Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC MIRROR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Observations of ions with nuclear charge Z greater than or equal to 9 in the inner magnetosphere

The Explorer 45 heavy ion data analysis is extended to ions heavier than fluorine, that is, ions with nuclear charge Z greater than about 9 during and after a major magnetic storm on August 4, 1972. Although the heavy ion detector telescope does not permit a precise identification of these ions, it is pointed out that if they are, for example, magnesium ions, then an equatorially mirroring peak trapped flux of 0.02 ions/sq cm-s-sr-keV is derived on L shells just below L = 3 at energies 12.8-51.2 MeV per ion (533-2133 keV per nucleon). It is noted that other possible ion contributions include silicon and iron. The fluxes of these ions are found to decay on time scales typically several tens of days; this is substantially faster than that of helium ions and slightly faster than that of oxygen ions in the lower MeV range.

Spjeldvik, W. N.↗

High-flux source of low-energy neutral beams using reflection of ions from metals

Reflection of low-energy ions from surfaces can be applied as a method of producing high-flux beams of low-energy neutral particles, and is an important effect in several areas of plasma technology, such as in the edge region of fusion devices. We have developed a beam source based on acceleration and reflection of ions from a magnetically confined coaxial RF plasma source. The beam provides a large enough flux to allow the energy distribution of the reflected neutrals to be measured despite the inefficiency of detection, by means of an electrostatic cylindrical mirror analyzer coupled with a quadrupole mass spectrometer. Energy distributions have been measured for oxygen, nitrogen, and inert gas ions incident with from 15 to 70 eV reflected from amorphous metal surfaces of several compositions. For ions of lighter atomic mass than the reflecting metal, reflected beams have peaked energy distributions; beams with the peak at 4-32 eV have been measured. The energy and mass dependences of the energy distributions as well as measurements of absolute flux, and angular distribution and divergence are reported. Applications of the neutral beams produced are described.

Cuthbertson, John W.↗

Solid-state non-planar internally reflecting ring laser

A solid-state non-planar internally-reflecting ring laser is described including a single piece of solid state laser material which incorporates at least two mirrored surfaces oriented to change the plane of incidence of the propagating ray path to define a ray path having at least four segments defining at least two planes, when the prism is located in a magnetic field of sufficient strength, the laser will lase in a single longitudinal and transverse mode, the magnetic field decoupling the counter propagating waves.

Kane, Thomas J.↗

Isodrastic magnetic fields for suppressing transitions in guiding-centre motion

In a magnetic field, transitions between classes of guiding-centre motion can lead to cross-field diffusion and escape. We say a magnetic field is isodrastic if guiding centres make no transitions between classes of motion. This is an important ideal for enhancing confinement. First, we present a weak formulation, based on the longitudinal adiabatic invariant, generalising omnigenity. To demonstrate that isodrasticity is strictly more general than omnigenity, we construct weakly isodrastic mirror fields that are not omnigenous. Then we present a strong formulation that is exact for guiding-centre motion. We develop a first-order treatment of the strong version via a Melnikov function and show that it recovers the weak version. The theory provides quantification of deviations from isodrasticity that can be used as objective functions in optimal design. The theory is illustrated with some simple examples.

97 MATHEMATICS AND COMPUTING↗

Dispersed ion structures at the poleward edge of the auroral oval: Low-altitude observations and numerical modeling

