Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “energetic particles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Single neutron transfer on 23 Ne and its relevance for the pathway of nucleosynthesis in astrophysical X-ray bursts

We present new experimental measurements of resonance strengths in the astrophysical 23 Al($p, γ$) 24 Si reaction, constraining the pathway of nucleosynthesis beyond 22 Mg in X-ray burster scenarios. Specifically, we have performed the first measurement of the ($d, p$) reaction using a radioactive beam of 23 Ne to explore levels in 24 Ne, the mirror analog of 24 Si. Four strong single-particle states were observed and corresponding neutron spectroscopic factors were extracted with a precision of ~20%. Using these spectroscopic factors, together with mirror state identifications, we have reduced uncertainties in the strength of the key ℓ = 0 resonance at $E_r$ = 157 keV, in the astrophysical 23 Al($p, γ$) reaction, by a factor of 4. Our results show that the 22 Mg($p, γ$) 23 Al($p, γ$) pathway dominates over the competing 22 Mg($α, γ$) reaction in all but the most energetic X-ray burster events (T > 0.85 GK), significantly affecting energy production and the preservation of hydrogen fuel.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

The Remarkable I 2 O 3 Molecule: A New View from Theory

Atmospheric iodine chemistry has garnered increasing attention as a result of increased iodine emissions. A key subset of this chemistry involves iodine oxides (I 2 O 2–5 ), which serve as precursors to particle formation. Among these, I 2 O 3 is the simplest iodine oxide involved in particle formation, but it has remained undetected in the atmosphere. Previous theoretical studies have characterized this peculiar molecule, primarily using energies to refine geometries obtained at low levels of theory. Due to the reemerging interest in I 2 O 3 , this study presents geometries optimized at the CCSD(T)/aug-cc-pwCVTZ-PP level of theory─marking the first instance, to the best of our knowledge, where this system has been studied exclusively with CCSD(T). Harmonic vibrational frequencies were computed at the same level of theory. Final energetics were obtained using the very high level CCSDT(Q) method with basis sets up to quintuple-zeta cardinality (aug-cc-pwCV5Z-PP) and extrapolated to the CBS limit to yield CCSDT(Q)/CBS//CCSD(T)/aug-cc-pwCVTZ-PP energies. These energies include harmonic zero-point vibrational energy corrections and scalar relativistic energy corrections. Additionally, this study discovers new isomers along the I 2 O 3 potential energy surface, a novel contribution to the field. The performance of different computational methods and DFT functionals commonly used in atmospheric chemistry is also assessed relative to high-level theoretical methods.

basis sets↗
DOE OSTI2024

Redox dynamics and surface structures of an active palladium catalyst during methane oxidation

Catalysts based on palladium are among the most effective in the complete oxidation of methane. Despite extensive studies and notable advances, the nature of their catalytically active species and conceivable structural dynamics remains only partially understood. Here, we combine operando transmission electron microscopy (TEM) with near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) and density functional theory (DFT) calculations to investigate the active state and catalytic function of Pd nanoparticles (NPs) under methane oxidation conditions. We show that the particle size, phase composition and dynamics respond appreciably to changes in the gas-phase chemical potential. In combination with mass spectrometry (MS) conducted simultaneously with in situ observations, we uncover that the catalytically active state exhibits phase coexistence and oscillatory phase transitions between Pd and PdO. Aided by DFT calculations, we provide a rationale for the observed redox dynamics and demonstrate that the emergence of catalytic activity is related to the dynamic interplay between coexisting phases, with the resulting strained PdO having more favorable energetics for methane oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

HIGH BURNUP FUEL-COOLANT INTERACTION ANALYSIS SUPPORTING FUEL SAFETY TESTING AT IDAHO NATIONAL LABORATORY

In the near future, experiments on HBu fuel under loss-of-coolant accident (LOCA) and reactivity-initiated accident (RIA) conditions will be performed within the Transient Reactor Test Facility (TREAT) at Idaho National Laboratory (INL). These experiments will be performed using the Transient Water Irradiation System for TREAT (TWIST) experiment vehicle. To support these experiments, analysis of fuel-coolant interaction (FCI) energetics is underway. This paper discusses FCIs in the context of light water reactor (LWR) safety, differentiating between the severe accident focus of commercial reactors and experimental RIA test programs where FCIs have occurred. However, it is highlighted that as the nuclear industry aims for increased burnup limits, the FCI events observed in RIA test programs may become relevant to commercial LWR safety analysis. The paper then presents developments to the UW-FCI computer program to enable simulation of FCIs initiated by solid fuel particles dispersing into the coolant during RIAs.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Particulate mass migration and mixing in cylindrically contained explosions

