Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Heteroepitaxial growth of SnO{sub 2} thin films on SrTiO{sub 3} (111) single crystal substrate by laser molecular beam epitaxy

SnO{sub 2} films with a thickness around 150 nm were deposited on the (111) surface of a SrTiO{sub 3} single crystal substrate by laser molecular beam epitaxy technique in a temperature range 600-750 deg. C and oxygen pressure from 10{sup -3} to 1 Pa, respectively. The growth behavior was in situ monitored by reflection high-energy electron diffraction, and the epitaxial relations were further investigated by ex situ x-ray diffraction measurement in different geometries. All the films were confirmed to be highly (200) oriented showing good crystalline quality, despite the large lattice mismatch between SnO{sub 2} and SrTiO{sub 3}. Based on the crystallographic model and structure analysis, six equivalent directions in the SrTiO{sub 3} (111) surface for the nucleation of SnO{sub 2} were discovered, which confirmed the existence of sixfold symmetrical domains in the SnO{sub 2} epilayer. Additionally, the optical dielectric function of the SnO{sub 2}/SrTiO{sub 3} epitaxial film was simulated by the Tauc-Lorentz-Drude model in the UV-vis-NIR region.

36 MATERIALS SCIENCE↗

Characterization of Cu buffer layers for growth of L1{sub 0}-FeNi thin films

A Cu(001) layer was fabricated on a Au(001) layer to investigate the use of Cu as a buffer layer for growing L1{sub 0}-FeNi thin films. The epitaxial growth of a Cu buffer layer was observed using reflection high-energy electron diffraction. The flatness of the layer improved drastically with an increase in the substrate temperature although the layer was an alloy (AuCu{sub 3}). An FeNi thin film was epitaxially grown on the AuCu{sub 3} buffer layer by alternate monatomic layer deposition and the formation of an L1{sub 0}-FeNi ordered alloy was expected. The AuCu{sub 3} buffer layer is thus a promising candidate material for the growth of L1{sub 0}-FeNi thin films.

36 MATERIALS SCIENCE↗

Control of surface adatom kinetics for the growth of high-indium content InGaN throughout the miscibility gap

The surface kinetics of InGaN alloys grown via metal-modulated epitaxy (MME) are explored in combination with transient reflection high-energy electron diffraction intensities. A method for monitoring and controlling indium segregation in situ is demonstrated. It is found that indium segregation is more accurately associated with the quantity of excess adsorbed metal, rather than the metal-rich growth regime in general. A modified form of MME is developed in which the excess metal dose is managed via shuttered growth, and high-quality InGaN films throughout the miscibility gap are grown.

36 MATERIALS SCIENCE↗

The role of kinetics on the Mn-induced reconstructions of the GaAs(001) surface

A combined scanning tunneling microscopy and low-energy electron diffraction investigation of the Mn/GaAs(001) interface formation is reported. The interface, grown on a (2 x 4) reconstructed substrate produced by molecular beam epitaxy, was studied as a function of Mn evaporation with thickness ranging from 1/8 ML to 1 ML. The interaction of Mn atoms with the semiconductor surface is strong and leads to surface reconstructions involving a rearrangement of the two outmost atomic layers of the substrate. For Mn thickness lower than 1/2 ML, the surface is characterized by a (2 x 1) periodicity. Conversely, when the Mn deposition is increased to 1/2 ML the surface reconstruction is strongly dependent on the preparation procedure. If Mn deposition is performed on the substrate at 390 deg. C, a fully ordered surface characterized by a clear (2 x 2) reconstruction is obtained, whereas, annealing the sample after Mn deposition, gives a disordered surface with a (2 x 1) symmetry. An intermediate phase between (2 x 1) and (2 x 2) is found for Mn depositions in between 1/4 and 1/2 ML. No further structural evolution was observed for both preparation methods above 1/2 ML coverage.

36 MATERIALS SCIENCE↗

Adsorption of silicon on Au(110): An ordered two dimensional surface alloy

We report on experimental evidence for the formation of a two dimensional Si/Au(110) surface alloy. In this study, we have used a combination of scanning tunneling microscopy, low energy electron diffraction, Auger electron spectroscopy, and ab initio calculations based on density functional theory. A highly ordered and stable Si-Au surface alloy is observed subsequent to growth of a sub-monolayer of silicon on an Au(110) substrate kept above the eutectic temperature.

