Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BRITTLENESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Fabrication, microstructure and mechanical properties of W-NiTi composites

Here, new two-phase tungsten-based composites containing 88 wt% tungsten powders and 12 wt% nearly equiatomic NiTi alloy deforming by martensite variant detwinning were fabricated by infiltration and hot pressing in this study. The change of Ti/Ni ratio in NiTi mater alloy and the effect of addition of Nb element on the microstructure, martensitic transformation and mechanical properties of W-NiTi composites were investigated by comparison of W-Ni 50 Ti 50 , W-Ni 44 Ti 56 , W-Ni 42 Ti 58 and W-Ni 42 Ti 53 Nb 5 composites. The results showed that brittle Ni 3 Ti formed in the W-Ni 50 Ti 50 and W-Ni 44 Ti 56 composites and brittle Ti 2 Ni formed in the W-Ni 42 Ti 58 composites while no brittle intermetallics formed in the W-Ni 42 Ti 53 Nb 5 composite. The W-Ni 42 Ti 53 Nb 5 composite exhibited the sharpest martensitic transformation with the largest transformation enthalpy among the four different composites. The W-Ni 42 Ti 53 Nb 5 composite exhibited a double-yielding phenomenon under compression with an ultimate compressive strength of 3820 MPa and a deformation of 50.4%. In-situ synchrotron high-energy Xray diffraction measurements revealed the first yielding was caused by the martensite reorientation of the NiTi matrix and the second was due to the commencement of massive plastic deformation of the reoriented martensite and is also attributed to the microscopic internal fracturing of the W particles.

36 MATERIALS SCIENCE↗

Ductility evaluation of nitrided Zircaloy-4 cladding by ring compression testing

Here, this study evaluated the embrittlement of Zircaloy-4 cladding by dry air and dry nitrogen environments as a function of process temperature and duration of exposure. A Netzsch thermogravimetric analyzer was used to measure the mass gain of cladding sections over time with specified temperature and gas flow programs. Oxidation of Zircaloy in dry air produced a brittle ZrO 2 layer with ductile unreacted metal. In contrast, nitridation of Zircaloy had a slower reaction rate but produced a brittle cladding that was more easily breached during ring compression tests. The ring compression tests demonstrated that ductility of Zircaloy cladding decreases as nitrogen pickup increases; a ductile-to-brittle transition occurs near a mass gain of 2.1 wt %. Nitridation showed minimal temperature dependency in ductility degradation, whereas oxidation showed significant temperature dependency in ductility degradation, with severe embrittlement occurring at 1200 °C. Optical micrographs confirmed the formation of uniform ZrN layers (approximately 12 µm thick) on the cladding surface, indicating that cladding embrittlement is primarily the result of nitrogen diffusion rather than metal layer thinning.

36 MATERIALS SCIENCE↗

High-temperature strengthening mechanisms of Laves and B2 precipitates in a novel ferritic alloy

Precipitates of the Laves and B2 phases were engineered in a newly-designed advanced ferritic alloy. Under creep test at 650 °C with 120 MPa, the material showed a steady-state minimum creep rate of 1 × 10 –4 h –1 , about one order of magnitude lower than T91. Microstructural characterization of the ferritic alloy revealed primarily ductile and partially brittle fractures after the creep test. Coarse Laves phase (~ 1 µm) was observed associating with the brittle fracture, resulting in reduced creep ductility. However, fine Laves phase precipitates (~ 100 nm) helped the dimple-ductile fracture and strengthened the material through impeding the motion of dislocations and boundaries. Unlike the B2 precipitates remained coherent exerting the classic Orowan bypassing mechanism at the brittle location, some of the B2 precipitates at the ductile location became incoherent and can develop an attractive interaction with dislocations. In conclusion, this coherency change of B2 precipitates, together with the nucleation of ultrafine (~ 40 nm) Laves phase precipitates during the creep test, would compensate for the coarsening-induced loss of Orowan strengthening of coherent B2 precipitates.

