Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ATOMIC DISPLACEMENTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Insights into radiation resistance of titanium alloys from displacement cascade simulations

Radiation damage in beam window materials limits the use of high power proton beams in high energy physics research. The alloy Ti-6Al-4V is presently used as a beam window material but a prospective alternative, Ti-15V-3Cr-3Sn-3Al has been proposed. Since both these alloys contain dual phases at room temperature, we compare the radiation damage in the α and ß-phases of these two materials via primary knock-on atom (PKA) cascade simulations in the 10-40keV energy range. At PKA energies 30 and 40keV, the number of Frenkel pairs in the ballistic stage is higher in the ß-phase of Ti-6Al-4V than that in the ß-phase of Ti-15V-3Cr-3Sn-3Al almost by a factor of 2. The α-phase, of both these alloys, by far outperforms the ß-phases of the two alloys, both in terms of damage during the ballistic stage and in terms of the surviving defects. The average displacement threshold energy (E d ) in the α-phase of both alloys was found to be 66eV while that in the ß-phase of Ti-15-3 was 55 eV and in the ß-phase of Ti-6-4 was 46. Further, while the number of surviving defects is almost equal in both alloys, the vacancy and interstitial clustering mechanisms differ notably, which can impact the degree of radiation hardening and loss of ductility. Our simulations show larger vacancy and interstitial clusters form in Ti-6Al-4V as compared to that in Ti-15-3-3-3 alloy. These results indicate that Ti-15-3-3-3 alloys may be a promising candidate for next generation beam window material with a higher radiation tolerance than the existing Ti-6-4 alloy.

36 MATERIALS SCIENCE↗
NASA NTRS2002

Simulations of Ground and Space-Based Oxygen Atom Experiments

Fast, pulsed atomic oxygen sources are a key tool in ground-based investigations of spacecraft contamination and surface erosion effects. These technically challenging ground-based studies provide a before and after picture of materials under low-earth-orbit (LEO) conditions. It would be of great interest to track in real time the pulsed flux from the source to the surface sample target and beyond in order to characterize the population of atoms and molecules that actually impact the surface and those that make it downstream to any coincident detectors. We have performed simulations in order to provide such detailed descriptions of these ground-based measurements and to provide an assessment of their correspondence to the actual LEO environment. Where possible we also make comparisons to measured fluxes and erosion yields. To perform the calculations we use a detailed description of a measurement beam and surface geometry based on the W, pulsed apparatus at Montana State University. In this system, a short pulse (on the order of 10 microseconds) of an O/O2 beam impacts a flat sample about 40 cm downstream and slightly displaced &om the beam s central axis. Past this target, at the end of the beam axis is a quadrupole mass spectrometer that measures the relative in situ flux of 0102 to give an overall normalized erosion yield. In our simulations we use the Direct Simulation Monte Carlo (DSMC) method, and track individual atoms within the atomic oxygen pulse. DSMC techniques are typically used to model rarefied (few collision) gas-flows which occur at altitudes above approximately 110 kilometers. These techniques are well suited for the conditions here, and multi-collision effects that can only be treated by this or a similar technique are included. This simulation includes collisions with the surface and among gas atoms that have scattered from the surface. The simulation also includes descriptions of the velocity spread and spatial profiles of the O/O2 beam obtained from separate measurements. These computations use basic engineering models for the gas-gas and gas-surface scattering and focus on the influence of multi-collision effects. These simulations characterize many important quantities of interest including the actual flux of atoms that reach the surface, the energy distribution of this flux, as well as the direction of the velocity of the flux that strikes the surface. These quantities are important in characterizing the conditions which give rise to measured surface erosion. The calculations also yield time- snapshots of the pulse as it impacts and flows around the surface. These snapshots reveal the local environment of gas near the surface for the duration of the pulse. We are also able to compute the flux of molecules that travel downstream and reach the spectrometer, and we characterize their velocity distribution. The number of atoms that reach the spectrometer can in fact be influenced by the presence of the surface due to gas-gas collisions from atoms scattered h m the surface, and it will generally be less than that with the surface absent. This amounts to an overall normalization factor in computing erosion yields. We discuss these quantities and their relationship to the gas-surf$ce interaction parameters. We have also performed similar calculations corresponding to conditions (number densities, temperatures, and velocities) of low-earth orbit. The steady-state nature and lower overall flux of the actual space environment give rise to differences in the nature of the gas-impacts on the surface from those of the ground-based measurements using a pulsed source.

