixel and the guard ring in tests of single-pixel devices with a separation of 200 or 100 μm between the central electrode and the guard ring. The 122 and 136 keV photopeaks in 57 Co gamma-ray spectra were very well resolved with an energy resolution of up to 6.1% at 122 keV. Finally, a further reduction in gap size to 50 mu m is conceivable, but more process optimization is needed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Isolated Metal Sites in Cu–Zn–Y/Beta for Direct and Selective Butene-Rich C 3+ Olefin Formation from Ethanol

Direct and selective production of C 3+ olefins from bioethanol remains a critical challenge and important for the production of renewable transportation fuels such as aviation biofuels. In this study, we report a Cu–Zn–Y/Beta catalyst for selective ethanol conversion to butene-rich C 3+ olefins (88% selectivity at 100% ethanol conversion, 623 K), where the Cu, Zn, and Y sites are all highly dispersed. The ethanol-to-butene reaction network includes ethanol dehydrogenation, aldol condensation to crotonaldehyde, and hydrogenation to butyraldehyde, followed by further hydrogenation and dehydration reactions to form butenes. Cu sites play a critical role in promoting hydrogenation of the crotonaldehyde C═C bond to form butyraldehyde in the presence of hydrogen, making this a distinctive pathway from crotyl alcohol-based ethanol-to-butadiene reaction. Reaction rate measurements in the presence of ethanol and acetaldehyde (543 K, 12 kPa ethanol, 1.2 kPa acetaldehyde, 101.9 kPa H 2 ) over monometallic Zn/Beta and Y/Beta catalysts indicate that Y sites have higher C–C coupling rates than over Zn sites (initial C–C coupling rate, 6.1 × 10 –3 mol mol Y –1 s –1 vs 1.2 × 10 –3 mol mol Zn –1 s –1 ). Further, Lewis-acidic Y-site densities over Cu–Zn–Y/Beta with varied Y loadings are linearly correlated with the initial C–C coupling rates, suggesting that Lewis-acidic Y sites are the predominant sites that catalyze C–C coupling in Cu–Zn–Y/Beta catalysts. Control experiments show that the dealuminated Beta support is important to form higher density of Lewis-acidic Y sites in comparison with other supports such as silica, or deboronated MWW despite similar atomic dispersion of Y sites and Y–O coordination numbers over these supports, leading to more than 9 times higher C–C coupling rate per mole Y over dealuminated Beta relative to other supports. This study highlights the significance of unique combination of metal sites in contributing to the selective valorization of ethanol to C 3+ olefins, motivating for exploring multifunctional zeolite catalysts, where the presence of multiple sites with varying reactivities and functions allows for controlling the predominant molecular fluxes toward the desired products in complex reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Statistical Multiobjective Optimization of Thiospinel CoNi 2 S 4 Nanocrystal Synthesis via Design of Experiments

Thiospinels, such as CoNi 2 S 4 , are showing promise for numerous applications, including as catalysts for the hydrogen evolution reaction, hydrodesulfurization, and oxygen evolution and reduction reactions; however, CoNi 2 S 4 has not been synthesized as small, colloidal nanocrystals with high surface-area-to-volume ratios. Traditional optimization methods to control nanocrystal attributes such as size typically rely upon one variable at a time (OVAT) methods that are not only time and labor intensive but also lack the ability to identify higher-order interactions between experimental variables that affect target outcomes. Herein, we demonstrate that a statistical design of experiments (DoE) approach can optimize the synthesis of CoNi 2 S 4 nanocrystals, allowing for control over the responses of nanocrystal size, size distribution, and isolated yield. After implementing a 2 5–2 fractional factorial design, the statistical screening of five different experimental variables identified temperature, Co:Ni precursor ratio, Co:thiol ratio, and their higher-order interactions as the most critical factors in influencing the aforementioned responses. Second-order design with a Doehlert matrix yielded polynomial functions used to predict the reaction parameters needed to individually optimize all three responses. A multiobjective optimization, allowing for the simultaneous optimization of size, size distribution, and isolated yield, predicted the synthetic conditions needed to achieve a minimum nanocrystal size of 6.1 nm, a minimum polydispersity (σ/$\bar{d}$) of 10%, and a maximum isolated yield of 99%, with a desirability of 96%. The resulting model was experimentally verified by performing reactions under the specified conditions. Furthermore, our work illustrates the advantage of multivariate experimental design as a powerful tool for accelerating control and optimization in nanocrystal syntheses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Tuning the Selectivity of Carboxylic Acid–Based Eutectic Solvents for the Dissolution and Electrochemical Separation of Metal Oxides

