Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “radioactive decay data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

A new algorithm for estimating radioxenon concentrations

A new algorithm (Xcounts) is introduced for estimating the activity concentrations of the xenon isotopes 131m Xe, 133m Xe, 133 Xe, and 135 Xe using beta-gamma coincidence data. The algorithm simultaneously estimates the decay counts associated with the four xenon isotopes, background, and radon in contrast to the net-counts method that uses sequential residual removal to account for background and interreferences. Calibration data for background counts are determined from gas-background measurements and simulation. In Xcounts, the false positive count rates for 131m Xe and 133m Xe are lower than the false positive rates for 133 Xe and 135 Xe. This algorithm appears to reliably detect the metastable isotopes at lower activity levels than the net-counts method and have similar performance for the other isotopes.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Photoneutron cross sections for {sup 96}Zr: A systematic experimental study of photoneutron and radiative neutron capture cross sections for zirconium isotopes

Photoneutron cross sections were measured for {sup 96}Zr near neutron threshold with quasimonochromatic laser-Compton-scattering {gamma}-ray beams. A systematic analysis of photoneutron and radiative neutron capture data for zirconium isotopes within the statistical model calculation leads to a unified picture of low-energy {gamma}-ray strengths for zirconium isotopes that is described by the HFB + QRPA model of E1 strength supplemented with an extra {gamma} strength attributed to a giant M1 resonance. Results of the systematic analysis including radiative neutron capture cross sections for radioactive {sup 95}Zr and {sup 93}Zr nuclei are presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

ARIES Blend Lot Book Data Analysis

The Advanced Recovery Integrated Extraction System (ARIES) Program being executed at Los Alamos TA-55 produces unpolished plutonium oxide powder from pit disassembly in batches of material referred to as a blend lot. Each blend lot is sampled and analyzed by Los Alamos group C-AAC (Chemistry Division, Actinide Analytical Chemistry Group) for radioactive and nonradioactive constituents contained in the material. A blend lot, which nominally consists of 12 kg(Pu), is then packaged into three DOE-STD-3013 containers that are analyzed by nondestructive analysis (NDA) to determine the fraction and total amount of plutonium mass relative to impure plutonium oxide. The analytical and NDA data are presented in a Blend Lot Book (BLB). The data are used to confirm that a blend lot grouping of three cans meets the requirements for off-site shipment specified in the formal interface control document (ICD). The analytical and NDA data from 49 blend lots were reviewed to provide summary-level information on the constituents present in the blend lots. The results provide an overall perspective in historical amounts for constituent averages over all blend lots and similar information in the variation between constituent levels. Note that to properly compare the can contents, it would be most appropriate to decay all of cans’ constituents to a particular date. Previously, this analysis only examined statistical data as determined at the time of blend lot chemical analysis. The chemical analysis dates span the period from June 2011 to May 2015 (4 years), which is 28% of one Pu-241 half-life. Therefore, the approximate nature of the aggregate information must be properly understood in this light. However, to address this issue, a new table is included in this revision that decays the 48 blend lots to a single date.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methane emissions from MBT landfills

Highlights: • Compilation of methane generation potential of mechanical biological treated (MBT) municipal solid waste. • Impacts and kinetics of landfill gas production of MBT landfills, approach with differentiated half-lives. • Methane oxidation in the waste itself and in soil covers. • Estimation of methane emissions from MBT landfills in Germany. - Abstract: Within the scope of an investigation for the German Federal Environment Agency (“Umweltbundesamt”), the basics for the estimation of the methane emissions from the landfilling of mechanically and biologically treated waste (MBT) were developed. For this purpose, topical research including monitoring results regarding the gas balance at MBT landfills was evaluated. For waste treated to the required German standards, a methane formation potential of approximately 18–24 m{sup 3} CH{sub 4}/t of total dry solids may be expected. Monitoring results from MBT landfills show that a three-phase model with differentiated half-lives describes the degradation kinetics in the best way. This is due to the fact that during the first years of disposal, the anaerobic degradation processes still proceed relatively intensively. In addition in the long term (decades), a residual gas production at a low level is still to be expected. Most of the soils used in recultivation layer systems at German landfills show a relatively high methane oxidation capacity up to 5 l CH{sub 4}/(m{sup 2} h). However, measurements at MBT disposal sites indicate that the majority of the landfill gas (in particular at non-covered areas), leaves the landfill body via preferred gas emission zones (hot spots) without significant methane oxidation. Therefore, rather low methane oxidation factors are recommended for open and temporarily covered MBT landfills. Higher methane oxidation rates can be achieved when the soil/recultivation layer is adequately designed and operated. Based on the elaborated default values, the First Order Decay (FOD) model of the IPCC Guidelines for National Greenhouse Gas Inventories, 2006, was used to estimate the methane emissions from MBT landfills. Due to the calculation made by the authors emissions in the range of 60,000–135,000 t CO{sub 2-eq.}/a for all German MBT landfills can be expected. This wide range shows the uncertainties when the here used procedure and the limited available data are applied. It is therefore necessary to generate more data in the future in order to calculate more precise methane emission rates from MBT landfills. This is important for the overall calculation of the climate gas production in Germany which is required once a year by the German Government.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Proton and neutron contributions to the quadrupole transition strengths in 39 Ca and 39 K studied by lifetime measurements of mirror transitions

