Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Voids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Pitch carbon microsphere composite

Petroleum pitch carbon microspheres were prepared by flash heating emulsified pitch and carbonizing the resulting microspheres in an inert atmosphere. Microsphere composites were obtained from a mixture of microspheres and tetraester precursor pyrrone powder. Scanning electron micrographs of the composite showed that it was an aggregate of microspheres bonded together by the pyrrone at the sphere contact points, with voids in and among the microspheres. Physical, thermal, and sorption properties of the composite are described. Composite applications could include use as a honeycomb filler in elevated-temperature load-bearing sandwich boards or in patient-treatment tables for radiation treatment of tumors.

Price, H. L.↗
NASA NTRS1978

Oxide morphology and spalling model for NiAl

A scanning electron microscope equipped with an energy dispersive spectrographic unit was used to study in detail the Al2O3 oxide morphology and oxide-metal interface of a nickel-rich NiAl alloy (Ni-42 at% Al) with a view toward providing information relevant to spalling theories in the MCrAlY system. In addition, the kinetics of spalling was studied for critical evaluation of one of the step-process spall models and for collection of pertinent experimental data. Cyclic oxidation tests were run in 1-atm air at about 1100 C, and isothermal specimens were examined from 2 min to 200 hr of exposure. It is shown that oxide spalling occurs primarily at the oxide-metal interface in an intergranular mode, that crystallographic Kirkendall voids arise as a result of oxidation, and that the fractional area of spalled oxide varies widely in cyclic tests but increases with the square of oxide thickness for isothermal tests. A spall model is developed in the form of a summation series.

Smialek, J. L.↗
NASA NTRS1978

Investigation of the fracture mechanism of Ti-5Al-2.5Sn at cryogenic temperatures

Fractography and metallographic sectioning were used to investigate the influence of microstructure on the fracture mechanism and fracture toughness (KIC) of normal interstitial and extra low interstitial (ELI) Ti-5Al-25Sn at 20 K (-423 F) and 77 K (-320 F). Plates of each grade were mill annealed at 815 C followed by either air or furnace cooling. These variations in composition and cooling rate resulted in differences in the volume fraction and internal structure of the dispersed beta phase and in the ordering of the alpha matrix. The ELI alloys were tougher than the normal interstitial plates. KIC of the furnace-cooled ELI plate was 25% lower than that of the air-cooled ELI material. Variations in cooling rate had no influence of KIC of the normal interstitial alloys. Fractography showed that a large portion of the fracture surfaces were covered with elongated dimples. Metallographic sections of specimens deformed at 77 K showed that these features form at the intersections of slip bands or deformation twins with grain or twin boundaries. Ordering and higher interstitial levels increase the local strain in slip bands resulting in void nucleation at lower macroscopic strains and lower KIC values.

Van Stone, R. H.↗
NASA NTRS1978

Deimos encounter by Viking - Preliminary imaging results

Recent close flybys of Deimos by Viking revealed a smooth-appearing surface void of grooves. Higher-resolution pictures showed that the surface was actually covered with craters but that a regolith filled the smaller craters, giving the smooth appearance. The surface was also covered with boulders and bright streak-like markings analogous to base-surge or ejecta cloud deposits.

Duxbury, T. C.↗
NASA NTRS1980

Repairing ceramic insulating tiles

Fused-silica tiles containing large voids or gauges are repaired without adhesives by plug insertion method. Tiles are useful in conduits for high-temperature gases, in furnaces, and in other applications involving heat insulation.

Dunn, B. R.↗
NASA NTRS1980

Vacuum-and-pressure laminating polymer materials

Lamination setup is used to produce void-free bonds by first employing vacuum to outgas materials and adhesive at temperature below curing temperature and then subjecting assembly to pressure and temperature necessary to cure.

Hoffman, D. R.↗
NASA NTRS1978

Vehicular impact absorption system

An improved vehicular impact absorption system characterized by a plurality of aligned crash cushions of substantially cubic configuration is described. Each consists of a plurality of voided aluminum beverage cans arranged in substantial parallelism within a plurality of superimposed tiers and a covering envelope formed of metal hardware cloth. A plurality of cables is extended through the cushions in substantial parallelism with an axis of alignment for the cushions adapted to be anchored at each of the opposite end thereof.

Knoell, A. C.↗
NASA NTRS1978

Rotatable mass for a flywheel

An improved rotable mass for a flywheel characterized by a plurality of coaxially aligned, contiguous disks mounted on a spin shaft is presented. Each disk of the plurality is formed by a plurality of woven fibers disposed in a plane transversely related to an axis of rotation with the fibers of alternate disks being continuous throughout their length. The mid-portion of the fibers of the remaining disks of the plurality is removed for defining annular voids concentrically related to the spin shaft.

Weyler, G. M., Jr.↗
NASA NTRS1979

The applicability of Brillouin scattering to flow field diagnostics

To fill the void between turbulence theory and experiment; particularly in the flow fields consisting of monatomic gases, for example in wind tunnels, means of measuring fluctuating quantities are needed. In the area of density fluctuation measurement, the optical method of Brillouin scattering was suggested. This was based on the theory, that the Brillouin scattered intensity is proportional to a function of density. In this investigation the potential of this method as a diagnostic tool was studied. Here the density fluctuations in gases were sought. Continuous wave lasers and interferometers were used as the primary illuminating source and scattered light filters respectively.

