Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MICROELECTRONICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Solid state dewetting of thin plasmonic films under focused cw-laser irradiation

Elevated temperatures and large thermal gradients are a significant source of component failure in microelectronics, and is the limiting factor in heat-assisted magnetic recording (HAMR). Here, we have investigated the effect of solid-state dewetting in Au thin films, as a function of local temperature, film thickness, and substrate adhesion. In this work, a localised temperature rise is induced in thin (≤ 50 nm) polycrystalline Au films on SiO 2 substrates via focused continuous-wave laser irradiation at 488 nm. The magnitude and distribution of the total temperature rise is measured using CCD-based thermoreflectance. This also allows a sensitive measurement of the temperature at which dewetting occurs, showing that for thin (≤ 50 nm) Au films without adhesion layers, rapid dewetting can occur at temperatures as low as 50° C. The time decay of the reflected light from the illuminating laser is used to monitor locally the dynamics of solid state dewetting. TEM diffraction analysis shows significant changes in the microstructure and crystallographic texture of the films as far as 10 µm away from the illuminated area. The use of a thin metallic adhesion layer (such as Ti or Cr) is shown to significantly improve the adhesion of the Au to the substrate and reduce the tendency towards dewetting, but does not entirely protect it from changes to the crystallographic texture.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Uranium integral fission product yields for a spectrally-shaped 14.1 MeV neutron source at the National Ignition Facility

This paper describes the experimental results for an energy tuning assembly created to modify the National Ignition Facility deuterium–tritium fusion neutron source into a notional thermonuclear and prompt fission neutron spectrum, which has applications in integral measurements, nuclear data benchmarks, and radiation effects on microelectronics. The Monte Carlo neutron transport utilized MCNP5 to estimate the ETA-modified fluence using the ENDF-B/VIII.0 and IRDFF-II continuous energy nuclear data libraries, and SCALE Sampler was used to estimate the systematic nuclear data covariance using ENDF-B/VII.1 and IRDFF-II in a 252-group structure. The experiment fielded eight activation foils and a highly enriched uranium sample. This provided fifteen reaction channels that were used in a forward-fit comparison to the modeled results and to unfold the neutron spectrum using STAYSL. Gamma-ray spectrometry was performed on the activation and highly enriched uranium foils, and the reduced Χ 2 between the modeled and experimental values was 1.21. The results from the STAYSL unfold, reduced Χ 2 = 1.62, indicated that the modeled neutron spectrum was achieved and the systematic nuclear data uncertainty associated with the neutron transport and activation product cross sections was representative of the experiment. Integral cumulative fission product yield data were collected for 37 mass chains with a combination of gamma-ray spectrometry and radiochemical analysis. Fission product analysis was generally in agreement with two models using a semi-empirical fit and the General Observables of Fission code, with the exception of mass chains 88, 109, 111, 112, 113, 129, 139, 142, 144, 151, and 156.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Site-specific surface reactivity on MgO for atomic layer deposition via selective hydration

Atomic layer deposition (ALD) is a powerful technique for thin film synthesis, offering atomic-scale precision and conformality. While ALD of MgO has been widely studied for applications in energy storage and microelectronics, its potential as surface on which deposition may be selective and defects repaired remains underexplored. Here, we present a combined theoretical and experimental investigation of MgO surface hydration and its implications for targeted ALD growth using water and dimethyl aluminum isopropoxide (DMAI) as reactants. We perform density functional theory (DFT) calculations to examine molecular and dissociative H 2 O adsorption on MgO (100) terraces and step-edge sites, including pristine surfaces and those with Mg/O vacancies. Reaction Gibbs free energies are calculated under various conditions to quantify surface reactivity. Our findings reveal facet- and defect-dependent hydration behaviors that align with experimental ALD growth trends on MgO (100). This study provides a molecular-level understanding of MgO surface chemistry critical for optimizing ALD processes for thin film growth and defect repair.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Nonvolatile electrochemical memory at 600°C enabled by composition phase separation

Silicon-based microelectronics are limited to ~150°C and therefore not suitable for the extremely high temperatures in aerospace, energy, and space applications. While wide-band-gap semiconductors can provide high-temperature logic, nonvolatile memory devices at high temperatures have been challenging. In this work, we develop a nonvolatile electrochemical memory cell that stores and retains analog and digital information at temperatures as high as 600°C. Through correlative scanning transmission electron microscopy, we show that this high-temperature information retention is a result of composition phase separation between the oxidized and reduced forms of amorphous tantalum oxide. This result demonstrates a memory concept that is resilient at extreme temperatures and reveals phase separation as the principal mechanism that enables nonvolatile information storage in these electrochemical memory cells.