36 MATERIALS SCIENCE↗

Reducing waste of the hydride-dehydride process for U-6 wt% Nb spherical powders through lower impact and targeted milling

The breakdown of solid metal into powder during the hydride-dehydride process is commercially important for the formation of titanium and other metal powders. Typically, the milling of the brittle hydride powder occurs in a ball mill, where milling media impacts powder particles to break them down. The milling media can impact particles that are larger than desired, as desired, or smaller than desired, indiscriminately making all particles smaller. In this work, we investigate how to minimize waste powder production during milling using two different milling methods, planetary ball milling and milling in a sieve shaker (sieve-milling). Both processes yielded similar amounts of 20–75 μm diameter powder (the target size range); however, sieve-milling generated a significantly smaller amount of undersized waste powder. The powders were characterized by X-ray diffraction, SEM/STEM, and magnetic susceptibility. Several differences between ball milling and sieve-milling processes are discussed. We then conclude that the decreased yield of undersized powder in sieve-milling was due to a combination of lower impact energy in sieve-milling, unreacted metallic cores in the hydride flakes, and the ability to mill target particle sizes during sieve-milling. While these results are from the milling of brittle hydride powder, similar methods may be applicable to other brittle powders, including ceramics or salts.

Chemistry↗

The Effects of Earthquakes and Fluids on the Metamorphism of the Lower Continental Crust

Rock rheology and density have first-order effects on the lithosphere's response to plate tectonic forces at plate boundaries. Changes in these rock properties are controlled by metamorphic transformation processes that are critically dependent on the presence of fluids. At the onset of a continental collision, the lower crust is in most cases dry and strong. However, if exposed to internally produced or externally supplied fluids, the thickened crust will react and be converted into a mechanically weaker lithology by fluid-driven metamorphic reactions. Fluid introduction is often associated with deep crustal earthquakes. Microstructural evidence, suggest that in strong highly stressed rocks, seismic slip may be initiated by brittle deformation and that wall-rock damage caused by dynamic ruptures plays a very important role in allowing fluids to enter into contact with dry and highly reactive lower crustal rocks. The resulting metamorphism produces weaker rocks which subsequently deform by viscous creep. Volumes of weak rocks contained in a highly stressed environment of strong rocks may experience significant excursions toward higher pressure without any associated burial. Slow and highly localized creep processes in a velocity strengthening regime may produce mylonitic shear zones along faults initially characterized by earthquake-generated frictional melting and wall rock damage. However, stress pulses from earthquakes in the shallower brittle regime may kick start new episodes of seismic slip at velocity weakening conditions. These processes indicate that the evolution of the lower crust during continental collisions is controlled by the transient interplay between brittle deformation, fluid-rock interactions, and creep flow.

58 GEOSCIENCES↗

High damage tolerance of electrochemically lithiated silicon

Mechanical degradation and resultant capacity fade in high-capacity electrode materials critically hinder their use in high-performance rechargeable batteries. Despite tremendous efforts devoted to the study of the electro–chemo–mechanical behaviours of high-capacity electrode materials, their fracture properties and mechanisms remain largely unknown. In this paper, we report a nanomechanical study on the damage tolerance of electrochemically lithiated silicon. Our in situ transmission electron microscopy experiments reveal a striking contrast of brittle fracture in pristine silicon versus ductile tensile deformation in fully lithiated silicon. Quantitative fracture toughness measurements by nanoindentation show a rapid brittle-to-ductile transition of fracture as the lithium-to-silicon molar ratio is increased to above 1.5. Molecular dynamics simulations elucidate the mechanistic underpinnings of the brittle-to-ductile transition governed by atomic bonding and lithiation-induced toughening. Finally, our results reveal the high damage tolerance in amorphous lithium-rich silicon alloys and have important implications for the development of durable rechargeable batteries.

25 ENERGY STORAGE↗

Optimization of the Reax force field for the lithium–oxygen system using a high fidelity charge model

Studies using molecular dynamics (MD) have long struggled to simulate the failure modes of materials, predicting unrealistically high ductility and failing to capture brittle fracture. The primary cause of this shortcoming is an inadequate description of bond breaking. While reactive force fields such as ReaxFF show improvements compared to traditional force fields, the charge models used yield unphysical partial charges, especially during dissociation of ionic bonds. This flaw may be remedied by using the atom-condensed Kohn–Sham density functional theory (DFT) approximated to a second order (ACKS2) charge model for determining partial charges. In this work, we present a new ACKS2-enabled Reax force field for fracture simulations of lithium oxide systems, which was obtained by training against an extensive set of DFT, multireference configuration interaction (MRCI), and MRCI+Q reference data using genetic optimization techniques. This new force field significantly improves the bond breaking behavior, but still cannot fully capture the brittle fracture in MD simulations, suggesting more research is needed to improve simulation of brittle fracture.

