Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “slots”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Wind tunnel tests of a full-scale model of a light twin-engine airplane with fixed auxiliary airfoil or leading-edge slot

An investigation has been conducted by means of wind-tunnel tests of a full-scale mockup of a light twin-engine airplane configuration to determine the effects of outboard partial-span slots and of auxiliary airfoils ahead of the leading edge of the wing in improving aerodynamic characteristics at high angles of attack. Both of the stall-control devices gave considerable improvement in high angle-of-attack characteristics with the auxiliary airfoil giving the more favorable results, but neither device performed as well as might have been expected.

Fink, M. P.↗
NASA NTRS1974

Forward slanted slot throat stability bypass to increase the stable airflow range of a Mach 2.5 inlet with 60 percent internal contraction

The results of an experimental investigation to increase the stable airflow operating range of a supersonic mixed-compression inlet are presented. Two forward-slanted slot stability-bypass entrance configurations were tested. In terms of diffuser-exit corrected airflow, a large inlet stable airflow range of 18.5 percent was obtained with the superior configuration if a constant pressure was maintained in the bypass plenum. Limited unstart angle-of-attack data are presented.

Shaw, R. J.↗
NASA NTRS1974

Flush-mounted dielectric-loaded axial slot on circular cylinder

The theory, computer program, and numerical results of an investigation of an axial slot antenna on a circular cylinder are discussed. The cylinder is partially coated with a dielectric layer and the antenna radiates through a flush mounted window. The study was conducted to determine the effects of a high temperature dielectric layer on the performance of antennas mounted on a space shuttle. Mathematical models are developed to show the relationships of the parameters. Curves are developed to compare the theoretical and actual far field radiation patterns.

Richmond, J. H.↗
NASA NTRS1974

An integral equation formulation for predicting radiation patterns of a space shuttle annular slot antenna

An integral equation formulation is applied to predict pitch- and roll-plane radiation patterns of a thin VHF/UHF (very high frequency/ultra high frequency) annular slot communications antenna operating at several locations in the nose region of the space shuttle orbiter. Digital computer programs used to compute radiation patterns are given and the use of the programs is illustrated. Experimental verification of computed patterns is given from measurements made on 1/35-scale models of the orbiter.

Jones, J. E.↗
NASA NTRS1974

Application of an integral equation formulation to the prediction of space shuttle annular slot antenna radiation patterns

Pitch and roll plane radiation patterns computed by use of an integral equation formulation are presented for a space shuttle annular slot communications antenna. The excellent agreement between computed patterns and experimental patterns obtained from 1/35 scale models supports the use of this method as a design tool for similar spacecraft/aircraft antenna applications.

Jones, J. E.↗
NASA NTRS1973

Noise tests of a high-aspect-ratio slot nozzle with various V-gutter target thrust reversers

The results of experiments on the noise generated by a 1.33 x 91.4 cm slot nozzle with various V-gutter reversers are presented. The experiments were conducted with near-ambient temperature jets at nozzle pressure ratios of 1.25 to 3.0, yielding jet velocities of about 190 to 400 m/sec. At pressure ratios of 2 or less, the reversers, in addition to being noisier than the nozzle alone, also had a more uniform directional distribution and more high-frequency noise. At pressure ratios above 2, the nozzle alone generated enough shock noise that the levels were about the same as for the reversers. The maximum overall sound pressure level and the effective overall sound power level both varied with the sixth power of jet velocity over the range tested.

Stone, J. R.↗
NASA NTRS1975

Acoustics of attached and partially attached flow for simplified OTW configurations with 5:1 slot nozzle

The acoustics of simple engine over-the-wing configurations, with complete and partially attached jet flow to the shielding surface were studied with scale models. The nozzle used consisted of a 5:1 slot nozzle operated at a nominal jet Mach number of 0.6, with the flow directed parallel to and at angles up to 10 deg toward the shielding surface. The flow field at the trailing edge of each nozzle/surface configuration was mapped. the results indicate that, with attached flow, the jet flow field is stretched in the flow direction resulting in locally higher velocities than those for partially attached flow or nozzle only flow. The stretching of the flow field increases the noise levels for the attached flow cases compared to those with only partially attached flow. With attached flow, the shielding benefits are substantially reduced compared with fully detached flow.