42 ENGINEERING↗
DOE OSTI2018

Toward an Understanding of Surface Layer Formation, Growth, and Transformation at the Glass–Fluid Interface

Silicate glass is a metastable and durable solid that has application to a number of energy and environmental challenges (e.g., microelectronics, fiber optics, and nuclear waste storage). If allowed to react with water over time silicate glass develops an altered layer at the solid-fluid interface. In this study, we used borosilicate glass (LAWB45) as model material to develop a robust understanding of altered layer formation (i.e., amorphous hydrated surface layer and crystalline reaction products). Experiments were conducted at high surface area-to-volume ratio (~200,000 m-1) and 90 °C in the pressurized unsaturated flow (PUF) apparatus for 1.5-years to facilitate the formation of thick altered layers and allow for the effluent solution chemistry to be monitored continuously. A variety of microscopy techniques were used to characterized reacted grains and suggest the average altered layer thickness is 13.2 ± 8.3 μm with the hydrated and clay layer representing 74.8% and 25.2% of the total altered layer, respectively. This estimate is within the experimental error of the value estimated from the B release rate data (~10 ±1 μm/yr) over the 1.5-year duration. PeakForce® quantitative nanomechanical mapping results suggest the hydrated layer has a modulus that ranges between ~20 to 40 GPa, which is in the range of porous silica that contains from ~20 to ~50% porosity, yet significantly lower than dense silica (~70 to 80 GPa). Scanning transmission electron microscopy (STEM) images confirm the presence of pores and an analysis of a higher resolution image of a region provides a qualitative estimate of ≥ 22% porosity in this layer with variations in the hydrated layer in void volume with increasing distance from the unaltered glass. Chemical composition analyses, based on a combination of time-of-flight secondary-ion mass spectrometry (ToF-SIMS) and scanning electron microscopy with X-ray energy dispersive spectroscopy (EDS) and STEM-EDS, clearly show that the altered layer is mainly composed of Al, H, Si, and O with the clay layer being enriched in Li, Zn, Fe, and Mg. The amorphous hydrated layer is enriched in Ca, H, and Zr with a minor amount of K. Furthermore, ToF-SIMS results also suggest the B profile is anti-correlated with the H profile in the hydrated layer. Our selected-area electron diffraction results suggest the structure of the hydrated layer closely resembles opal-AG (amorphous gel-like) with an average crystallite size of ~0.7 nm which is smaller than the critical nucleus for silica nanoparticles (i.e., 1.4 to 3 nm). These results suggest the hydrated layer is more consistent with a polymeric gel rather than a colloidal gel and is comprised of molecular units (<1 nm in size) that result from the difficult to hydrolyze bonds, such as Si—O—Zr units, during the glass corrosion process. The size of individual particles or molecular units is a function of formation conditions (e.g., pH, ionic strength, nano-confinement, solute composition) in the hydrated layer.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A remarkable CHF of 345W/cm 2 is achieved in a wicked-microchannel using HFE-7100

Boiling heat transfer of dielectric fluids is a promising cooling technique for thermal management of microelectronic systems. However, the critical heat flux achievable is generally low, because of the poor thermophysical properties of these fluids. Here, to address this dilemma, we propose a new cooling concept to substantially enhance global liquid supply during phase-change process using enhanced capillary-driven force. Additionally, dedicated vapor pathways are designed among a bank of micro-pillars to facilitate vapor removal. In this work, new wicks comprised of silicon micro-pinfin arrays are explored to significantly enhance the flow boiling heat transfer performance. To examine the functionalities of this wick, experiments on HFE-7100 were carried out with mass velocities varying from 247 to 3,465 kg/m 2 s. To explore the enhancement mechanisms and to analyze the capillary-assisted flow boiling process, visualization studies were conducted. The results indicate that sustainable evaporation induced by wick microstructures and efficient liquid supply are the enhancement mechanisms compared to parallel microchannels with solid walls. It is found that the overall heat transfer coefficient is substantially increased up to 75%. Remarkably, a high critical heat flux (CHF) of approximately 345 W/cm 2 is recorded at G = 3,465 kg/m 2 s at coolant inlet temperature of ~20 °C. Equally importantly, this noticeable enhancement of CHF value is associated with drastically decreased pressure drops compared to microchannels decorated with μ-pinfin fences.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Personal power using metal-supported solid oxide fuel cells operated in a camping stove flame

