Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “switch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Zero Voltage Switching AC-DC Converter Based on Zero State Modulation (ZSM)

In this paper, a half-bridge building block that can achieve soft switching across the complete operating range while operating under fixed frequency is proposed. In addition, dead-beat model predictive controls to control the same are also proposed. The proposed converter, referred to as zero-state modulated (ZSM) converter, uses a zero state, enabled by a small auxiliary switch, to achieve soft-switching. The approach allows lower switching loss, controlled dv/dt, small filter inductor, fixed frequency operation allowing interleaving to reduce filter capacitor. A single half-bridge building block can used to realize a ZVS DC-DC converter or multiple of these building blocks can be used to achieve soft switching 1-phase or 3-phase AC-DC converters.

Kandula, Prasad↗

A generalized approach for determining electric machine drive switching schemes using evolutionary optimization algorithms

The number of inverter switching events in one fundamental cycle of an electric machine can be limited by many factors such as inverter switching frequency, rotational speed, and computational time required by control algorithms. Even at low and moderate speeds, switching harmonics cause distortion in the phase current, which can lead to increased torque ripple and core losses when compared to operation with ideal waveforms. Furthermore, as rotational speed increases and voltage limitations are encountered, overmodulation schemes must be implemented to overcome increasing reactance and back-EMF (or pseudo back-EMF). The goal of this paper is to establish a framework and demonstrate methods for determining optimal switching times for a set number of switching events in a fundamental cycle using particle swarm optimization and multivariable fitness functions.

Burress, Timothy↗

Threshold Switching Characteristics of Nb/NbO 2 /TiN Vertical Devices

Nb/NbO2/TiN vertical structures were synthesized in-situ and patterned to devices with different contact areas. The devices exhibited threshold resistive switching with minimal hysteresis and a small EThreshold (60~90 kV/cm). The switching behavior was unipolar, and demonstrated good repeatability. A less sharp but still sizable change in the device resistance was observed up to 150 °C. It was found that the resistive switching without Nb capping layer exhibited the hysteretic behavior and much larger EThreshold (~250 kV/cm) likely due to a 2-3 nm surface Nb2O5 layer. The stable threshold switching behavior well above room temperature shows the potential applications of this device as an electronic switch.

Environmental Molecular Sciences Laboratory↗

Switching Dynamics in Vanadium Dioxide-Based Stochastic Thermal Neurons

We report on switching dynamics of individual and coupled vanadium dioxide (VO 2 ) devices subject to voltage pulses as the temperature is systematically varied from room temperature spanning the insulator–metal transition (IMT) temperature. The switching voltage of single devices has a strong relationship with both temperature and voltage pulsewidth. Two-step switching in connected VO 2 devices has been noted in current transient plots and was found to depend on temperature, pulsewidth, and pulse amplitude. Experimental switching behavior measured from VO 2 artificial neurons was implemented into a spiking neural network (SNN). During training, modulating the switching voltage via temperature affords a novel method to implement homeostasis with the coupled devices. Simulation results show the efficacy of the stochastic neuronal characteristics and the proposed homeostasis mechanism on a standard digit recognition task. As a result, these studies contribute to ongoing efforts in neuromorphic computing exploiting collective phase transitions.

42 ENGINEERING↗

A Hybrid Modulation Method for Single-Stage Soft-Switching Inverter Based on Series Resonant Converter

Pseudo-dc-link inverters are promising due to the single-stage configuration. The inverters can be isolated by high-frequency transformers, which also provide the freedom of step-up/down through winding turns ratio. Conventionally, a pseudo-dc-link inverter is based upon a pulsewidth modulation converter like flyback converter, but the accompanying switching losses can degrade efficiency and overall system performance. Alternatively, resonant converters (e.g., series resonant converter) seem to fit the need as they typically display soft-switching characteristics. However, the relevant research results are scarce because of two main reasons: high resonant current and limited soft-switching range. To overcome the difficulties, a hybrid modulation method is proposed in this article for a pseudo-dc-link inverter based on series resonant converter. In high-line region, the inverter operates with variable-frequency modulation, which leads to zero-voltage switching and relatively low-resonant current. In low-line region, the inverter operates with a short-pulse density modulation so that switching losses are greatly curtailed without excessive resonant current. The merits in both regions together contribute toward the high efficiency of the inverter. This article presents the operational principle of the proposed modulation as well as a comparison with other modulation methods. In addition, a 400 V-230 Vac, 2-kW prototype was built to verify the proposed modulation and the peak efficiency reaches 98.0%.

