Results for “improvement” — Page 28

NASA NTRS2021

MODIS Reflective Solar Bands Calibration Improvements for Collection 7

Calibration of Terra and Aqua MODIS reflective solar bands (RSB) has evolved significantly since the launch of the first MODIS instrument on the Terra satellite more than 21 years ago. In NASA’s current Collection 6 and 6.1 Level 1B products (C6/C6.1 L1B), the RSB calibration algorithm continues to rely primarily on the onboard solar diffuser to calibrate the instrument gain. Lunar observations are used to track on-orbit changes in the response versus scan angle (RVS), and data from pseudo-invariant desert sites are used to apply adjustments to the gain and RVS calibration for select bands. The resulting reflectance products have in general shown a very stable performance. In recent years, some performance degradation has been noted for a few bands and algorithm changes have been tested to further improve the calibration accuracy for the upcoming Collection 7 (C7) L1B reprocess. In this paper, we present the MODIS RSB calibration improvements that will be included in C7. Major improvements include: applying polarization correction to the desert data before using it to generateRVS for Terra bands 8, 9, 3, and 10; using ocean scene data and an interband calibration approach to correct for long-term drift of Terra bands 11 and 12; applying an updated crosstalk correction to Terra SWIR bands over the entire mission; and using data from deep convective clouds in Terra SWIR band calibration, including the addition of time-dependent RVS for bands 5 and 26. All other minor calibration changes are also covered. Overall, the reflectance differences at nadir between C6.1 and C7 are within a few percent, though the differences increase in some cases at large scan angles. The Terra visible (3, 8-12) and SWIR bands (5-7, 26) have the most significant improvements. For all other Terra bands and all Aqua bands, the C7-C6.1 differences are mostly within 1%

MODIS↗

NASA NTRS2021

Improving Cross-track Scanning Radiometers’ Precipitation Retrieval over Ocean by Morphing

Previous studies showed that conical scanning radiometers greatly outperform cross-track scanning radiometers for precipitation retrieval over ocean. This study demonstrates a novel approach to improve precipitation rates at the cross-track scanning radiometers’ observation time by propagating the conical scanning radiometers’ retrievals to the cross-track scanning radiometers’ observation time. The improved precipitation rate is a weighted average of original cross-track radiometers’ retrievals and retrievals propagated from a conical scanning radiometer. The cross-track scanning radiometers include the Advanced Technology Microwave Sounder (ATMS) on board the SNPP satellite and four Microwave Humidity Sounders (MHSs). The conical scanning radiometers include the Advanced Microwave Scanning Radiometer 2 (AMSR2) and three Special Sensor Microwave Imager/Sounders (SSMISs), while the precipitation retrievals from the Global Precipitation Measurement (GPM) Microwave Imager (GMI) are taken as the reference. Results show that the morphed precipitation rates agree much better with the reference. The degree of improvement depends on several factors, including the propagated precipitation source, the time interval between the cross-track scanning radiometer and the conical scanning radiometer, the precipitation type (convective versus stratiform), the precipitation events’ size, and the geolocation. The study has potential to greatly improve high-impact weather systems monitoring (e.g., hurricanes) and multisatellite precipitation products. It may also enhance the usefulness of future satellite missions with cross-track scanning radiometers on board.