Abstract To explore particulate movement near the plasma of chemical explosions, rugged tracer particles were placed within and on the exterior of metal charges and electrically detonated. The particles were collected on/in the porous walls of plastic cylinders at diameters that correlated to the plasma width during different phases of the explosion. The particles’ positions were determined by Boolean logic analysis of their luminescent intensity. The cylinders which caught particles from the initial phases of the explosion retained placement information, while wider cylinders showed uniform mixing. These results/analysis methodology can help improve the understanding of particulate mixing in harsh environments. Graphical abstract

36 MATERIALS SCIENCE↗
DOE OSTI2025

Impact of amorphous pockets on displacement damage evolution in silicon

Silicon has long been known to exhibit amorphization in response to heavy particle bombardment. For doses below the total amorphization threshold, partial amorphization is observed in the form of scattered amorphous pockets. While extensive research has gone into modeling the formation and evolution of amorphous pockets in response to irradiation, no studies yet investigate their impact on the evolution of other damage such as interstitial supersaturation and clustering. In this study, we survey the impact of amorphous pockets on defect evolution in silicon when treated as static sinks. MD is first used to show that amorphous pockets provide energetically favorable sites for point defects relative to the crystalline bulk, supporting the hypothesis that they act as sinks. A 0-D cluster dynamics model is then constructed, taking an interstitial clustering model from the literature and including amorphous pockets as a sink species. We conduct our survey for temperatures between 30 and 400 °C and sink strengths between 1 to 6 x 10 10 cm −2 . Both implantation- and radiation-induced damage states are investigated using interstitial and vacancy concentrations as initial condition variables. We find that, due to the differing migration rates of the interstitial and the vacancy, amorphous pockets have a non-monotonic impact on the final damage state depending on the effective sink strength of the amorphous pockets, resulting in increased damage formation in regimes of intermediate amorphization. In conclusion, this result emphasizes the important role of amorphous pockets in governing the evolution of damage in partially amorphized crystalline materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Meson Spectroscopy at CLAS and CLAS12: an overview of selected results

Hadron spectroscopy is a valuable tool to experimentally investigate the low-energy, non-perturbative QCD regime, corresponding to the dominant manifestation of the strong force in Nature, in terms of hadrons that constitute the bulk of the visible mass of the Universe. In particular, the measurement of the mesons spectrum, searching for exotic states not compatible with the Quark Model, would provide access to the gluonic degrees of freedom that bind particles together. A broad program to study meson spectroscopy in the light quark sector started at Jefferson Laboratory during the previous 6-GeV period. The CLAS experiment in Hall B used a Bremmstrahlung tagged photon beam impinging on a proton target to provide the first measurement of many photoproduction reactions. Currently, in the 12-GeV era, the MesonEx experiment continues this physics effort, exploiting the larger beam energy and intensity. MesonEx employs low-Q2 electron scattering as a technique to produce an intense and highly energetic quasi-real photon beam. In the experiment, the low-angle scattered electron is measured in a dedicated detector, the Forward Tagger, in coincidence with final state hadrons measured in the CLAS12 spectrometer. In this talk, after discussing some selected results from the CLAS program, I'll present the ongoing MesonEx experiment, showing some preliminary results.

Celentano, Andrea↗
DOE OSTI2025

Fusion and fission of particle-like chiral nematic vortex knots

Vortex knots have been seen decaying in many physical systems. Here we describe topologically protected vortex knots, which remain stable and undergo fusion and fission and conserve a topological invariant. The host medium, a chiral nematic liquid crystal, exhibits intrinsic chirality of molecular alignment, whereas cores of the vortex lines are structurally achiral regions in which a molecular twist cannot be defined. We can reversibly switch between fusion and fission of these vortex knots by applying electric pulses. This reveals the physical embodiments of concepts in knot theory, such as connected sums of knots and band surgeries. Our findings demonstrate the interplay of chirality effects at hierarchical levels from constituent molecules to the host medium and the energetically stable chiral vortex knots. This emergent physical behaviour may enable applications in electro-optics and photonics in which such fusion and fission processes of vortex knots can be used for controlling light.