We have compared the AUREOL 3 (A3) observations of auroral ion precipitation, particularly ion beams, with the results from the global kinetic model of magnetotail plasma of Ashour-Abdalla et al. (1993). We have identified 101 energetic keV H(+) velocity dispersed precipitating ion structures (VDIS) with fluxes above 10(exp -3) ergs./sq cm./s in the A3 record between the end of 1981 and mid-1984. These beams display a systematic increase in energy with increasing latitude and were observed in a narrow region within less than 1 deg in latitude of the polar cap boundary. The VDIS are the most distinctive feature in the auroral zone of the plasma sheet boundary layer. We report first on a statistical analysis of the possible ralationships between magnetic activity or substorm phase and the VDIS properties. Our particle simulations of the precipitating ions have been extended by using a series of modified versions of the Tsyganenko (1989) magnetic field model and by varying the cross-magnetosphere electric field. In the simulations, plasma from a mantle source is subject to strong nonlinear acceleration, forming beams which flow along the PSBL. Only 3 to 4% of these beams precipitate into the ionosphere to form the VDIS while the majority return to the equatorial plane after mirroring and form the thermalized central plasma sheet. The final energy and the dispersion of the beams in the model depend on the amplitude of the cross-tail electric field. Two unsual observations of low-energy (less than 5 keV) O(+) VDIS, shifted by 4 deg 5 deg in invariant latitude equatorward of H(+) VDIS are analyzed in detail. The sparsity of such O(+) events and the absence of the changes in the flux and frequency of occurrence indicate a solar wind origin for the plasma. Finally, large-scale kinetic modeling, even with its simplifications and assumptions (e.g., static magnetic field, solar wind source), reproduces low-altitude auroral ion features fairly well; it may therefore be presented as an appropriate framework into which data on energization and transport of the hot plasma, obtained in the equatorial plane, could be inserted in the near future.

Bosqued, J. M.↗

Electromagnetic Analysis of ITER Electron Cyclotron Emission Components and Support Structures for the Preliminary Design Review

The ITER electron cyclotron emission (ECE) diagnostic system is located at Design Shield Module (DSM) 2, Equatorial Port (EP) 9 to measure electron temperature profile and electron temperature fluctuations and also to assess nonthermal electron distributions via the oblique view. Therefore, ECE has both radial and oblique views with two couples of mirrors for two different optical views. This ECE diagnostic system shall be exposed to significant power due to unabsorbed electron cyclotron heating power in the plasma. It shall also receive large electromagnetic (EM) loads up to 100 MN/m 3 force density due to the eddy currents generated by the short 16-ms transient plasma disruption. The global EM models of EP12 and EP11 with the worst case of plasma disruption Major Disruption Downward Exponential 16 ms Category III (MD_DW_EXP16MS_CATIII) have been provided by ITER. However, the support structure for these critical components, including four mirrors, is still under the design and development phase, especially during the period of preliminary design reviews (PDRs). For those small in-vessel components that are not modeled explicitly for the PDRs, we can extract the magnetic field (B) data and flux variations (dB/dt) at those locations from the global model and then use the B and dB/dt method to calculate the eddy currents, EM forces, and torques on those components in the local submodels. In conclusion, this paper will present the detailed PDR EM analysis results of the ECE components and support structures.

Electromagnetic↗

Origin of circular dichroism in resonant elastic x-ray scattering from magnetic and polar chiral structures

Circular dichroism in resonant elastic x-ray scattering (CD-REXS) has recently been observed in chiral structures composed of multiferroic materials as well as magnetic moments or electric polarization vectors. In order to comprehensively understand the experimental results of these previous studies, we present here in detail the analytical formulation of CD-REXS for one-dimensional helices composed of magnetic moments and electric polarization vectors, respectively. In particular, by comparing CD-REXS for a proper-screw-shaped Bloch-type helix and cycloid-shaped Néel-type helix, we found that CD-REXS for both magnetic and polar helices can discriminate between both types of helices. We also found that the x-ray polarization factor depending on the scattering geometry is a significant factor in determining the characteristics of CD-REXS for chiral structures. The results obtained from the detailed formulas can be intuitively understood using the concept of mirror reflection. In particular, in this way it can be understood that Bloch- and Néel-type helices correspond to truly chiral and achiral structures, respectively, and why CD-REXS is able to distinguish between these two types of helices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tandem-Mirror Ion Source

Improved ion source produces beam of ions at any kinetic energy from 1 to 1,000 eV, with little spread in energy or angle. Such ion beams useful in studies of surface properties of materials, surface etching, deposition, and development of plasma-diagnostic instrumentation. Tandemmirror ion source uses electrostatic and magnetic fields to keep electrons in ionization chamber and assure uniform output ion beam having low divergence in energy and angle.

