Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Atlanta”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Passivation‐Induced Species Dynamics and Microstructural Evolution in Solid‐State Lithium–Sulfur Cathodes

Solid-state lithium–sulfur (SSLS) batteries offer high theoretical energy density, yet their practical viability is hindered by poor sulfur utilization and limited rechargeability. At the core of this challenge lies the passivating nature of Li 2 S, which restricts ionic and electronic transport, suppresses interfacial activity, and severely impedes the reversibility of electrochemical reactions. In this study, we elucidate the mechanistic origins of these limitations by resolving how charge and discharge species form, grow, and spatially evolve within the cathode microstructure under varied current densities and electrode compositions. By resolving the species distribution at the particle scale and coupling it with Raman spectroscopy and X-ray diffraction, we demonstrate how Li 2 S formation induces localized surface passivation that progressively limits electrochemical accessibility within the cathode microstructure. Sulfur utilization is found to be strongly governed by the interplay between sulfur loading, residual porosity, and interfacial architecture. High sulfur contents result in buried, electrochemically isolated domains due to poor solid electrolyte (SE) percolation, while low sulfur contents trigger SE degradation via parasitic reactions. The resulting sulfur-porosity maps delineate the mechanistic boundaries between reversible and transport-limited regimes, offering actionable design guidance for SSLS cathodes with enhanced sulfur utilization.

electrode microstructure↗
DOE OSTI2025

In Situ Electrochemistry of Buried Interfaces in Metal Halide Perovskites: Probing Energy Bands, Halide Redox Activity, and Kinetics

Control over charge injection and extraction processes across buried interfaces is fundamental for all (opto)electronic multilayer device platforms, necessitating detailed understanding of local structural and chemical differences that promote defect formation, distort energetic band-edge alignments, and alter charge transport processes. Herein, the implementation of a low-cost electroanalytical methodologies’ tool suite is described to quantitatively characterize buried interfaces and redox reactions in printable, mixed electrical–ionic, and redox-active metal halide perovskites and a prototypical hole-transporting nickel oxide (NiO x ) thin film. The objective is to demonstrate the power of electrochemical methodologies to improve the nanoscale understanding of complex interfaces within optoelectronic devices by providing case studies on how to: i) differentiate between electronic and chemical properties in NiO x contacts; ii) measure changes in reversibility of halide redox reactions via NiO x surface states; iii) assess energy alignment and charge transport across (modified) buried interfaces; and iv) quantify defects at buried interfaces that change with modifiers and differences in perovskite processing, including increasing defect concentrations when films are slot-die-coated versus spin-cast. The collective approach addresses major challenges in understanding the precise energy landscape and interface reactivity under relevant electric fields that mimic operando conditions (away from equilibrium) and across length scales in thin film device formats.

(spectro)electrochemistry↗
DOE OSTI2025

Thorium Bis‐Salophen Trimers as Anion Detectors and Binding Agents

Bis‐salophen ligands are the condensation product of a tetramine and a salicylaldehyde derivative. They feature two binding sites, both of which are tetradentate with mixed O/N donor atoms. Reaction with the ligand precursor and thorium nitrate tetrahydrate forms a 3:3 metal‐to‐ligand trimer with a ΔΔΔ‐chirality confirmed by X‐ray crystallography of a racemic single crystal. The structure has a pore in the center of the triangular structure measuring 6.22 Å at its narrowest point. This compound is air‐ and water‐stable as well as soluble in organic solvents. Here, this compound was screened with a series of tetrabutyl ammonium halide salts, and tetrabutylammonium (TBA) chloride showed the strongest binding to the complex. After the addition of 2 equivalents of TBACl, the complex and salt precipitate out of solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Extrusion‐Spheronization of Mock Energetic Materials