42 ENGINEERING↗

Switching it up: New mechanisms revealed in wurtzite-type ferroelectrics

Wurtzite-type ferroelectrics have drawn increasing attention due to the promise of better performance and integration than traditional oxide ferroelectrics with semiconductors such as Si, SiC, and III-V compounds. However, wurtzite-type ferroelectrics generally require enormous electric fields, approaching breakdown, to reverse their polarization. The underlying switching mechanism(s), especially for multinary compounds and alloys, remains elusive. Here, we examine the switching behaviors in Al 1-x Sc x N alloys and wurtzite-type multinary candidate compounds we recently computationally identified. We find that switching in these tetrahedrally coordinated materials proceeds via a variety of nonpolar intermediate structures and that switching barriers are dominated by the more-electronegative cations. For Al 1-x Sc x N alloys, we find that the switching pathway changes from a collective mechanism to a lower-barrier mechanism enabled by inversion of individual tetrahedra with increased Sc composition. Our findings provide insights for future engineering and realization of wurtzite-type materials and open a door to understanding domain motion.

36 MATERIALS SCIENCE↗

FLASH: FPGA-Accelerated Smart Switches with GCN Case Study

Some communication switches, e.g., the Mellanox SHArP and those in the IBM BlueGene clusters, are augmented to process packets at the application level with fixed-function collectives. This approach, however, lacks flexibility, which limits their applicability in diverse and dynamic workloads. Recently, a new type of programmable packet processor, which uses high-level languages, e.g., P4, has emerged as possible candidates. P4-based switches, however, fall short in certain applications, including machine learning, where capabilities not currently supported by P4 are needed. These include more complex calculation, such as sparse computation and fused multiply-accumulate, data-intensive floating point operations, data reuse, and significant memory. The problem addressed here is that such a switch augmentation needs to support: a large amount of state, significant flexible compute capability, and ease of programming, all while maintaining full functionality, including ensuring high throughput, and demonstrating utility. In this work, we propose a programmable look-aside-type accelerator that can be embedded into, or attached to, existing communication switch pipelines and that is capable of processing packets at line-rate. The proposed in-switch accelerator is based on mixing an ISA (subset of RISC-V instructions) with dataflow graphs (found in CGRAs). To augment performance, vector instructions are also supported. To facilitate usability, we have developed a complete toolchain to compile user-provided C/C++ codes to appropriate back-end instructions for configuring the accelerator. While this approach is flexible enough to support various workloads, in this paper, we consider Graph Convolutional Networks (GCNs) as a case study. Experimental results show that this approach considerably improves the performance of distributed GCN applications.

Haghi, Pouya↗

SmartFuse: Reconfigurable Smart Switches to Accelerate Fused Collectives in HPC Applications

Communication switches have sometimes been augmented to process collectives (e.g., the IBM BlueGene project and the Mellanox SHArP switch). In this work, we find that there is a great acceleration opportunity through the further augmentation of switches to accelerate more complex functions that combine communication with computation. We consider three types of such functions. The first is fully-fused collectives built by fusing multiple existing collectives like Allreduce with Alltoall. The second is semi-fused collectives built by combining a collective with another computation. The third we refer to as higher-order collectives built by combining multiple computations and communications, such as to perform matrix-matrix multiply (PGEMM). In this work, we propose a framework called SmartFuse to accelerate fused collective functions. The core of SmartFuse is a reconfigurable smart switch to support these operations. The semi/fully fused collectives are implemented with a CGRAlike architecture, while higher-order collectives are implemented with a more specialized computational unit that can also schedule communication. Supporting our framework is software to evaluate and translate relevant parts of the input program, compile them into a control data flow graph, and then map this graph to the switch hardware. The proposed framework, once deployed, has the strong potential to accelerate existing HPC applications transparently by encapsulation within an MPI implementation. Experimental results show that this approach improves the performance of the PGEMM kernel, MINIFE, and AMG by, on average, 94%, 15%, and 13%, respectively.