36 MATERIALS SCIENCE↗

Relationships between lineal fracture intensity and chemical composition in the Marcellus Shale, Appalachian Basin

Within mudrock reservoirs, brittle zones undergo failure during hydraulic stimulation, creating numerous artificial fractures which enable hydrocarbons to be liberated from the reservoir. Natural fractures in mudrock reduce the tensile strength of the host rock, creating planes of weaknesses that are hypothesized to be reactivated during hydraulic stimulation. Combined, brittleness and natural fractures contribute to creating more abundant and complex fracture networks during hydraulic stimulation. Research efforts toward quantifying rock brittleness have resulted in numerous mineral-/compositional-based indices, which are used during petrophysical analysis to predict zones most conducive to hydraulic stimulation. In contrast, investigations on the relationship between chemical composition and core-scale natural fractures are limited. For this study, we collected high-resolution energy-dispersive X-ray fluorescence (XRF) data, calibrated with a wave-dispersive XRF, from a Marcellus Shale core. Additionally, we characterized corescale natural fractures in terms of length, width, in-filling material or lack thereof, and orientation. Following the characterization, we transformed the natural fracture data into a continuous P10 (lineal fracture intensity) curve, expressed as the number of fractures per a one-half foot window. Using these data sets, we investigated the relationship between rock composition and natural fracture intensity. Regression analyses recorded positive relationships between natural fracture intensity and calcium, silicon/aluminum, and total organic carbon (TOC), and negative relationships with silicon and aluminum. Aluminum recorded the strongest (negative) relationship ([Formula: see text]) with natural fracture intensity. To access the degree to which natural fractures can be predicted based on chemical composition, we applied a partial least-squares analysis, a multivariate method, and recorded an [Formula: see text]. Our study illustrates that although numerous factors are responsible for natural fracture genesis, such fractures predictively concentrate in areas of similar chemical composition, largely in zones with low aluminum concentrations.

Geochemistry & Geophysics↗

Revealing the ductility of nanoceramic MgAl 2 O 4

Ceramics are strong but brittle. As stated in classical theories, ceramics are brittle mainly because dislocations are suppressed by cracks. Here, the authors report the combined elastic and plastic deformation measurements of nanoceramics, in which dislocation-mediated stiff and ductile behaviors were detected at room temperature. In the synchrotron-based deformation experiments, a marked slope change is observed in the stress–strain relationship of MgAl 2 O 4 nanoceramics at high pressures, indicating that a deformation mechanism shift occurs in the compression and that the nanoceramics sample is elastically stiffer than its bulk counterpart. The bulk-sized MgAl 2 O 4 shows no texturing at pressures up to 37 GPa, which is compatible with the brittle behaviors of ceramics. Interestingly, substantial texturing is seen in nanoceramic MgAl 2 O 4 at pressures above 4 GPa. The observed stiffening and texturing indicate that dislocation-mediated mechanisms, usually suppressed in bulk-sized ceramics at low temperature, become operative in nanoceramics. This makes nanoceramics stiff and ductile.

