Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stemming”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Functional stability of cerebral circulatory system

The functional stability of the cerebral circulation system seems to be based on the active mechanisms and on those stemming from specific of the biophysical structure of the system under study. This latter parameter has some relevant criteria for its quantitative estimation. The data obtained suggest that the essential part of the mechanism for active responses of cerebral vessels which maintains the functional stability of this portion of the vascular system, consists of a neurogenic component involving central nervous structures localized, for instance, in the medulla oblongata.

Moskalenko, Y. Y.↗

Effect of type of explosives and physical-mechanical properties of explosive rock on formation of toxic gases in atmosphere of shafts

The quality of toxic gases formed during explosive work in underground shafts depends upon the type of explosives and the conditions of explosion. Several types of explosives and rocks were examined. All remaining conditions were maintained the same (sandy-argillaceous stemming, electrical method of explosions, diameter of blast holes, and the direct triggering of charges).

Mindeli, E. O.↗

Changes in the terrestrial atmosphere-ionosphere-magnetosphere system due to ion propulsion for solar power satellite placement

In order to construct solar power satellites using earth-based materials, sections of a satellite must be lifted from low earth to geosynchronous orbit. The most plausible method of accomplishing this task is by means of ion propulsion based on the relatively abundant terrestrial atmospheric component, Ar. The proposed propulsion system will release a dense beam of about 5 keV Ar(+). The total amount of Ar(+) injected in transporting the components for each solar power satellite is comparable to the total ion content of the ionosphere-plasmasphere system while the total energy injected is larger than that of this system. Preliminary estimates are given of the effects massive Ar(+) injections have on the ionosphere-plasmasphere system with specific emphasis on potential communications disruptions. The effects stem from direct Ar(+) precipitation into the atmosphere and from Ar(+) beam induced precipitation of MeV radiation belt protons.

Curtis, S. A.↗

Fog dispersion

A study of economically viable techniques for dispersing warm fog at commercial airports is presented. Five fog dispersion techniques are examined: evaporation suppression, downwash, mixing, seeding with hygroscopic material, thermal techniques, and charged particle techniques. Thermal techniques, although effective, were found to be too expensive for routine airport operations, and detrimental to the environment. Seeding or helicopter downwash are practical for small-scale or temporary fog clearing, but are probably not useful for airport operations on a routine basis. Considerable disagreement exists on the capability of charged particle techniques, which stems from the fact that different assumptions and parameter values are used in the analytical models. Recommendations resulting from the review of this technique are listed, and include: experimental measurements of the parameters in question; a study to ascertain possible safety hazards, such as increased electrical activity or fuel ignition during refueling operations which could render charged particle techniques impractical; and a study of a single charged particle generator.

Frost, W.↗

The effects of cold plasma on the Kelvin-Helmholtz instability

The results are presented of a detailed study that examines the effects of cold plasma on the Kelvin-Helmholtz instability. Both electrostatic and electromagnetic modes are considered. The interest in the Kelvin-Helmholtz instability stems from observations of low frequency waves in the polar cusp, magnetopause, in fast moving auroral forms, the plasma pause, and other regions of magnetospheric flow boundaries. It is pointed out that the Kelvin-Helmholtz instability is driven by a velocity shear and can excite a broad spectrum of wave frequencies below the ion gyrofrequency. A model is obtained of a flow boundary that includes a density gradient perpendicular to the velocity shear. The analysis shows a compressional component in Kelvin-Helmholtz waves.

Melander, B. G.↗

Parameter estimation for slit-type scanning sensors

The Infrared Astronomical Satellite, scheduled for launch into a 900 km near-polar orbit in August 1982, will perform an infrared point source survey by scanning the sky with slit-type sensors. The description of position information is shown to require the use of a non-Gaussian random variable. Methods are described for deciding whether separate detections stem from a single common source, and a formulism is developed for the scan-to-scan problems of identifying multiple sightings of inertially fixed point sources for combining their individual measurements into a refined estimate. Several cases are given where the general theory yields results which are quite different from the corresponding Gaussian applications, showing that argument by Gaussian analogy would lead to error.

Fowler, J. W.↗

Two-Speed Valve

Operating torque adjustment of two-speed valve provided by preload spring and nut. Torque is adjusted so user finds valve easy to turn but does not turn it too quickly during fast-moving portion of valve stem travel. Drive pin transmits torque to differential nut.