A complete stand-alone product prototype providing combined cooking and power is fabricated by retrofitting a commercial camping stove with a stack of metal-supported solid oxide fuel cells (MS-SOFCs) delivering power to microelectronic LED driver and voltage boost circuits. The 5-cell stack produces 2.7 W (156 mW cm -2 ) while cooking on the stove, and is demonstrated to produce LED lighting and mobile phone charging while operating outdoors. Cooking efficiency is minimally impacted by the presence of the MS-SOFCs. As a result, it is found that vertical orientation of the cells is critical to maintain separation of fuel and air when a pot is placed on the stove.

25 ENERGY STORAGE↗
DOE OSTI2025

In-situ synchrotron X-ray study on microstructure and stress evolutions of electroplated copper upon self-annealing

Background: The self-annealing behavior of electroplated copper (Cu) at room temperature is gaining attention in the microelectronics industry due to its significant impact on reliability issues such as substrate warpage and electrical resistivity. Methods: In this study, in-situ analysis of the microstructure transition and stress relaxation of the electroplated copper upon self-annealing was conducted via synchrotron white X-ray nanodiffraction (beamline 21A, Taiwan Photon Source) and grazing-incidence X-ray diffraction (beamline 17B1, Taiwan Light Source). Significant Findings: Remarkable relaxations of deviatoric stress and absolute strain component along the [002] direction were closely related to the Cu grain growth and crystallographic reorientation at the early stage of selfannealing, and a complete stress/strain relaxation can be achieved with the cessation of microstructure transition. In conclusion, the in-situ synchrotron X-ray studies provided an insight into Cu self-annealing mechanism, offering valuable information for improving Cu interconnect reliability.

Cu Self-annealing↗
DOE OSTI2020

Three-Dimensional Microbatteries beyond Lithium Ion

Ubiquitous implementation of microelectronics in microelectromechanical systems requires stable power supplies and necessitates development of on-chip miniature power sources, such as microbatteries. However, conventional thin-film batteries exhibit limited surface area and sluggish diffusion kinetics with insufficient energy and power density. In contrast, three-dimensional (3D) beyond-lithium (sodium, zinc, aluminum, etc.) battery architectures can significantly enhance the areal energy and power and meanwhile maintain the low-cost mass production. Despite this, the future of beyond-lithium systems is being questioned as they each present shortcomings. In this Comment, we discuss scientific advancements in reaction kinetics control, electrochemical stability improvements, and reaction mechanism understandings in 3D beyond-lithium battery systems, and finally, call for intensive research effort to address the challenges and develop strategies that can pave the way toward their commercialization.

25 ENERGY STORAGE↗
DOE OSTI2022

Persistent hot carrier diffusion in boron arsenide single crystals imaged by ultrafast electron microscopy

Cubic boron arsenide (BAs) is promising for microelectronics thermal management because of its high thermal conductivity. Recently, its potential as an optoelectronic material is also being explored. However, it remains challenging to measure its photocarrier transport properties because of small sizes of available high-quality crystals. Here, we use scanning ultrafast electron microscopy (SUEM) to directly visualize the diffusion of photocarriers in BAs single crystals. Surprisingly, we observed ambipolar diffusion at low optical fluence with persistent hot carrier dynamics for above 200 ps, which can likely be attributed to the large frequency gap between acoustic and optical phonons, the same feature that is responsible for the high thermal conductivity. At higher optical fluence, we observed spontaneous electron-hole separation. Our results show BAs is an attractive optoelectronic material combining high thermal conductivity and excellent photocarrier transport properties. Finally, our study also demonstrates the capability of SUEM to probe photocarrier transport in emerging materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Are quantum materials economically and environmentally sustainable?

Quantum materials have revolutionized energy, information, and healthcare technologies, yet their development has largely prioritized performance over economic and environmental impacts—key factors for industrial adoption. Using topological materials as a case study, we present a data-driven framework that evaluates over 16,000 materials based on cost, supply chain resilience, energy demand, toxicity, and environmental footprint. By integrating the recently proposed quantum weight – a metric quantifying quantum behavior – we reveal a striking trend: materials with stronger quantum effects often exhibit higher environmental impact, posing challenges for scalability and industrial adoption. To address this, we identify a small set of materials that achieve a balance between quantum functionality and sustainability. Furthermore, our approach enables high-throughput, AI-driven materials discovery that incorporates economic and environmental influences from the outset, guiding the development of quantum materials for next-generation microelectronics and energy harvesting technologies.