36 MATERIALS SCIENCE↗

Effective Exploration of New 760°C-Capability Steels for Coal Energy

Cost effective and high performance alloys that are capable of operating at 760 °C or higher for extended periods of time under a very aggressive environment are critically required for the design and development of advanced ultrasupercritical (AUSC) boilers and steam turbines. Finely dispersed Laves phase precipitates have been shown by Takeyama and co-workers to be a viable strengthening mechanism in high temperature austenitic steels. There is currently no straightforward theory that can predict what other intermetallic phases can serve as potent precipitation-strengthening phases for steels; thus we employed a highly effective dual-anneal diffusion multiple (DADM) approach to screen for viable strengthening precipitates over a wide range of compositions. From the Fe-Co-Cr-Ni-Mo DADMs, the Fe-Cr-Mo based Chi phase was identified as a new strengthening phase for high temperature ferritic steels; and from the Fe-Mn-Cr-Nb-Ni-Mo-FeAl DADMs, the Laves phase was identified as a viable strengthening precipitate in Fe-Mn and Fe-Ni based austenitic steels. After identification of viable strengthening phases from the DADMs that covered compositions in the basic ternary and quaternary systems, we employed computation thermodynamics to perform multicomponent alloy design and optimization. For the new the Chi-phase strengthened steels, we performed thermodynamic calculations to vary the volume fraction of the Chi phase and introduced Nb and carbon to promote the formation of stable carbides for grain size control during solution heat treatment. For the Fe-Ni-Mn based austenitic steels, we performed extensive parametric optimization of compositions in order to reduce the expensive Ni content, add Cr and Al for oxidation resistance, and balance the alloying contents (Ni, Mn, Cr, Al, Mo) to suppress the ferritic phase and promote the austenitic matrix phase. Four steels (two ferritic + two austenitic) were designed and tested. The two Chi-phase strengthened ferritic steels exhibited excellent oxidation resistance and good creep-rupture strength at moderate temperatures, considering their ferritic matrix that usually results in lower creep resistance than austenitic steels. These steels showed brittleness and sample-to-sample variability in ductility. The low ductility might be due to the macro segregation during solidification or the significant grain growth during the solution heat treatments. We believe there is no inherent brittleness based on the chemistry of the steels. The creep-rupture performance of the steels is comparable to the 9Cr steels. Due to their ferritic matrix, the new Chi-phase strengthened ferritic steels may not be suited for the 760 °C AUSC applications, but they are very good candidates for intermediate temperature applications due to their outstanding oxidation resistance and high strength. Further study is required to find the source of low and highly variable ductility. We believe the compositions of the Chi-phase strengthened steels are not inherently brittle. The Chi-phase strengthened ferritic steels may also be excellent candidates for intermediate-temperature and room-temperature cast stainless steels, thus we highly recommend further investigations. The two Mn-containing austenitic steels based on the Laves phase showed good ductility, excellent oxidation resistance (slightly inferior to the two ferritic steels) at high temperatures and moderate creep strength. The creep-strength of the two austenitic steels based on the Larson-Miller parameters is higher than that of the traditional 316 stainless steels, but lower than the alumina-forming alloys (AFAs) developed at Oak Ridge National Laboratories. We do not recommend high priority in further studying these compositions unless higher Cr alloys are required for hot-corrosion resistance.

01 COAL, LIGNITE, AND PEAT↗

Fracture Toughness Evaluation for Spent Nuclear Fuel Clad Systems Using Spiral Notch Torsion Fracture Toughness Test

Many radioactive materials within the nuclear fuel cycle present a significant hazard. Such materials include spent nuclear fuel, high-level waste, legacy waste and other nuclear materials. These materials are often held in long-term storage as an interim stage within their lifecycle, including reuse or disposal. Safety and security of spent nuclear fuel (SNF) interim storage installations and follow-on SNF transportations to its final repository sites are very important, due to a great concentration of fission products, actinides and activation products. Fracture mechanics approach in applying to SNF system reliability investigation, especially for the high burn up (HBU) SNF, during SNF long term dry storage or SNF transportation is necessary due to the inherited flaws and inhomogeneity structures existed in a SNF system from the reactor operation. For instance, such as hydride and oxide formation, surface flaw induced by SNF assembly contact interactions, or internal flaws induced by pellet-clad mechanical interaction (PCMI). However, none of the existing fracture toughness data deal with fuel cladding specific geometry or SNF material conditions, such as cladding structure with the segment fuel pellets configuration and the PCMI mechanism. Consequently, the application of existing fracture toughness data to SNF system reliability investigation can be error prone; thus, the development of an industry-wide consensus fracture mechanics approach is needed. The objective of this research is to develop an in-situ fracture mechanics testing protocol, including the associated analytical procedure, that is suitable for evaluating the SNF fracture toughness. Fracture toughness data was obtained under quasi-static fracture loading using Oak Ridge National Laboratory (ORNL) developed Spiral Notch Torsion Test (SNTT) technology carried out on a biaxial tension/torsion tester. These data will be used to support SNF reliability investigation during long-tern SNF dry storage stage or in the follow-on SNF system transport to the final repository sites. SNTT has been a recent breakthrough in measuring fracture toughness for different materials, including metals, ceramics, concrete and polymers composites. Due to its high geometry constraint and unique loading condition, SNTT can be used to measure the fracture toughness with smaller specimens without concern of size effects. The application of SNTT to brittle materials has been proved to be successful. The micro-cracks induced by original notches in brittle materials could ensure crack growth in SNTT samples. Therefore, no fatigue pre cracks are needed for brittle materials specimens. The application of SNTT to the ductile material to generate valid toughness data will require a test sample with sufficient pre-crack length to increase the sample localized constraint at crack front. Fatigue pre-crack growth techniques with the associated compliance function estimated was developed for estimating the crack penetration depth to monitor the fatigue crack growth evolution. In order to extend SNTT approach to a thin shell cladding structure material, a new testing protocol and the associated analytical procedure for estimating the SNF fracture toughness was developed. The detailed SNTT approach and its estimated fracture toughness for the Zr-4 cladding structure with segment alumina inserts are presented in this report. The SNTT test results indicate that SNTT method is a reliable test approach with good repeatability in applying to Zr-4 cladding material. For the medium and the short crack length, the estimate J Q upon fracture for the baseline Zr-4 cladding is at 285.7 lb/in with 2-sigma uncertainty of 18.59 lb/in., and the associated K Q is at 61.4 Ksi√in. For a long crack length, the crack initialization orientation is apparently deviated from the principle tensile stress contour – 45° spiral crack front (i.e., Mode I + Mode III failure mechanism); and the estimated J Q is at 108 lb/in., the associated K Q is at 37.7 Ksi√in. The estimate Mode I J Q (along the 45° pitch principle tensile stress contour) is at 200 lb/in.; which indicate a significant reduction in the fracture toughness in a tubing structure under mixed mode loading condition, Mode I + Mode III, compared to that of Mode I (tensile stress dominated) alone.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Using Artificial Microstructures to Understand Microstructure Property Relationship-Toughening Mechanisms in Metallic Glass (Final Report)

