Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “composite matrix”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Optimization of matrix viscosity improves polypropylene fiber dispersion and properties of engineered cementitious composites

Engineered cementitious composites (ECC) is a durable cementitious material with high tensile ductility and strain-hardening characteristics. Although considered as a cost-effective fiber for ECC, polypropylene (PP) fiber is reportedly difficult to disperse in mortar matrix due to its high aspect ratio and hydrophobicity. In this study, the matrix viscosity of a low-carbon ECC based on limestone calcined clay cement was tailored as a variable to improve PP fiber dispersion under a pre-determined mixing protocol. The effect of matrix viscosity on the composite fresh and hardened properties was investigated experimentally. Results suggested an optimal range of matrix viscosity (10.3–11.5 Pa . s) favors the composite tensile strength and strain capacity at 28 days. At the optimal state with a 0.1 % viscosity modifying admixture (VMA)-to-binder mass ratio, PP-ECC achieved 7.0 % tensile strain capacity and 3.5 MPa ultimate tensile strength. When matrix viscosity falls outside the desired range, both ultimate tensile strength and strain capacity were diminished. By tailoring the VMA dosage, the matrix viscosity can be adjusted for desired fiber dispersion, workability, and mechanical properties. Finally, the findings of this study provide a technical reference for the practical design and application of PP-ECC.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Microstructural development in DED stainless steels: applying welding models to elucidate the impact of processing and alloy composition

Austenitic stainless steel microstructures produced by directed energy deposition (DED)are analogous to those developed during welding, particularly high energy density welding. To better understand microstructural development during DED, theories of microstructural evolution,which have been established to contextualize weld microstructures, are applied in this study to microstructural development in DED austenitic stainless steels. Phenomenological welding models that describe the development of oxide inclusions, compositional microsegregation, ferrite,matrix austenite grains, and dislocation substructures are utilized to clarify microstructural evolution during deposition of austenitic stainless steels. Two different alloys, 304L and 316L, arecompared to demonstrate the broad applicability of this framework for understanding microstmctural development during the DED process. Despite differences in grain morphology and solidification mode for these two alloys (which can be attributed to compositional differences),similar tensile properties are achieved. It is the fine-scale compositional segregation and dislocation structures that ultimately determine the strength of these materials. The evolution of microsegregation and dislocation structures is shown to be dependent on the rapid solidification and thermomechanical history of the DED processing method and not the composition of the starting material.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Polymer-ceramic composite electrolytes for all-solid-state lithium batteries: Ionic conductivity and chemical interaction enhanced by oxygen vacancy in ceramic nanofibers

Perovskite Li 3x La 2/3-x TiO3 (LLTO) nanofibers have been heat-treated in the hydrogen-containing atmosphere and then incorporated with the poly(vinylidene fluoride)-co-hexafluoropropylene (PVDF-HFP) polymer to form a composite electrolyte. Hydrogen treatment has created oxygen vacancies in the LLTO nanofibers, which has reduced the activation energy of Li ion transport along intra-grains and inter-grains, leading to improvement in the ion conductivity of LLTO nanofibers. Hydrogen treatment of the LLTO nanofibers has also enhanced the chemical interaction between the LLTO nanofibers and the polymer matrix in the composite electrolyte, and favored the Li ion transport at the nanofiber/polymer interface, improving the ion conductivity of the composite electrolyte to 3.4×10- 4 S/cm at room temperature. As a result, the Li|composite-electrolyte|Li half-cell exhibits good stability during lithium plating/stripping cycling at room temperature, showing an overpotential of ~91 mV at a constant current density of 0.5 mA/cm 2 . Finally, the full-cell battery with the composite electrolyte, lithium metal anode and lithium iron phosphate cathode shows excellent rate capacity and cycling performance.

