Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electronic and electrical engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Temperature-induced degradation of GaN HEMT: An in situ heating study

High-power electronics, such as GaN high electron mobility transistors (HEMTs), are expected to perform reliably in high-temperature conditions. This study aims to gain an understanding of the microscopic origin of both material and device vulnerabilities to high temperatures by real-time monitoring of the onset of structural degradation under varying temperature conditions. This is achieved by operating GaN HEMT devices in situ inside a transmission electron microscope (TEM). Electron-transparent specimens are prepared from a bulk device and heated up to 800 °C. High-resolution TEM (HRTEM), scanning TEM (STEM), energy-dispersive x-ray spectroscopy (EDS), and geometric phase analysis (GPA) are performed to evaluate crystal quality, material diffusion, and strain propagation in the sample before and after heating. Gate contact area reduction is visible from 470 °C accompanied by Ni/Au intermixing near the gate/AlGaN interface. Elevated temperatures induce significant out-of-plane lattice expansion at the SiNx/GaN/AlGaN interface, as revealed by geometry-phase GPA strain maps, while in-plane strains remain relatively consistent. Exposure to temperatures exceeding 500 °C leads to almost two orders of magnitude increase in leakage current in bulk devices in this study, which complements the results from our TEM experiment. The findings of this study offer real-time visual insights into identifying the initial location of degradation and highlight the impact of temperature on the bulk device’s structure, electrical properties, and material degradation.

36 MATERIALS SCIENCE↗
NASA NTRS1991

Large space structures and systems in the space station era: A bibliography with indexes (supplement 03)

Bibliographies and abstracts are listed for 1221 reports, articles, and other documents introduced into the NASA scientific and technical information system between January 1, 1991 and June 30, 1991. Topics covered include large space structures and systems, space stations, extravehicular activity, thermal environments and control, tethering, spacecraft power supplies, structural concepts and control systems, electronics, advanced materials, propulsion, policies and international cooperation, vibration and dynamic controls, robotics and remote operations, data and communication systems, electric power generation, space commercialization, orbital transfer, and human factors engineering.

Source record↗
NASA NTRS2004

Testing of Environmental Satellite Bus-Instrument Interfaces Using Engineering Models

This paper discusses the formulation and execution of a laboratory test of the electrical interfaces between multiple atmospheric scientific instruments and the spacecraft bus that carries them. The testing, performed in 2002, used engineering models of the instruments and the Aura spacecraft bus electronics. Aura is one of NASA s Earth Observatory System missions. The test was designed to evaluate the complex interfaces in the command and data handling subsystems prior to integration of the complete flight instruments on the spacecraft. A problem discovered during the flight integration phase of the observatory can cause significant cost and schedule impacts. The tests successfully revealed problems and led to their resolution before the full-up integration phase, saving significant cost and schedule. This approach could be beneficial for future environmental satellite programs involving the integration of multiple, complex scientific instruments onto a spacecraft bus.

Gagnier, Donald↗
NASA NTRS1998

SiC Technology

Silicon carbide (SiC)-based semiconductor electronic devices and circuits are presently being developed for use in high-temperature, high-power, and/or high-radiation conditions under which conventional semiconductors cannot adequately perform. Silicon carbide's ability to function under such extreme conditions is expected to enable significant improvements to a far-ranging variety of applications and systems. These range from greatly improved high-voltage switching [1- 4] for energy savings in public electric power distribution and electric motor drives to more powerful microwave electronics for radar and communications [5-7] to sensors and controls for cleaner-burning more fuel-efficient jet aircraft and automobile engines. In the particular area of power devices, theoretical appraisals have indicated that SiC power MOSFET's and diode rectifiers would operate over higher voltage and temperature ranges, have superior switching characteristics, and yet have die sizes nearly 20 times smaller than correspondingly rated silicon-based devices [8]. However, these tremendous theoretical advantages have yet to be realized in experimental SiC devices, primarily due to the fact that SiC's relatively immature crystal growth and device fabrication technologies are not yet sufficiently developed to the degree required for reliable incorporation into most electronic systems [9]. This chapter briefly surveys the SiC semiconductor electronics technology. In particular, the differences (both good and bad) between SiC electronics technology and well-known silicon VLSI technology are highlighted. Projected performance benefits of SiC electronics are highlighted for several large-scale applications. Key crystal growth and device-fabrication issues that presently limit the performance and capability of high temperature and/or high power SiC electronics are identified.