Metallic glasses are a new class of structural materials which exhibit exciting mechanical properties including high strength and elasticity. In terms of fracture toughness, the material class of metallic glasses spans a wide range; Some metallic glasses are extremely brittle and exhibit near ideal brittle behavior whereas others can be exceptional tough with values comparable to the toughest metals out there. Such large range of observed fracture toughness within the material class of metallic glasses is surprising as they have seemingly a very similar atomic structure. Therefore, we developed “artificial microstructures” which allows to decouple the various contribution of sample geometry, imperfection and structure. Specifically, we decouple variations in the alloys’ chemical composition and the atomic structure and quantified the resulting fracture toughness. Atomic structure of a metallic glass can be modified by the fictive temperature. The fictive temperature of a glass is the temperature at which the liquid metallic glass falls out of equilibrium upon colling and forms a glass. Upon further cooling the structure is maintained only thermal oscillations decrease due to a lower absolute temperature. We found that the effect of fictive temperature (same chemistry, different structural stages of the glass) is comparable to the variations of fracture toughness when the chemistry is varied. Hence, it appears that the subtle differences in the glass structure are responsible for the large range of fracture toughness’s observed. Our results reveal that fracture toughness within the material class of metallic glasses varies significantly and we found some example alloys with exceptional high resistance to fracture and others that are almost ideally brittle. Significant influences on the fracture toughness have the structure of the glass, its chemistry, and some imperfections in the structure.

36 MATERIALS SCIENCE↗

Techniques for lithium removal from 1040 C aged tantalum alloy, T-111

The liquid ammonia and vacuum distillation techniques were found to be satisfactory for removing lithium from 1040 C aged T-111 (tantalum - 8-percent tungsten- 2-percent hafnium). Results of ductility tests and chemical analysis show that these two methods are adequate for removing lithium without embrittlement or contamination of the T-111. Moist air exposure of T-111 with traces of lithium on the surface produced mixed results. Some specimens were ductile; others were brittle. Brittle T-111 had an increased hydrogen content. Water removal of lithium from T-111 caused brittleness and an increased hydrogen concentration.

Gahn, R. F.↗

Recrystallization and grain growth in NiAl

Aluminide intermetallics, because of their strength, microstructural stability, and oxidation resistance at elevated temperatures, represent potential structural materials for use in advanced energy conversion systems. This inherent potential of the intermetallics can currently not be realized in connection with the general brittleness of the materials under ambient conditions. It is pointed out, however, that brittleness is not an inherent characteristic. Single crystals are ductile and polycrystals may be, too, if their grains are fine enough. The present investigation is concerned with an approach for reducing material brittleness, taking into account thermal-mechanically induced grain refinement in NiAl, a B2 aluminide which melts at 1638 C and which retains complete order to its melting point. Attention is given to the kinetics of recrystallization and grain growth of warm-worked, nickel-rich material.