Applied mathematics↗
DOE OSTI2025

Quarkyonic or baryquark matter

Here, it has been proposed that at high densities nuclear matter will consist of a Fermi sea of quarks surrounded by a small shell of confined baryon at the large momenta, so called Quarkyonic matter. In this contribution we will discuss an alternative configuration, dubbed Baryquark matter, which in a sense is a complement of Quarkyonic matter. Baryquark matter consists of a Fermi sea of confined baryons surrounded by a shell of deconfined quarks. Following Koch and Vovchenko (2023) we will show that for certain (simplified) implementations Baryquark matter is energetically favored over Quarkyonic matter. We will then briefly discuss how the inclusion of the quark structure of nucleons will lead to a configuration which resembles the picture of Quarkyonic matter.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

The Impact of the 8–10 March 2012 Geomagnetic Storm on Inner Zone Protons as Measured by Van Allen Probes

The Relativistic Electron Proton Telescope (REPT) instrument on the Van Allen Probes observed a double-peaked inner zone proton population throughout the 7 year lifetime of the mission. M. Hudson et al. (2023) showed that a strong SEP event accompanied by a CME-shock in early March 2012 provided the Solar Energetic Proton (SEP) source for the higher L trapped proton population, which then diffused radially inward to be observed by REPT at L = 2. The study followed trajectories of SEP protons launched isotropically from a sphere at 7 Re for 2.5 hr in fields calculated by the LFM-RCM global MHD model, which includes electric fields needed to model the transport and trapping of the protons by the shock, and then a radial diffusion simulation was run for 2 years using the result from the test-particle simulation as the initial condition. The simulation result was compared with REPT measurement in November 2013 and showed reasonable agreement. However, the simulation overestimated the Phase Space Density by a factor of four due to lack of field line curvature scattering during the storm in the model. In this study, a test-particle simulation is performed for 2 days following the injection and trapping of protons in March 2012 using TS05 fields to simulate the field line curvature scattering of the trapped SEP due to the buildup of the ring current during the geomagnetic storm. The resulting sample distribution was then weighted using the flux at the end of the two-hour MHD-test particle simulation. A radial diffusion simulation is then run using the initial profile that included the loss effect, with improved comparison with REPT measurements after 2 years.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Simulations of stand-off runaway electron beam termination by tungsten particulates for tokamak disruption mitigation

Abstract Stand-off runaway electron termination by injected tungsten particulates offers a plausible option in the toolbox of disruption mitigation. Tungsten is an attractive material choice for this application due to large electron stopping power and high melting point. To assess the feasibility of this scheme, we simulate runaway collisions with tungsten particulates using the MCNP program for incident runaway energies ranging from 1 to 10 MeV. We assess runaway termination from energetics and collisional kinematics perspectives. Energetically, the simulations show that 99% of runaway beam energy is removed by tungsten particulates on a timescale of 4–9 µ s. Kinematically, the simulations show that 99% of runaways are terminated by absorption or backscattering on a timescale of 3–4 µ s. By either metric, the runaway beam is effectively terminated before the onset of particulate melting. Furthermore, the simulations show that secondary radiation emission by tungsten particulates does not significantly impact the runaway termination efficacy of this scheme. Secondary radiation is emitted at lower particle energies than the incident runaways and with a broad angular distribution such that the majority of secondary electrons emitted will not experience efficient runaway re-acceleration. Overall, the stand-off runaway termination scheme is a promising concept as a last line of defense against runaway damage in ITER, SPARC, and other future burning-plasma tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Status of the Mu2e experiment at Fermilab

The Mu2e experiment aims to improve, by four orders of magnitude, current sensitivity in the search for the charged-lepton flavor violating (cLFV) neutrino-less conversion of a negative muon into an electron. The conversion process will be identified by a distinctive signature of a mono-energetic electron with energy slightly below the muon rest mass. In the Standard Model this process has a negligible rate. However, in many Beyond the Standard Model scenarios its rate is within the reach of Mu2e sensitivity. In this paper, we explain the Mu2e design guidelines and summarize the status of the experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Axion-mediated Transport of Fast Radio Bursts Originating in Inner Magnetospheres of Magnetars

Abstract Among magnetar models of fast radio bursts (FRBs), there is ongoing debate about whether the site of coherent radio emission lies within or beyond the light cylinder. We propose a mechanism by which FRBs produced near the magnetar surface are transported out of the magnetosphere by axions, which are hypothetical particles that couple to photons. If the emission site hosts strong accelerating electric fields, a considerable fraction of the FRB energy budget is converted to an axion burst. Once produced, the axion burst free streams out of the magnetosphere due to the rapidly decreasing magnetic field. The burst may escape through either the open or closed magnetosphere while retaining the temporal signature of the original FRB. In the wind region, axions resonantly excite ordinary (O) modes that escape as the plasma density decreases. The radio efficiency of this mechanism satisfies energetics constraints from FRB 121102 for axion−photon coupling strengths that have not been excluded by other astrophysical probes.