Yalei You↗

NASA NTRSDate not supplied

CERES FluxByCldTyp NB2BB Fluxes Improvement based on Deep Neural Network

The NASA Clouds and the Earth's Radiant Energy System (CERES) product provides over 20 years of accurately observed top-of-the-atmosphere (TOA) and surface flux data record for climate monitoring and diagnostic studies. The interaction between clouds and radiation interaction is a key factor that dominate climate feedbacks but is not well understood. To further advance our understanding of the cloud-radiation interaction, a new CERES FluxByCldTyp (FBCT) product has been developed that contains radiative fluxes by cloud-type, which can provide more stringent constraints when validating models and reveal more insight into the interactions between clouds and climate. For CERES partly cloudy and multiple cloud-type footprints, the FBCT product utilizes Moderate Resolution Imaging Spectroradiometer (MODIS) narrow-band (NB) imager channel radiances partitioned by cloud-type within a CERES footprint to estimate the cloud-type broadband fluxes. The MODIS multi-channel derived broadband fluxes were compared with the CERES observed footprint fluxes and were found to be within 1% and 2.5% for LW and SW, respectively, as well as being mostly free of cloud property dependencies. The FBCT all-sky and clear-sky monthly averaged fluxes were found to be consistent with the CERES SSF1deg product. This study takes advantage of recent progress in machine learning (ML) field by applying deep neural network algorithm to improve fluxes based on MODIS NB radiances. The preliminary study shows ML produce are an improvement over the current FBCT Edition 4 NB2BB algorithm. Furthermore, unlike Ed4 NB2BB, the new ML method convert NB radiances directly to broadband fluxes. For future Ed5, new NB radiances are proposed and used by ML to improve fluxes calculation. Prelimary results show significant LW improvement.

Moguo Sun↗

NASA NTRSDate not supplied

US-EUSST SSA Data Exchange for Improved Orbital Safety

Data sharing and exchange among different Space Situational Awareness (SSA) data collectors/providers is frequently discussed as a mechanism to improve the accuracy and precision of orbital safety products. Indeed, at the conceptual level this claim is quite sensible: objects with more tracking, and thus presumably better distribution of that tracking about their orbit, should produce updates with smaller epoch errors and more realistic covariances at epoch, which should then translate into better performance in prediction and thus improved close approach calculations. However, this thesis has not been verified with any large study involving two different data providers, through which the amount of realized improvement can be quantified and, perhaps more importantly, the logistics of effecting observation data sharing in a regularized way can be established and circulated to assist others. To create rubrics for helpful data sharing for conjunction assessment applications, and to collect empirical data on the improvements achieved through sharing of measurement data, the US Office of Space Commerce and the European Union Space Surveillance and Tracking (EUSST) Support Framework have embarked on a joint experiment to collect and exchange satellite metric observations on selected satellites of interest over an experimental period. Each entity will perform orbit determination with their own observations, the other entity’s observations, and with both observation data sets combined. The product results will be compared with each other, showing differences attributable both to the three different data groups and to the two entities’ different approaches to orbit determination. The exemplar satellites include both objects that have external precision reference ephemerides and those that do not, allowing the experiment to exercise both precision-comparison and assimilative-comparison techniques. The present reporting will give preliminary results and a set of lessons learned for data sharing; a second presentation later in 2023 will provide a full accounting of the experiment’s results. The hope is that, through this work, a pathway can be established for the expeditious and fruitful sharing among collection entities, both commercial and governmental.

space situational awareness↗

NASA NTRS2023

Improvement of Pressure Sensitive Paint in A Cryogenic Oxygen-Poor Environment

This report details specific improvements to the use of Pressure Sensitive Paint (PSP) in an oxygen-poor environment, with an emphasis on cryogenic PSP in the National Transonic Facility (NTF). For this work, several improvements to the application of PSP and data acquisition have been investigated in the 0.3-m Transonic Cryogenic Tunnel (generally considered a pilot facility for the NTF) and these results will be presented. In addition, several improvements to the existing PSP system at NTF are presented as well as a brief section on further improvements that can be investigated.

Cryogenic ground testing↗

NASA NTRSDate not supplied

Flux Improvement based on Machine Learning for the CERES FluxByCldTyp Data Product