The E2 transition matrix elements of isobaric multiplets are expected to follow a linear trend as a function of isospin projection. However, measurements of the 2 + → 0 + transitions in the A = 38 triplet of Ca, K, and Ar show a deviation from this trend with an enhanced transition strength in 38 Ca with respect to its mirror 38 Ar. We have studied analogue 11/2 – → 7/2 – E2 transitions in 39 Ca and its mirror partner 39 K to determine if this enhancement persists in neighboring Ca isotopes. Recoil-distance lifetime measurements of 39 Ca and 39 K were performed utilizing a 42 Sc secondary beam, the TRIPLEX plunger, the GRETINA array, and the S800 spectrograph. Our data provide a lifetime measurement of the (11/2 – ) state in 39 Ca as well as an improved lifetime result for the (9/2 – ) state, while the 39 K data are used to validate the present analysis. Furthermore, a comparison of the present data to shell-model calculations suggests an enhanced transition strength in 39 Ca, pointing to both proton and neutron contributions to core excitations across the Z = N = 20 shell gaps in close proximity to 40 Ca.

39 ≤ A ≤ 58↗

Effect of annealing treatment on K{beta}-to-K{alpha} x-ray intensity ratios of 3d transition-metal alloys

The influence of heat annealing treatment on the K{beta}-to-K{alpha} x-ray intensity ratios of 3d transition metal was carried out by x-ray fluorescence studies of various alloy compositions. K{beta}-to-K{alpha} x-ray intensity ratios of Fe, Ni, Ti, Co, and Cu in Fe{sub x}Ni{sub 1-x}, Ti{sub x}Ni{sub 1-x}, and Co{sub x}Cu{sub 1-x} alloys unannealed and thermally annealed at different temperatures have been measured following excitation by 22.69-keV x rays from a 10-mCi {sup 109}Cd radioactive point source. The experimental data obtained after annealing treatment indicate deviations of K{beta}-to-K{alpha} x-ray intensity ratios for 3d transition metals in different alloy compositions from the corresponding ratios for unannealed samples. The present investigation makes it possible to perform reliable interpretation of experimental K{beta}-to-K{alpha} x-ray intensity ratios for various 3d transition metals in their alloys and can also provide quantitative information about the changes of the K{beta}-to-K{alpha} x-ray intensity ratios of these metals with annealing treatment in considered systems.

36 MATERIALS SCIENCE↗

International Collaboration Activities on Engineered Barrier Systems

The Spent Fuel Waste Science and Technology (SFWST) campaign from the DOE Fuel Cycle and Technology (FCT) program has been engaging in international collaborations between repository R&D programs for nuclear waste disposal to leverage on the extensive research investigations and laboratory/field data of engineered barrier system (EBS) components (e.g., near-field) and characterization of transport phenomena in the host rock (e.g., far-field) processes from state-of-the-art underground research laboratories (URL) experiments. Thermal heating from radionuclide decay in the waste canisters will generate increases in temperature that will drive chemical and transport processes in the near- and far-field domains of the repository. URL sites provide the ideal setting to conduct heater test experiments to simulate the thermal effects of heat-generating nuclear waste in disposal galleries and surrounding host rock.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Radioactivity and thermalization in the ejecta of compact object mergers and their impact on kilonova light curves