Haghi, Pouya↗

( Invited ) Ruggedness of SiC and GaN Power Transistors in Switching Based Tests

Currently, a spectrum of reliability tests are being performed by both device manufacturers and end users. Many of these qualification tests are operated within the device safe-operating-area (SOA), however, the devices often undergo dynamic events in many converter applications that can exceed the SOA boundaries. This paper presents our recent work on quantifying the out-of-SOA robustness of GaN power high-electron-mobility transistors (HEMTs) and SiC power MOSFETs by switching based tests. The unclamped inductive switching stresses are applied to p-gate GaN HEMTs to evaluate their surge-energy and overvoltage robustness. The continuous, hard-switching, turn-off stresses are applied to SiC MOSFETs to evaluate their overvoltage switching robustness. As a result, both experiments demonstrate the robustness of SiC and GaN devices under out-of-SOA switching events, and the physics of degradation and failure are understood.

42 ENGINEERING↗

Nanosecond photonic switch architectures demonstrated in an all-digital monolithic platform

We present an all-digital, fully programmable, nanosecond-scale photonic switch platform, monolithically integrating electronics for actuation, tuning, and power-monitoring alongside switching elements, resulting in a scalable, packageable solution for high-radix photonic switch fabrics. Furthermore by utilizing this platform, we achieve record loss and extinction performances comprising a 2x2 Mach Zehnder switch with 0.8 dB of loss and 28 dB extinction and a 2x2 nested Mach Zehnder switch with 1.3 dB of loss and 38 dB extinction.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A nanosecond-scale shift-and-dump Mach-Zehnder switch

We present a Mach-Zehnder-based optical switch with novel electro-optic shift-and-dump phase shifters that have no residual amplitude modulation. As a result, the switch can have a very high extinction ratio with no overhead in power dissipation and insertion loss compared to standard electro-optic Mach-Zehnder switches. We fabricate the switch in an all-digital silicon photonic platform that monolithically integrates the actuation and control electronics together with the photonics. The switch demonstrates an extinction ratio > 33 dB, insertion loss < 1.2 dB, and nanosecond-scale transients.

42 ENGINEERING↗

A Survey of Recent Advances in Transmission Network Switching

Optimal Transmission Switching for electric power networks is a research topic of great interest for both researchers and electric power engineers. Transmission switching is commonly considered a corrective mechanism tool for overloaded networks; however in recent years it has been sought as a means to reduce power loss in the network. Ultimately the objective of this analysis is to provide smart tools for power and economic dispatch planning, allowing utilities and engineers to utilize existing infrastructure as a means of automatic control. The optimization problem is a complex multi-objective search including criteria such as system power loss, equality/non-equality constraints, islanding management, and radial topology configuration in the case of distribution networks. Many optimization methods have been adopted for the transmission switching problem in past years using various heuristic search algorithms. The scope of methodology extends from tried and true methods such as simulated annealing to more modern methods like neural network optimization. Solution benchmarks under consideration commonly include solution state accuracy, computational burden and solution time. The objective of this presentation is to provide a comprehensive account of development in transmission switching methodologies. Benchmarking and testing strategies will be discussed as well as application of the Transmission Expansion Planning Tool in finding transmission switching solutions. Limited Discrepancy Search (LOS) and Probe Discrepancy Search (PDS) Algorithms are compared with more classic optimization strategies, as seen in defining literature and publications in this research field.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A Soft-Switching Inverter for High-Temperature Advanced Hybrid Electric Vehicle Traction Motor Drives

The state-of-the-art hybrid electric vehicles (HEVs) require the inverter cooling system to have a separate loop to avoid power semiconductor junction over temperatures because the engine coolant temperature of 105°C does not allow for much temperature rise in silicon devices. The proposed work is to develop an advanced soft-switching inverter that will eliminate the device switching loss and cut down the power loss so that the inverter can operate at high-temperature conditions while operating at high switching frequencies with small current ripple in low inductance based permanent magnet motors. The proposed tasks also include high-temperature packaging and thermal modeling and simulation to ensure the packaged module can operate at the desired temperature. The developed module will be integrated with the motor and vehicle controller for dynamometer and in-vehicle testing to prove its superiority. This report will describe the detailed technical design of the soft-switching inverters and their test results. The experiments were conducted both in module level for the module conduction and switching characteristics and in inverter level for its efficiency under inductive and dynamometer load conditions. The performance will be compared with the DOE original specification.