AI↗
DOE OSTI2025

Epitaxial aluminum layer on antimonide heterostructures for exploring Josephson junction effects

In this study, we present results of our recent work of epitaxially-grown aluminum (epi-Al) on antimonide heterostructures, where the epi-Al thin film is grown at either room temperature or below zero °C. A sharp superconducting transition at T ∼ 1.3 K is observed in these epi-Al films. We further show that supercurrent states are realized in Josephson junctions fabricated in the epi-Al/antimonide heterostructures with mobility μ ∼ 1.0 × 10 6 cm 2 /Vs. These results clearly demonstrate we have achieved growing high-quality epi-Al/antimonide heterostructures, a promising platform for the exploration of Josephson junction effects for quantum information science and microelectronics applications.

Antimonide heterostructures↗
DOE OSTI2018

Survey of ab initio phonon thermal transport

The coupling of lattice dynamics and phonon transport methodologies with density functional theory has become a powerful tool for calculating lattice thermal conductivity (κ) with demonstrated quantitative accuracy and applicability to a wide range of materials. More importantly, these first-principles transport methods lack empirical tuning parameters so that reliable predictions of κ behaviors in new and old materials can be formulated. Since its inception nearly a decade ago, first-principles thermal transport has vastly expanded the range of materials examined, altered our physical intuition of phonon interactions and transport behaviors, provided deeper understanding of experiments, and accelerated the design of materials for targeted thermal functionalities. Such advances are critically important for developing novel thermal management materials and strategies as heat sets challenging operating limitations on engines, microelectronics, and batteries. Here, this article provides a comprehensive survey of first-principles Peierls-Boltzmann thermal transport as developed in the literature over the last decade, with particular focus on more recent advances. Lastly, this review will demonstrate the wide variety of calculations accessible to first-principles transport methods (including dimensionality, pressure, and defects), highlight unusual properties and predictions that have been made, and discuss some challenges and behaviors that lie beyond.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Facile integration of low-cost black phosphorus in solution-processed organic solar cells with improved fill factor and device efficiency

Black phosphorus (BP) as a promising two-dimensional (2D) material has gained great attention in nanoelectronic devices because of its intrinsic semiconductor characteristics. However, the poor material availability and solution processability have been major roadblocks that hinder its wider application in microelectronics. Herein, readily available, lost-cost BP was utilized as an effective component that was integrated via a facile solution process for the fabrication of bulk heterojunction organic solar cells (OSCs). An impressive fill factor (FF) of 74.2% and power conversion efficiency (PCE) of 10.5% were realized in the OSCs incorporating 10 wt% of BP in the active layer of the benchmark polymer donor PTB7-Th and PC71BM acceptor, corresponding to a 20% PCE enhancement compared to the BP-free binary devices. The efficiency enhancement can be attributed to BP's high hole carrier mobility that facilitates better carrier extraction and suppression of the recombination. BP has been further demonstrated to be effective in additional solar cells based on other photovoltaic (PV) materials, including non-fullerene OSCs. The successful incorporation of the inexpensive BP in the solution-based fabrication of OSCs opens the door for its application in high performance, low cost flexible electronics.

14 SOLAR ENERGY↗
DOE OSTI2023

Characterization of the polysilicon resistor in silicon strip sensors for ATLAS inner tracker as a function of temperature, pre- and post-irradiation

The high luminosity upgrade of the Large Hadron Collider, foreseen for 2029, requires the replacement of the ATLAS Inner Detector with a new all-silicon Inner Tracker (ITk). The expected ultimate total integrated luminosity of 4000 fb –1 means that the strip part of the ITk detector will be exposed to the total particle fluences and ionizing doses reaching the values of 1.6 · 10 15 1 MeV n eq /cm 2 and 0.66 MGy, respectively, including a safety factor of 1.5. Radiation hard n + -in-p micro-strip sensors were developed by the ATLAS ITk strip collaboration and are produced by Hamamatsu Photonics K.K. The active area of each ITk strip sensor is delimited by the n-implant bias ring, which is connected to each individual n + implant strip by a polysilicon bias resistor. The total resistance of the polysilicon bias resistor should be within a specified range to keep all the strips at the same potential, prevent the signal discharge through the grounded bias ring and avoid the readout noise increase. While the polysilicon is a ubiquitous semiconductor material, the fluence and temperature dependence of its resistance is not easily predictable, especially for the tracking detector with the operational temperature significantly below the values typical for commercial microelectronics. Dependence of the resistance of polysilicon bias resistor on the temperature, as well as on the total delivered fluence and ionizing dose, was studied on the specially-designed test structures called ATLAS Testchips, both before and after their irradiation by protons, neutrons, and gammas to the maximal expected fluence and ionizing dose. The resistance has an atypical negative temperature dependence. It is different from silicon, which shows that the grain boundary has a significant contribution to the resistance. Finally, we discuss the contributions by parameterizing the activation energy of the polysilicon resistance as a function of the temperature for unirradiated and irradiated ATLAS Testchips.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