Drapeau, D. F.↗

Deep-Access Valve Wrench

Bent rod on modified basin wrench holds wrench jaw against valve stem. Rod swivels to accomodate 180 degrees rotation of wrench jaw. Valves 5 feet (1.5 meters) underground can be operated with tool.

Fleck, H. E.↗

Detection of variations in aspen forest habitat from LANDSAT digital data: Bear River Range, Utah

The aspen forests of the Bear River Range were analyzed and mapped using data recorded on July 2, 1979 by the LANDSAT III satellite; study efforts yielded sixty-seven light signatures for the study area, of which three groups were identified as aspen and mapped at a scale of 1:24,000. Analysis and verification of the three groups were accomplished by random location of twenty-six field study plots within the LANDSAT-defined aspen areas. All study plots are included within the Cache portion of the Wasatch-Cache National Forest. The following selected site characteristics were recorded for each study plot: a list of understory species present; average percent cover density for understory species; aspen canopy cover estimates and stem measurements; and general site topographic characteristics. The study plot data were then analyzed with respect to corresponding Landsat spectral signatures. Field studies show that all twenty-six study plots are associated with one of the three aspen groups. Further study efforts concentration on characterizing the differences between the site characteristics of plots falling into each of the three aspen groups.

Merola, J. A.↗

Mass loss from cool stars, facts, fads, and fallacies

The accumulation of observational material (ultraviolet spectroscopic measures, quantitative optical spectroscopy, and X-ray photometry) and its use in discerning the presence and character of mass loss across the cool half of the H-R diagram and establishing constraints on theoretical models are discussed. Analogies with closed and open solar magnetic structures are found. Two determinants of atmospheric wind structure, temperature and gravity, may suffice in a most superficial way to define the wind and atmospheric structure in a star, however it is apparent that there is still a missing parameter which may stem from magnetic activity and its particular configuration. Theories that appear successful in reproducing observed line profiles, wind temperatures, and terminal velocities incorporate Alfven wave heating and momentum deposition. Successive observations of an active binary (lambda and G8III-IV) and a supergiant star, alpha Aqr (G2 Ib) revealed that magnetic activity and perhaps mass loss occur on restricted regions of a stellar surface and that long-term structures are present in the wind. These phenomena are present in the solar atmosphere and wind and may be considered a general characteristic of stellar winds.

Dupree, A. K.↗

The interstellar dust as a precursor of Ca,Al-rich inclusions in carbonaceous chondrites

Multiple dust components are considered as a source of the observed anomalies in meteoritic oxygen isotope compositions. It is pointed out that these anomalies are not due to an incomplete mixing of several dust or gas-plus-dust components in the solar nebula. If they were, other elements would display similar anomalies. The anomalies must therefore stem from differing degrees of incomplete exchange of oxygen isotopes between the primordial gas and dust components of the nebula. The dust is more likely to have been the component which was enriched with 0-16. Since the isotopic difference between dust and gas probably could not have been preserved if the dust was ever completely vaporized in the nebula, the Ca,Al-rich inclusions in carbonaceous chondrites are unlikely to be condensates, but instead are distillation residues.

Wood, J. A.↗

Evolution of the rhodospirillaceae and mitochondria - A view based on sequence data

New sequence data from several protein families and from 5S ribosomal RNA confirm and elaborate a previously proposed description of the phylogenetic connections between a variety of bacteria and the eukaryotes. Probably, the first organisms were nonphotosynthetic anaerobic prokaryotes, which were followed soon by photosynthetic anaerobes. From this photosynthetic stock, the aerobic line to Pseudomonadacae, Rhodospirillaceae, and blue-greens arose. The eukaryotes derived genetic material from the symbioses of at least three separate bacterial lines. Ancestors of Rhodopseudomonas globiformis gave rise to the eukaryote mitochondria, probably through at least three separate symbioses, one early on the flagellate line, one on the ciliate line, and one on the stem to the multicellular forms.