One promising electromagnetic signature of compact object mergers are kilonovae: approximately isotropic radioactively powered transients that peak days to weeks post-merger. Key uncertainties in kilonova modeling include the emission profiles of the radioactive decay products—non-thermal β-particles, α-particles, fission fragments, and γ-rays—and the efficiency with which their kinetic energy is absorbed by the ejecta. The radioactive energy emitted, along with its thermalization efficiency, sets the luminosity budget and is therefore crucial for predicting kilonova light curves. We outline uncertainties in the radioactivity, describe the processes by which the decay products transfer energy to the ejecta, and calculate time-dependent thermalization efficiencies for each particle type. We determine the net thermalization efficiency and explore its dependence on r-process yields—in particular, the production of α-decaying translead nuclei—and on ejecta mass, velocity, and magnetic fields. We incorporate our results into detailed radiation transport simulations, and calculate updated kilonova light curve predictions. Thermalization effects reduce kilonova luminosities by a factor of roughly 2 at peak, and by an order of magnitude at later times (15 days or more after explosion). We present analytic fits to time-dependent thermalization efficiencies, which can be used to improve light curve models. We revisit the putative kilonova that accompanied gamma-ray burst 130603B, and estimate the mass ejected in that event. We find later time kilonova light curves can be significantly impacted by α-decay from translead isotopes; data at these times may therefore be diagnostic of ejecta abundances.

79 ASTRONOMY AND ASTROPHYSICS↗

IRON-60 HETEROGENEITY AND INCOMPLETE ISOTOPE MIXING IN THE EARLY SOLAR SYSTEM

Short-lived radionuclides (e.g., {sup 26}Al, {sup 53}Mn, {sup 60}Fe, {sup 182}Hf) are widely used to refine the chronology of the early solar system. They provide chronological information, however, only if they were homogeneously distributed in the source region of the objects under scrutiny at the time of their formation. With the high level of precision now achieved on isotopic measurements, very short time intervals can in principle be resolved and a precise evaluation of the initial homogeneity degree becomes increasingly crucial. High-precision nickel isotope data for differentiated meteorites (angrites, ureilites) and chondritic (CB) components allow us to test the initial distribution of radioactive {sup 60}Fe and stable Ni isotopes. Although these meteorites appear to have formed nearly contemporaneously, they yield variable initial {sup 60}Fe/{sup 56}Fe ratios. Besides, the CB metal nodules and ureilite silicates show nucleosynthetic anomalies. The new data presented here do not confirm the recently inferred late injection of {sup 60}Fe into the protoplanetary disk. Instead, live {sup 60}Fe was present, but heterogeneously distributed, from the start of the solar system, revealing an incomplete mixing of material from various nucleosynthetic sources and restricting the use of the {sup 60}Fe-{sup 60}Ni system as a chronometer.

79 ASTRONOMY AND ASTROPHYSICS↗

Measurement of the {sup 241}Am({gamma},n){sup 240}Am reaction in the giant dipole resonance region

The photodisintegration cross section of the radioactive nucleus {sup 241}Am has been obtained using activation techniques and monoenergetic {gamma}-ray beams from the HI{gamma}S facility. The induced activity of {sup 240}Am produced via the {sup 241}Am({gamma},n) reaction was measured in the energy interval from 9 to 16 MeV utilizing high-resolution {gamma}-ray spectroscopy. The experimental data for the {sup 241}Am({gamma},n) reaction in the giant dipole resonance energy region are compared with statistical nuclear-model calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Monte Carlo Simulation of Influence of Input Parameters Uncertainty on Output Data

Input parameters of a complex system in the probabilistic simulation are treated by means of probability density function (PDF). The result of the simulation have also probabilistic character. Monte Carlo simulation is widely used to obtain predictions concerning the probability of the risk. The Monte Carlo method was performed to calculate histograms of PDF for release rate given by uncertainty in distribution coefficient of radionuclides {sup 135}Cs and {sup 235}U.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Validation of Gamma Dose Rate Calculation Methodology using the Morris and Turkey Point Measurements

