Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “POLYMERIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

2-Isopropenyl-2-oxazoline: Well-Defined Homopolymers and Block Copolymers via Living Anionic Polymerization

Poly(2-isopropenyl-2-oxazoline) (PIPOx) has drawn significant attention for numerous applications. However, the successful living anionic polymerization of 2-isopropenyl-2-oxazoline has not been reported previously. In this paper, we describe how well-defined PIPOx with quantitative yields, controlled molecular weights from 6800 to over 100 000 g/mol and low polydispersity indices (PDI ≤ 1.17) were synthesized successfully via living anionic polymerization using diphenylmethylpotassium/diethylzinc (DPM-K/Et 2 Zn) in tetrahydrofuran (THF) at 0 °C. In particular, we report the precise synthesis of well-defined PIPOx with the highest molecular weight ever reported (over 100 000 g/mol) and low PDI of 1.17. The resulting polymers were characterized by 1 H and 13 C nuclear magnetic resonance spectroscopy (NMR) along with size exclusion chromatography (SEC). Additionally, the reactivity of living PIPOx was investigated by crossover block copolymerization with styrene (St), 2-vinylpyridine (2VP), and methyl methacrylate (MMA). It was found that the nucleophilicity of living PIPOx is of this order: living PS > living P2VP > living PMMA > living PIPOx. The self-assembly behavior in bulk of PIPOx-b-PS-b-PIPOx triblock copolymers having different block ratios of 10:80:10 and 25:50:25 was studied using transmission electron microscopy (TEM). Finally, the formation of spherical and lamellar nanostructures, respectively, was observed.

2-isopropenyl-2-oxazoline↗

Molecular Alignment of a Meta-Aramid on Carbon Nanotubes by In Situ Interfacial Polymerization

Molecularly organized nanocomposites of polymers and carbon nanotubes (CNTs) have great promise as high-performance materials; in particular, conformal deposition of polymers can control interfacial properties for mechanical load transfer, electrical or thermal transport, or electro/chemical transduction. However, controllability of polymer-CNT interaction remains a challenge with common processing methods that combine CNTs and polymers in melt or in solution, often leading to nonuniform polymer distribution and CNT aggregation. In this work, we demonstrate CNTs within net-shape sheets can be controllably coated with a conformal coating of meta-aramid by simultaneous capillary infiltration and interfacial polymerization. We determine that π-interaction between the polymer and CNTs results in chain alignment parallel to the CNT outer wall. Subsequent nucleation and growth of the precipitated aramid forms a smooth continuous layered sheath around the CNTs. These findings motivate future investigation of mechanical properties of the resulting composites, and adaptation of the in situ polymerization method to other substrates.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Cationic α-Diimine Nickel and Palladium Complexes Incorporating Phenanthrene Substituents: Highly Active Ethylene Polymerization Catalysts and Mechanistic Studies of syn/anti Isomerization

α-Diimine palladium complexes incorporating phenanthryl- and 6,7-dimethylphenanthrylimino groups have been synthesized and characterized. The (diimine)PdMeCl complexes prepared from 2,3-butanedione and acenaphthenequinone bearing the unsubstituted phenanthrylimino groups, 12a and 14a, respectively, exist as a mixture syn and anti isomers in a ca. 1:1 ratio. Separation and X-ray diffraction analysis of 14a-syn and 14a-anti isomers confirms the syn/anti assignments. The barrier to interconversion of 14a-syn and 14a-anti via ligand rotation, ΔG ‡ , was found to be 25.5 kcal/mol. The corresponding (diimine)PdMeCl complex prepared from acenaphthenequinone and incorporating the 6,7-dimethylphenanthrylimino group exists solely as the anti isomer, 14b, due to steric crowding which destabilizes the syn isomer. Analogous (diimine)NiBr2 complexes were prepared from 2,3-butanedione incorporating the phenanthrylimino group, 16a, and the 6,7-dimethylphenanthrylimino group, 16b. Nickel-catalyzed polymerizations of ethylene were carried out by activation of the dibromide complexes 16a and 16b using various aluminum alkyl activators. Complex 16a yields a bimodal distribution polymer, the low molecular weight fraction originating from the syn isomer and the high molecular weight fraction arising from the anti isomer. Polymerizations carried out by 16b yield only high molecular weight polymers with monomodal distributions due to the existence of a single isomer (anti) as the active catalyst. All polymers are linear or nearly so. All catalysts are highly active but catalysts derived from 16b are somewhat more active than 16a and exhibit turnover frequencies general over 10 6 and up to 5 × 10 6 per hour (40 °C, 27.2 atm ethylene, 15 min). Here, active palladium ethylene oligomerization catalysts were generated by conversion of the neutral methyl chloride complexes 14a and 14b to the cationic nitrile complexes 15a and 15b via halide abstraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ Polymerization of Polypyrrole and Polyaniline on the Surface of Magnetic Molybdenum Trioxide Nanoparticles: Implications for Water Treatment