33 ADVANCED PROPULSION SYSTEMS↗

Integration of Ultrawide Bandgap Photoconducting Semiconductor Switches into High-Voltage, High-Current Pulser Systems

In this feasibility study we will evaluate the viability of integrating ultrawide bandgap (UWBG) photoconducting semiconductor switches (PCSS) in high-voltage pulser systems capable of driving low-impedance dynamic loads critical for next-generation accelerator and RF-source applications. The project consisted of developing modelling tools that would inform design of UWBG PCSS packages that could be mounted onto conventional circuit boards. Specifically, we are interested in evaluating the following through simulation software: (1) resistance to electrical breakdown (2) proximity effects due to high-frequency skin effect (3) transient behavior from switching (4) effective transmission of RF signals (5) thermal dynamics of the switch under operation (6) sensitivity to inhomogeneities in optical excitation of the material (7) cross-talk effects from parallel switching structures, and (8) susceptibility of system to damaged components. The project resulted in the development of a special-purpose circuit code that implements photoconductivity physics. This code was used to evaluate objectives 1-6 above, identifying a critical requirement associated with the need for fine control of dopant concentrations in the UWBG material to reach an optimal solution for voltage standoff and laser light responsivity requirements. In addition, we identified that the temperature dependence of the electrical conductivity of this material was typically not well-measured and developed a platform for measuring both the “dark” and “illuminated” conductivity on real physical switches in the lab to better inform our models.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Switch leakage mitigation through differential cancellation

High speed analog-to-digital converters (ADC), switched-capacitor delay elements, and pulsed radio frequency (RF) systems all require switches in the signal path operating at high switching speeds, providing low resistance when enabled, and providing high signal isolation when disabled. In semiconductor technologies such as CMOS, the enabled state resistance directly scales with the sizing of the switch device, where a larger width switch provides a lower enabled state resistance. As the device width is increased, so is the capacitance formed between the gate, drain, and source of the device.

42 ENGINEERING↗

Stabilization of Switched Systems on Non Uniform Time Domain with Dwell Time

In this paper, we will present new stability conditions for a special class of linear switched systems, that evolves on non-uniform time domain. The considered systems switches between continuous-time subsystems on intervals with variable lengths and discrete-time subsystems with variable step sizes. Time scale theory is introduced to derive conditions for exponential stability of this special class of switched systems by using the dwell time approach. The conditions are based on the existence of a Lyapunov function which is non-increasing at the switching instants. This shown that this class of switched systems can be stabilized if the dwell time of each continuous-time subsystem is greater than some bound, and if the gap of the discrete-time subsystem is bounded by some specific values. Numerical examples are presented to show the effectiveness of the proposed scheme.

Taousser, Fatima Zohra↗

Exciter switch

A new exciter switch assembly has been installed at the three DSN 64-m deep space stations. This assembly provides for switching Block III and Block IV exciters to either the high-power or 20-kW transmitters in either dual-carrier or single-carrier mode. In the dual-carrier mode, it provides for balancing the two drive signals from a single control panel located in the transmitter local control and remote control consoles. In addition to the improved switching capabilities, extensive monitoring of both the exciter switch assembly and Transmitter Subsystem is provided by the exciter switch monitor and display assemblies.

Mcpeak, W. L.↗

The dc-to-dc converters employing staggered-phase power switches with two-loop control

A switched inductor voltage is coupled to a sense winding in each phase, and all sense windings are connected in series to one of two feedback loops to provide a signal that indicates when one of the power switches is on as the principal determinant of switching instants. A sequencer is triggered each time a pulse generator is triggered to turn on a different power switch in sequence at each switching instant.

Wester, G. W.↗