Vonglahn, U.↗
NASA NTRS1975

Flush-mounted dielectric-loaded axial slot on circular cylinder

An investigation is conducted of electric field patterns of a TE axial slot antenna which radiates through a dielectric window in a circular cylinder. The cylinder is partially coated with a dielectric layer. The investigation is to provide information regarding the effects of a high-temperature dielectric layer on the performance of antennas mounted on a space shuttle. Numerical results are presented for the far-field patterns. It is pointed out that the calculations show excellent agreement with experimental measurements.

Richmond, J. H.↗
NASA NTRS1975

Low speed aerodynamic characteristics of a transport model having 42.33 deg swept low wing with supercritical airfoil, double-slotted flaps, and T-tail or low tail

A low-speed investigation was conducted in the Langley V/STOL tunnel over an angle-of-attack range of approximately 4 deg to 24 deg to determine the static longitudinal stability characteristics and high lift performance of a general research model which represented an advanced subsonic transport configuration. The model had a 42.33 deg swept, aspect ratio 7.05 wing with a supercritical airfoil and high lift system consisting of a leading edge device (slat or Kruger flap) and a double-slotted flap. The flaps were deflected for take off and landing configurations and were not deflected for tests of the clean configuration. The model was tested with the horizontal tail in either a T tail or low tail position. The effects of various arrangements of flowthrough nacelles which represent a three engine configuration (two large wing-mounted nacelles and a vertical tail mounted nacelle) and a four engine configuration (four smaller wing-mounted nacelles) were determined.

Fournier, P. G.↗
NASA NTRS1976

OTW noise correlation for variations in nozzle/wing geometry with 5:1 slot nozzles

Acoustic data obtained from a model-scale study with 5:1 slot nozzles are analyzed and correlated in terms of apparent noise sources. Variations in nozzle geometry include roof angle and sidewall cutback. In addition, geometry variations in wing size and flap deflection are included. Three dominant noise sources were evident in the data and correlated: fluctuating lift noise, trailing edge noise and a redirected jet mixing noise that included the effect of reflection of jet noise by the surface. Pertinent variables in the correlations include the shear layer thickness and peak jet flow velocity at the trailing edge.

Vonglahn, U.↗
NASA NTRS1976

Report on the status of a slotted wind tunnel wall representation using the vortex-lattice technique

A combined analytical/experimental program for development of an improved slotted wind-tunnel wall representation is described. The effort is scheduled for completion in 1977. The vortex-lattice technique which is being used as the primary analytical tool for representing both the wind-tunnel and the lifting model is discussed. Comparisons of results obtained to date with available data are presented.

Heltsley, F. L.↗
NASA NTRS1976

Digital time slot display for Omega receiver

Methods of decoding a digital word to display alpha-numeric characters for driving a standard seven-segment LED display have been devised for Omega station identification. The circuit could replace the system now being used in Ohio University's Omega receivers, which lights one of eight LED's to signify the Omega time slot being received. The letters A through H, representing the Omega stations, can be read directly from the seven-segment display.

Smith, R. E.↗
NASA NTRS1975

On the control, stability, and waiting time in a slotted ALOHA random-access system

This paper explores some of the boundaries in performance of slotted ALOHA systems by analyzing a simple and almost optimal centrally supervised control. The control results in a very simple Markov chain model and allows an examination of stability, conditional waiting time distribution of transmitting terminals, and many other system measures. The key to the simplicity is to have a probability of successful packet transmission that is independent of the number of transmitting terminals. In considering waiting time, we calculate the mean and other moments of the waiting time of a terminal when it enters the system to find (n - 1) other terminals already there competing for the channel. Under this control, the average time is proportional to n. The control requires exact knowledge of the number of terminals contending for the channel, and hence is not implementable, except as an approximation.