The ability to accurately predict the dose rates from the spent nuclear fuel assembly is very important for determining whether the used nuclear fuel is self-guarded and self-protected. Studies have shown that the direct numerical calculations of the dose rates gave a much lower value than a typical reference. This report summarizes the benchmark studies performed to evaluate the numerical methodologies used in calculating the gamma dose rates of the spent nuclear fuel assemblies. The Morris and Turkey Point experimental data for dose rates measured through air were used in the analyses. Numerical simulations of the gamma dose rate measurements included the fuel depletion analysis of the fuel assembly as well as its structural materials irradiated inside the reactor core, the radioisotopes decay, and photon transport simulations to calculate the gamma dose rates. The different factors which affect the calculated gamma dose rates were addressed. The calculated results were compared with the measured gamma dose rates. Good agreement was obtained when the detectors were placed at the middle of the fuel assembly region. The deviations of the calculated dose rates became larger when the measurements were performed at the top or bottom fuel assemblies. In these benchmark studies, the spent nuclear fuel assemblies were all PWR assemblies and had fuel burnup around 25 MWd/kg to 40 MWd/kg. Its cooling time before the measurements was around 1.8 years to 7 years. The used nuclear fuel assembly is usually self-protected while discharged from the core. Its radioactivity decreases and after a few tens of years it may fall down below the current threshold of 100 r/h. Future validation work is necessary in order to better evaluate the numerically calculated gamma dose rates with experiments performed for other types of fuel assemblies and for fuel assemblies with higher burnup and/or longer cooling times.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Intrinsic Radiation Source Generation with the ISC Package: Data Comparisons and Benchmarking

The characterization of radioactive emissions from unstable isotopes (intrinsic radiation) is necessary for shielding and radiological-dose calculations from radioactive materials. While most radiation transport codes, e.g., MCNP [X-5 Monte Carlo Team, 2003], provide the capability to input user prescribed source definitions, such as radioactive emissions, they do not provide the capability to calculate the correct radioactive-source definition given the material compositions. Special modifications to MCNP have been developed in the past to allow the user to specify an intrinsic source, but these modification have not been implemented into the primary source base [Estes et al., 1988]. To facilitate the description of the intrinsic radiation source from a material with a specific composition, the Intrinsic Source Constructor library (LIBISC) and MCNP Intrinsic Source Constructor (MISC) utility have been written. The combination of LIBISC and MISC will be herein referred to as the ISC package. LIBISC is a statically linkable C++ library that provides the necessary functionality to construct the intrinsic-radiation source generated by a material. Furthermore, LIBISC provides the ability use different particle-emission databases, radioactive-decay databases, and natural-abundance databases allowing the user flexibility in the specification of the source, if one database is preferred over others. LIBISC also provides functionality for aging materials and producing a thick-target bremsstrahlung photon source approximation from the electron emissions. The MISC utility links to LIBISC and facilitates the description of intrinsic-radiation sources into a format directly usable with the MCNP transport code. Through a series of input keywords and arguments the MISC user can specify the material, age the material if desired, and produce a source description of the radioactive emissions from the material in an MCNP readable format. Further details of using the MISC utility can be obtained from the user guide [Solomon, 2012]. The remainder of this report presents a discussion of the databases available to LIBISC and MISC, a discussion of the models employed by LIBISC, a comparison of the thick-target bremsstrahlung model employed, a benchmark comparison to plutonium and depleted-uranium spheres, and a comparison of the available particle-emission databases.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Reaction dynamics for the system {sup 17}F+{sup 58}Ni at near-barrier energies

Charged reaction products originated from the interaction of the loosely bound radioactive ion beam {sup 17}F (S{sub p}=600 keV) with the proton-shell closed {sup 58}Ni target were measured at two colliding energies slightly above the Coulomb barrier. The collected data were analyzed within the framework of the optical model to deduce the reaction cross section and to investigate the role played by inelastic excitations, transfer channels, and the breakup process {sup 17}F{yields}{sup 16}O+p at near-barrier energies. The reaction cross section at the lower {sup 17}F energy showed a moderate enhancement ({approx}20%) with respect to that of the system {sup 16}O+{sup 58}Ni. At this energy direct reaction channels were also found to be more relevant than those for the reaction induced from the tightly bound projectile {sup 16}O on the same target. Both features could be strongly related to the very low binding energy of the {sup 17}F valence proton.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Neutron-Rich {sup 62,64,64}Fe Show Enhanced Collectivity: The Washout of N = 40 in Terms of Experiment, Valence Proton Symmetry and Shell Model