The primary method for producing plastic bonded explosive (PBX) granules, or “prills”, has remained relatively unchanged for 70 years despite the complex nature of the process. In this work, we demonstrate the feasibility of using an extrusion‐spheronization technique to produce prills for PBX applications. We begin by detailing an inert formulation with similar properties of PBXs and then demonstrate the extrusion‐spheronization processing of these materials. A study is then performed where the spheronization process time of the extruded materials is varied and the resultant prills are morphologically characterized. Further, these prills are then pressed into high‐density articles and subject to compression testing to elucidate trends in process, properties, and performance. It was found that, for our formulation (95 wt.% melamine/5 wt.% polymer binder) and process, a spheronization time of 60 s yielded relatively uniform particles that exhibited improved poured, tapped, and pressed densities. Mechanical strength did not have a strong trend with process time as all spheronized materials had similar peak compression stress at failure. After further optimization, extrusion‐spheronization may be a promising path for future PBX formulation.

extrusion spheronization↗
DOE OSTI2025

Deriving Stable Peak Models to Fit Complex XPS Data From Cu Contaminated Pt Electrocatalysts

X-ray Photoelectron Spectroscopy spectra peak models, designed to partition photoemission signals emanating from different elements or chemical states within an atom, are fitted to data limited to an energy interval over which inelastically scattered photoemission signal can be estimated. While the choice of background approximation and line shapes of components to the peak model requires careful consideration, the energy interval used to define the data to which the peak model is optimized has a significant impact on the final peak model. The relationship between the background intensity and data intensity at the start and end of the energy interval dictates the line shapes used in the peak model. In this work, we devise a method to peak fit a complex overlapping Cu 3p and Pt 4f XPS peak structure to perform the elemental quantification. We first use an Al 2s peak to illustrate how background curves approach data at the limits of the energy interval over which the background is defined, influencing the analysis of XPS spectra. Next, we demonstrate the nature of interactions between specific line shapes (Voigt and pseudo-Voigt profiles) suitable for photoemission peaks and a specific background curve (Shirley) and a peak model is presented that includes components to the peak model that accommodates background intensity during fitting of the peak model to data. The peak model allowed for quantification of the contributions of Pt 4f peaks emanating from the substrate that exhibits strong asymmetry in the presence of the inhomogeneously distributed Cu species, mostly of Lorentzian character.

XPS↗
DOE OSTI2026

A New Platform for Twistronics: Perovskite Moiré Superlattices Beyond van der Waals

Moiré superlattices have reshaped condensed‐matter physics by enabling twist‐angle engineering of electronic and excitonic states, traditionally in van der Waals (vdW) systems. This Perspective focuses on perovskites as a transformative non‐van der Waals (non‐vdW) platform for twistronics. These materials are distinguished by ionic‐covalent bonding and soft octahedral lattices that support deep moiré potentials (≈100–200 meV), which in turn yield bright, room‐temperature excitons and tunable quantum phenomena. We organize recent advances into two core classes: (i) moiré superlattices constructed from 2D Ruddlesden‐Popper (RP) perovskites via spontaneous or guided twisted stacking; and (ii) moiré architectures in 3D perovskite lamellae, achieved through topotactic 2D RP‐to‐3D conversion and ligand‐induced self‐assembly. Key experimental observations in these systems include twist‐tunable moiré periods, suppressed exciton–exciton annihilation, flat band‐like transport, and ferroelectric vortex lattices in their oxide perovskite counterparts. Here, we outline key bottlenecks, including defects arising during phase conversion, stringent lattice‐matching requirements, and the absence of in situ twist metrology, and highlight opportunities in lattice‐mismatched heterostructures and multifunctional quantum‐optoelectronic devices. Collectively, these advances establish perovskite moiré systems as a critical bridge between fundamental moiré physics and room‐temperature technological applications.

2D Ruddlesden–Popper perovskites↗
DOE OSTI2025

Quantifying uncertainty in uranium concentration measurements via K-edge densitometry

This study quantifies the uncertainty in uranium concentration predictions of fluoride and chloride-based salts within a steel pipe using K-edge densitometry. Modeling and simulation was conducted with the Monte Carlo N-Particle Transport (MCNP) code. The quality of of this technique’s prediction in a pipe requires proper characterization of the pipe’s thickness, which is dependent on the source size and axial offset from the pipe centerline. The thickness was determined as either the center-line thickness seen by the X-ray source or an average value determined through random sampling. Generally, the predicted concentrations were slightly better at lower offset with the random sampling thickness and using the center-line thickness for the highest offsets. For a line-beam source and varying axial offsets, the relative error of concentration was within 1% of the true value but uncertainty increased by 2 orders of magnitude. Similarly, for no axial offset, the relative error was significantly less than 1% while no trend for uncertainty was found. However, at the largest possible offset for a given source size, the concentrations become erroneous and greater than the allowable 1% relative error. Furthermore, high offsets tended to increase the variance of the transmission spectra by 3 orders of magnitude.

