SEARCH · Engineering Papers

Results for “Racks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Design and Fabrication of the NASA Decoupler Pylon for the F-16 Aircraft

The NASA Decoupler Pylon is a passive means of suppressing wing-store flutter. The feasibility of demonstrating this concept on the F-16 aircraft was established through model wind tunnel tests and analyses. As a result of these tests and studies a ship set of Decoupler Pylons was designed and fabricated for a flight test demonstration on the F-16 aircraft. Basic design criteria were developed during the analysis study pertaining to pylon pitch stiffness, alignment system requirements, and damping requirements. A design was developed which utilized an electrical motor for the pylon alignment system. The design uses a four pin, two link pivot design which results in a remote pivot located at the center of gravity of the store when the store is in the aligned position. The pitch spring was fabricated from a tapered constant stress cantilevered beam. The pylon has the same external lines as the existing production pylon and is designed to use a MAU-12 ejection rack which is the same as the one used with the production pylon. The detailed design and fabrication was supported with a complete ground test of the pylon prior to shipment to NASA.

Clayton, J. D.↗

NASA NTRS1985

Storm severity detection (RF)

Atmospheric electrical emissions occurring in association with Hurricane Alicia were observed by two crossed baseline phase linear interferometers. The sensors were located in San Antonio, Texas, and at Marshall Space Flight Center (MSFC), Huntsville, Alabama. An analysis of the data has indicated that the direction finding (DF) performance of the San Antonio site was extremely good while the DF performance at the MSFC site evidenced erratic behavior. A check of the data acquisition hardware revealed an intermitted problem in one of the radio receiver channels. Since the system has experienced several lightning strikes during the early spring of 1984, it was necessary to ship the entire rack of equipment back to SwRI for refurbishment. Analysis of the DF data from the interferometer site at San Antonio is being done. A limited subset of the MSFC data acquired during Hurricane Alicia has been found to be valid. These were data which satisfied the phase linearity criteria. Approximately 2,000 location estimates have been produced on the valid data. The results of the DF analysis and the location data are being correlated with the McIDAS data base at Marshall Space Flight Center, and with the radar summary data provided by the Hurricane Research Division using the National weather Service radar Facility at Galveston, Texas.

Johnson, R. L.↗

NASA NTRS1986

Economy of middeck payloads

The utilization of the middeck, designed as the crew quarters, for experiments is examined. The dimensions of the middeck's standard lockers, double lockers, adapter plates, and the galley, which are applicable for experiments, are described. The utilities available for middeck payloads include ac and dc electrical power supply, active and passive cooling, vacuum/vent line connections, and data handling, and four basic payload configurations are possible. The development of a middeck accommodations rack to make payload space more flexible and to enable an optimum number and variety of experiments to be flown is proposed. Diagrams of the orbiter's middeck and experimental designs are provided.

Michel, E. L.↗

NASA NTRS1986

Cardiovascular research in space - Considerations for the design of the human research facility of the United States Space Station

The design of the Space Station's Human Research Facility for the collection of information on the long-time physiological adjustments of humans to space is described. The Space Life Sciences-1 mission will carry a rack-mounted echocardiograph for cardiac imaging, a mass spectrometer for cardiac output and respiratory function assessments at rest and during exercise, and a device to stimulate the carotid sinus baroreceptors and measure the resulting changes in heart rate.

Charles, J. B.↗

NASA NTRS1988

The PC/AT compatible computer as a mission control center display processor at Ames-Dryden Flight Research Facility

Since 1982, the Western Aeronautical Test Range of the Ames-Dryden Flight Research Facility has been separating the data acquisition and processing function required on all telemetry pulse code modulation (PCM) data and the display processing function required in the flight research mission control centers (MCCs). These two functions historically have been done on the same set of superminicomputers remote from the MCCs. Removing the display processing function from the realm of the superminis or telemetry-radar acquisition and processing system (TRAPS) and out into the MCCs will allow the research engineers the flexibility to configure their own display processing system to optimize performance during a flight research mission. Meanwhile, the TRAPS will have more time to acquire data. One of the processors chosen is an IBM PC/AT compatible rack-mounted personal computer. This class and type machine will not only allow the transfer of the display processing function into the MCCs, but also allow the research engineers a personalized set of analytic and display tools for use on their own unique sets of data.