Neudeck, Philip G.↗
DOE OSTI2024

Materials genome innovation for computational software (magics) center

Functional layered material (LM) architectures will dominate nanomaterials science in this century. We have developed theory, modeling, simulation, and software and data tools that enhance understanding and AI guide synthesis, enable characterization of complex structures, and improve capabilities in the predictive design and growth of LMs. Research at the Center has focused on: Computational synthesis and characterization: AI guided synthesis and experimental synthesis of stacked LMs with tailored properties via optimized chemical vapor deposition (CVD) growth and liquid-phase exfoliation; study defects, edges, grain boundaries, wrinkling of atomic layers and their effects on chemical, mechanical, electrical, and optical properties. Far-from-equilibrium processes: Joint experimental and simulation based probe of electronic processes with NAQMD and ultrafast X-ray free-electron laser (XFEL) and ultrafast electron diffraction (UED) facilities at Stanford. Experimentally validate NAQMD by ultrafast electron diffraction and X-ray spectroscopy studies of structural and excited state dynamics, shape fluctuations, and phonon dynamics. Scalable software: Simulation engines for desktop-to-exascale platforms using low-overhead, linear-scaling QMD algorithms; divide-conquer-recombine NAQMD with electronic excitations; extended-Lagrangian reactive molecular dynamics (RMD), machine learning (ML) based neural-network quantum molecular dynamics (NNQMD), and super-state accelerated molecular dynamics (AMD) and kinetic Monte Carlo codes; thermal and electrical transport software; and design 3D architectures of LMs with desired functionality using scalable software. Distribution of software and data, and training: Software and simulation-experimental data generated within the Center are distributed to the materials science community via Berkeley Materials Project (MP) framework. We have also organized three workshops for software distribution and training at USC (Nov. 2017, Mar. 2018) and Gaithersburg, MD (Nov. 2018) to train researchers, with the last one in focused on underrepresented groups, in collaboration with Howard University which is one of the largest HBCUs. The Center supported a total of 46 personnel and 6 undergraduate students. These include 14 faculty, 11 postdoctoral research associates, 20 graduate research assistants, and mentored 6 undergraduate students. This resulted in the publications of 63 research papers that include 46 publications on Reactive and Quantum Dynamics Simulations, 13 publications on Machine Learning for Quantum Materials, and 4 publications on Quantum Computing.

2D Materials↗
DOE OSTI2023

Fermi-Level Engineering of Nitrogen Core-Doped Armchair Graphene Nanoribbons

Substitutional heteroatom doping of bottom-up engineered 1D graphene nanoribbons (GNRs) is a versatile tool for realizing low-dimensional functional materials for nanoelectronics and sensing. Previous efforts have largely relied on replacing C–H groups lining the edges of GNRs with trigonal planar N atoms. This type of atomically precise doping, however, only results in a modest realignment of the valence band (VB) and conduction band (CB) energies. Here, we report the design, bottom-up synthesis, and spectroscopic characterization of nitrogen core-doped 5-atom-wide armchair GNRs (N2-5-AGNRs) that yield much greater energy-level shifting of the GNR electronic structure. Here, the substitution of C atoms with N atoms along the backbone of the GNR introduces a single surplus π-electron per dopant that populates the electronic states associated with previously unoccupied bands. First-principles DFT-LDA calculations confirm that a sizable shift in Fermi energy (∼1.0 eV) is accompanied by a broad reconfiguration of the band structure, including the opening of a new band gap and the transition from a direct to an indirect semiconducting band gap. Scanning tunneling spectroscopy (STS) lift-off charge transport experiments corroborate the theoretical results and reveal the relationship among substitutional heteroatom doping, Fermi-level shifting, electronic band structure, and topological engineering for this new N-doped GNR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1984

Ion Engine With Solid-Electrolyte Ion Generator

Working fluid utilized efficiently. Working fluid positive ions conducted through solid electrolyte to outside, then accelerated in external electric field. While in solid-electrolyte material, ions do not recombine with electrons: transported to surface with high ionization efficiency. Provides new way to generate beam of ions for implantation in semiconductors or other applications.