The NASA Clouds and the Earth's Radiant Energy System (CERES) product provides over 20 years of accurately observed top-of-the-atmosphere (TOA) and surface flux data record for climate monitoring and diagnostic studies. The interaction between clouds and radiation interaction is a key factor that dominate climate feedbacks but is not well understood. To further advance our understanding of the cloud-radiation interaction, a new CERES FluxByCldTyp (FBCT) product has been developed that contains radiative fluxes by cloud-type, which can provide more stringent constraints when validating models and reveal more insight into the interactions between clouds and climate. For CERES partly cloudy and multiple cloud-type footprints, the FBCT product utilizes Moderate Resolution Imaging Spectroradiometer (MODIS) narrow-band (NB) imager channel radiances partitioned by cloud-type within a CERES footprint to estimate the cloud-type broadband fluxes. The MODIS multi-channel derived broadband fluxes were compared with the CERES observed footprint fluxes and were found to be within 1% and 2.5% for LW and SW, respectively, as well as being mostly free of cloud property dependencies. The FBCT all-sky and clear-sky monthly averaged fluxes were found to be consistent with the CERES SSF1deg product. This study takes advantage of recent progress in machine learning (ML) field by applying deep neural network algorithm to improve fluxes based on MODIS NB radiances. The preliminary study shows ML produce are an improvement over the current FBCT Edition 4 NB2BB algorithm. Furthermore, unlike Ed4 NB2BB, the new ML method convert NB radiances directly to broadband fluxes. For future Ed5, new NB radiances are proposed and used by ML to improve fluxes calculation. Prelimary results show significant LW improvement.

Moguo Sun↗

NASA NTRSDate not supplied

Recent Improvements and Verification of A Full Body Model in Opensim

BACKGROUND: The dynamic feasibility [1,2] criterion, that the subject’s Center of Pressure (COP) be located within the Base of Support (BOS) which outlines the feet, has aided in assessing the stability of human motion recorded on earth while performing the recorded tasks in lunar gravity or as countermeasures exercises on a vibration isolation and stabilization system in microgravity. The convex hull of the BOS on the platform under the subject’s feet was estimated using virtual markers on the feet of the scaled subject model. The COP was calculated using the ground reaction forces and moments determined from motion capture data with biomechanical modeling tools [3]. Occasionally, large-amplitude oscillatory spikes or “artifacts” were observed in the subject’s linear and angular momentum derivatives, affecting some COP data derived from motion capture. The purpose of this investigation was to assess and improve the accuracy of model scaling and BOS estimation as well as to determine the efficacy of model adjustments in mitigating artifacts influencing motion capture-derived ground reaction force and COP results. METHODS: To aid evaluation of proposed process and model updates, motion capture data were collected for two subjects during unit test and range of motion trials, lunar tasks, and countermeasures exercise motions. Markers were added to the full body Plug-in Gait marker set [4] during data collection. New markers were placed on the front, back, sides, and top of the head to improve scaling using distances between marker pairs. Medial elbow markers were added to stabilize the upper arm during OpenSim Inverse Kinematics (IK) [5]. Finally, markers were added on the outer edge of the heels and on the outside edges of the first and last toes on each foot. These additional foot markers were made available to test new automated foot scaling techniques and to calculate the error between the subject’s estimated and recorded BOS. The modified unscaled OpenSim Full Body Rajagopal Model [6,7] was adjusted using some previously investigated techniques [8] to mitigate rapid shifts in joint angles occurring during IK, as these were found to cause the spike artifacts observed in subsequent stages of analysis. Since OpenSim models use Euler angles and rotation sequences, the arm axes of rotation were adjusted, and the pelvis order of rotation was changed to minimize the likelihood of encountering “gimbal lock” during common human motion. The model clavicle, arm, elbow, wrist, pelvis, and ankle angle limits were adjusted to better accommodate the full human range of motion seen in exercise and lunar data. The shoulder joint center was calculated using a “pivoting” algorithm [9], and both shoulder joint center and upper arm markers were included during IK to provide additional shoulder stability on a case-by-case basis. The quality of IK results was assessed by three criteria: minimizing error between recorded motion capture markers and model markers, checking for reasonable rates of change in joint angles between fames (i.e., no IK artifacts), and ensuring the absence of spikes in the inertial forces and angular momentum derivatives calculated using a custom OpenSim plugin [10]. RESULTS: The additional markers placed on the subject during data collection allowed the head and feet to be scaled more accurately using distances between new marker pairs. Scaling with BOS markers placed on the subject and removing the limit on subtalar angle resulted in more accurate BOS determination. Unrealistically large changes in joint angles between frames could be reduced by including clavicle, sternum, and medial elbow markers during IK. In cases with large arm ranges of motion, results could be further improved by running IK using medial elbow and virtual shoulder joint center markers. Model adjustments significantly improved the IK results affecting COP calculation and increased the accuracy of BOS estimation.