36 MATERIALS SCIENCE↗

Influence of deformation on structural-phase state of weld material in St3 steel

The structural-phase condition of the weld material subjected to the plastic deformation was investigated using the translucent diffraction electron microscopy method. The investigations were carried out near the joint of the weld and the base metal. The seam was done by the method of manual arc welding without artificial defects. The St3 steel was taken as the welded material. Influence of the plastic deformation on morphology, phase composition, defect structure and its parameters of weld metal was revealed. All investigations were done at the distance of 0.5 mm from the joint of the weld and the base metal at the deformation degrees from 0 to 5% and after destruction of a sample. It was established that deformation of the sample did not lead to qualitative changes in the structure (the structure is still presented by ferrite-pearlite mixture) but changed the quantitative parameters of the structure, namely, with the increase of plastic deformation a part of the pearlite component becomes more and more imperfect. In the beginning it turns into the destroyed pearlite then into ferrite, the volume fraction of pearlite is decreased. The polarization of dislocation structure takes place but it doesn’t lead to the internal stresses that can destroy the sample.

36 MATERIALS SCIENCE↗

Twins and their boundaries during homoepitaxy on Ir(111)

The growth and annealing behavior of strongly twinned homoepitaxial films on Ir(111) have been investigated by scanning tunneling microscopy, low-energy electron diffraction, and surface x-ray diffraction. In situ surface x-ray diffraction during and after film growth turned out to be an efficient tool for the determination of twin fractions in multilayer films and to unravel the nature of lateral twin crystallite boundaries. The annealing of the twin structures is shown to take place in a two-step process; first, the length of the lateral twin crystallite boundaries is reduced, without affecting the amount of twinned material, and then, at much higher temperatures, the twins themselves anneal. Within moderately annealed films lateral twin crystallite boundaries are visible at the film surface as fractional steps from which strain fields extend. The nature of these boundaries is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of phases in the films of a Ag-In-Se system

Processes of electron-diffraction structure analysis have been used to study the processes of phase formation and phase transitions in thin layers of a Ag-In-Se system. The phases formed at the onset of interaction between the films and phase transformations occurring during annealing of the samples in vacuum are established. It is found that thin films of the AgInSe{sub 2} compound formed as a result of simultaneous or consecutive deposition of components are amorphous, and crystallization brings about the formation of textured films with high structural quality

36 MATERIALS SCIENCE↗

La2MnV)6 Double Perovskite: a Structural Magnetic and X-ray Absorption Investigation

The synthesis, electron diffraction (ED), synchrotron X-ray and neutron structure, X-ray absorption spectroscopy (XAS) and magnetic property studies of La{sub 2}MnVO{sub 6} double perovskite are described. Analysis of the synchrotron powder X-ray diffraction data for La{sub 2}MnVO{sub 6} indicates a disordered arrangement of Mn and V at the B-site of the perovskite structure. Absence of super-lattice reflections in the ED patterns for La{sub 2}MnVO{sub 6} supports the disordered cation arrangement. Room temperature time-of-flight (TOF) neutron powder diffraction (NPD) data show no evidence of cation ordering, in corroboration with the ED and synchrotron studies (orthorhombic Pnma, a = 5.6097(3), b = 7.8837(5) and c = 5.5668(3) {angstrom}; 295 K, NPD). A comparison of XAS analyses of La{sub 2}TVO{sub 6} with T = Ni and Co shows T{sup 2+} formal oxidation state while the T = Mn material evidences a Mn{sup 3+} admixture into a dominantly Mn{sup 2+} ground state. V-K edge measurements manifest a mirror image behavior with a V{sup 4+} state for T = Ni and Co with a V{sup 3+} admixture arising in the T = Mn material. The magnetic susceptibility data for La{sub 2}MnVO{sub 6} show ferromagnetic correlations; the observed effective moment, {mu}{sub eff} (5.72 {micro}B) is much smaller than the calculated moment (6.16 {micro}B) based on the spin-only formula for Mn{sup 2+} (d{sup 5}, HS)/V{sup 4+} (d{sup 1}), supportive of the partly oxidized Mn and reduced V scenario (Mn{sup 3+}/V{sup 3+}).

36 MATERIALS SCIENCE↗

Phase relations in a barium-rich high-temperature region (25-45 mol% CuO, 900-1100 deg. C) of the BaO-CuO{sub x} system