Dayhoff, M. O.↗

Evolution of major metabolic innovations in the Precambrian

A combination of information on the metabolic capabilities of prokaryotes with a composite phylogenetic tree depicting an overview of prokaryote evolution based on the sequences of bacterial ferredoxin, 2Fe-2S ferredoxin, 5S ribosomal RNA, and c-type cytochromes shows three zones of major metabolic innovation in the Precambrian. The middle of these, which reflects the genesis of oxygen-releasing photosynthesis and aerobic respiration, links metabolic innovations of the anaerobic stem on the one hand and, on the other, proliferation of aerobic bacteria and the symbiotic associations leading to the eukaryotes. Those pathways where information on the structure of the enzymes is known are especially considered. Halobacterium and Thermoplasma (archaebacteria) do not belong to a totally independent line on the basis of the composite tree but branch from the eukaryote cytoplasmic line.

Barnabas, J.↗

Existence of a component corotating with the earth in high-latitude disturbance magnetic fields

A study of the data from the high-latitude North American IMS network of magnetic stations suggests that there is a component in substorm perturbations that corotates with the earth. It is as yet not certain whether the existence of this component stems from the corotation of a part of the magnetospheric plasma involved in the substorm mechanism or if it is a 'phase change' resulting from the control of the substorm manifestations by the earth's main magnetic field which is not axially symmetric. There are other geophysical phenomena showing a persistence of longitudinal variations corotating with the earth. These phenomena are of significance for a better understanding of ionosphere-magnetosphere coupling.

Suzuki, A.↗

On finite deformation elasto-plasticity

Lee (1969) has proposed a theory based on the decomposition of the total deformation gradient to an elastic and plastic part, and from it has concluded that the additive decomposition of the strain rates holds only approximately. Lubarda and Lee (1981) have declared that Lee's 'exact finite-deformation kinematics shows the almost universal assumption that the total velocity strain or rate of deformation is the sum of elastic and plastic rates to be in error'. Hence questions are raised regarding the validity of essentially all finite deformation elasto-plasticity theories. The present investigation is concerned with these questions. It is shown that the additive decomposition of the strain rates follows from all common finite elasto-plasticity concepts. Lee's theory is examined, and it is shown that this theory also leads to an additive strain rate decomposition, and therefore, his conclusion stems from misinterpretation. It is found that the elastic and the plastic strain rates considered by Lee do not correspond to the same configuration. They are, therefore, not compatible measures.

Nemat-Nasser, S.↗

Ion-beam-induced topography and surface diffusion

It is pointed out that the development of surface topography along with enhanced surface and bulk diffusion processes accompanying ion bombardment have generated growing interest among users of ion beams and plasmas for thin film or material processing. Interest in these processes stems both from attempts to generate topographic changes for specific studies or applications and from the need to suppress or control undesirable changes. The present investigation provides a summary of the current status of impurity-induced texturing, with emphasis on recent developments. Particular attention is given to the texturing accompanying deposition of an impurity material onto a solid surface while simultaneously etching the surface with an ion beam. A description of experimental considerations is provided, and a thermal-diffusion model is discussed along with the development of sputter cones, and aspects of impact-enhanced surface diffusion.

Robinson, R. S.↗

Variation of directional reflectance factors with structural changes of a developing alfalfa canopy

Directional reflectance factors of an alfalfa canopy were determined and related to canopy structure, agronomic variables, and irradiance conditions at four periods during a cutting cycle. Nadir and off-nadir reflectance factors decreased with increasing biomass in Thematic Mapper band 3(0.63-0.69 micrometer) and increased with increasing biomass in band 4(0.76-0.90 micrometer). The sensor view angle had less impact on perceived reflectance as the alfalfa progressed from an erectophile canopy of stems after harvest to a near planophile canopy of leaves at maturity. Studies of directional reflectance are needed for testing and upgrading vegetation canopy models and to aid in the complex interpretation problems presented by aircraft scanners and pointable satellites where illumination and viewing geometries may vary widely. Distinct changes in the patterns of radiance observed by a sensor as structural and biomass changes occur are keys to monitoring the growth and condition of crops.

Kirchner, J. A.↗

Tool for Guiding An Auger

Auger and Ram have same pitch, which minimizes damage to workpiece and load carried by auger. Auger firmly fastened onto ram shaft by screw and kept from rotating on shaft by slot machined into end of stem and male driving lug that engages slot. Used to install threaded studs in plastic or rubber where impractical to mold them in.

Wesselski, C. J.↗