C A Bell↗

NASA NTRSDate not supplied

Improvement of Radiative Fluxes for the CERES FluxByCldTyp Data Product Based on Machine Learning Technique

The NASA Clouds and the Earth's Radiant Energy System (CERES) product provides over 20 years of accurately observed top-of-the-atmosphere and surface flux data for climate studies. The interaction between clouds and radiation interaction is a key factor that dominate climate feedbacks but is not well understood. To further advance our understanding of the cloud-radiation interaction, a new CERES FluxByCldTyp (FBCT) product has been developed that contains radiative fluxes by cloud-type, which can provide more stringent constraints when validating models. The FBCT product utilizes Moderate Resolution Imaging Spectroradiometer (MODIS) narrow-band (NB) imager channel radiances partitioned by cloud-type within a CERES footprint to estimate their broadband fluxes. The MODIS multi-channel derived broadband fluxes were compared with the CERES observed footprint fluxes and were found to be within 1% and 2.5% for LW and SW, respectively, as well as being mostly free of cloud property dependencies. The FBCT all-sky and clear-sky monthly averaged fluxes were found to be consistent with the CERES SSF1deg product. This study takes advantage of recent progress in machine learning (ML) field by applying deep neural network algorithm to improve fluxes based on MODIS NB radiances. The preliminary study shows ML produce are an improvement over the current FBCT Edition 4 NB2BB algorithm. Furthermore, unlike Ed4 NB2BB, the new ML method convert NB radiances directly to broadband fluxes. For future Ed5, new NB radiances are proposed and used by ML to improve fluxes calculation. Preliminary results show significant LW improvement.

Sun, Moguo↗

NASA NTRSDate not supplied

Improvement of Radiative Fluxes for the CERES FluxByCldTyp Data Product Based on Machine Learning Technique

The NASA Clouds and the Earth's Radiant Energy System (CERES) product provides over 20 years of accurately observed top-of-the-atmosphere (TOA) and surface flux data record for climate monitoring and diagnostic studies. The interaction between clouds and radiation interaction is a key factor that dominate climate feedbacks but is not well understood. To further advance our understanding of the cloud-radiation interaction, a new CERES FluxByCldTyp (FBCT) product has been developed that contains radiative fluxes by cloud-type, which can provide more stringent constraints when validating models and reveal more insight into the interactions between clouds and climate. For CERES partly cloudy and multiple cloud-type footprints, the FBCT product utilizes Moderate Resolution Imaging Spectroradiometer (MODIS) narrow-band (NB) imager channel radiances partitioned by cloud-type within a CERES footprint to estimate the cloud-type broadband fluxes. The MODIS multi-channel derived broadband fluxes were compared with the CERES observed footprint fluxes and were found to be within 1% and 2.5% for LW and SW, respectively, as well as being mostly free of cloud property dependencies. The FBCT all-sky and clear-sky monthly averaged fluxes were found to be consistent with the CERES SSF1deg product. This study takes advantage of recent progress in machine learning (ML) field by applying deep neural network algorithm to improve fluxes based on MODIS NB radiances. The preliminary study shows ML produce are an improvement over the current FBCT Edition 4 NB2BB algorithm. Furthermore, unlike Ed4 NB2BB, the new ML method convert NB radiances directly to broadband fluxes. For future Ed5, new NB radiances are proposed and used by ML to improve fluxes calculation. Prelimary results show significant LW improvement.

