Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Semiconductor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Gain saturation effects in supermodes of phase-locked semiconductor laser arrays

A basic modal analysis that includes gain saturation effects in phase-locked semiconductor laser arrays is presented. For a particular supermode operation, different lasers in the array emit different amounts of light, and hence their (waveguide) propagation constants are modified differently. Solving the lasers' rate equations self-consistently with the coupled-mode wave equations seems to provide an answer that is in much better agreement with experimental results than the result using only the coupled-mode analysis.

Katz, J.↗
NASA NTRS1985

A new very high voltage semiconductor switch

A new family of semiconductor switches using double injection techniques and compensated deep impurities is described. They have the potential to raise switching voltages a factor of 10 higher (up to 100 kV) than p-n junction devices while exhibiting extremely low (or zero) forward voltage. Several potential power switching applications are indicated.

Sundberg, G. R.↗
NASA NTRS1987

Growing Single Crystals of Compound Semiconductors

Defect reduced by preventing melt/furnace contact and suppressing convention. Large crystals of compound semiconductors with few defects grown by proposed new method. Such materials as gallium arsenide and cadmium telluride produced, with quality suitable for very-large-scale integrated circuits or for large focal-plane arrays of photodetectors. Method used on small scale in Earth gravity, but needs microgravity to provide crystals large enough for industrial use.

Naumann, Robert J.↗
NASA NTRS1986

Zone leveling and solution growth of complex compound semiconductors in space

A research program on complex semiconducting compounds and alloys was completed that addressed the growth of single crystals of CdSe(y)Te(1-y), Zn(x)Cd(1-x)Te, Mn(x)Cd(1-x)Te, InP(y)As(1-y) and CuInSe2 and the measurement of fundamental physico-chemical properties characterizing the above materials. The purpose of this ground based research program was to lay the foundations for further research concerning the growth of complex ternary compound semiconductors in a microgravity environment.

Bachmann, K. J.↗
NASA NTRS1987

Space station power semiconductor package

A package of high-power switching semiconductors for the space station have been designed and fabricated. The package includes a high-voltage (600 volts) high current (50 amps) NPN Fast Switching Power Transistor and a high-voltage (1200 volts), high-current (50 amps) Fast Recovery Diode. The package features an isolated collector for the transistors and an isolated anode for the diode. Beryllia is used as the isolation material resulting in a thermal resistance for both devices of .2 degrees per watt. Additional features include a hermetical seal for long life -- greater than 10 years in a space environment. Also, the package design resulted in a low electrical energy loss with the reduction of eddy currents, stray inductances, circuit inductance, and capacitance. The required package design and device parameters have been achieved. Test results for the transistor and diode utilizing the space station package is given.

Balodis, Vilnis↗
NASA NTRS1986

Phase-locked arrays of semiconductor injection lasers - A review

Arrays of phase-locked semiconductor injection lasers integrated monolithically on the same substrate are one potential method for obtaining higher power levels (in controlled mode operation) than those available from a single laser. This paper describes basic methods for analyzing the electrical and optical characteristics of these devices, and discusses problems associated with maintaining a stable operation in a single array mode ('supermode'). Various experimental results are presented and compared with theory.

Katz, Joseph↗
NASA NTRS1987

Response of a metal-oxide-semiconductor field-effect transistor to a cosmic-ray ion track

A cosmic-ray ion track passing perpendicularly through the oxide layer of an enhancement-mode metal-oxide-semiconductor field-effect transistor (MOSFET) forms a conducting path, the resistance of which is proportional to the stopping power of the cosmic ion and independent of the cross-sectional area of the ion track. The voltage across the oxide capacitance may drop below the threshold voltage if the gate bias is sufficiently low or if the external resistance in the gate-source circuit is sufficiently high. The first of a pair of MOSFETs forming a flip-flop circuit may thus be turned off, and the second transitor may turn on, providing it has a sufficiently short delay time, thereby completing a single-event upset.

Benumof, Reuben↗
NASA NTRS1988

Phase-Locked Semiconductor Lasers With Separate Contacts

Individual current feeds enable better uniformity and flexible control. Separate contacts for lasers in array enable control of output radiation pattern and compensation of manufacturing nonuniformities among lasers. Concept of separate current control described for two-laser array in "Semiconductor Laser Phased Array" (NPO-15963).

Katz, Joseph↗
NASA NTRS1987

Integrated photo-responsive metal oxide semiconductor circuit

An infrared photoresponsive element (RD) is monolithically integrated into a source follower circuit of a metal oxide semiconductor device by depositing a layer of a lead chalcogenide as a photoresistive element forming an ohmic bridge between two metallization strips serving as electrodes of the circuit. Voltage from the circuit varies in response to illumination of the layer by infrared radiation.