Minton, T. K.↗
NASA NTRS1992

Radial vibrations of a sodium ion inside icosahedral C60

The very high symmetry of icosahedral C60 suggests that, as a first approximation, an atom trapped inside C60 would be subject to a potential that is radially symmetric about the center. All-electron local-density-functional calculations of the total energy of a sodium ion as a function of radial displacement from the center along the fivefold axis of C60 serve to refine such a radial potential. In particular, the calculations suggest studying potentials that have minima displaced from the center. An analytic functional form for a radial potential having a positive cusp at the origin is proposed, and the s-wave radial solutions of the corresponding Schroedinger equation are examined.

Ballester, J. L.↗
NASA NTRS1978

Modified lattice-statics approach to dislocation calculations. II - Application

The atomic structure of a screw dislocation core of the 110 line type in aluminum is calculated by the modified lattice-statics method developed in the preceding paper. The method includes anharmonic as well as harmonic forces and permits relaxation of the atoms in all three dimensions. All forces used in the present calculations were derived from a first-principles interatomic pair potential obtained via pseudopotential theory. Several significant differences from the ordinary lattice statics results are noted, including the displacement field, Peierl's energy barrier, and the equilibrium core-center location.

Esterling, D. M.↗
DOE OSTI2022

Combined Rotating Disk Slurry Electrodeposition–Spontaneous Galvanic Displacement for Pt-M (M = Co, Ni, and Cu) Catalyst Synthesis for the Oxygen Reduction Reaction in Alkaline Media

Here, platinum-modified first-row transition-metal catalyst (M = Ni, Co, and Cu) nanoparticles on a carbon black Vulcan XC-72R (CBV) support were synthesized using rotating disk slurry electrodeposition (RoDSE) followed by spontaneous galvanic displacement (SGD) reactions. These RoDSE–SGD catalysts were evaluated for the oxygen reduction reaction (ORR) in 0.1 M KOH using rotating disk electrode techniques. The Ni and Co RoDSEs were done by using an electrochemical applied potential of -0.75 V versus the RHE and for Cu, -0.80 V versus the RHE using a CBV slurry solution containing 0.1 M KClO 4 . These metal nanoparticles on CBV (M/CBV) catalysts were modified with a Pt precursor via a spontaneous galvanic displacement (SGD) reaction, producing a Pt-M/CBV material to catalyze the ORR in an alkaline medium. High-resolution scanning transmission electron microscopy (HR-STEM) analysis indicates that the PtM/CBV samples include M clusters and Pt single atoms. The ORR characterization measurements were done under a controlled temperature (25.0 °C) and with a mass loading of 100 μg/cm 2 on a glassy carbon (GC) rotating disk electrode at 1600 rpm. The PtCo/CBV showed the highest ORR mass activity of 0.741 A/mgPt at 0.90 V versus the reversible hydrogen electrode (RHE) compared with commercial Pt/CBV. The M/CBV RoDSE catalysts were also tested for the oxygen evolution reaction (OER), and Ni/CBV provided the lowest overpotential of 450 mV at 10 mA/cm 2 disk in 0.1 M KOH.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Truncated nonlinear interferometer-based atomic force microscopes

A truncated non-linear interferometer-based atomic force microscope (AFM) includes an input port and a non-linear amplifier that renders a probe beam and a conjugate beam. The AFM includes local oscillators having a relationship with the probe beam and the conjugate beam. The displacement of the AFM's cantilever is transduced by the probe beam, and/or the conjugate beam or their respective local oscillators. The AFM's phase-sensitive detectors detect a phase modulation between the respective local oscillators and the probe beam and the conjugate beam. The detected phase modulation corresponds to the change in phase. The AFM's circuitry measures phase signals that are indicative of the cantilever displacement. The resulting measurement signals exhibit a quantum noise reduction in either the intensity difference or phase sum quadrature.