The phase relations have been studied in the BaO-CuO{sub x} system in the range of 25.0-45.0 mol% CuO at 900-1100 deg. C at P(O{sub 2})=21 kPa (air) by visual polythermal analysis (VPA), powder X-ray diffraction (XRD), electron diffraction (ED) with simultaneous energy-dispersive X-ray (EDX) elemental analysis in a transmission electron microscope (TEM), and iodometric chemical analysis. The discrete deviations 2.02 (101:50), 2.04 (102:50), 2.10 (105:50) of Ba/Cu (Ba:Cu) composition from the stoichiometric ratio 2:1 have been found for the known Ba{sub 2}CuO{sub 3+{delta}} oxides in the subsolidus region 900-970 deg. C. Unit cell parameters of the 101:50 orthorhombic oxide, 102:50 tetragonal one, 105:50 orthorhombic one are, respectively, a=4.049, b=3.899, c=13.034 A; a=3.985, c=12.968 A; a=4.087, b=3.897 and c=12.950 A. ED patterns of the 101:50, 102:50, 105:50 oxides show characteristic supercell reflections with the respective vector 1/60[5 4 0], {approx}2/11<1 1 0> and 1/6[2 0 0]. Oxides of the 2:1, 7:4, 5:3 and 23:20 compositions have been found in the crystallization region 970-1050 deg. C. Unit cell parameters of the 2:1 orthorhombic oxide are a=4.095, b=3.795, c=13.165 A. Interplanar spacings and X-ray characteristic peak intensities of the 7:4, 5:3 and 23:20 oxides are given. Oxides 2:1 and 7:4 melt pseudocongruently at 1020 and 1005 deg. C, oxides 5:3 and 23:20 melt incongruently at 995 and 980 deg. C, respectively. A diagram of the phase relations in the studied region of the BaO-CuO{sub x} system has been constructed, whose structure is considered as the total projection of phase states of the system existing for different x. - Graphical Abstract: A diagram of phase relations in the BaO-CuO{sub x} system in the range of 30.0-45.0 mol% CuO at 900-1050 deg. C at P(O{sub 2})=21 kPa (air) constructed on the data obtained by visual polythermal analysis (the liquidus line), XRD and ED with elemental analysis. Highlights: > A combination of physical-chemical and structural methods was used. > New discrete oxides have been found. > The diagram reflects the total projection of phase states at different x.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure of Fe{sub 3}Si on Si(100) substrates

The improved performance of large-scale integrated circuits (LSIs) by the shrinking of devices is becoming difficult due to physical limitations. Here we report, the growth and formation of Fe{sub 3}Si on Si(100) and characterized by x-ray photoemission, UV photoemission and low energy electron diffraction to study the electronic structure. The results revealed that the DO{sub 3} phase formation is exist and photoemission results also support the electron diffraction outcome.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparative determination of the {alpha}/{beta} phase fraction in {alpha}+{beta}-titanium alloys using X-ray diffraction and electron microscopy

A comparison is made between the measured {alpha}/{beta} phase fractions in Ti-6246 using X-ray diffraction (XRD) and electron microscopy. Image analysis of SEM and TEM images was compared to the phase fraction estimate obtained using electron backscattered diffraction, lab and high-energy synchrotron XRD. There was a good agreement between the electron microscopic and diffraction techniques, provided that the microstructural parameters of grain size and texture are estimated correctly when using quantitative Rietveld refinement.

36 MATERIALS SCIENCE↗

Phase Constituents and Microstructure of Interaction Layer Formed in U-Mo Alloys vs Al Diffusion Couples Annealed at 873 K (600°C)

U-Mo dispersion and monolithic fuels are being developed to fulfill the requirements for research reactors, under the Reduced Enrichment for Research and Test Reactors program. In dispersion fuels, particles of U-Mo alloys are embedded in the Al-alloy matrix, while in monolithic fuels, U-Mo monoliths are roll bonded to the Al-alloy matrix. In this study, interdiffusion and microstructural development in the solid-to-solid diffusion couples, namely, U-15.7 at. pct Mo (7 wt pct Mo) vs pure Al, U-21.6 at. pct Mo (10 wt pct Mo) vs pure Al, and U-25.3 at. pct Mo (12 wt pct Mo) vs pure Al, annealed at 873 K (600 degrees C) for 24 hours, were examined in detail. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and electron probe microanalysis (EPMA) were employed to examine the development of a very fine multiphase interaction layer with an approximately constant average composition of 80 at. pct Al. Extensive TEM was carried out to identify the constituent phases across the interaction layer based on selected area electron diffraction and convergent beam electron diffraction (CBED). The cubic-UAl3, orthorhombic-UAl4, hexagonal-U6Mo4Al43, and cubic-UMo2Al20 phases were identified within the interaction layer that included two- and three-phase layers. Residual stress from large differences in molar volume, evidenced by vertical cracks within the interaction layer, high Al mobility, Mo supersaturation, and partitioning toward equilibrium in the interdiffusion zone were employed to describe the complex microstructure and phase constituents observed. A mechanism by compositional modification of the Al alloy is explored to mitigate the development of the U6Mo4Al43 phase, which exhibits poor irradiation behavior that includes void formation and swelling.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Three-dimensional characterization of bainitic microstructures in low-carbon high-strength low-alloy steel studied by electron backscatter diffraction