Extracting metals from natural resources and recovering from waste materials with less-hazardous solvents is essential for sustainable technological advancements. The commonly employed method utilizes harsh chemicals for metal dissolution and the ensuing separation. Here, in this study, we examined the potential of eutectic solvents (types III and IV) as alternative media for the selective dissolution of metals and metal oxides and their subsequent electrochemical separation. Notably, type III eutectics composed of betaine:acetic acid and triazole:lactic acid exhibited excellent solubility for cobalt oxide (24.1 g·L –1 ) and copper oxide (30.5 g·L –1 ), respectively. In comparison, the type IV eutectic mixture of Ca(NO 3 ) 2 ·4H 2 O:acetic acid demonstrated the highest conductivity and lowest viscosity with solubility for both copper oxide (6.1 g·L –1 ) and metallic copper (5.4 g·L –1 from a used electronic circuit). Using a Ca(NO 3 ) 2 ·4H 2 O:acetic acid mixture, copper was selectively dissolved from a waste printed circuit board and subsequently electrodeposited onto a nickel electrode. These findings highlight the tunability of DESs for the selective recovery of metals from electronic waste, offering a promising approach for sustainable metal recycling and resource recovery.

electrodeposition↗
DOE OSTI2025

Cost of Deconstruction Depots for Diversified, Waste-Based Lignocellulosic Sugars Using Distillable Solvents

Transitioning to a bioeconomy that makes use of low-emission and waste feedstocks requires greater flexibility to accommodate seasonal variations and mitigate long-term storage challenges, such as material loss and fire risk. To achieve this goal, biomass deconstruction technologies must efficiently handle diverse feedstocks. Here, we assess the cost of using butylaminea distillable solventto deconstruct 22 different biomass feedstocks: 7 herbaceous, 9 woody, 4 food processing residues, and 2 blends. Lignocellulosic sugar production costs, based on current empirical data, range from $1.3 to 6.1/kg, suggesting that substantial improvements are required to compete with conventional sugars. The high solvent loading (850 g/kg of whole slurry) is a process bottleneck. Lowering the solvent loading to 59 g/kg of whole slurry, demonstrated in an L-scale reactor using poplar biomass, reduces the minimum sugar selling price by 33%. Solvent loading and recovery, solid loading, sugar yield, enzyme use, and delivered biomass cost all play key roles in reaching sugar production costs of $0.45-0.79/kg. Strategic feedstock blending to maximize carbohydrate content, process optimization to improve conversion efficiency, and the selection of low-cost feedstocks are important to advancing feedstock-flexible biorefineries.

TEA↗
DOE OSTI2021

Atomically Dispersed Copper Sites in a Metal–Organic Framework for Reduction of Nitrogen Dioxide

Metal-organic framework (MOF) materials provide an excellent platform to fabricate single-atom catalysts due to their structural diversity, intrinsic porosity, and designable functionality. However, the unambiguous identification of atomically dispersed metal sites and the elucidation of their role in catalysis are challenging due to limited methods of characterization and lack of direct structural information. Here, we report a comprehensive investigation of the structure and the role of atomically dispersed copper sites in UiO-66 for the catalytic reduction of NO 2 at ambient temperature. The atomic dispersion of copper sites on UiO-66 is confirmed by high-angle annular dark-field scanning transmission electron microscopy, electron paramagnetic resonance spectroscopy, and inelastic neutron scattering, and their location is identified by neutron powder diffraction and solid-state nuclear magnetic resonance spectroscopy. The Cu/UiO-66 catalyst exhibits superior catalytic performance for the reduction of NO 2 at 25 °C without the use of reductants. A selectivity of 88% for the formation of N2 at a 97% conversion of NO 2 with a lifetime of >50 h and an unprecedented turnover frequency of 6.1 h-1 is achieved under nonthermal plasma activation. In situ and operando infrared, solid-state NMR, and EPR spectroscopy reveal the critical role of copper sites in the adsorption and activation of NO 2 molecules, with the formation of {Cu(I)···NO} and {Cu···NO 2 } adducts promoting the conversion of NO 2 to N 2 . This study will inspire the further design and study of new efficient single-atom catalysts for NO 2 abatement via detailed unravelling of their role in catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