Moguo Sun↗

NASA NTRSDate not supplied

Regional Impacts of Ice Sheet Surface Representation Improvements in an Earth System Model

Ice sheet surface conditions and their subsequent impact on surface mass balance play an important role in ice sheet dynamics and ice sheet interaction with the overlying atmosphere and surrounding ocean. The NASA Global Modeling and Assimilation Office’s (GMAO) Goddard Earth Observing System (GEOS) ecosystem of models and reanalyses model ice sheet and glacier surface mass balance with a moderately complex snow and ice module, including prognostic surface albedo evolution, fractional snow cover, and snowpack hydrology and meltwater retention. With this configuration, Greenland near surface air temperatures and ice sheet melt are well represented in MERRA-2, GMAO’s current atmospheric reanalysis; however, the similarity to observations in some regions is due, in part, to compensating biases in surface energy budget. Recent improvements to GEOS’ cloud microphysics and longwave radiation parameterizations reduced biases in surface net longwave radiation and exacerbated surface net shortwave radiation biases, effectively increasing near surface temperatures and melting, particularly during the summer months. Here, we demonstrate the Earth system response to an improved representation of the ice sheet surface focused on minimizing the surface energy biases and increasing spatial and temporal representativeness. New changes to the surface albedo parameterization, including the introduction of a prognostic aerosol darkening scheme, help mitigate shortwave biases, while modifications to surface roughness characteristics improve near surface sensible heat fluxes. Focusing on the Arctic and Greenland, we examine the combined impact on these changes on regional weather conditions and ice sheet surface mass balance using a high resolution atmospheric only experiment, and we use a coupled model configuration to assess the impact on oceanic conditions and subseasonal-to-seasonal prediction. Overall, these improvements increase modeled ice sheet surface realism and provide a strong basis for more accurate ice sheet mass balance in GMAO’s future reanalyses and forecasting systems.

Lauren C Andrews↗

NASA NTRSDate not supplied

On Generalizably Improving RANS Predictions of Flow Separation and Reattachment

This work presents progress in an ongoing data-driven turbulence modeling effort at NASA Langley Research Center to improve predictions for separated flows. Two augmentation strategies are presented – one to improve predictions for the point of reattachment after smooth-body separation, and another to improve predictions for flow separation due to prolonged adverse pressure gradients. The reattachment augmentation was inspired from lessons learned during attempts at using field inversion and machine learning (FIML); however, it is prescribed as a conventional analytic closed-form expression. Results show that, when introduced into the SST k-w model, it shortens the otherwise overpredicted separation bubble length for three cases characterized by different Reynolds numbers and flow geometries. The second augmentation, which addresses flow separation under prolonged adverse pressure gradients, is inferred via FIML and applied as a neural network within the Spalart-Allmaras model. It uses features that are chosen such that the presented results show an improved predictive accuracy for the training case without affecting other cases where the augmentation is not needed. Further testing is required to establish the generalizability of this augmentation. The rationale behind the chosen features that serve as inputs to both these augmentations is also presented for the benefit of the reader.

machine learning↗

NASA NTRSDate not supplied

Improving Radiative Fluxes for the CERES FluxByCldTyp Data Product Using Deep Neural Network

The NASA Clouds and the Earth's Radiant Energy System (CERES) product provides over 20 years of accurately observed top-of-the-atmosphere (TOA) and surface flux data record for climate monitoring and diagnostic studies. The interaction between clouds and radiation interaction is a key factor that dominate climate feedbacks but is not well understood. To further advance our understanding of the cloud-radiation interaction, a new CERES FluxByCldTyp (FBCT) product has been developed that contains radiative fluxes by cloud-type, which can provide more stringent constraints when validating models and reveal more insight into the interactions between clouds and climate. For CERES partly cloudy and multiple cloud-type footprints, the FBCT product utilizes Moderate Resolution Imaging Spectroradiometer (MODIS) narrow-band (NB) imager channel radiances partitioned by cloud-type within a CERES footprint to estimate the cloud-type broadband fluxes. The MODIS multi-channel derived broadband fluxes were compared with the CERES observed footprint fluxes and were found to be within 1% and 2.5% for LW and SW, respectively, as well as being mostly free of cloud property dependencies. The FBCT all-sky and clear-sky monthly averaged fluxes were found to be consistent with the CERES SSF1deg product. This study takes advantage of recent progress in machine learning (ML) field by applying deep neural network algorithm to improve fluxes based on MODIS NB radiances. The preliminary study shows ML produce are an improvement over the current FBCT Edition 4 NB2BB algorithm. Furthermore, unlike Ed4 NB2BB, the new ML method convert NB radiances directly to broadband fluxes. For future Ed5, new NB radiances are proposed and used by ML to improve fluxes calculation. Preliminary results show significant LW improvement.