We investigated the microstructural evolution of high strength low alloy steel, Fe–2.0Mn–0.15Si–0.05C (wt.%), by varying the continuous cooling rates from 1 K/s to 50 K/s using three-dimensional electron backscatter diffraction and transmission electron microscopy. Granular bainitic microstructure was prevalent under a slow cooling rate of 1–10 K/s, while lath-type bainite was dominant at a high cooling rate of 50 K/s. The acicular ferrite that was the major microstructure under the intermediate ranges of cooling rates between 10 K/s and 30 K/s was tangled with each other, leading to a three-dimensional interwoven structure with highly misoriented grains. Because of the formation of three-dimensional structures, we propose that the terms “acicular ferrite” and “bainitic ferrite,” which are currently used in steel, be replaced by the terms “interwoven acicular bainite” and “lath bainite,” respectively. Moreover, we also confirmed that the cooling rate is an important factor in determining whether bainitic microstructures occur in the form of granular bainite, interwoven bainite, or lath bainite. - Highlights: • The morphology of bainitic grains was characterized by 3D-EBSD. • The ‘interwoven bainite’ and ‘lath bainite’ were suggested. • Interwoven bainite consisted of lenticular plates that were interlinked in 3D regime. • The packets of lath bainite were aligned in a specific direction.

36 MATERIALS SCIENCE↗

Quantitative study of particle size distribution in an in-situ grown Al–TiB{sub 2} composite by synchrotron X-ray diffraction and electron microscopy

Synchrotron X-ray diffraction and transmission electron microscopy (TEM) were applied to quantitatively characterize the average particle size and size distribution of free-standing TiB{sub 2} particles and TiB{sub 2} particles in an in-situ grown Al–TiB{sub 2} composite. The detailed evaluations were carried out by X-ray line profile analysis using the restricted moment method and multiple whole profile fitting procedure (MWP). Both numerical methods indicate that the formed TiB{sub 2} particles are well crystallized and free of crystal defects. The average particle size determined from different Bragg reflections by the restricted moment method ranges between 25 and 55 nm, where the smallest particle size is determined using the 110 reflection suggesting the highest lateral-growth velocity of (110) facets. The MWP method has shown that the in-situ grown TiB{sub 2} particles have a very low dislocation density (~ 10{sup 11} m{sup −} {sup 2}) and their size distribution can be described by a log-normal distribution. Good agreement was found between the results obtained from the restricted moment and MWP methods, which was further confirmed by TEM. - Highlights: • Accurate quantitative characterization of in-situ grown T{sub i}B{sub 2} particles has been achieved. • Particle size anisotropy was revealed indicating 110 facets being largest during T{sub i}B{sub 2} growth. • A wide size distribution was observed for T{sub i}B{sub 2} particles with a dominant size smaller than 100 nm.

36 MATERIALS SCIENCE↗

Electron backscatter diffraction: Strategies for reliable data acquisition and processing

In electron backscatter diffraction (EBSD) software packages there are many user choices both in data acquisition and in data processing and display. In order to extract maximum scientific value from an inquiry, it is helpful to have some guidelines for best practice in conducting an EBSD investigation. The purpose of this article therefore is to address selected topics of EBSD practice, in a tutorial manner. The topics covered are a brief summary on the principles of EBSD, specimen preparation, calibration of an EBSD system, experiment design, speed of data acquisition, data clean-up, microstructure characterisation (including grain size) and grain boundary characterisation. This list is not meant to cover exhaustively all areas where EBSD is used, but rather to provide a resource consisting of some useful strategies for novice EBSD users.

36 MATERIALS SCIENCE↗

Electron backscattering diffraction analysis of an ancient wootz steel blade from central India

The electron backscattering diffraction technique was used to analyse the nature of carbides present in an ancient wootz steel blade. Bulky carbides, pro-eutectoid carbide along the prior austenite grain boundaries and fine spheroidized carbides were detected. Electron backscattering diffraction was employed to understand the texture of these carbides. The orientations of the cementite frequently occur in clusters, which points to a common origin of the members of the cluster. For the bands of coarse cementite, the origin is probably large coarse particles formed during the original cooling of the wootz cake. Pearlite formed earlier in the forging process has led to groups of similarly oriented fine cementite particles. The crystallographic texture of the cementite is sharp whereas that of the ferrite is weak. The sharp cementite textures point to the longevity of the coarse cementite throughout the repeated forging steps and to the influence of existing textured cementite on the nucleation of new cementite during cooling.

36 MATERIALS SCIENCE↗