Richter, R.↗
DOE OSTI2021

Semiconductor quantum dots: Technological progress and future challenges

In quantum-confined semiconductor nanostructures, electrons exhibit distinctive behavior compared with that in bulk solids. This enables the design of materials with tunable chemical, physical, electrical, and optical properties. Zero-dimensional semiconductor quantum dots (QDs) offer strong light absorption and bright narrowband emission across the visible and infrared wavelengths and have been engineered to exhibit optical gain and lasing. These properties are of interest for imaging, solar energy harvesting, displays, and communications. Here, we offer an overview of advances in the synthesis and understanding of QD nanomaterials, with a focus on colloidal QDs, and discuss their prospects in technologies such as displays and lighting, lasers, sensing, electronics, solar energy conversion, photocatalysis, and quantum information.

García de Arquer, F. Pelayo↗
DOE OSTI2024

Advanced Packaging Designs

The primary deliverable for this project will be to construct a power electronics package utilizing an organic, electrically insulating substrate material and demonstrate superior thermal performance and greater reliability under thermal cycling, thermal aging, vibration, power cycling, and electrical high-potential evaluation over traditional packages.

ENGINEERING↗
DOE OSTI2020

Energy considerations regarding pulsed arc production of nanomaterials

Atmospheric arc discharge volumes have been estimated from the light distribution emitted during evaporation of graphite and molybdenum disulphide (MoS 2 ) anodes. These data have been correlated to the peak power in the case of pulsed arc discharge held at different frequencies (1, 2 and 5 Hz). The measured power density values and the corresponding specific energies per particle have been compared to DC values, and showed that pulsed arc discharges deliver electrical power more efficiently than DC arc discharges do with yet lower thermal loads. In particular, the power density of ≈1 kW/cm 3 characteristic of pulsed arcs (10-20 kW/cm 3 in DC) suffices to provide 15 eV/particle to the arc plasma (≈10 eV/particle or less in DC). Such an energy balance resulted in high ionization rates of the ablated material and production yields of carbon nanotubes around 10 11 cm -2 kWh -1 . Lastly, in situ probe experiments showed that pulsed arcs enhance the transport to substrate of the generated nanoparticles, such as graphene and MoS 2 monolayers. Pulsed anodic arcs open the possibility to generate further nanomaterials thanks to a more rational power investment and a better control of the discharge region.

42 ENGINEERING↗
NASA NTRS2001

Life Cycle Tests on a Hollow Cathode Based Plasma Contactor

The propulsive Small Expendable Deployer System (ProSEDS) mission is designed to provide an on-orbit demonstration of the electrodynamic propulsion capabilities of tethers in space. The ProSEDS experiment will be a secondary payload on a Delta II unmanned expendable booster with a mission duration of 12 days. A 5-km conductive tether is attached to the Delta II second stage and collects current from the low Earth orbit (LEO) plasma, and a Hollow Cathode Plasma Contactor (HCPC) emits the collected electrons from the Delta II, completing the electrical circuit to the ambient plasma. The HCPC for the ProSEDS mission have made it necessary to turn off the HCPC once a minute throughout the entire mission. Because of the unusual operating requirements by the ProSEDS mission, an engineering development unit of the HCPC was built to demonstrate the HCPC design would start reliably for the life of the ProSEDS mission. During the life test the engineering unit cycled for over 10,000 on/off cycles without missing a single start, and during that same test the HCPC unit demonstrated the capability to emit 0 to 5 A electron emission current. The performance of the HCPC unit during this life test will be discussed.