Biddle, A.↗

Ion temperatures in HIP-1 and SUMMA from charge-exchange neutral optical emission spectra

Ion temperatures were obtained from observations of the H sub alpha, D sub alpha, and He 587.6 nm lines emitted from hydrogen, deuterium, and helium plasmas in the SUMMA and HIP-1 mirror devices at Lewis Research Center. Steady state discharges were formed by applying a radially inward dc electric field between cylindrical or annular anodes and hollow cathodes located at the peaks of the mirrors. The ion temperatures were found from the Doppler broadening of the charge-exchange components of spectral lines. A statistical method was developed for obtaining scaling relations of ion temperature as a function of current, voltage, and magnetic flux density. Derivations are given that take into account triangular monochromator slit functions, loss cones, and superimposed charge-exchange processes. In addition, the Doppler broadening was found to be sensitive to the influence of drift on charge-exchange cross section. The effects of finite ion-cyclotron radius, cascading, and delayed emission are reviewed.

Patch, R. W.↗

Comparison of Echo 7 field line length measurements to magnetospheric model predictions

The Echo 7 sounding rocket experiment injected electron beams on central tail field lines near L = 6.5. Numerous injections returned to the payload as 'conjugate echoes' after mirroring in the southern hemisphere. Field line lengths calculated from measured conjugate echo bounce times and energies are compared to predictions made by integrating electron trajectories through various magnetospheric models. Although Kp at launch was 3-, quiet time magnetic models best fit the echo measurements. Geosynchronous satellite magnetometer measurements near the Echo 7 field lines during the flight were best modeled by the Olson-Pfitzer Dynamic Model and the Tsyganenko-Usmanov model for Kp = 3. The discrepancy between the models that best fit the Echo 7 data and those that fit the satellite data was most likely due to uncertainties in the small-scale configuration of the magnetospheric models. The field line length measured by the conjugate echoes showed some temporal variation in the magnetic field, also indicated by the satellite magnetometers. This demonstrates the utility an Echo-style experiment could have in substorm studies.

Nemzek, R. J.↗

The electrical conductivities of candidate beam-waveguide antenna shroud materials

The shroud on the beam-waveguide (BWG) antenna at DSS 13 is made from highly magnetic American Society for Testing and Materials (ASTM) A36 steel. Measurements at 8.42 GHz showed that this material (with paint) has a very poor electrical conductivity that is 600 times worse than aluminum. In cases where the BWG mirrors might be slightly misaligned, unintentional illumination and poor electrical conductivity of the shroud walls can cause system noise temperature to be increased significantly. This potential increase of noise temperature contribution can be reduced through the use of better conductivity materials for the shroud walls. An alternative is to attempt to improve the conductivity of the currently used ASTM A36 steel by means of some type of plating, surface treatment, or high-conductivity paints. This article presents the results of a study made to find improved materials for future shrouds and mirror supports.

Otoshi, T. Y.↗

Realization of a gas puff imaging system on the Wendelstein 7-X stellarator

A system for studying the spatiotemporal dynamics of fluctuations in the boundary of the W7-X plasma using the “Gas-Puff Imaging” (GPI) technique has been designed, constructed, installed, and operated. This GPI system addresses a number of challenges specific to long-pulse superconducting devices, such as W7-X, including the long distance between the plasma and the vacuum vessel wall, the long distance between the plasma and diagnostic ports, the range of last closed flux surface (LCFS) locations for different magnetic configurations in W7-X, and management of heat loads on the system’s plasma-facing components. The system features a pair of “converging–diverging” nozzles for partially collimating the gas puffed locally ≈135 mm radially outboard of the plasma boundary, a pop-up turning mirror for viewing the gas puff emission from the side (which also acts as a shutter for the re-entrant vacuum window), and a high-throughput optical system that collects visible emission resulting from the interaction between the puffed gas and the plasma and directs it along a water-cooled re-entrant tube directly onto the 8 × 16 pixel detector array of the fast camera. The DEGAS 2 neutral code was used to simulate the Hα (656 nm) and HeI (587 nm) line emission expected from well-characterized gas-puffs of H2 and He and excited within typical edge plasma profiles in W7-X, thereby predicting line brightnesses used to reduce the risks associated with system sensitivity and placement of the field of view. Operation of GPI on W7-X shows excellent signal-to-noise ratios (>100 at 2 Mframes/s) over the field of view for minimally perturbing gas puffs. The GPI system provides detailed measurements of the two-dimensional (radial and poloidal) dynamics of plasma fluctuations in the W7-X edge and scrape-off layer and in and around the magnetic islands outside the LCFS that make up the island divertor configuration employed on W7-X.