Characterization and Analytical Technique↗
DOE OSTI2025

Evaluation of additive manufacturing side channels for nuclear nonproliferation applications

The nuclear industry is continuing to grow and adopt new technologies to manufacture components. One of the technologies under consideration is additive manufacturing (AM). AM could make production of components at lower cost and could lessen lead times significantly. However, AM could be prone to proliferation risks. AM machines give off signatures during the manufacturing process, and these signatures offer an alternative means of observing the component. Correlations between these signatures and the geometry being manufactured could be developed; enabling proliferators as they could take advantage of these correlations to steal AM manufacturing instructions relating to nuclear technology. This work pertains to preliminary work exploring the feasibility of tapping into AM side channels to predict geometries being manufactured on AM machines. The feasibility of utilizing vibration to draw geometric correlations will be assessed on an Ultimaker 2 + thermoplastic 3D printer.

Additive manufacturing↗
DOE OSTI2025

Chapter 4 - Recent Advances in Identification of Differential Equations from Noisy Data: IDENT Review

Differential equations and numerical methods are extensively used to model various real-world phenomena in science and engineering. With modern developments, we aim to find the underlying differential equation from a single observation of time-dependent data. If we assume that the differential equation is a linear combination of various linear and nonlinear differential terms, then the identification problem can be formulated as solving a linear system. The goal then reduces to finding the optimal coefficient vector that best represents the time derivative of the given data. We review some recent works on the identification of differential equations. We find some common themes for the improved accuracy: (i) The formulation of linear system with proper denoising is important, (ii) how to utilize sparsity and model selection to find the correct coefficient support needs careful attention, and (iii) there are ways to improve the coefficient recovery. We present an overview and analysis of recent developments on the topic.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Results of an interlaboratory study on the working curve in vat photopolymerization II: Towards a standardized method

The working curve measurement in photopolymer additive manufacturing is a ubiquitous measure of the cure depth of a printing resin as a function of radiant exposure of light. The fit parameters from this measurement (the depth of light penetration D p and the critical exposure E c ) are used to evaluate and report a resin’s printability, optimize processing parameters, and inform print and resin quality control. Despite its widespread use, the working curve lacks a standard measurement method. Here, following up on our paper “Results of an Interlaboratory Study on the Working Curve in Vat Photopolymerization” from last year, an interlaboratory study on the working curve was performed using calibrated, reproducible, bandpass filtered light sources. With these light sources, the variability between labs in measured working curves was dramatically reduced from the initial interlaboratory study. Aggregate data from this experiment produced reliable D p and E c measurements at 385 nm of 39.2 ± 3.7 µm and 12.3 ± 3.0 mJ cm −2 , respectively. At 405 nm the values of D p and E c are 69.3 ± 3.8 µm and 17.9 ± 2.3 mJ cm −2 , respectively. The results are agnostic to the thickness measurement tool utilized by participants, ensuring broad applicability across laboratories. We also tested the generalizability of the proposed method of using a filtered light source by filtering a commercial 405 nm light source and obtaining a working curve in agreement with the aggregate data from the interlaboratory study. This interlaboratory study provides a basis for a documentary standard for the working curve, so that the entire photopolymer additive manufacturing industry can share reproducible and interoperable working curve data.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Stable isotope equilibria in the dihydrogen-water-methane-ethane-propane system. Part 1: Path-integral calculations with CCSD(T) quality potentials