Photocatalyst dissolution greatly diminishes the usability of photocatalysts in water treatments. Coating conductive polymers on the surface of photocatalysts can reduce dissolution without compromising the photocatalytic properties of the material. In this investigation, polypyrrole (PPy) and polyaniline (PANI) were used to coat two magnetic MoO 3 nanoparticles with different surface chemistries. The polymer-coated MoO 3 @Fe 3 O 4 nanoparticles were synthesized by optimizing the mole fractions of PPy or PANI, MoO 3 , and Fe 3 O 4 . The optimized PPy@ MoO 3 @Fe 3 O 4 (PMF1) and PANI@MoO 3 @Fe 3 O 4 (PMF2) resulted in 95.39 and 75.98% methylene blue dye removal, respectively. MoO 3 dissolutions of 4.12 and 5.6% were obtained for PMF1 and PMF2, respectively, demonstrating the reduced solubility of the coated nanoparticles as compared to their uncoated counterparts (7.87% for MF1 and 18.1% for MF2). In situ small-angle neutron scattering (SANS) was utilized to investigate the polymerization kinetics of PPy and PANI on nanoparticles. The results revealed that an increase in base material oxygen vacancies resulted in the reduction of both the polymer size and the polymerization rate. Furthermore, this study demonstrated that SANS provides valuable insights into the polymer growth mechanisms on nanoparticle surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plastic Scintillators via Rapid Photoinitiated Cationic Polymerization of Vinyltoluene

Cationic photopolymerization is applied for the rapid curing of a vinyltoluene and fluorophore solution into an efficient plastic scintillator. A hard solid is obtained via UV light-initiated polymerization of vinyltoluene, diaryliodonium salt, 9,9-dimethyl-2-phenylfluorene (PhF), and 9,9-dimethyl-2,7-distyrlfluorene (SFS) at ambient conditions with high conversion rates under a range of cationic photoinitiator concentrations, fluorophore concentrations, and light intensities. Insight into photopolymerization kinetics via photo differential scanning calorimetry (photoDSC) revealed photocuring time scales similar to those achieved in a commercial 3D printing resin. Furthermore, scintillator samples prepared cationically performed well compared to samples of equivalent compositions prepared by a lengthy thermally initiated radical polymerization.

36 MATERIALS SCIENCE↗

Active Sites in a Heterogeneous Organometallic Catalyst for the Polymerization of Ethylene

Heterogeneous derivatives of catalysts developed by Ziegler and Natta are important for the industrial production of polyolefin plastics. However, the interaction between precatalysts, alkylaluminum activators, and oxide supports to form catalytically active materials is poorly understood. This is in contrast to homogeneous or well-defined heterogeneous catalysts that 20 contain resolved molecular structures that relate to activity and selectivity in polymerization reactions. This study describes the reactivity of triisobutylaluminum with high surface area aluminum oxide and a zirconocene precatalyst. Triisobutylaluminum reacts with the zirconocene precatalyst to form hydrides and passivates –OH sites on the alumina surface. The combination of passivated alumina and zirconium hydrides formed in this mixture generate ion-pairs that 25 polymerize ethylene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Block Copolymer Sequence Inversion through Photoiniferter Polymerization