Hammons, Kevin R.↗

NASA NTRS1987

Crew factors in the design of the Space Station

The designing of Space Shuttle modules and equipment in order to provide a stimulating and efficient work atmosphere and a pleasant living environment is examined. The habitation module for the eight crew members is divided into four areas: ceiling, floor, port, and starboard. The module is to consist of crew quarters, a wardroom, a galley, a personal hygiene facility, a health maintenance facility, and stowage areas. There is a correlation between the function of the module and its location; for example the galley will be near the wardroom and the personal hygiene facility near the crew quarters. The designs of the equipment for crew accommodation and of the equipment to be maintained and repaired by the crew will be standarized. The design and functions of the crew and equipment restraints, crew mobility aids, racks to contain equipment, and functional units are described.

Robinson, Judith L.↗

NASA NTRS1987

Multiple experiment processing furnace (MEPF) - An overview

A preliminary design has been developed for the MEPF capable of flying initially as a payload on the NASA/MSFC Materials Science Laboratory carrier in the Shuttle cargo bay and later on the Space Station as a rack-mounted payload in the pressurized volume of the U.S. Laboratory Module. The key requirements and the design approach are examined. It is noted that the MEPF modular design approach ensures maintainability and offers a reuse capability for up to 12 flights (with refurbishments and parts replacement between missions, if required). The design incorporates safety features, and adequate redundancy is built in to improve reliability of operations.

Srinivas, R.↗

NASA NTRS1987

The opportunities for space biology research on the Space Station

The goals of space biology research to be conducted aboard the Space Station in 1990s include long-term studies of reproduction, development, growth, physiology, behavior, and aging in both animals and plants. They also include studies of the mechanisms by which gravitational stimuli are sensed, processed, and transmitted to a responsive site, and of the effect of microgravity on each component. The Space Station configuration will include a life sciences research facility, where experiment cyles will be on a 90-day basis (since the Space Station missions planned for the 1990s call for 90-day intervals). A modular approach is taken to accomodate animal habitats, plant growth chambers, and other specimen holding facilities; the modular habitats would be transportable between the launch systems, habitat racks, a workbench, and a variable-gravity centrifuge (included for providing artificial gravity and accurately controlled acceleration levels aboard Space Station).

Ballard, Rodney W.↗

NASA NTRS1988

The PC/AT compatible computer as a mission control center display processor at Ames-Dryden Flight Research Facility

The NASA Ames-Dryden Flight Research Facility's Western Aeronautical Test Range will assign the flight test data display processing function to Mission Control Centers in order to allow research engineers to flexibly configure their own display-processing system to optimize performance during a flight research mission. This will leave the Telemetry Radar Acquisition and Processing System more time to acquire data. One of the processors chosen to handle the display-processing function is an IBM PC/AT-compatible, rack-mounted PC giving engineers a personalized set of analytic and display tools, developed on the basis of off-the-shelf PC/AT-compatible engineering hardware and software items.

Hammons, Kevin R.↗

NASA NTRS1988

Marine gravity of the Southern Ocean and Antarctic margin from Geosat

Geosat altimeter data, collected from an orbit with a ground rack that repeated every 17 days and overlayed one of the 17-day Seasat ground tracks, were used to map the gravity field of the Southern Ocean and the continental margin of Antarctica. The combination of ascending an descending profiles produced a typical Geosat ground track spacing of 70 km at the equator, with the best coverage occurring between the latitudes of 60 and 72 deg in both the Northern and Southern hemispheres. The new data reveal many previously uncharted seamounts and fracture zones in the extreme Southern Ocean areas adjacent to Antarctica, showing the detailed gravity signatures of the passive and active continental margins of Antarctica. Seven large age-offset fracture zones apparent in the Geosat data record the early breakup of Gondwana.

Sandwell, David T.↗

NASA NTRS1988

Hardware development for the surface tension driven convection experiment aboard the USML-1 spacelab mission

The Surface Tension Driven Convection Experiment is a Space Transportation System flight experiment to study both transient and steady thermocapillary fluid flows aboard the USML-1 Spacelab mission planned for March 1992. Hardware is under development to establish the experimental conditions and perform the specified measurements, for both ground based research and the flight experiment in a Spacelab single rack. Major development areas include an infrared thermal imaging system for surface temperature measurement, a CO2 laser and control system for surface heating, and for flow visualization, a He-Ne laser and optical system in conjunction with an intensified video camera. For ground based work the components of each system were purchased or designed, and tested individually. The three systems will be interfaced with the balance of the experimental hardware and will constitute a working engineering model. A description of the three systems and examples of the component performance is given along with the plans for the development of flight hardware.

Pline, A. D.↗

NASA NTRS1989

Computer-aided design of bevel gear tooth surfaces

This paper presents a computer-aided design procedure for generating bevel gears. The development is based on examining a perfectly plastic, cone-shaped gear blank rolling over a cutting tooth on a plane crown rack. The resulting impression on the plastic gear blank is the envelope of the cutting tooth. This impression and envelope thus form a conjugate tooth surface. Equations are presented for the locus of points on the tooth surface. The same procedures are then extended to simulate the generation of a spiral bevel gear. The corresponding governing equations are presented.