Isotopic compositions of alkanes are typically assumed to be kinetically controlled, but recently is has been proposed that alkanes can isotopically equilibrate for both C and H isotopes during natural gas generation. Evaluation of this requires knowledge of the isotopic equilibrium between alkanes and other common hydrogen and carbon bearing species. Here, in this study, we calculate isotopic equilibria within and between gaseous dihydrogen (H 2 ), water (H 2 O), methane (CH 4 ), ethane (C 2 H 6 ) and propane (C 3 H 8 ), including isotope fractionation among molecules, clumped isotope effects, as well as among sites of propane (i.e., the site-specific isotope effects) from 0°C to 500°C using a path-integral method paired with high-level descriptions of molecular potentials and the diagonal correction to the Born Oppenheimer approximation. While path-integral calculations with high- level CCSD(T) potentials are available for the isotopic equilibria involving methane, the path-integral calculations for ethane and propane have only been performed based on lower-level descriptions of the molecular potentials. We analyze the relative importance of various approximations that are commonly employed when isotopic equilibria are evaluated. We find that clumped isotope effects can be calculated to the same accuracy using computationally inexpensive combination of the Bigeleisen-Mayer-Urey model with the molecular potential from density functional theory. In contrast, fractionation and site preferences of both deuterium and carbon-13 benefit from the use of the higher level CCSD(T) potentials and accounting for anharmonic effects. Additionally, for fractionation and site preference of deuterium corrections to Born-Oppenheimer approximation can also be important.

03 NATURAL GAS↗
DOE OSTI2025

Impact of lead on an axisymmetric, single bead blown powder DED overhung geometry

Metal additive manufacturing can be utilized for the near net-shape manufacture of components in a layer wise technique. Traditionally, the buildup process is conducted in the direction of gravity or bottom to top in the vertical orientation; however, with the availability of commercial systems with additive heads or fixturing that can index from vertical, and the need to manufacture larger parts without modifying available systems, the limitation of manufacturing from bottom to top is removed enabling the buildup of larger components printed at an angle from vertical. The effect of gravity on the melt pool and as-deposited component quality when printing off vertical is unknown in literature, especially for axisymmetric components. This understanding is critical for the advancement of manufacturing components of increased size in 4 and 5-axis additive systems. This investigation utilizes blown powder directed energy deposition to evaluate the change in as-printed geometry when the start point is altered in relation to gravity while the part rotates to manufacture an axisymmetric component. The objectives of this work are to determine the impact of the deposition location on the geometric variability on axisymmetric components. This investigation tests the hypothesis that differences in layer height exist due to a change in catchment efficiency when the deposition location is moved to a tangent of the round geometry due to a change in the melt pool dynamics. It was found the ideal deposition location when printing at 26.6-degrees from vertical was at −90-degrees from the top center point of the component, along the tangent, where gravity was pushing the melt pool down, but the rotation of the part was pulling the deposited material towards the top center of the component. This work provides an understanding of layer height stability and catchment efficiency to guide print orientation strategy for high-aspect ratio components. It was found the −90-degree lead deposition had the best layer height stability at 0.6 % as compared to the top-center at 6.3 % and +90-degree deposition location at 9.2 % for the nominal programmed layer height. The change in layer height also effected the final diameter the greatest for the top center deposition location where the diameter diverged by 2.5 % during the overbuild condition and converged by 0.6 %. In conclusion, this finding will increase the manufacturing efficiency of axisymmetric components by increasing the passive stability of the printing process for the successful manufacture of parts without the need for perfectly calibrated manufacturing parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Polarized neutron measurements of the internal magnetization of a ferrimagnet across its compensation temperature

We present the first polarized neutron transmission image of a model Néel ferrimagnetic material, polycrystalline terbium iron garnet (Tb 3 Fe 5 O 12 , TbIG for short), as it is taken through its compensation temperature T comp where the macroscopic magnetization vanishes. Our polarized neutron imaging data and the additional supporting measurements using neutron spin echo spectroscopy and SQUID magnetometry are all consistent with a vanishing internal magnetization at T comp .

Ferrimagnetism↗
DOE OSTI2025

Epitaxial aluminum layer on antimonide heterostructures for exploring Josephson junction effects

In this study, we present results of our recent work of epitaxially-grown aluminum (epi-Al) on antimonide heterostructures, where the epi-Al thin film is grown at either room temperature or below zero °C. A sharp superconducting transition at T ∼ 1.3 K is observed in these epi-Al films. We further show that supercurrent states are realized in Josephson junctions fabricated in the epi-Al/antimonide heterostructures with mobility μ ∼ 1.0 × 10 6 cm 2 /Vs. These results clearly demonstrate we have achieved growing high-quality epi-Al/antimonide heterostructures, a promising platform for the exploration of Josephson junction effects for quantum information science and microelectronics applications.