Pooser, Raphael C.↗
DOE OSTI2026

Comparison of DeePMD, MTP, GAP, ACE and MACE Machine‐Learned Potentials for Radiation‐Damage Simulations: A User Perspective

Accurate and efficient interatomic potentials are essential for molecular dynamics (MD) simulations of radiation damage, gas diffusion, and phase stability in complex ceramics such as LiAlO 2 , especially under extreme conditions relevant to tritium production. Here, we evaluate the performance of six machine-learned interatomic potentials (MLIPs), moment tensor potential (MTP), Gaussian approximation potential, deep potential (DeePMD), atomic cluster expansion (ACE), message-passing ACE (multilayer atomic cluster expansion (MACE) pretrained) and MACE (trained from-scratch), all trained on the same density functional theory dataset with inclusion of tritium. The MLIPs are benchmarked against traditional Buckingham and ReaxFF potentials in terms of energy accuracy, density predictions, thermal equilibration behavior, threshold displacement energy (E d ), tritium diffusivity, and computational cost. Among the models, MTP shows the best overall balance between efficiency and accuracy, with low force and energy errors and realistic E d values for Li and Al. The ACE and MACE (pretrained and trained from scratch) models exhibit high E d (>200 eV) and unphysical pair interactions. DeePMD underestimates Ed due to overly repulsive behavior even at equilibrium distances. All models over-estimate tritium diffusion but the pretrained MACE model behaves well during tritium-diffusion simulations up to 500 K, maintaining diffusivities in the physically consistent 10 −11 m 2 /s range. Finally, we quantify the computational cost of each potential in large-scale atomic/molecular massively parallel simulator, finding that only MTP is more efficient than traditional empirical potentials, while others are significantly more expensive. These findings explain the trade-offs between accuracy and computational cost in MLIP development and provide essential guidance for use in high-throughput radiation damage and gas diffusion simulations in nuclear ceramics.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1985

Modeling of dense sprays from LOX/H2 coaxial injectors under supercritical conditions

Assumptions commonly employed in the analytical description of a thin spray become unacceptable as the droplet density and droplet volume displacement become large. Changes in the semiempirical models describing drop-drop or drop-gas interactions as well as in the basic modeling approach itself may be necessary. A number of efforts undertaken to improve such models of the atomization-evaporation process to render them applicable in the dense-spray, supercritical regime are described. The improvements include those for variable drop density, supercritical properties, stripping evaporation and drop reincorporation into the liquid stream. The models are developed for use with the ARICC three-phase finite difference combustion code. Selected results from a sample calculation are presented, demonstrating the enhanced realism achievable with the upgraded models.

Liang, P. Y.↗
DOE OSTI2022

Photoinduced evolution of lattice orthorhombicity and conceivably enhanced ferromagnetism in LaMnO 3 membranes

Ultrashort laser pulses have been utilized to dynamically drive phase transitions in correlated quantum materials. Of particular interest is whether phases not achievable in thermal equilibrium can be induced in complex oxides with intricately coupled lattice, electron and spin degrees of freedom. Here, we tracked atomic motions in LaMnO 3 following photoexcitation with MeV ultrafast electron diffraction (MeV-UED) technique. We found that the light excited state exhibits numerous signatures different from thermal equilibrium ones, including nearly conserved Bragg intensities, strongly suppressed La cation and oxygen anion displacements, and the long-range lattice orthorhombicity evolution. Furthermore, using first-principles calculations, we predict that the ferromagnetic ordering and conductivity are both enhanced upon laser excitation due to the reduction of the lattice orthorhombicity. This work benefits from recent advance in fabrication of membrane films with high epitaxial quality and in MeV-UED with large momentum space access and high temporal resolution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Failure modes of protection layers produced by atomic layer deposition of amorphous TiO 2 on GaAs anodes

Amorphous titanium dioxide (a-TiO 2 ) films formed by atomic layer deposition can serve as protective coatings for semiconducting photoanodes in water-splitting cells using strongly alkaline aqueous electrolytes. Herein, we experimentally examine the mechanisms of failure for p + -GaAs anodes coated with a-TiO 2 films (GaAs/a-TiO 2 ). Galvanic displacement of exposed GaAs by Au allowed imaging of pinholes in the a-TiO 2 coatings, and enabled collection of quantitative and statistical data associated with pinhole defects. A combination of imaging, electrochemical measurements, and quantitative analyses of corrosion products indicated that extrinsic pinholes were present in the a-TiO 2 films before electrochemical operation. During electrochemical operation these pinholes led to pitting corrosion of the underlying GaAs substrate. The dominant source of pinholes was the presence of atmospheric particulate matter on the GaAs surface during deposition of the a-TiO 2 layer. The pinhole density decreased substantially when the thickness of the a-TiO 2 coating increased beyond 45 nm, and approached zero when the thickness of the film exceeded 112 nm. The density of pinholes in films thinner than 45 nm decreased when the a-TiO 2 coating was deposited in an environmentally controlled cleanroom. Pinhole-free GaAs/a-TiO 2 devices were also tested via chronoamperometry to quantify the rate of pinhole formation during electrochemistry. The time-to-failure increased with thickness, suggesting that the failure mechanism may involve diffusion or migration through the film. However, other mechanisms may also contribute to the degradation of thicker films (>112 nm). Nevertheless, as previously hypothesized, extrinsic pinhole defects formed during deposition and testing control the short-term protective performance of the a-TiO 2 film for GaAs anodes evolving O 2 from water.

