SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Measuring instrument for amorphous and polycrystalline materials resistivity and Seebeck coefficient as function of temperature and pressure
Solar wind-magnetosphere interaction modes from Explorer 33 and 35 interplanetary plasma and magnetic field data
Mitosis control assuming existence of functional relationship between potential level and mitotic activity, using classical membrane potential theory
Architectural and environmental design tools for space system habitability, discussing work and living areas, hygienic facilities, etc
A heat-transfer experiment was flight conducted on a 5 deg half-angle cone, 396.2 cm (13 ft) in length, as it entered the sensible atmosphere under laminar, transitional, and turbulent boundary-layer conditions at a free-stream Mach number of about 20. Accurate turbulent-heat-transfer data with natural transition were obtained for correlation with theories in regions of simultaneous high Mach number, Reynolds number, enthalpy, and total-to-wall temperature ratio. Temperatures were measured at four depths through the 15.24-mm-thick (0.600-in.) beryllium wall. Experimental heating rates at 20 stations on the cone were determined independently from the outermost temperature measurement and from the temperature measurement at the second depth by a single-thermocouple inverse method and also from the temperature histories at all four depths by an integral method. The thermal data analysis procedure, associated problems, and results are presented herein.
On the Gemini 5 mission, acquisition and tracking was performed by the use of celestial bodies as aiming points. However, distant photography of the REP was not possible because of spacecraft electrical power difficulties which occurred after REP ejection. Terrestrial photography was accomplished within the limitations imposed by weather conditions and spacecraft electrical and thruster problems. The photographs that were obtained were significant only as an element of the data to be used in technique evaluation. The other data were time-correlated position and pointing information, atmospheric conditions, sun angle, exposure settings, and the flight logs and verbal comments of the crewmembers. The photographs shown are representative of those that facilitated evaluation of the acquisition and tracking techniques that were used in these three experiments.
When a supernova occurs, there is a release of sufficient energy to ionize a large amount of the surrounding material. The Gum nebula is an example of this process.
An analytical-empirical model is presented of turbine erosion that fits and explains experience in both steam and metal vapor turbines. Because of the complexities involved in analyzing turbine problems, in a pure scientific sense, it is obvious that this goal can be only partially realized. Therefore, emphasis is placed on providing a useful model for preliminary erosion estimates for given configurations, fluids, and flow conditions.
Fundamental failure mechanisms in carbon-epoxy composites were studied for more reliable prediction of the performance of these materials. Single and multiple fiber specimens were tested under tensile loads, and the sequence of failure events was observed. Parameters such as resin crack sensitivity, fiber surface treatment and variations in fibers from batch to batch are being evaluated. The analysis of bulk composite fracture processes using acoustic emission techniques is being studied in order to correlate microscopic observations with bulk composite behavior. Control of the fracture process through matrix and interface modification is being attempted, and study of failure processes in composite/metal specimens is being conducted. Most of the studies involved DEN 438 epoxy novolac as the matrix, but some experiments are now underway using the higher temperature resin ERLA 4617.
Results of an experimental aerodynamic investigation of the H-33 space orbiter are presented. The investigation was undertaken to determine static aerodynamic characteristics of the orbiter at a Mach number of 0.17. These data were determined by employing a 1/25 scale model of the orbiter for pitch and yaw variations of -4 degrees to 24 degrees to 15 degrees, respectively. Investigations were conducted in the 7 - by - 10 foot wind tunnel.
The catastrophic disintegration in air at intermediate temperatures of refractory materials which are very resistant to oxidation at high temperatures is known as pest. A study was undertaken to determine whether the mechanism proposed for pest failure in silicides might also be responsible for pest failure in NbAl3. The aim was to correlate oxidation kinetics in the range where disintegration of NbAl3 is observed with delayed failure data obtained under similar conditions. Studies were also undertaken to develop some understanding of deformation mechanisms in both silicides and aluminides.