Laiosa, J.↗
NASA NTRS1979

PSP resins, new materials which can be hardened by thermal treatment for use in composite materials resistant to heat and fire

A class of easy-to-prepare heterocyclic-aromatic polymers which can be used for matrices in reinforced laminates is described. These polymers can be cured after B-staging with very little evolution of volatile materials, and they retain a low melt-viscosity which leads to low-void laminates. Resins are stable at temperatures below 150 C. Properties of composites with various reinforcements, in particular carbon-fiber unidirectional laminates, are described, and the fire behavior of PSP-glass laminates is reported.

Ropars, M.↗
NASA NTRS1976

CMOS array design automation techniques

The design considerations and the circuit development for a 4096-bit CMOS SOS ROM chip, the ATL078 are described. Organization of the ATL078 is 512 words by 8 bits. The ROM was designed to be programmable either at the metal mask level or by a directed laser beam after processing. The development of a 4K CMOS SOS ROM fills a void left by available ROM chip types, and makes the design of a totally major high speed system more realizable.

Lombardi, T.↗
NASA NTRS1979

Fabrication of structural elements

The laminate fabrication procedures and quality assurance ultrasonic C-scan results used for structural elements are described. These procedures are the result of processing eleven lots of graphite/PMR-15 prepreg tape materials and two lots of graphite/NR-150B2. Early processing difficulties with NR-150B2 composites were corrected, permitting the fabrication of quality specimens from either of the two currently prescribed matrix materials. The quality of all deliverable specimens is measured by the control of fiber content, glass transition temperature, and void content, as well as laminate ultrasonic C-scan data.

Darms, F. J., Jr.↗
NASA NTRS1979

NR-150 adhesive development

A polyimide precursor adhesive solution, code-named NR-056X, was developed. It reproducibly gives low void, high strength bond lines at both room temperature and 589K (600 F) using either titanium or graphite/polyimide composite adherends having 12.7 mm (1/2 in.) overlaps. Lap shear samples prepared using this adhesive and composite adherends based on graphite/NR-150B2 were shown to have a high degree of resistance to such adverse environments as air at 589K (600 F), high humidity, methyl ethyl ketone and jet fuel. Bond line toughness was illustrated by the complete resistance to cracking in the wedge-crack propagation test. The available evidence indicates that wide area composite to composite or composite to metal bonding should be feasible.

Blatz, P. S.↗
NASA NTRS1978

Liquid-cooling technology for gas turbines - Review and status

After a brief review of past efforts involving the forced-convection cooling of gas turbines, the paper surveys the state of the art of the liquid cooling of gas turbines. Emphasis is placed on thermosyphon methods of cooling, including those utilizing closed, open, and closed-loop thermosyphons; other methods, including sweat, spray and stator cooling, are also discussed. The more significant research efforts, design data, correlations, and analytical methods are mentioned and voids in technology are summarized.

Van Fossen, G. J., Jr.↗
NASA NTRS1978

Bubbly flow model for the dynamic characteristics of cavitating pumps

The recent experimental transfer matrices obtained by Ng and Brennen (1978) for some axial flow pumps revealed some dynamic characteristics which were unaccounted for by any existing theoretical analysis; their visual observations suggested that the bubbly cavitating flow in the blade passages could be responsible for these effects. A theoretical model of the dynamic response of this bubbly blade-passage flow is described in the present paper. Void-fraction fluctuations in this flow result not only from pressure fluctuations but also because the fluctuating angle of attack causes fluctuations in the rate of production of bubbles near the leading edge. The latter causes kinematic waves which interact through the boundary conditions with the dynamic waves caused by pressure fluctuation. The resulting theoretical transfer functions which results are in good qualitative agreement with the experiments; with appropriate choices of two parameters good quantitative agreement is also obtained. The theoretical model also provides one possible explanation of the observation that the pump changes from an essentially passive dynamic element in the absence of cavitation to a progressively more active element as the extent of cavitation increases.

Brennen, C.↗
NASA NTRS1978

Satellite measurement capabilities for environmental and resource observations

The report summarizes the measurement needs of the major earth applications disciplines which have been culled from a wide range of documental sources. These measurement needs are matched against present or funded-for-launch space-borne measurement capabilities. A brief prognosis of this program's abilities to eliminate or reduce the voids and gaps in performance between the measurement needs and the existing capability is included, based on the author's present understanding of technology.

Nagler, R. G.↗
NASA NTRS1980

Shaping graphite/epoxy stiffeners

Layers of graphite/epoxy, tape stacked on ridges and in grooves of channel like ribs stiffen curved laminates. Twenty-five to 38 layers of tape on each cap and flange are vacuum-bagged into shape and then interleaved with plies of fabric to form light-weight structural members free of wrinkles and voids. Structure could be parts for cars, trucks, and other vehicles.

Cupp, J. L.↗