DOE OSTI · 951230
Living anionic polymerization using a microfluidic reactor
Abstract
Living anionic polymerizations were conducted within aluminum-polyimide microfluidic devices. Polymerizations of styrene in cyclohexane were carried out at various conditions, including elevated temperature (60 °C) and high monomer concentration (42%, by volume). The reactions were safely maintained at a controlled temperature at all points in the reactor. Conducting these reactions in a batch reactor results in uncontrolled heat generation with potentially dangerous rises in pressure. Moreover, the microfluidic nature of these devices allows for flexible 2D designing of the flow channel. Four flow designs were examined (straight, periodically pinched, obtuse zigzag, and acute zigzag channels). The ability to use the channel pattern to increase the level of mixing throughout the reactor was evaluated. When moderately high molecular mass polymers with increased viscosity were made, the patterned channels produced polymers with narrower PDI, indicating that passive mixing arising from the channel design is improving the reaction conditions.
Explore related subjects
Keep this discovery
Explore connections, maps & timelines
Iida, Kazunori, Chastek, Thomas Q, Beers, Kathryn L, Cavicchi, Kevin A, Chun, Jaehun, Fasolka, Michael J. 2009-02-01. Living anionic polymerization using a microfluidic reactor. https://doi.org/10.1039/b810006c
Cite the original work for its findings. Save a collection to share your selection of sources.