Shuo, Hung Chang↗

NASA NTRS1988

Growth of mercuric iodide (HgI2) for nuclear radiation detectors

Mercuric iodide is a material used for the fabrication of the sensing element in solid state X-ray and gamma ray detecting instruments. The operation of the devices is determined to a large degree by the density of structural defects in the single crystalline material used in the sensing element. Since there were strong indications that the quality of the material was degraded by the effects of gravity during the growth process, a research and engineering program was initiated to grow one or more crystals of mercuric iodide in the reduced gravity environment of space. A special furnace assembly was designed which could be accommodated in a Spacelab rack, and at the same time made it possible to use the same growth procedures and controls used when growing a crystal on the ground. The space crystal, after the flight, was subjected to the same evaluation methods used for earth-grown crystals, so that comparisons could be made.

Vandenberg, L.↗

NASA NTRS1988

Comparison of laboratory calibrations of the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) at the beginning and end of the first flight season

Spectral and radiometric calibrations of the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) were performed in the laboratory in June and November, 1987, at the beginning and end of the first flight season. Those calibrations are described along with changes in instrument characteristics that occurred during the flight season as a result of factors such as detachment of the optical fibers to two of the four AVIRIS spectrometers, degradation in the optical alignment of the spectrometers due to thermally-induced and mechanical warpage, and breakage of a thermal blocking filter in one of the spectrometers. These factors caused loss of signal in three spectrometers, loss of spectral resolution in two spectrometers, and added uncertainty in the radiometry of AVIRIS. Results from in-flight assessment of the laboratory calibrations are presented. A discussion is presented of improvements made to the instrument since the end of the first flight season and plans for the future. Improvements include: (1) a new thermal control system for stabilizing spectrometer temperatures, (2) kinematic mounting of the spectrometers to the instrument rack, and (3) new epoxy for attaching the optical fibers inside their mounting tubes.

Vane, Gregg↗

NASA NTRS1988

YAG aerosol lidar

The Global Atmospheric Backscatter Experiment (GLOBE) Mission, using the NASA DC-8 aircraft platform, is designed to provide the magnitude and statistical distribution of atmospheric backscatter cross section at lidar operating wavelengths. This is a fundamental parameter required for the Doppler lidar proposed to be used on a spacecraft platform for global wind field measurements. The prime measurements will be made by a CO2 lidar instrument in the 9 to 10 micron range. These measurements will be complemented with the Goddard YAG Aerosol Lidar (YAL) data in two wavelengths, 0.532 and 1.06 micron, in the visible and near-infrared. The YAL, is being designed to utilize as much existing hardware, as feasible, to minimize cost and reduce implementation time. The laser, energy monitor, telescope and detector package will be mounted on an optical breadboard. The optical breadboard is mounted through isolation mounts between two low boy racks. The detector package will utilize a photomultiplier tube for the 0.532 micron channel and a silicon avalanche photo detector (APD) for the 1.06 micron channel.

Sullivan, R.↗

NASA NTRS1989

Hardware development for the Surface Tension Driven Convection Experiment aboard the USML-1 Spacelab mission

Pline, A. D.↗

NASA NTRS1988

Bioisolation on the Space Station

Animal research on the Space Station presents the need for bioisolation, which is here defined as instrumental and operational provisions, which will prevent the exchange of particles greater than 0.3-micron size and microorganisms between crew and animals. Current design principles for the Biological Research Project thus call for: (1) use of specific pathogen-free animals; (2) keeping animals at all times in enclosed habitats, provided with microbial filters and a waste collection system; (3) placing habitats in a holding rack, centrifuge, and workbench, all equipped with particulate and odor filters, (4) washing dirty cage units in an equipment cleaner, with treatment and recycling of the water; (5) designing components and facilities so as to ensure maximal accessibility for cleaning; and (6) defining suitable operational procedures. Limited ground tests of prototype components indicate that proper bioisolation can thus be achieved.

Bonting, Sjoerd L.↗

NASA NTRS1990

Angle-Ply Weaving

Bias-direction or angle-ply weaving is proposed new process for weaving fibers along bias in conventional planar fabric or in complicated three-dimensional multilayer fabric preform of fiber-reinforced composite structure. Based upon movement of racks of needles and corresponding angle yarns across fabric as fabric being formed. Fibers woven along bias increases shear stiffness and shear strength of preform, increasing value of preform as structural member.

Farley, Gary L.↗