Ferguson, M. J.↗
NASA NTRS1975

Geometry effects on STOL engine-over-the-wing acoustics with 5:1 slot nozzles

The correspondence of far field acoustic trend with changes in the characteristics of the flow field at the wing trailing edge caused by alterations in the nozzle-wing geometry were determined at model scale with a 5:1 slot nozzle for several STOL-OTW configurations. Nozzle roof angles of 10 to 40 deg were tested with and without cutback of the nozzle sidewalls. With increasing wing size, representing several airframe/engine installations, the jet noise shielding benefits increased. With increasing nozzle roof angle, the jet velocity at the trailing edge was decreased, causing a decrease in trailing-edge and fluctuating lift noise. Cutback of the nozzle sides improved flow attachment and reduced far-field noise. The best flow attachment and least trailing-edge noise generally were obtained with a 40-deg external deflector configuration and a cutback nozzle with a 40-deg roof angle.

Von Glahn, U.↗
NASA NTRS1975

Acoustics of attached and partially attached flow for simplified OTW configurations with 5:1 slot nozzle

The acoustics of simple engine over-the-wing configurations, with complete and partially attached jet flow to the shielding surface, were studied at model scale. The nozzle consisted of a 5:1 slot nozzle operated at a nominal jet Mach number of 0.6, with the flow directed parallel to and at angles up to 10 deg toward the shielding surface. The shielding length of the surface and the nozzle height above the surface were varied. The aerodynamic results indicate that, with attached flow, the jet flow field is stretched in the flow direction resulting in locally higher velocities than those for partially attached flow or nozzle only flow. The stretching of the flow field increased the noise levels for the attached flow cases compared to those with only partially attached flow. With attached flow, the shielding benefits were substantially reduced compared with fully detached flow. Increasing the impingement angle of the jet flow from 0 to 10 deg generally caused the noise levels to increase in the mid and high frequencies.

Von Glahn, U.↗
NASA NTRS1976

OTW noise correlation for variations in nozzle/wing geometry with 5:1 slot nozzles

Acoustic data obtained from a model-scale study with 5:1 slot nozzles are analyzed and correlated in terms of apparent noise sources. Variations in nozzle geometry include roof angle and sidewall cutback. In addition, geometry variations in wing size and flap deflection were included. Three dominant noise sources were evident in the data and correlated: fluctuating lift noise, trailing edge noise and a redirected jet mixing noise that included the effect of reflection of jet noise by the surface. Pertinent variables in the correlations included the shear layer thickness and peak jet flow velocity at the trailing edge.

Von Glahn, U.↗
NASA NTRS1976

OTW noise correlation for several nozzle/wing geometries using a 5:1 slot nozzle with external deflectors

Acoustic spectral data obtained from a model-scale study of several over the wing (OTW) configurations with a 5:1 slot nozzle using various external deflectors are correlated in terms of deflector geometry and flow parameters. Variations in the deflector geometry include deflector size and deflector angle. In addition, geometry variations in flap setting and nozzle chordwise location are included. Three dominant noise sources are correlated: fluctuating lift noise, flap trailing edge noise, and jet mixing noise. Aerodynamic characteristics including lift and thrust measurements, obtained for the various configurations are summarized.

Vonglahn, U. H.↗
NASA NTRS1977

Use of simplified flow separation criteria for slotted flap preliminary design

From experimental correlations of airfoil and flap pressure distributions, it is observed that flow separation is likely to occur when the canonical pressure recovery coefficient (C sub pr) exceeds a critical value. A procedure is described for obtaining the C sub pr parameter from modified inviscid analysis. The procedure has been applied to preliminary design studies of a new slotted flap to determine the influence of shape and location. Experiments are planned to evaluate the flap designed by this procedure.

Wentz, W. H., Jr.↗