25 ENERGY STORAGE↗
DOE OSTI2021

Electric-field-induced crossover of polarization reversal mechanisms in Al 1–x Sc x N ferroelectrics

Scandium-doped aluminum nitride, Al 1–x Sc x N, represents a new class of displacive ferroelectric materials with high polarization and sharp hysteresis along with high-temperature resilience, facile synthesizability and compatibility with standard CMOS fabrication techniques. The fundamental physics behind the transformation of unswitchable piezoelectric AlN into switchable Al–Sc–N ferroelectrics depends upon important atomic properties such as local structure, dopant distributions and the presence of competing mechanism of polarization switching in the presence of an applied electric-field that have not been understood. We computationally synthesize Al 1–x Sc x N to quantify the inhomogeneity of Sc distribution and phase segregation, and characterize its crystal and electronic structure as a function of Sc-doping. Nudged elastic band calculations of the potential energy surface and quantum molecular dynamics simulations of direct electric-field-driven ferroelectric switching reveal a crossover between two polarization reversal mechanisms—inhomogeneous nucleation-and-growth mechanism originating near Sc-rich regions in the limit of low applied fields and nucleation-limited-switching in the high-field regime. Finally, understanding polarization reversal pathways for these two mechanisms as well as the role of local Sc concentration on activation barriers provides design rules to identify other combinations of dopant elements, such as Zr, Mg etc. to synthesize superior AlN-based ferroelectric materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Diffusion of Atoms in Glassy Mixtures of Deuterium and Lithium

The diffusion coefficients of D and Li were calculated in amorphous, glassy Li+D mixtures for various concentrations of D in lithium over the temperature range 100–1000 K. The densities of the mixtures as a function of temperature were also determined. The diffusion coefficients were obtained by the analysis of the mean-squared displacement using molecular dynamics with ReaxFF, a reactive force field. In conclusion, the diffusion and density data obtained for Li+D mixtures were compared with the available experimental and calculated data reported in the literature.

Diffusion↗
DOE OSTI2020

Interference microscopy study of the preplasma formed on an iron target surface exposed to high-power femtosecond laser pulses

The characteristic scale of spread of the plasma formed on the surface of a bulk iron target irradiated by a femtosecond laser pulse with an intensity of 10{sup 16} W cm{sup −2} is measured by time-resolved interference microscopy using femtosecond pulses emitted by a Cr : forsterite laser system with an intensity contrast of 10{sup 7}. The chosen technique is demonstrated to be efficient in such measurements. It is shown experimentally that, as a result of laser pulse impact, the displacement of a plasma layer with a density exceeding critical does not exceed 30 nm. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Nonresonant Raman Control of Ferroelectric Polarization

Important advances is recently made in the search for materials with complex multi-phase landscapes that host photoinduced metastable collective states with exotic functionalities. In almost all cases so far, the desired phases are accessed by exploiting light–matter interactions via the imaginary part of the dielectric function through above-bandgap or resonant mode excitation. Nonresonant Raman excitation of coherent modes is experimentally observed and proposed for dynamic material control, but the resulting atomic excursion is limited to perturbative levels. Here, in this study, this challenge is overcome by employing nonresonant ultrashort pulses with low photon energies well below the bandgap. Using mid-infrared pulses, ferroelectric reversal is induced in lithium niobate, and the large-amplitude mode displacements are characterized through femtosecond stimulated Raman scattering and second harmonic generation. This approach, validated by first-principle calculations, defines a novel method for synthesizing hidden phases with unique functional properties and manipulating complex energy landscapes at reduced energy consumption and ultrafast speeds.

Shi, Jiaojian [Stanford Univ., CA (United States);↗
NASA NTRS1977

Soft diffuse X-rays in the southern galactic hemisphere

A map is presented of the soft X-ray diffuse background flux in the C band (approximately 0.13-0.28 keV) covering almost all of the southern galactic hemisphere. A comparison at constant galactic latitude of both C band and B band (about 0.1-0.18 keV) soft X-ray data with neutral-hydrogen maps shows that the intensity does decrease with increasing neutral-hydrogen column density but in a manner that is inconsistent with photoelectric absorption. It is suggested that the inverse correlation is a displacement effect. X-ray emission regions appear to be where the cool gas is not. Further, the evidence against photoelectric absorption implies that the bulk of the cool gas is beyond the X-ray emitting regions. Fewer than 10 to the 20th power H atoms per sq cm can be between the sun and the X-ray emitting regions. The sun appears to be surrounded by a soft X-ray emission region consisting of gas at a temperature of about 1 million K.