Block copolymers prepared by reversible addition–fragmentation chain transfer (RAFT) polymerization are often restricted to a specific comonomer blocking sequence that is dictated by intermediate radical stability and relative radical leaving group abilities. Techniques that provide alternative pathways for reinitiation of thiocarbonylthio-terminated polymers could allow access to block copolymer sequences currently unobtainable through the RAFT process. In this paper, we report a method for preparing “inverted” block copolymers, whereby the traditional order of monomer addition has been reversed through the use of photoiniferter-mediated radical polymerization. Specifically, thiocarbonylthio photolysis of xanthate- and dithiocarbamate-functional macromolecular chain transfer agents (macro-CTAs) led to the direct formation of leaving group macroradicals otherwise unaffordable by an addition–fragmentation mechanism. We believe this method could provide a route to synthesize multiblock copolymers of synthetically challenging comonomer sequences.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ formation of pyridyl-functionalized poly(3-hexylthiophene)s via quenching of the Grignard metathesis polymerization: Toward ligands for semiconductor quantum dots

The synthesis of well-defined, end-functional poly(3-hexylthiophene)s (P3HTs) by in situ quenching of the Grignard metathesis (GRIM) polymerization is complicated by the extreme tendency to favor difunctional products in all but a few cases. A facile one-pot method for preparing 2-pyridyl and 3-pyridyl P3HTs with high abundance of monofunctional products is established via an examination of the kinetics of the end-functionalization quenching reaction with lithium chloride complexes of 2- and 3-pyridyl Grignard reagents. Density functional theory calculations guide the selection of pyridine as the end group, which provides the capacity to ligate cadmium selenide (CdSe) nanocrystals and arrests aggregation upon thermal annealing when dispersed in a P3HT matrix. The relative abundances of various end-functional products, as ascertained by high-resolution matrix assisted laser desorption ionization time-of-flight mass spectrometry, can be altered through the use of 1-pentene as an additive: GRIM polymerizations quenched with 3-pyridyl and 2-pyridyl Grignard reagents show 5% and 18% abundances of difunctional, pyridyl-capped P3HTs, respectively, when 1-pentene is present at 1000:1 relative to the nickel catalyst. This represents a significant improvement compared to quenching with aryl Grignard reagents, where difunctional products predominate. Furthermore, the ability to manipulate end group compositions coupled with the propensity of pyridyl-functionalized P3HTs to ligate semiconductor quantum dots (SQDs) opens new possibilities for tuning the morphology of conjugated polymer/SQD blends.

36 MATERIALS SCIENCE↗

Formaldehyde Polymerization on (WO3)3/TiO2(110) Model Catalyst

Polymerization of formaldehyde, H2CO, was studied under ultrahigh vacuum conditions on a model catalyst consisting of monodispersed (WO3)3 clusters anchored on TiO2(110. Formaldehyde oligomers, (H2CO)n, desorbing from the polymer that formed on the catalyst surface are detected between 250 and 325 K in temperature programmed desorption experiments. At least two monolayers (ML) of H2CO are required on the surface to observe (H2CO)n desorption and the amount saturates for H2CO coverages in excess of ~30 ML. The presence of H2CO multilayers is required for the polymerization to take place indicating that it had to occur below 100 K. The saturation amount increases with increasing coverage of (WO3)3 clusters with the highest amount of ~13 ML observed on 1.2 (WO3)3/nm2 . No (H2CO)n desorption was observed on the bare TiO2(110) surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvent tunable optical properties of a polymerized vinyl- and thienyl-substituted ionic liquid.

Thermal free radical polymerization of a self-assembled, bifunctional imidazolium-based ionic liquid (IL) monomer bearing both vinyl and thienyl groups is reported. FT-IR spectroscopy proves that the polymerization occurs through both the vinyl and thienyl groups. The polymer is resistant to swelling in water and common organic solvents. The as-synthesized polymer can be readily chemically doped and de-doped. Small-angle X-ray scattering studies indicate that the dried polymer adopts a weakly ordered lamellar structure. The p-doped, ethanol-solvated polymer undergoes a structural conversion to a nonlamellar phase. The absorption and photoluminescence spectra can be modulated in both the neutral (thiophene) and p-doped states depending on whether the polymer is dry or ethanol-solvated. The results demonstrate the possibility of incorporating solvent responsive optical characteristics in a {pi}-conjugated polymer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polymerization of Carbon Dioxide: A Chemistry View of Molecular-to-Nonmolecular Phase Transitions