Jhabvala, Murzban D.↗
NASA NTRS1988

Heteroepitaxial growth of 3-5 semiconductor compounds by metal-organic chemical vapor deposition for device applications

The purpose of this research is to design, install and operate a metal-organic chemical vapor deposition system which is to be used for the epitaxial growth of 3-5 semiconductor binary compounds, and ternary and quaternary alloys. The long-term goal is to utilize this vapor phase deposition in conjunction with existing current controlled liquid phase epitaxy facilities to perform hybrid growth sequences for fabricating integrated optoelectronic devices.

Collis, Ward J.↗
NASA NTRS1987

Nonlinear intersubband optical absorption in a semiconductor quantum well

The third-order nonlinear intersubband absorption in a semiconductor quantum well is studied theoretically using the density matrix formalism including intrasubband relaxation. It is shown that the peak absorption is reduced by half for an optical intensity 1 MW/sq cm for the well size L = 126.5 A with 3.0 x 10 to the 16th/cu cm electrons.

Ahn, D.↗
NASA NTRS1987

Semiconductor alloys - Structural property engineering

Semiconductor alloys have been used for years to tune band gaps and average bond lengths to specific applications. Other selection criteria for alloy composition, and a growth technique designed to modify their structural properties, are presently considered. The alloys Zn(1-y)Cd(y)Te and CdSe(y)Te(1-y) are treated as examples.

Sher, A.↗
NASA NTRS1987

Results from a compound semiconductor crystal growth experiment in a low gravity environment

A directional solidification experiment in the compound semiconductor lead tin telluride has been carried out in a low-gravity environment on board the Space Shuttle during a flight in October, 1985. Optical etching techniques and concentration profiles from wavelength dispersive electron microscopy indicate that there was a significant amount of convection during the solidifcation of the sample. A preliminary hypothesis of this result, that even at gravity levels on the order of 0.0001 g, the convective forces can be significant compared to mass transport due to diffusion, is being tested.

Crouch, Roger K.↗
NASA NTRS1988

Plasma deposition of amorphous hydrogenated carbon films on III-V semiconductors

Amorphous hydrogenated carbon films were grown on GaAs, InP and fused silica substrates using plasmas generated from hydrocarbon gases. Methane and n-butane sources were utilized. The effects of flow rate and power density on film growth were investigated. Carbon was the major constituent in the films. The degree of asymmetry at the carbon-semiconductor interface was approximately independent of the power density. Different H-C bonding configurations were detected by the technique of secondary-ion mass spectrometry. Band gaps up to 3 eV were obtained from optical absorption studies. Breakdown strengths as high as 600 MV/m were measured.

Pouch, John J.↗
NASA NTRS1987

Structure-property relationships in semiconductor alloys

It is presently noted that the atomic distribution of constituents in semiconductor alloys is never truly random, since there are always interactions giving rise to correlations whose degree and character depend on which interactions are dominant, as well as on the growth conditions. Although most of the interactions that can be expected to generate correlations have been identified, the fact that not all have been thus far treated exhaustively leaves several details unclear. A characterization of the primary effects in general terms is accordingly achieved.

Sher, A.↗
NASA NTRS1988

Models of second-order effects in metal-oxide-semiconductor field-effect transistors for computer applications

Second-order effects in metal-oxide-semiconductor field-effect transistors (MOSFETs) are important for devices with dimensions of 2 microns or less. The short and narrow channel effects and drain-induced barrier lowering primarily affect threshold voltage, but formulas for drain current must also take these effects into account. In addition, the drain current is sensitive to channel length modulation due to pinch-off or velocity saturation and is diminished by electron mobility degradation due to normal and lateral electric fields in the channel. A model of a MOSFET including these considerations and emphasizing charge conservation is discussed.

Benumof, Reuben↗
NASA NTRS1987

Refractory semiconductors for high temperature thermoelectric energy conversion

Thermoelectric energy conversion utilizing nuclear heat sources has been employed for several decades to generate power for deep space probes. In the past, lead telluride and, more recently, silicon-germanium alloys have been the prime choices as thermoelectric materials for this application. Currently, a number of refractory semiconductors are under investigation at the Jet Propulsion Laboratory in order to produce power sources of higher conversion efficiency and, thus, lower mass per unit of power output. Included among these materials are improved Si-Ge alloys, rare earth compounds and boron-rich borides. The criteria used to select thermoelectric materials, in general, and the above materials, in particular, will be discussed. The current state of the art and the accomplishments to date in thermoelectric materials research will be reviewed.

Wood, Charles↗