Sanders, W. T.↗
DOE OSTI2024

Enhanced Radiation Damage Tolerance of Amorphous Interphase and Grain Boundary Complexions in Cu-Ta

Amorphous interfacial complexions are particularly resistant to radiation damage and have been primarily studied in alloys with good glass-forming ability, yet recent reports suggest that these features can form even in immiscible alloys such as Cu-Ta under irradiation. In this work, the mechanisms of damage production and annihilation due to primary knock-on atom collisions are investigated for amorphous interphase and grain boundaries in a Cu-Ta alloy using atomistic simulations. Amorphous complexions, in particular amorphous interphase complexions that separate Cu and Ta grains, result in less residual defect damage than their ordered counterparts. Stemming from the nanophase chemical separation in this alloy, the amorphous complexions exhibit a highly heterogeneous distribution of atomic excess volume, as compared to a good glass former like Cu-Zr. Complexion thickness, a tunable structural descriptor, plays a vital role in damage resistance. Thicker interfacial films are more damage-tolerant because they alter the defect production rate due to differences in intrinsic displacement threshold energies during the collision cascade. Overall, the findings of this work highlight the importance of interfacial engineering in enhancing the properties of materials operating in radiation-prone environments and the promise of amorphous complexions as particularly radiation damage-tolerant microstructural features.

36 MATERIALS SCIENCE↗
NASA NTRS1972

Study of the Stark effect in the resonance lines of sodium by an atomic jet method

The reversal of the magnetic moment of a part of the atoms of a consecutive jet with optical excitation and on the return to the fundamental level is applied to the case of sodium, in order to complete previous results dealing with the alkalis. A conventional atomic jet apparatus consisting of two electromagnets with Rabi-type poles which produce magnetic field gradients of the same sense was used. The accuracy of measurement of the Stark effect by excitation of an atomic jet of high collimation is limited by the Doppler width of the lines emitted by the source or, if this width is diminished with the help of a connected process, by the luminous power available. The results make it possible to extend the experiments to the measurement of isotopic displacements of sodium.

Duong, H. T.↗
DOE OSTI2023

Deciphering the Mechanism of Base-Triggered Conversion of Ammonia to Molecular Nitrogen and Methylamine to Cyanide

Here we report an in-depth investigation into the ammonia oxidation mechanism by the catalyst [Ru III (tpy)(dmabpy)NH 3 ] 3 + ([Ru(NH 3 )] 3 + ). Stoichiometric reactions of [Ru(NH 3 )] 3 + were carried out with exogenous noncoordinating bases to trigger a proposed redox disproportionation reaction, which was followed using variable-temperature NMR spectroscopy. An intermediate species was identified as a dinitrogen-bridged complex using 15 N NMR and Raman spectroscopy on isotopically labeled complexes. This intermediate is proposed to derive from coupling of nitridyl species formed upon sequential redox disproportion reactions. Acetonitrile displaces the dinitrogen bridge to yield free N 2 . DFT calculations support this lower-energy pathway versus that previously reported for ammonia oxidation by the parent [Ru III (tpy)(bpy)NH 3 ] 3 + complex. These experimental and computational results are consistent with the interpretation of redox disproportionation involving sequential hydrogen atom transfer reactions by an amide/aminyl intermediate, [Ru(NH 2 ) – ] + $\Leftrightarrow$ [Ru(NH 2 ) • ] + , formed upon deprotonation of the parent complex. Control experiments employing a large excess of ammonia as a base indicate this new proposed lower-energy pathway contributes to the oxidation of ammonia to dinitrogen in conditions relevant to electrocatalysis. In addition, analogous methylamine complexes, [Ru(NH 2 CH 3 )] 2 + /3 + , were prepared to further test the proposed mechanism. Treating [Ru(NH 2 CH 3 )] 3 + with a base cleanly yields two products [Ru(NH 2 CH 3 )] 2 + and [Ru(CN)] + in an ~3:1 ratio, fully consistent with the proposed cascade of hydrogen atom transfer reactions by an intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