Under high pressure, simple molecular solids transform into nonmolecular (extended) solids as compression energies approach the energies of strong covalent bonds in constituent chemical species. Unlike molecular and extended phase transitions, these exhibit path dependent phases, phase boundaries, phase metastabilities, and structural distortions that lead to large uncertainties in both experimental and theoretical phase diagrams. Here we present experimental and theoretical evidence that carbon dioxide polymerizes to extended phase V at 20 GPa, indicating a substantially lower equilibrium phase boundary than previously suggested. Clearly, these results indicate extended structures are inherently more stable above 20 GPa and the presence of a strong activation barrier hindering the polymerization in the intermediate pressure region between 20 and 40 GPa. Further, the present results advocate a chemistry view of molecular to nonmolecular phase transitions governed by constraints to kinetics and local energy minima that go beyond thermodynamics and are analogous to the graphite-diamond transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly Tailorable Materials based on 2-Vinyl-4,4-dimethyl azlactone: (Co) Polymerization, Synthetic Manipulation and Characterization

We report the synthesis and characterization of (co)polymers based on vinyl dimethyl azlactone (VDMA) made using free radical polymerization techniques, as well as the modification of VDMA and VDMA-based polymers. VDMA is a 2-alkenyl-2-oxazolin-5-one monomer that contains a polymerizable vinyl moiety as well as a highly reactive, pendant azlactone. Conventional free radical (co)polymerizations with vinyl pyrrolidone were carried out with 2,2 -azobisisobutyronitrile (AIBN) in benzene at 65 C. The copolymers were characterized by FTIR, 1H NMR, 13C NMR, and SEC-MALS. Thermal properties of the (co)polymers were also examined by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Because VDMA is known to react with amines, exposure of the monomer or (co)polymer to a solution containing a primary amine (e.g., n-hexyl amine) yields a functionalized monomer or polymer, respectively. Functionalization was monitored in situ and in real-time using an FTIR fiber probe.

36 MATERIALS SCIENCE↗

Living anionic polymerization using a microfluidic reactor

Living anionic polymerizations were conducted within aluminum-polyimide microfluidic devices. Polymerizations of styrene in cyclohexane were carried out at various conditions, including elevated temperature (60 °C) and high monomer concentration (42%, by volume). The reactions were safely maintained at a controlled temperature at all points in the reactor. Conducting these reactions in a batch reactor results in uncontrolled heat generation with potentially dangerous rises in pressure. Moreover, the microfluidic nature of these devices allows for flexible 2D designing of the flow channel. Four flow designs were examined (straight, periodically pinched, obtuse zigzag, and acute zigzag channels). The ability to use the channel pattern to increase the level of mixing throughout the reactor was evaluated. When moderately high molecular mass polymers with increased viscosity were made, the patterned channels produced polymers with narrower PDI, indicating that passive mixing arising from the channel design is improving the reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactive triblock polymers from tandem ring-opening polymerization for nanostructured vinyl thermosets

Multiply functional hydroxyl telechelic poly(cyclooctene-s-5-norbornene-2-methylene methacrylate) was synthesized by ring opening metathesis (co)polymerization of cis-cyclooctene and 5-norbornene-2-methylene methacrylate using the second generation Grubbs catalyst in combination with a symmetric chain transfer agent bearing hydroxyl functionality. The resulting hydroxyl-telechelic polymer was used as a macroinitiator for the ring opening transesterification polymerization of d,l-lactide to form reactive poly(lactide)-b-poly(cyclooctene-s-5-norbornene-2-methylene methacrylate)-b-poly(lactide) triblock polymers. Subsequently, the triblocks were crosslinked by free radical copolymerization with several vinyl monomers including styrene, divinylbenzene, methyl methacrylate, and ethyleneglycol dimethacrylate. Certain conditions led to optically transparent thermosets with mesoscale phase separation as evidenced by small angle X-ray scattering, differential scanning calorimetry and transmission electron microscopy. Disordered, bicontinuous structures with nanoscopic domains were generated in several cases, rendering the samples attractive for size-selective membrane applications.