Prabhu, Anirudh (ORCID:0000000191157844)↗
DOE OSTI2024

Precision spectroscopy of fast, hot, exotic isotopes using machine-learning-assisted event-by-event Doppler correction

We propose an experimental scheme for performing sensitive, high-precision laser spectroscopy studies on fast exotic isotopes. By inducing a stepwise resonant ionization of the atoms traveling inside an electric field and subsequently detecting the ion and the corresponding electron, time-, and position-sensitive measurements of the resulting particles can be performed. Using a mixture density network, we can leverage this information to predict the initial energy of individual atoms and thus apply a Doppler correction of the observed transition frequencies on an event-by-event basis. We conduct numerical simulations of the proposed experimental scheme and show that kHz-level uncertainties can be achieved for ion beams produced at extreme temperatures ( > 10 8 K), with energy spreads as large as 10 keV and nonuniform velocity distributions. The ability to perform in-flight spectroscopy, directly on highly energetic beams, offers unique opportunities to study short-lived isotopes with lifetimes in the millisecond range and below, produced in low quantities, in hot and highly contaminated environments, without the need for cooling techniques. Such species are of marked interest for nuclear structure, astrophysics, and new physics searches. Published by the American Physical Society 2024

Udrescu, S. M. (ORCID:000000021989576X)↗
DOE OSTI2025

Experimental progress and future plans on spherical tokamak, QUEST

QUEST (Q-shu university experiment with steady state spherical tokamak) aims at effective plasma current start-up and stable maintenance of plasma discharge. To solve the inherent problems in a spherical tokamak (ST) arising from insufficient space for placing the inductive center solenoid, electron cyclotron current drive (ECCD) and transient coaxial helicity injection (T-CHI) are implemented as a non-inductive plasma start-up method in QUEST. Efficient ECCD assisted by energetic electrons could be achieved. By combining control of the wave injection angle and application of a negative toroidal electric field, the bulk electron temperature could be raised up to 1 keV due to selective wave power absorption in the bulk electrons. The plasma current of over 50 kA contained within the closed flux surface could be obtained with a floating single biased electrode placed on lower divertor plates for T-CHI. Long-pulse operations on QUEST are impeded frequently due to wall saturation and subsequent density runaway caused by fuel particle imbalance. Since 2014, a unique tool called the ‘hot wall’ has been implemented to overcome the imbalance. The hot wall has a capability to regulate its surface temperature using a heater and two water cooling channels. With the help of the hot wall, 6 h discharges were obtained in 2020. Cooling down of the surface of the hot wall was significantly effective in recovering the wall pumping and was useful to extend the pulse duration. Augmentation of the toroidal magnetic field, B T up to 0.5 T from 0.25 T and a continuous wave (CW) gyrotron of 28 GHz are planned for QUEST in the near future. As raising B T provides a fundamental resonance of electron cyclotron waves (ECWs) with 28 GHz, more effective plasma current start-up and heating will be performed. Long-pulse operations with higher plasma parameters are expected.

QUEST↗
DOE OSTI2026

Electrostatic Superlattices Beyond 1:1 Stoichiometry

ABSTRACT Exotic nanoparticle superstructures can be accessed by harnessing nanoparticle softness and charge regulation, features often viewed as obstacles to structural control. Here, we show that regulated charge mismatch in polymer‐grafted nanoparticles enables the assembly of high‐stoichiometry cubic superlattices. By co‐tuning grafting density, particle size, and bulk composition, we realize ionic‐lattice analogues, such as and , as well as single‐component and superlattices without atomic counterparts. The superlattice has recently been identified theoretically as a photonic band‐gap lattice. These phases emerge from a 1:1 “parent” lattice when local charge neutrality cannot be satisfied, driving either progressive interstitial filling or reorganization into a larger basis. For instance, the systematic occupation of ZnS tetrahedral sites yields , while ligand‐swapping symmetry breaking converts CsCl into . Upon heating, the assemblies exhibit reversible lattice contraction and pronounced negative thermal expansion. Furthermore, the energetic penalty for defects increases with nanoparticle size, facilitating the scalable production of high‐quality, open superlattices for photonic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Extrusion‐Spheronization of Mock Energetic Materials

The primary method for producing plastic bonded explosive (PBX) granules, or “prills”, has remained relatively unchanged for 70 years despite the complex nature of the process. In this work, we demonstrate the feasibility of using an extrusion‐spheronization technique to produce prills for PBX applications. We begin by detailing an inert formulation with similar properties of PBXs and then demonstrate the extrusion‐spheronization processing of these materials. A study is then performed where the spheronization process time of the extruded materials is varied and the resultant prills are morphologically characterized. Further, these prills are then pressed into high‐density articles and subject to compression testing to elucidate trends in process, properties, and performance. It was found that, for our formulation (95 wt.% melamine/5 wt.% polymer binder) and process, a spheronization time of 60 s yielded relatively uniform particles that exhibited improved poured, tapped, and pressed densities. Mechanical strength did not have a strong trend with process time as all spheronized materials had similar peak compression stress at failure. After further optimization, extrusion‐spheronization may be a promising path for future PBX formulation.

extrusion spheronization↗