An overview of HR-EBSD techniques for mapping local stress and dislocations in crystalline materials at sub-micron resolution

High resolution electron backscatter diffraction (HR-EBSD) is a technique used to map elastic strain, crystallographic orientation and dislocation density in a scanning electron microscope. Here, this review covers the background and mathematics of this technique, contextualizing it within the broader landscape of EBSD techniques and other materials characterization methods. Several case studies are presented showing the application of HR-EBSD to the study of plasticity in metals, failure analysis in microelectronics and defect quantification in thin films. This is intended to be a comprehensive resource for researchers developing this technique as well as an introduction to those wishing to apply it.

Ruggles, Timothy J. [Sandia National Laboratories ↗
DOE OSTI2024

Unraveling the multi-step crystallization mechanism of polytetrafluoroethylene, modified polytetrafluoroethylene, and their nanocomposites with boron nitride nanobarbs: Experimental insights and theoretical analysis

The non-isothermal crystallization behavior and kinetics of polytetrafluoroethylene (PTFE) composites with boron nitride nanobarb (BNNB), a new generation nanostructure with unique surface morphology and mechanical “barbs” have been analyzed, understanding these properties is essential for their high-end applications as thermal interface materials (TIM) for microwave, 5G and microelectronic devices. The analysis of the crystallization parameters includes crystallization onset, peak and end temperatures, crystallization half-life and overall crystallinity of PTFE, modified PTFE and their BNNB composites. The results were further analyzed using theoretical models such as the combined Avrami-Ozawa model. It was found that BNNB supports crystallization in the modified PTFE but shows minimal effect on the crystallization of PTFE. Due to the limitation of the classical theoretical models used above in fully characterizing the multi-step crystallization process of PTFE, an in-depth analysis using the model-free advanced isoconversional computation was used to characterize the PTFE crystallization based on the evolution of activation energy with fractional crystallinity and for the first time with temperature. Three kinetic regions were identified in the crystallization mechanism. Here, this study investigated the molecular organization and microstructural evolution of PTFE, modified PTFE and their composites during non-isothermal crystallization using advanced X-ray scattering measurements. An insight into the changes undergone by the material's microstructural units including crystallite size and morphology, lamellar thickness and lamellar interfacial layer thickness, and crystallographic phase dynamics during non-isothermal cooling from the melt, was provided here in this work. The effect of copolymer modification of PTFE and the inclusion of pristine and functionalized BNNB (a thermally conductive and electrically insulating ceramic) are both new investigations that provide valuable knowledge for the development of materials with strong matrix-nanofiller interaction and guidance for optimizing sintering and cooling cycles, two key steps in PTFE processing that largely affect the material microstructural features. Overall, the result of the three-part investigation demonstrates that BNNB supports crystallization in the modified PTFE up to 20 wt% concentration and at low and high cooling rates typically used in the industrial processing of PTFE.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Controlling shape memory effects in NiTi thin films grown on Ru seed layer

NiTi thin films with robust shape memory effects and low deposition temperatures are greatly desired for microelectronic devices. However, sub-micron films deposited below 425 °C usually have amorphous structure and must be post-annealed to achieve full crystallization. In this article, using Ru as a seed layer, we demonstrate growth of NiTi films as thin as 120 nm with in-situ crystallization at 325 °C. NiTi thin films with a wide range of growth parameters including deposition temperature and film thickness were investigated. Shape memory effects were characterized using stress bow and resistivity studies. Structural information across the R-phase to austenite transformation was obtained using X-ray diffraction. NiTi thin films exhibited a narrow hysteresis during R-phase to austenite phase transition near 60 °C while possessing good shape memory properties.

36 MATERIALS SCIENCE↗