Haff, G. R.↗

Tectonic determinations of lithospheric thickness on Ganymede and Callisto

The concept of the Maxwell time of a viscoelastic material (4.5) is used in conjunction with calculated thermal profiles to evaluate the significance of tectonic estimates of lithospheric thickness. Thermal lithospheric thicknesses provide fundamental constraints on planetary thermal histories that complement the constraints provided by dateable surface deposits of endogenic origin. Lithospheric constraints are of particular value on the icy satellites where our understanding of both rheology and surface ages is considerably poorer than it is for the terrestrial planets. Certain extensional tectonic features can and have been used to estimate lithospheric thicknesses on Ganymede and Callisto. These estimates, however, refer to the depth of the elastic lithosphere defined by the zone of brittle failure. The relation between the elastic lithosphere and the thermal lithosphere (generally defined by the zone of conductive heat transport) is not straightforward, because the depth of brittle failure depends not only on the thermal profile, but also on rheology and strain rate (or the characteristic time over which stresses build towards failure). Characteristic time considerations are not trivial in this context because stresses generating brittle failure on the icy satellites may be produced by impacts, with characteristic times of seconds to days, or by geologic processes with time scales of hundreds of millions of years.

Croft, S. K.↗

Vertical averages of rheology of the continental lithosphere Relation to thin sheet parameters

The calculations of the vertically-integrated strengths of the lithosphere and the Agrand number are described. The crustal and mantle contributions to the vertically-integrated strength, which is approximated from the brittle layer, and the depth and stress difference at the brittle-ductile transtion, is examined. The effective power laws for vertically-integrated rheology, which are dependent on the thermal stability of the lithosphere and the depth to the brittle-ductile transition in the crust, are studied. The relationship between the Agrand number and vertically-integrated strengths of the lithosphere and the thermal regime of the uppermost mantle and the stress state in the upper crust is analyzed.

Sonder, L. J.↗

Structural ceramics in heat engines - The NASA viewpoint

The interest of NASA in the application of ceramics in heat engines is reviewed. This interest started in the early 1950s with attempts to apply oxides, borides, and cermets as gas turbine components. These attempts, as other similar efforts around the world at that time, generally met with failure due to the brittle nature of the materials and a lack of understanding of how to accommodate brittleness by appropriate design approaches. More recent efforts of the 1970s have concentrated on the silicon nitride and silicon carbide family of ceramics. This class of materials demonstrated thermal stability and thermal shock resistance in gas turbine environments. Subsequent programs funded by the DOE and managed by NASA have demonstrated great strides in material fabricability and the application of FEM design concepts. However, the materials remain brittle and lacking in reliability and reproducibility. This reliability/reproducibility problem is viewed as the major current impediment to the application of ceramics in heat engines; approaches to its solution are discussed.

Probst, H. B.↗

Indentation plasticity and fracture in silicon

Measurements of the ductile-brittle transition temperature of heavily doped silicon were carried out using indentation techniques. Diamond pyramid hardness tests were performed on the (100) face of heavily doped N-type and P-type and intrinsic silicon single crystals. Tests were performed over the range 200 C to 850 C and loads of 100 to 500 g were used. Samples were subsequently etched to reveal dislocation rosettes produced by indentation. Intrinsic silicon underwent a ductile-brittle transition at 660 C, P-type at 645 C and N-type at 625 C. Hardness values varied from 1.1 GPa at 700 C to 11.7 GPa at 200 C. Significant effects of hardness on doping were present only at the highest temperatures. Lower loads generally produced higher hardness but load did not affect the Ductile-Brittle Transition Temperature (DBTT). Fracture toughness values ranged from 0.9 MPa m(1/2) at 200 C to 2.75 MPa m(1/2) near the DBTT. Doping did not affect the fracture toughness of silicon. P-type doping increased the size of dislocation rosettes observed after indentation, but N-type did not, in contradiction of the expected results. Results are discussed in terms of the effect of doping on the dislocation mobility in silicon.

Rybicki, George C.↗