25 ENERGY STORAGE↗
DOE OSTI2021

Cell Wall Compositions of Sorghum bicolor Leaves and Roots Remain Relatively Constant Under Drought Conditions

Renewable fuels are needed to replace fossil fuels in the immediate future. Lignocellulosic bioenergy crops provide a renewable alternative that sequesters atmospheric carbon. To prevent displacement of food crops, it would be advantageous to grow biofuel crops on marginal lands. These lands will likely face more frequent and extreme drought conditions than conventional agricultural land, so it is crucial to see how proposed bioenergy crops fare under these conditions and how that may affect lignocellulosic biomass composition and saccharification properties. We found that while drought impacts the plant cell wall of Sorghum bicolor differently according to tissue and timing of drought induction, drought-induced cell wall compositional modifications are relatively minor and produce no negative effect on biomass conversion. This contrasts with the cell wall-related transcriptome, which had a varied range of highly variable genes (HVGs) within four cell wall-related GO categories, depending on the tissues surveyed and time of drought induction. Further, many HVGs had expression changes in which putative impacts were not seen in the physical cell wall or which were in opposition to their putative impacts. Interestingly, most pre-flowering drought-induced cell wall changes occurred in the leaf, with matrix and lignin compositional changes that did not persist after recovery from drought. Most measurable physical post-flowering cell wall changes occurred in the root, affecting mainly polysaccharide composition and cross-linking. This study couples transcriptomics to cell wall chemical analyses of a C4 grass experiencing progressive and differing drought stresses in the field. As such, we can analyze the cell wall-specific response to agriculturally relevant drought stresses on the transcriptomic level and see whether those changes translate to compositional or biomass conversion differences. Our results bolster the conclusion that drought stress does not substantially affect the cell wall composition of specific aerial and subterranean biomass nor impede enzymatic hydrolysis of leaf biomass, a positive result for biorefinery processes. Coupled with previously reported results on the root microbiome and rhizosphere and whole transcriptome analyses of this study, we can formulate and test hypotheses on individual gene candidates’ function in mediating drought stress in the grass cell wall, as demonstrated in sorghum.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Cyclic olefin copolymer-based reinforced anion exchange membranes for water electrolyzers

Anion exchange membranes (AEMs) have emerged as a promising technology for water electrolysis in hydrogen production since they offer significant cost reduction in choices of electrocatalysts and bipolar plates. However, AEMs satisfying multiple requirements of high ionic conductivity, good chemical stability, robust mechanical properties, scalable synthesis, and low manufacturing costs are rare. Herein, we introduce quaternary ammonium functionalized cyclic olefin copolymers (COCs) as a new class of chemically stable and low-cost AEM materials. To further enhance the mechanical robustness, we prepared reinforced composite AEMs by impregnating the ionically functionalized COC into a mechanically robust matrix. The resulting reinforced composite membrane exhibits a high hydroxide conductivity of 127 mS cm −1 and excellent mechanical strength. In water electrolyzers, the MEA demonstrated outstanding performance, achieving a current density of 2.24 A cm −2 at 1.8 V, attributable to high conductivity, enhanced mechanical properties, and good alkaline stability of the composite membrane. These results indicate that the COC-based AEMs demonstrate good potential for application in AEM electrolyzers.

08 HYDROGEN↗
DOE OSTI2020

Atomistic study of silicon alloying in the spallation behavior of nanocrystalline aluminum systems

Here, the effect of concentration of the alloying element silicon (Si) on the shock and spall response of aluminum (Al) is studied using classical molecular dynamics (MD) simulations. Silicon is distributed as individual grains and as grain boundaries and the dynamic response under shock is studied for an impact velocity of 1000 m/s. A general trend observed here is that the spallation is almost exclusively intergranular and limited to Al-Si interfaces. The spall strengths are observed to a) decrease with an increase in alloying of Si as grains and b) show little increase for up to 50% grain boundary segregation. An increase in grain size of the whole system showed negligible differences in spall strength, highlighting the significance of concentration of the alloying species rather than its grain size. These results provide an atomistic understanding of light-weight metallic systems under shock compression and pave the way for designing multiphase metal matrix alloys and composites for defense/armor applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Developing the Science Basis for Understanding Polymer Encapsulant Degradation Mechanisms: DuraMAT 2.0 Final Project Report