36 MATERIALS SCIENCE↗

A chemical switch enabled autonomous two-stage crosslinking polymeric binder for high performance silicon anodes

Silicon (Si) is a promising high-capacity anode material for high-energy-density lithium-ion batteries. However, the drastic volumetric changes of Si upon lithiation/delithiation hinder the practical use of Si anodes. Although adhesive polymeric binders, such as poly(acrylic acid) (PAA), mitigate this issue, the cycling performance of the fabricated Si anodes is still far from meeting the criteria of practical applications. In this study, we present a novel polymeric binder system for Si anodes consisting of PAA, a chemical switch (ammonia, NH 3 ), and a crosslinker (branched polyethylenimine, PEI). The crosslinking between PAA and PEI is switched off in the slurry, which can then be turned on during electrode drying. Interestingly, the crosslinking reaction consists of two stages: ionic cross-linking (PAA-PEI-i) and covalent crosslinking (PAA-PEI-c) at a higher temperature (e.g., 130 °C). In half-cells, Si anodes fabricated using the PAA-PEI-c binder show a 67% increase in capacity retention compared to PAA anodes over 150 cycles at C/3 rate. The PAA-PEI-c binder also outperforms PAA in full cells. In addition, the chemical switch controlled crosslinking binder system also facilitates the slurry making process by avoiding early crosslinking. This system requires no additional steps compared to the conventional electrode lamination process, showing enormous potential for direct adoption in large-scale manufacturing.

25 ENERGY STORAGE↗

Adsorption and electron-induced polymerization of methyl methacrylate on Ru(1010)

The adsorption and electron irradiation of methyl methacrylate (MMA) on a Ru(1010) surface have been studied using x-ray photoelectron spectroscopy (XPS), temperature programmed desorption (TPD), and low energy ion scattering. TPD analysis indicates that a monolayer of MMA chemisorbs and dissociates on the Ru(1010) surface. The reaction products observed upon heating include H{sub 2}, CO, CO{sub 2}, and a small amount of MMA. Physisorbed multilayers of MMA desorb at temperatures around 170 K. Electron irradiation of physisorbed MMA at 140 K leads to a modification of the MMA film: The XPS spectra show an increase in thermal stability of the film with retention of the MMA structure, and indicate that electron irradiation induces polymerization. An increase in the electron bombardment fluence induces a degradation of the formed polymerized species and leads to the accumulation of carbon on the Ru surface. These results are relevant to the accumulation of carbon on surfaces of Ru films that serve as capping layers on Mo/Si multilayer mirrors used in extreme ultraviolet lithography.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Colossal photostructural changes in chalcogenide glasses: Athermal photoinduced polymerization in As{sub x}S{sub 100-x} bulk glasses revealed by near-bandgap Raman scattering

Near-bandgap Raman scattering was used to induce and study photostructural changes in As{sub x}S{sub 100-x} bulk glasses (5{<=}x{sub As}{<=}40) revealing a new photoinduced polymerization effect. Raman spectra were recorded also in off-resonant conditions allowing for a detailed comparison between the 'equilibrium' glass structure and the metastable one induced by illumination. It is shown that in S-rich glasses, structural changes involve the athermal scission of S{sub 8} rings and their polymerization to S{sub n} chains. The fraction of bonds involved in this effect is surprisingly high, being one order of magnitude higher than the corresponding fractions reported up to now in photostructural studies in chalcogenide glasses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of residual monomers resulting from the chemical polymerization process of dental materials

The residual monomer present in post-polymerized dental materials encourages premature degradation of the reconstructed tooth. That is why the residual monomer should be quantified in a simple, fast, accurate and reproducible manner. In our work we propose such an approach for accurate determination of the residual monomer in dental materials which is based on low-field nuclear magnetic resonance (NMR) relaxometry. The results of the NMR approach are compared with those of the high performance liquid chromatography (HPLC) technique. The samples under study contain the main monomers (2,2-bis[4-(2-hydroxy-3-methacryloyloxypropoxy)phenyl]propane and triethylene glycol dimethacrylate) constituting the liquid phase of most dental materials and an initiator. Two samples were analyzed with different ratios of chemical initiation systems: N,N-dimethyl-p-toluide: benzoyl peroxide (1:2 and 0.7:1.2). The results obtained by both techniques highlight that by reducing the initiator the polymerization process slows down and the amount of residual monomer reduces. This prevents the premature degradation of the dental fillings and consequently the reduction of the biomaterial resistance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