Instruments & Instrumentation↗

Magnetic Clouds at/near the 2007 - 2009 Solar Minimum: Frequency of Occurrence and Some Unusual Properties

Magnetic clouds (MCs) have been identified for the period 2007 2009 (at/near the recent solar minimum) from Wind data, then confirmed through MC parameter fitting using a force-free model. A dramatic increase in the frequency of occurrence of these events took place from the two early years of 2007 (with five MCs) and 2008 (one MC) compared to 2009 (12 MCs). This pattern approximately mirrors the occurrence-frequency profile that was observed over a three-year interval 12 years earlier, with eight events in 1995, four in 1996, and 17 in 1997, but decreased overall by a factor of 0.62 in number. However, the average estimated axial field strength taken over all of the 18 events of 2007 - 2009 (called the "recent period" here) was only 11.0 nT, whereas |BO| for the 29 events of 1995 - 1997 (called the "earlier period" ) was 16.5 nT. This 33% average drop in |BO| is more or less consistent with the decreased three-year average interplanetary magnetic field intensity between these two periods, which shows a 23% drop. In the earlier period, the MCs were clearly of mixed types but predominantly of the South-to-North type, whereas those in the recent period are almost exclusively the North-to-South type; this change is consistent with global solar field changes predicted by Bothmer and Rust (Geophys. Monogr. Ser. 99, 139, 1997). As we have argued in earlier work (Lepping and Wu, J. Geophys. Res. 112, A10103, 2007), this change should make it possible to carry out (accurate short-term) magnetic storm forecasting by predicting the latter part of an MC from the earlier part, using a good MC parameter-fitting model with real-time data from a spacecraft at L1, for example. The recent set s average duration is 15.2 hours, which is a 27% decrease compared to that of the earlier set, which had an average duration of 20.9 hours. In fact, all physical aspects of the recent MC set are shown to drop with respect to the earlier set; e.g., as well as the average internal magnetic field drop, the recent set had a somewhat low average speed of 379 km/s (5% drop), and the average diameter had a 24% drop. Hence, compared to the earlier set, the recent set consists of events that are smaller, slightly slower, and weaker in every respect (and fewer in number), but in a relative sense the two three-year sets have similar frequency-of-occurrence profiles. It is also interesting that the two sets have almost the same average axial inclinations, i.e., axial latitude approx. = 31deg (in GSE). These MC characteristics are compared to relevant solar features and their changes. A preliminary assessment of the statistics on possible shocks and pressure pulses upstream of these recent MCs yields the following: About 28% of the MCs, at most, had shocks, and 33% had shocks and/or pressure pulses. These are low values, since typically the percentage of cases with shocks is about 50%, and the percentage with shocks and/or pressure pulses is usually about 75%.

Lepping. R. P.↗

A General Relativistic Magnetohydrodynamics Simulation of Jet Formation with a State Transition

We have performed the first fully three-dimensional general relativistic magnetohydrodynamic (GRMHD) simulation of jet formation from a thin accretion disk around a Schwarzschild black hole with a free-falling corona. The initial simulation results show that a bipolar jet (velocity sim 0.3c) is created as shown by previous two-dimensional axisymmetric simulations with mirror symmetry at the equator. The 3-D simulation ran over one hundred light-crossing time units which is considerably longer than the previous simulations. We show that the jet is initially formed as predicted due in part to magnetic pressure from the twisting the initially uniform magnetic field and from gas pressure associated with shock formation. At later times, the accretion disk becomes thick and the jet fades resulting in a wind that is ejected from the surface of the thickened (torus-like) disk. It should be noted that no streaming matter from a donor is included at the outer boundary in the simulation (an isolated black hole not binary black hole). The wind flows outwards with a wider angle than the initial jet. The widening of the jet is consistent with the outward moving shock wave. This evolution of jet-disk coupling suggests that the low/hard state of the jet system may switch to the high/soft state with a wind, as the accretion rate diminishes.