Sun, Moguo↗

NASA NTRSDate not supplied

Regional Impacts of Ice Sheet Surface Representation Improvements in an Earth System Model

Ice sheet surface conditions and their subsequent impact on surface mass balance play an important role in ice sheet dynamics and ice sheet interaction with the overlying atmosphere and surrounding ocean. The NASA Global Modeling and Assimilation Office’s (GMAO) Goddard Earth Observing System (GEOS) ecosystem of models and reanalyses model ice sheet and glacier surface mass balance with a moderately complex snow and ice module, including prognostic surface albedo evolution, fractional snow cover, and snowpack hydrology and meltwater retention. With this configuration, Greenland near surface air temperatures and ice sheet melt are well represented in MERRA-2, GMAO’s current atmospheric reanalysis; however, the similarity to observations in some regions is due, in part, to compensating biases in surface energy budget. Recent improvements to GEOS’ cloud microphysics and longwave radiation parameterizations reduced biases in surface net longwave radiation and exacerbated surface net shortwave radiation biases, effectively increasing near surface temperatures and melting, particularly during the summer months. Here, we demonstrate the Earth system response to an improved representation of the ice sheet surface focused on minimizing the surface energy biases and increasing spatial and temporal representativeness. New changes to the surface albedo parameterization, including the introduction of a prognostic aerosol darkening scheme, help mitigate shortwave biases, while modifications to surface roughness characteristics improve near surface sensible heat fluxes. Focusing on the Arctic and Greenland, we examine the combined impact on these changes on regional weather conditions and ice sheet surface mass balance using a high resolution atmospheric only experiment, and we use a coupled model configuration to assess the impact on oceanic conditions and subseasonal-to-seasonal prediction. Overall, these improvements increase modeled ice sheet surface realism and provide a strong basis for more accurate ice sheet mass balance in GMAO’s future reanalyses and forecasting systems.

Lauren C. Andrews↗

NASA NTRS2024

Improved Soil Moisture Estimation and Detection of Irrigation Signal By Incorporating SMAP Soil Moisture Into the Indian Land Data Assimilation System (ILDAS)

Land surface models have facilitated the estimation of soil moisture over a range of spatiotemporal scales. However, limitations in model parameterization and under-representation of anthropogenic processes restrict their ability to estimate local-scale soil moisture variability, especially over irrigated areas. Assimilation of satellite-based soil moisture retrievals into land surface models can be a viable approach to overcome these constraints, specially over highly irrigated countries such as India, where such applications are rare. Additionally, large-scale validation of modeled soil moisture has been limited over India till now due to lack of a representative station network. By assimilating Soil Moisture Active Passive (SMAP)-based estimates into the state-of-the-art Indian Land Data Assimilation System (ILDAS) and combining with a new soil moisture station network of more than 200 stations, this study demonstrates improved soil moisture estimations and capture of irrigation signals over the region. The Noah-MP land surface model is forced by multiple local and global meteorological datasets and Ensemble Kalman Filter (EnKF) is used for assimilation of soil moisture. Comparison of open-loop and data assimilated soil moisture against station soil moisture data shows relative spatial mean improvement of 0.0178 in correlation and 0.0029 m3/m3 in RMSE. Further statistical comparison with in-situ data has also shown better results over most of the stations, as evident from improved correlations and reduced unbiased RMSE after assimilation. Finally, the climatology of soil moisture over the different irrigation fractions reveals that data assimilated outputs over irrigated grid cells tend to have higher soil moisture during dry winter season, demonstrating the ability to capture irrigation signals. These findings quantify the value of data assimilation in improving soil moisture estimates and the ability to capture unmodeled processes such as irrigation, which lays the science groundwork for upcoming space missions such as NASA ISRO Synthetic Aperture Radar (NISAR).