Polymeric encapsulants are essential materials in photovoltaic modules, protecting sensitive electronics from the environment while providing mechanical integrity to the multilayered assembly. However, these polymeric materials are susceptible to degradation processes driven by the ingress of environmental species, ultraviolet radiation, thermal stresses, and mechanical loading. In this study, we employ a combined atomistic simulation and accelerated aging experimental approach to study the molecular-scale mechanisms of encapsulant degradation. Classical molecular dynamics simulations quantify the diffusion of environmental and degradation species through the polymer matrix, producing composition-specific diffusion coefficients. Reactive simulations characterize activation energy barriers and reaction rate constants for key chemical pathways. In parallel, thermal-desorption analyses coupled with mass spectrometry monitor the emergence and concentration profiles of degradation products under controlled stressor conditions. By integrating simulation and experiment, we establish quantitative correlations between polymer composition, species diffusivity, and chemical reactivity. We anticipate that these relations and quantitative values could serve as high-fidelity inputs to reaction-diffusion models, enabling physics-informed lifetime predictions and guiding the design of more durable encapsulant materials for solar energy applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Gluonic Structure from Instantons

The instanton vacuum provides an effective description of chiral symmetry breaking by local topological fluctuations of the gauge fields, as observed in lattice QCD simulations. The resulting effective dynamics at momenta below 1/$\bar{ρ}$ ≈ 0.6 GeV explains the basic features of light-quark correlation functions and is used extensively in studies of hadron structure. The instanton fields also make definite contributions to the gluonic structure of light hadrons, as expressed in the matrix elements of composite quark– gluon or gluon operators. The article reviews the gluonic structure of light hadrons (nucleon, pion) induced by instantons. This includes: (i) twist-2 parton distributions and momentum sum rule; (ii) twist-3 angular momentum and spin-orbit interactions; (iii) twist-3 and twist-4 quark–gluon correlations and power corrections; (iv) trace anomaly and hadron mass decomposition; (v) scalar gluon form factors and mechanical properties; (vi) axial anomaly and pseudoscalar gluon form factors. It also discusses possible further applications of the methods and recent developments including gauge field configurations beyond instantons.

Weiss, C. [Thomas Jefferson National Accelerator F↗
DOE OSTI2022

Refractory solar selective coatings

Selective receiver coatings provide high performance for concentrated solar power applications. The solar selective coating provides high solar absorptivity (90% or greater) with low IR emissivity (0.1 or less) while maintaining stability at temperatures greater than 700° C. The coating comprises a composite of a mesoporous photonic matrix with a conformal optical coating. One example composite coating includes a mesoporous photonic coating comprising a plurality of particles having sizes between 100 nm and 2000 nm, and a conformal optical coating formed by Atomic Layer Deposition (ALD) that infiltrates the mesoporous structure of the photonic coating and comprises metal nanoparticles and an amorphous dielectric matrix.

14 SOLAR ENERGY↗
DOE OSTI2022

Scaffolding matrix with internal nanoparticles

A battery electrode composition is provided comprising composite particles, with each composite particle comprising active material and a scaffolding matrix. The active material is provided to store and release ions during battery operation. For certain active materials of interest, the storing and releasing of the ions causes a substantial change in volume of the active material. The scaffolding matrix is provided as a porous, electrically-conductive scaffolding matrix within which the active material is disposed. In this way, the scaffolding matrix structurally supports the active material, electrically interconnects the active material, and accommodates the changes in volume of the active material.

Yushin, Gleb↗
DOE OSTI2022

Scaffolding matrix with internal nanoparticles

A battery electrode composition is provided comprising composite particles, with each composite particle comprising active material and a scaffolding matrix. The active material is provided to store and release ions during battery operation. For certain active materials of interest, the storing and releasing of the ions causes a substantial change in volume of the active material. The scaffolding matrix is provided as a porous, electrically-conductive scaffolding matrix within which the active material is disposed. In this way, the scaffolding matrix structurally supports the active material, electrically interconnects the active material, and accommodates the changes in volume of the active material.