Antimonide heterostructures↗
DOE OSTI2025

Compressibility and permeability of particulated non-recyclable municipal solid waste

Biofuels from non-recyclable municipal solid waste (NMSW) stand at the forefront of energy sustainability. However, their widespread adoption is hampered by persistent material handling issues stemming from the variability in NMSW material properties. An enhanced understanding of particulated NMSW properties, particularly compressibility and permeability, is essential to address the feedstock handling challenges and optimize the handling equipment. This study measures the compressibility and gas permeability of five streams of NMSW materials (i.e., rigid plastics, cardboard, thin film, paper, and foam) and their mixtures under different stress conditions. The results highlight the significant variability in compressibility and gas permeability among different streams, as well as the impacts of particle sizes. A semi-empirical model capable of predicting the gas permeability of NMSW mixtures is established and validated. Here, the results also highlight that reduced NMSW particle size helps promote consistency in NMSW feedstock’s physical and mechanical properties, which is favored for handling equipment design in waste-to-energy recovery facilities.

09 BIOMASS FUELS↗
DOE OSTI2025

Carbon-conserving bioproduction of malate in an E. coli -based cell-free system

Formate, a biologically accessible form of CO 2 , has attracted interest as a renewable feedstock for bioproduction. However, approaches are needed to investigate efficient routes for biological formate assimilation due to its toxicity and limited utilization by microorganisms. Cell-free systems hold promise due to their potential for efficient use of carbon and energy sources and compatibility with diverse feedstocks. However, bioproduction using purified cell-free systems is limited by costly enzyme purification, whereas lysate-based systems must overcome loss of flux to background reactions in the cell extract. Here, we engineer an E. coli-based system for an eight-enzyme pathway from DNA and incorporate strategies to regenerate cofactors and minimize loss of flux through background reactions. We produce the industrial di-acid malate from glycine, bicarbonate, and formate by engineering the carbon-conserving reductive TCA and formate assimilation pathways. We show that in situ regeneration of NADH drives metabolic flux towards malate, improving titer by 15-fold. Background reactions can also be reduced 6-fold by diluting the lysate following expression and introducing chemical inhibitors of competing reactions. Together, these results establish a carbon-conserving, lysate-based cell-free platform for malate production, producing 64 μM malate after 8 h. This system conserves 43 % of carbon otherwise lost as CO 2 through the TCA cycle and incorporates 0.13 mol CO 2 equivalents/mol glycine fed. Finally, techno-economic analysis of cell-free malate production from formate revealed that the high cost of lysate is a key challenge to the economic feasibility of the process, even assuming efficient cofactor recycling. This work demonstrates the capabilities of cell-free expression systems for both the prototyping of carbon-conserving pathways and the sustainable bioproduction of platform chemicals.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Is a Homologous Series Member Equal to or Greater than the Sum of its Subunits? A Focus on a Few Fe-based BaNiSn3 subunits: LnFeGe3 (Ln = La, Pr)

The homologous series Lnn+1MnGe3n+1 (Ln = Ce, Pr, M = Fe, Co) has proven to be a fruitful platform for tuning physical properties as a function of subunit stacking. In this study, we investigate the crystal growth, structure, and physical properties of PrFeGe3, aiming to deconstruct Pr4Fe3Ge10 (n = 3) into its subunits, including the BaNiSn3 and CeNiSi2 structure types. The electrical resistivity and magnetic susceptibility of PrFeGe3 were measured. The magnetic properties reveal PrFeGe3 to be antiferromagnetic (5 K) with an effective moment of eff = 4.38 B/F.U., larger than the spin-only moment from Pr3+ (3.58 B). Due to the large magnetic moment observed, the oxidation state of the elements was determined using spectroscopic methods including X-ray absorption spectroscopy and X-ray photoelectron spectroscopy. The neutral oxidation state of iron determined from X-ray photoelectron spectroscopy supports itinerant magnetic behavior of iron. Annealing, in tandem with differential scanning calorimetry, revealed PrFeGe3 to be a precursor for the formation of new homologous series members.

36 MATERIALS SCIENCE↗