Soil Moisture↗

NASA NTRSDate not supplied

Assimilation of Soil Moisture Observations Over Land Improves Analysis and Prediction of Tropical Cyclone Idai

Soil moisture conditions can impact the circulation and structure of a tropical cyclone (TC) when part or all of the circulation is over land. Dry land surface conditions may lead to faster dissipation of a TC over land, whereas very wet conditions may lead to a prolonged maintenance of its intensity. While this relationship is relatively well understood in theory, applications of these findings in the context of numerical weather prediction (NWP) have been limited. Here we present a case study that explores the potential of improving TC predictions through an improved soil moisture initialization in an NWP framework. Specifically, we examine the impact of assimilating observations from the NASA Soil Moisture Active Passive (SMAP) mission into the NASA Goddard Earth Observing System (GEOS) global weather model on the prediction of South-West Indian Ocean TC Idai (2019). SMAP provides accurate L-band (1.4 GHz) brightness temperatures (Tb) observations that are sensitive to soil moisture globally and at high revisit times of 2-3 days. It has previously been shown that the assimilation of SMAP Tbs significantly improves modeled land surface states. Here we evaluate: (i) forecasts initialized from an analysis that is comparable to the GEOS operational analysis (without SMAP Tb assimilation) and (ii) forecasts initialized from an analysis that additionally assimilates SMAP Tb observations. We find that in the analysis with SMAP assimilation, the TC has a better-defined, more aligned vertical structure over land relative to the control run; moreover, the analyzed TC size, as measured by the wind speed radius, better matches the observed TC size. We further find significant reductions in the forecast intensity error and the forecast along-track error, measured against observations. The largest error reductions occur at lead times of 36 to 72 hours, suggesting that the land with its longer memory gains in importance as a source of predictability at this timescale. An investigation of the underlying mechanisms leading to the skill improvements from SMAP data assimilation revealed that the assimilation of SMAP leads to wetter soil moisture conditions and an increased latent heat flux in the SMAP analysis, which results in a TC with higher column-integrated total moisture content and total energy compared to the control analysis.

Jana Kolassa↗

DOE OSTI2021

Atomic Layer Deposition for Improved Biomass Conversion Catalysts

Heterogeneous catalysts are a key enabler of the transition towards a sustainable, bio-based economy for fuels and chemicals. However, the harsh conditions in many biomass conversion processes lead to nanoparticle sintering, support collapse, and metal leaching in conventional PGM catalysts. Next-generation catalysts must be developed to address these stability challenges. This presentation will discuss ongoing work between the Catalytic Carbon Transformation and Scale-Up Center at NREL and various industrial partners to develop scalable and cost-effective atomic layer deposition (ALD) coatings for improving the performance of biomass conversion catalysts. The substantial focus will be devoted to the benefits of TiO2 ALD coatings on supported Pd hydrogenation catalysts. Ten cycles of TiO2 ALD were found to dramatically improve the activity of a conventional Pd/Al2O3 catalyst towards aromatic hydrogenation, despite partial coverage of the Pd sites by the ALD layer. Subsequent advanced characterization and atomic-scale computational modeling revealed that the ALD coating weakened the adsorption strength of hydrogenation surface intermediates, leading to higher reaction rates. Reaction testing after exposure to sulfur impurities, high temperature oxidation, and hydrothermal treatment demonstrated the improved stability of the ALD-coated catalyst. Additionally, the ALD synthesis process was found to be scalable over two orders of magnitude with minimal deviation in synthesized catalyst properties. These results were contextualized with cost models of industrial ALD coating and aromatic hydrogenation processes to further refine the value proposition of ALD coatings. Given the demonstrated improvements in hydrogenation, TiO2 ALD coatings have also been applied to supported Pt catalysts for use in other biomass conversion reactions, such as hydrodeoxygenation for the production of sustainable aviation fuel (SAF) and the oxidation of glucose to bio-derived gluconic acid.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2021