Nishikawa, K. I.↗

3-D GRMHD Simulations of Disk-Jet Coupling and Associated Variabilities and Emission

We have performed the fully three-dimensional general relativistic magnetohydrodynamic (GRMHD) simulation of jet formation from a thin accretion disk around a Schwarzschild black hole with a free-falling corona. The initial simulation results show that a bipolar jet is created as shown by previous two-dimensional axisymmetric simulations with mirror symmetry at the equator. The 3-D simulation ran over one hundred light-crossing time units which is considerably longer than the previous simulations. We show that the jet is initially formed as predicted due in part to magnetic pressure from the twisting the initially uniform magnetic field and from gas pressure associated with shock formation in the region around r = 3 r_S. At later times, the accretion disk becomes thick and the jet fades resulting in a wind that is ejected from the surface of the thickened (torus-like) disk. It should be noted that no streaming matter from a donor is included at the outer boundary in the simulation (an isolated black hole not binary black hole). The wind flows outwards with a wider angle than the initial jet. The widening of the jet is consistent with the outward moving torsional Alfven waves (TAWs). This evolution of disk-jet coupling suggests that the jet fades with a thickened accretion disk due to the lack of streaming material from an accompanying star. We will report initial results of emission calculated based on simulations with Kerr metric using a new ray-tracing method developed by S. Feurst and K. Wu. Images include free-free emission, absorption, and electron scattering. Fluorescent iron line emission and its variabilities from black holes will also be calculated based on simulation results.

Nishikawa, K. I.↗

Analysis of the ghost and mirror fields in the Nernst signal induced by superconducting fluctuations

In this work, we present a complete analysis of the Nernst signal due to superconducting fluctuations in a large variety of superconductors from conventional to unconventional ones. A closed analytical expression of the fluctuation contribution to the Nernst signal is obtained in a large range of temperature and magnetic field. We apply this expression directly to experimental measurements of the Nernst signal in Nb x Si 1-x thin films and URu 2 Si 2 superconductors. Both magnetic field and temperature dependence of the available data are fitted with very good accuracy using only two fitting parameters, the superconducting temperature T c0 and the upper critical field H c2 (0). The obtained values agree very well with experimentally obtained values. We also extract the ghost lines (the maximum of the Nernst signal for constant temperature or magnetic field) from the complete expression and also compare it to several experimentally obtained curves. Our approach predicts a linear temperature dependence for the ghost critical field well above T c0 . Within the errors of the experimental data, this linearity is indeed observed in many superconductors far from T c0 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Frieze charge-stripes in a correlated kagome superconductor

In kagome metals, geometric frustration, electronic correlations and band topology combine to produce a wide range of intriguing phenomena. Among them, CsCr$_3$Sb$_5$ offers an opportunity to investigate unconventional superconductivity in a strongly correlated kagome system, with indications of frustrated magnetism and quantum criticality. Here, we demonstrate a cascade of density-wave transitions with distinct symmetries in bulk single crystals of CsCr$_3$Sb$_5$. Using spectroscopic imaging scanning tunneling microscopy, we uncover a unidirectional density wave that breaks all mirror symmetries -- resembling a chiral density wave -- but that also retains a mirror glide symmetry. We refer to this as a frieze charge stripe order phase, as its symmetry properties correspond to one of the fundamental frieze symmetry groups. A combination of high-resolution imaging, Fourier analysis and theoretical simulations reveal the key role of sublattice degrees of freedom in stabilizing this phase, characterized by internal chiral textures of opposite handedness. These findings suggest that superconductivity in CsCr$_3$Sb$_5$ emerges from this distinct density wave state and provide fresh insight into realizing electronic phases governed by frieze symmetry groups in quantum materials.

Cheng, Siyu [Boston College, Chestnut Hill, MA (Un↗

Network model for periodically strained graphene

The long-wavelength physics of monolayer graphene in the presence of periodic strain fields has a natural chiral scattering network description. When the strain field varies slowly compared to the graphene lattice and the effective magnetic length of the induced valley pseudomagnetic field, the low-energy physics can be understood in terms of valley-polarized percolating domain-wall modes. Inspired by a recent experiment, we consider a strain field with threefold rotation and mirror symmetries but without twofold rotation symmetry, resulting in a system with the connectivity of the oriented kagome network. Scattering processes in this network are captured by a symmetry-constrained phenomenological S matrix. Here, we analyze the phase diagram of the kagome network and show that the bulk physics of the strained graphene can be qualitatively captured by the network when we account for a percolation transition at charge neutrality. We also discuss the limitations of this approach to properly account for boundary physics.

36 MATERIALS SCIENCE↗