Investigations of triangulation nets and scaling are reported. Adjustment of the BC-4 worldwide geometric satellite triangulation net is described, along with procedures for correcting type II data and the contents of magnetic tapes containing data from the Pageos network. Computational steps for the further reduction of partially reduced satellite image plate coordinates are outlined. The problem of improving existing triangulation systems by means of satellite super-control points was studied. The SAO-69 geometric solution was scaled with C-band radar data, resulting in SAO and C-band adjustment compatible with one another in the Western Hemisphere. The North America solution NA-6, obtained from GEOS 1 data, was readjusted with new heights as constraints on all 30 optical stations and is referred to as the NA-8 solution.
Turbine geometric, flow, energy transfer, efficiency, and performance characteristics are considered by the use of definitions, diagrams, and dimensionless parameters. Emphasis is placed on the determination of the fluid velocity as it passes from one blade row to the next. The general methods for constructing velocity diagrams and relating them to the work and flow capacity of the turbine are discussed.
Preliminary designs of the Bioexplorer spacecraft, developed in an earlier study program, are analyzed and updated to conform to a new specification which includes use of both the Scout and the space shuttle vehicle for launch. The updated spacecraft is referred to as bioresearch module. It is capable of supporting a variety of small biological experiments in near-earth and highly elliptical earth orbits. The baseline spacecraft design is compatible with the Scout launch vehicle. Inboard profile drawings, weight statements, interface drawings, and spacecraft parts and aerospace ground equipment lists are provided to document the design. The baseline design was analyzed to determine the design and cost impact of a set of optional features. These include reduced experiment power and thermal load, addition of an experiment television monitor, and replacement of VHF with S-band communications. The impact of these options on power required, weight change and cost is defined.
The results are presented of observations by the University of Texas of the 15.3 GHz experiment associated with the ATS-5 satellite and of related experiments designed to provide information on earth-satellite communication links at 15.3 and 31.65 GHz. The 15.3 GHz transmissions were observed at Austin, Texas over an eighteen month interval primarily during periods of rain. Measurements were also made at Mount Locke, near Fort Davis, Texas but only for a period of two months. Essentially continuous measurements were made at Austin, Texas of the sky temperature at 35 GHz looking in the direction of the ATS-5 satellite over an interval of four months. Point-to-point transmissions over the earth's surface at 15 and 35 GHz and various meteorological parameters were studied as possible means of predicting performance over a satellite-earth path.
The first-order model of acoustic emission from fiber composites, based on filament breaking rates, is cast into a normalized form useful for correlating experimental data. The general features of the normalized model are shown.
The molecular Stark effect and its application to the modulation of infrared laser radiation have been investigated both theoretically and experimentally. Using a density matrix approach, a quantum mechanical description of the effect of a time-varying electric field on the absorption coefficient and refractive index of a molecular gas near an absorption line has been formulated. For modulation applications a quantity known as the ?modulation depth' is of prime importance. Theoretical expressions for the frequency dependence of the modulation depth show that the response to the frequency of a time-varying Stark field is separated into a nondispersive and a dispersive region, depending on whether the modulating frequency is less than or greater than the homogeneous absorption linewidth. Experimental results showing nondispersive modulation at frequencies to 30 MHz are presented. In addition it is shown that the response of modulation depth to Stark field amplitude is separated into linear and nonlinear regions, the field at which nonlinearities begin being determined by the absorption spectrum of the molecule being used.
Failure mechanisms in carbon-epoxy composites are identified as a basis for more reliable prediction of the performance of these materials. The approach involves both the study of local fracture events in model specimens containing small groups of filaments and fractographic examination of high fiber content engineering composites. Emphasis is placed on the correlation of model specimen observations with gross fracture modes. The effects of fiber surface treatment, resin modification and fiber content are studied and acoustic emission methods are applied. Some effort is devoted to analysis of the failure process in composite/metal specimens.