Atomic Layer Deposition for Improved Biomass Conversion Catalysts

Heterogeneous catalysts are a key enabler of the transition towards a sustainable, bio-based economy for fuels and chemicals. However, the harsh conditions in many biomass conversion processes lead to nanoparticle sintering, support collapse, and metal leaching in conventional PGM catalysts. Next-generation catalysts must be developed to address these stability challenges. This presentation will discuss ongoing work between the Catalytic Carbon Transformation & Scale-Up Center at NREL and various industrial partners to develop scalable, cost-effective atomic layer deposition (ALD) coatings for improving the performance of biomass conversion catalysts. Substantial focus will be devoted to the benefits of TiO2 ALD coatings on supported Pd hydrogenation catalysts. Ten cycles of TiO2 ALD were found to dramatically improve the activity of a conventional Pd/Al2O3 catalyst towards aromatic hydrogenation, despite partial coverage of the Pd sites by the ALD layer. Subsequent advanced characterization and atomic-scale computational modeling revealed that the ALD coating influenced the adsorption strength of hydrogenation surface intermediates in unexpected ways, leading to higher reaction rates. Reaction testing after exposure to sulfur impurities, high temperature oxidation, and hydrothermal treatment demonstrated the improved stability of the ALD-coated catalyst. Additionally, the ALD synthesis process was found to be scalable over two orders of magnitude with minimal deviation in synthesized catalyst properties. These results were contextualized with cost models of industrial ALD coating and aromatic hydrogenation processes to further refine the value proposition of ALD coatings. Given the demonstrated improvements in hydrogenation, TiO2 ALD coatings have also been applied to supported Pt catalysts for use in other biomass conversion reactions, such as hydrodeoxygenation for production of sustainable aviation fuel (SAF) and the oxidation of glucose for bio-derived gluconic acid. Recent findings from these experimental campaigns will also be shared. ALD technology holds great potential in the development of next-generation catalysts for biofuels and bioproducts and this work constitutes an important examination of the impact of ALD coatings in a variety of reaction environments.

bioenergy↗

DOE OSTI2021

Atomic Layer Deposition for Improved Biomass Conversion Catalysts

Heterogeneous catalysts are a key enabler of the transition towards a sustainable, bio-based economy for fuels and chemicals. However, the harsh conditions in many biomass conversion processes lead to nanoparticle sintering, support collapse, and metal leaching in conventional PGM catalysts. Next-generation catalysts must be developed to address these stability challenges. This presentation will discuss ongoing work between the Catalytic Carbon Transformation and Scale-Up Center at NREL and various industrial partners to develop scalable and cost-effective atomic layer deposition (ALD) coatings for improving the performance of biomass conversion catalysts. The substantial focus will be devoted to the benefits of TiO2 ALD coatings on supported Pd hydrogenation catalysts. Ten cycles of TiO2 ALD were found to dramatically improve the activity of a conventional Pd/Al2O3 catalyst towards aromatic hydrogenation, despite partial coverage of the Pd sites by the ALD layer. Subsequent advanced characterization and atomic-scale computational modeling revealed that the ALD coating weakened the adsorption strength of hydrogenation surface intermediates, leading to higher reaction rates. Reaction testing after exposure to sulfur impurities, high temperature oxidation, and hydrothermal treatment demonstrated the improved stability of the ALD-coated catalyst. Additionally, the ALD synthesis process was found to be scalable over two orders of magnitude with minimal deviation in synthesized catalyst properties. These results were contextualized with cost models of industrial ALD coating and aromatic hydrogenation processes to further refine the value proposition of ALD coatings. Given the demonstrated improvements in hydrogenation, TiO2 ALD coatings have also been applied to supported Pt catalysts for use in other biomass conversion reactions, such as hydrodeoxygenation for the production of sustainable aviation fuel (SAF) and the oxidation of glucose to bio-derived gluconic acid. Recent findings from these experimental campaigns will also be shared. ALD technology holds great potential in the development of next-generation catalysts for biofuels and bioproducts, and this work constitutes an important examination of the impact of ALD coatings in a variety of reaction environments.

atomic layer deposition↗