25 ENERGY STORAGE↗
DOE OSTI2024

Scaffolding matrix with internal nanoparticles

A battery electrode composition is provided comprising composite particles, with each composite particle comprising active material and a scaffolding matrix. The active material is provided to store and release ions during battery operation. For certain active materials of interest, the storing and releasing of the ions causes a substantial change in volume of the active material. The scaffolding matrix is provided as a porous, electrically-conductive scaffolding matrix within which the active material is disposed. In this way, the scaffolding matrix structurally supports the active material, electrically interconnects the active material, and accommodates the changes in volume of the active material.

Yushin, Gleb↗
DOE OSTI2024

Fully Recyclable CFRP Particles (CRADA 519)

The proposed resin-enhanced materials, which utilize fully recycled CFRP (carbon-fiber-reinforced polymer) particles, are enabled by PARC's proprietary Chemically Linked Particles Networks (13 granted patents and patent applications). PNNL and PARC have collaborated to develop manufacturing methods, such as vacuum-assisted wet compression molding and filament winding, for fabricating fiber-reinforced composites with the PARC matrix. PNNL has conducted various mechanical, physical, and thermal characterizations to compare their differences between the composites with baseline and PARC matrices. Those characterizations include density, void volume fraction, optical micrography, uniaxial tension, four-point bending/flexure, interlaminar shear, coefficient of thermal expansion, glass transition temperature, and curing kinetics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Manufacturing and characterization of continuous fiber-reinforced thermoplastic tape overmolded long fiber thermoplastic

Light-weight construction, design freedom, integration of functions, and compelling cost element are desired by Original Equipment Manufacturers (OEMs) and their suppliers. The emergence of overmolding of continuous-discontinuous reinforcement enables design freedom and ability to tailor stiffness, strength, and damage tolerance for structural applications. In this work, long fiber thermoplastics (LFT) are overmolded with continuous fiber-reinforced thermoplastic (CFRTP) tape are combined using extrusion compression molding process to evaluate the structural performance. The CFRTP tape overmolded LFT samples were characterized using nondestructive and destructive techniques to track fiber alignment, fiber distribution, manufacturing defects, interfacial bonding of the tape – LFT and effect of CFRTP tape on LFT. Mode 1 fracture toughness, G 1c for tape overmolded LFT was higher by 25–30% compared to literature reported G 1c . This response was attributed to excellent fiber distribution, good fiber wetting, and absence of voids at the interface. Three-point bend test indicated that CFRTP tape overmolded LFT composites were better able to resist damage under the bending load compared to constituent LFT composite. Flexural strength of the overmolded composite was higher by 119–142%, and modulus higher by 77–65% compared to constituent LFT composite. Simulated flexural results accurately represents the mechanical behavior of composites. Here, the penetration energy of tape overmolded LFT composites determined by LVI test was in the range of 27.66–30.15 J, which is significantly higher than constituent LFT composite, 7.76 J. CFRTP tape overmolded LFT composite exhibits progressive fiber fracture, matrix cracking, and interfacial debonding failure, whereas, constituent LFT composite showed catastrophic fiber fracture.

42 ENGINEERING↗
DOE OSTI2023

Reactive matrix infiltration of powder preforms

A reactive matrix infiltration process is described herein, which includes contacting a surface of a preform comprising reinforcement material particles with a molten infiltrant comprising a matrix material, the matrix material comprising an Al—Ce alloy, whereby the infiltrant at least partially fills spaces between the reinforcement material particles by capillary action and reacts with the reinforcement material particles to form a composite material form, the composite material comprising the matrix material, at least one intermetallic phase, and, optionally, reinforcement material particles. A composite material form also is described, which includes a plurality of reinforcement material particles comprising a metal alloy or a ceramic, a matrix material at least partially filling spaces between the reinforcement material particles; and at least one intermetallic phase surrounding at least some of the reinforcement material particles. The reinforcement material particles and intermetallic phase together may form a gradient core-shell structure.

Rios, Orlando↗