Vaughn, Jason A.↗
DOE OSTI2021

First-principles study of electron transport in ScN

We investigate the conduction-band structure and electron mobility in rocksalt ScN based on density functional theory. The first-principles band structure allows us to obtain band velocities and effective masses as a function of energy. Electron-phonon scattering is assessed by explicitly computing the q-dependent electron-phonon matrix elements, with the inclusion of the long-range electrostatic interaction. The influence of free-carrier screening on the electron transport is assessed using the random phase approximation. We find a notable enhancement of electron mobility when the carrier concentration exceeds 10 20 cm -3 . We calculate the room-temperature electron mobility in ScN to be 587 cm2 /Vs at low carrier concentrations. When the carrier concentration is increased, the electron mobility starts to decrease significantly around n = 10 19 cm -3 , and drops to 240 cm 2 /Vs at n = 10 21 cm -3 . We also explore the influence of strain in (111)- and (100)-oriented ScN films. For (111) films, we find that a 1.0% compressive epitaxial strain increases the in-plane mobility by 72 cm 2 /Vs and the out-of-plane mobility by 50 cm 2 /Vs. For (100) films, a 1.0% compressive epitaxial strain increases the out-of-plane mobility by as much as 172 cm2 /Vs, but has a weak impact on the in-plane mobility. Our study sheds light on electron transport in ScN at different electron concentrations and shows how strain engineering could increase the electron mobility.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Magnetoelectronic phenomena due to quantum magnetization fluctuations

The goal of the project was to identify techniques to study magnetoelectronic phenomena such as spin transfer (ST) that stem from the quantum-mechanical nature of magnetization, and utilize them to characterize these quantum phenomena. The first such technique, electronic measurements based on the dependence of resistance on the population of spin-wave quanta (magnons) in a magnetic nanostructure, was shown by detailed measurements to be significantly influenced by the current-driven generation of a highly nonequilibrium phonon distribution by electrical current. This previously unrecognized phenomenon adds to the understanding of current-induced heating phenomena, qualitatively changes the methodology of analysis of current-induced heating common in scientific studies and engineering of current-carrying nanostructures. It benefits the public by providing a new direction for mitigation of Joule heating effects in electronic devices. The project also included quantum simulations of current-induced effects in magnetic nanostructures, which revealed that linear momentum and energy conservation are important for ST. Only angular momentum conservation was previously believed to be important. This finding is important for the fundamental understanding of ST, and for the design of efficient magnetoelectronic devices taking advantage of these conservation laws. Simulations also showed that non-classical ST is dominant in antiferromagnets, which will transform the understanding of ST in these systems. Finally, experimental studies of spin-transfer in ultrathin transition metal films revealed very large non-classical effects which were traced to the quantum origins of magnetism associated in the studied systems with the formation of an orbital liquid state. These findings i) transform the understanding of "conventional" transition-metal magnetism, ii) open a new field of studies in magnetism and a new method for the electronic control of magnetic properties and magnetism itself, and iii) provide a new approach to the development of efficient magnetoelectronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Surface engineering with oxidized Ti 3 C 2 T x MXene enables efficient and stable p-i-n-structured CsPbI 3 perovskite solar cells

All-inorganic CsPbI 3 perovskite has a near-ideal band gap, high thermal stability, and simple material composition, thus presenting a promising option for developing perovskite/Si tandem solar cells. However, CsPbI 3 undergoes a rapid phase transition under exposure to moisture and exhibits a significant performance gap relative to other perovskite compounds, particularly in the p-i-n structure favored for perovskite/Si tandems. In this work, we demonstrate highly efficient and stable p-i-n-structured CsPbI 3 perovskite solar cells by surface engineering the CsPbI 3 layer with oxidized Ti 3 C 2 T x MXene (OMXene) nanoplates via spray coatings. OMXene provides a physical barrier against moisture and improves charge separation at the perovskite-electron transporting layer interface via an enhanced electric field. Consequently, we demonstrated CsPbI 3 /OMXene-based p-i-n devices with efficiencies of 19.69% for 0.096-cm 2 cells and 14.64% for 25-cm 2 minimodules. The encapsulated minimodule showed good stability, retaining ~85% of the initial efficiency under simultaneous damp heat (85°C/85% relative humidity) and 1-sun light soaking for over 1,000 h.