Probing shell structure at a large neutron excess has been of particular interest in recent times. Neutron-rich nuclei between the proton shell closures Z = 20 and Z = 28 offer an exotic testing ground for shell evolution. The development of the N = 40gap between neutron fp and lg{sub 9/2} shells gives rise to highly interesting variations of collectivity for nuclei in this region. While {sup 68}Ni shows doubly magic properties in level energies and transition strengths, this was not observed in neighbouring nuclei. Especially neutron-rich Fe isotopes proved particularly resistant to calculational approaches using the canonical valence space (fpg) resulting in important deviations of the predicted collectivity. Only an inclusion of the d{sub 5/2}-orbital could solve the problem [1]. Hitherto no transition strengths for {sup 66}Fe have been reported. We determined B(E2,2{sup +}{sub 1}{yields}0{sup +}{sub 1}) values from lifetimes measured with the recoil distance Doppler-shift method using the Cologne plunger for radioactive beams at National Superconducting Cyclotron Laboratory at Michigan State University. Excited states were populated by projectile Coulomb excitation for {sup 62,64,66}Fe. The data show a rise in collectivity for Fe isotopes towards N = 40. Results [2] are interpreted by means of a modified version of the Valence Proton Symmetry [3] and compared to shell model calculations using a new effective interaction recently developed for the fpgd valence space [4].

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Symmetric and asymmetric fission modes in proton-induced fission at 660 MeV of {sup 238}U

Fission product cross sections of intermediate-energy fission of {sup 238}U were used in order to construct the charge and mass yield distributions. Enriched target of {sup 238}U was irradiated by proton beam with energy 660 MeV for several hours at the LNP Phasotron, Joint Institute for Nuclear Research (JINR), Dubna, Russia. The charge distribution of the fission fragments was analyzed for calculation of isobaric cross sections. The mass yield curves were expanded into symmetric and asymmetric components according multimodal fission approach. The fissility values of actinides were calculated at given proton energy. The obtained results have been compared to the same data for targets {sup 237}Np and {sup 241}Am.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Investigating the Effect of Sorbed Humic Acid on the Mobility of Uranium - 19461

The Savannah River Site (SRS) was one of the major nuclear facilities for the U.S Department of Energy. During the Cold War, these facilities produced large amounts of radioactive and hazardous waste. On site, the F-Area consisted of three unlined seepage basins that collected approximately 6.8 billion liters of low-level waste that contained nitric acid, radionuclides, and dissolved metals due to plutonium separation operations. Sufficient quantities of uranium isotopes, I-129, Tc-99, and tritium migrated into the groundwater, creating an acidic plume with a pH between 3 and 5.5. Although the basins functioned as designed, the acidic nature of the waste created a source of contamination for the groundwater and soil below the basins. With radionuclides above their maximum contaminant level (MCL) remediation efforts took place. Humic acid as a remediation technology has shown potential for controlling radionuclide mobility. Humic acid is a fraction of humic substance that are ubiquitous in the environment. Humic substances (HS) are complex heterogeneous mixtures of polydispersed materials formed by biochemical and chemical reactions during the decay and transformation of plant and microbial remains. Humic substances account for 50-80% of the organic carbon in the soil or sediment and are known for their excellent binding capacity for metals. Humic acid can be extracted with a potassium hydroxide base solution and then drying it. The high pH solubilizes the humic acid molecules and generates a dark-brown highly-concentrated solution, rich in humic acid, which can be diluted for use. Humic acid's strong sorption capacity and its ability to develop a bond with uranium at slightly acid pH constitute it as remediation technology to reduce uranium (VI) mobility. Column experiments were performed to identify the sorption and desorption of HS in flow-through porous media representative of the acidic aquifer at the F-Area Seepage Basins. Two commercially available HA were selected for comparison, Huma-K and KW15 modified humics (modified humic acid, mod-HA). By conducting a nonreactive rhenium tracer test, on columns filled with soil obtained from SRS's FAW-1 at a depth interval of 18 m -21 m, column parameters such as pore volume (PV), variance, dispersion and peclet number were determined. Columns were then used to estimate the influence of HA on uranium mobility. Data obtained from this study shows that using HA as an amendment for uranium remediation improves uranium removal significantly. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Surprising Charge-Radius Kink in the Sc Isotopes at N = 20

For this work, charge radii of neutron deficient 40 Sc and 41 Sc nuclei were determined using collinear laser spectroscopy. With the new data, the chain of Sc charge radii extends below the neutron magic number N=20 and shows a pronounced kink, generally taken as a signature of a shell closure, but one notably absent in the neighboring Ca, K, and Ar isotopic chains. Theoretical models that explain the trend at N=20 for the Ca isotopes cannot reproduce this puzzling behavior.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