14 SOLAR ENERGY↗
NASA NTRS1983

Fiberoptics technology and its application to propulsion control systems

Electro-optical systems have many advantages over conventional electrical systems. Among these are optics' insensitivity to electro-magnetic interference, good electrical isolation and the ability to make measurements in highly explosive areas without risk. These advantages promise to help improve the reliability of future aircraft engine control systems which will be entirely electronic digital. To improve the reliability of these systems, especially against lightning strikes, passive, optical, sensors and fiberoptic transmission lines are being considered for use in future engine systems. Also under consideration are actuators which receive their command signals over fiber optic cables. This paper reviews concepts used for optical instrumentation and actuation systems and discusses work being done by NASA Lewis Research Center in this area.

Baumbick, R. J.↗
DOE OSTI2021

Real time trajectory optimization for hybrid energy management utilizing connected information technologies

The disclosure is directed to solving a full trajectory optimization problem in real-time for a hybrid electric vehicle (HEV) such that future driving conditions and energy usage may be fully considered in determining optimal engine energy usage and battery energy usage in real-time during a trip. An electronic control unit of the HEV may be configured to: receive route information for a route to be driven by the HEV; and after receiving the route information, iterating the operations of: measuring a current state of charge (SOC) of the battery; using at least the measured SOC and an initial co-state value stored in a memory, performing a process to iteratively update the co-state value to obtain an updated co-state value; using at least the updated co-state value, computing an updated control value; and applying the updated control value to control a usage of the battery and the internal combustion engine.

Huang, Mike X.↗
DOE OSTI2025

Battery charging goes quantum

Rechargeable lithium-ion batteries power consumer electronics and electric vehicles, making them an essential component of the modern economy. Although lithium-ion battery technology has improved continuously over the past decades, widespread adoption of electrified transportation requires charging in less than 15 min to be competitive with internal combustion engines. As a battery charges and discharges, lithium ions travel across the electrode-electrolyte interface. The rate at which lithium ions transfer is dictated by the structure and physical properties of electrolytes and lithium-storing electrodes. Yet, the exact chemical reaction mechanism underlying the insertion of lithium ions at the electrode-electrolyte interface remains elusive. On page 46 of this issue, Zhang et al. (1) report experimental evidence that shows that lithium-ion battery charge and discharge occur through a coupled ion-electron transfer mechanism. Furthermore, this could establish an experimental and theoretical platform to extract key parameters for optimizing charge transfer rates in lithium-ion batteries.

Warburton, Robert E. [Case Western Reserve Univers↗
NASA NTRSDate not supplied

Recent Advancements in Electrical Capacitance Mass Gauging for Cryogenic PropellantTanks

The current lack of unsettled mass gauging is a key roadblock for many space activities, such as orbital refueling, missions to the Moon and Mars, and nuclear thermal and nuclear electric propulsion technologies. Liquid can form any one of an infinite number of configurations in microgravity, such as floating in globs or accumulating on tank surfaces in discontiguous volumes, or both. Capacitive sensing requires no moving parts and dissipates close to zero heat, making it an ideal candidate for cryogenic fluid mass gauging in settled and unsettled configurations. Capacitive sensing has a history of proven use in space propellant tanks, including tanks on the space shuttle, Saturn V, and the Apollo Lunar Excursion Module. Modern capacitive sensor technology allows using the entire tank as the capacitor volume by placing electrodes on the tank walls and propellant management surfaces. Capacitance is directly related to density, and therefore to mass for fixed volumes. In this presentation, we discuss the concepts behind whole-tank capacitance mass gauging and associated engineering challenges. We describe recent efforts to develop a micro-g unsettled cryogenic mass gauge using whole-tank capacitance sensing, including the development of test beds, electronics, and algorithms. We describe several mathematical processing techniques, including empirical-based averaging, electrical capacitance volume tomography, and spatial regularization. A modeling study, performed using settled configurations in gravity and no gravity, and with a set of 100 random fluid configurations, has indicated that spatial regularization, in which capacitance measurements are weighted to account for non-uniform electric fields, yields a mass fraction accuracy of 8% for any fluid configuration. Such a sensor is expected to operate in real time with a sampling frequency of at least 1 kHz.

cryogenic↗