Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DILUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Superconductivity from energy fluctuations in dilute quantum critical polar metals

Abstract Superconductivity in low carrier density metals challenges the conventional electron-phonon theory due to the absence of retardation required to overcome Coulomb repulsion. Here we demonstrate that pairing mediated by energy fluctuations, ubiquitously present close to continuous phase transitions, occurs in dilute quantum critical polar metals and results in a dome-like dependence of the superconducting T c on carrier density, characteristic of non-BCS superconductors. In quantum critical polar metals, the Coulomb repulsion is heavily screened, while the critical transverse optical phonons decouple from the electron charge. In the resulting vacuum, long-range attractive interactions emerge from the energy fluctuations of the critical phonons, resembling the gravitational interactions of a chargeless dark matter universe. Our estimates show that this mechanism may explain the critical temperatures observed in doped SrTiO 3 . We provide predictions for the enhancement of superconductivity near polar quantum criticality in two- and three-dimensional materials that can be used to test our theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Nanoscale wetting controls reactive Pd ensembles in synthesis of dilute PdAu alloy catalysts

The performance of bimetallic dilute alloy catalysts is largely determined by the size of minority metal ensembles on the nanoparticle surface. By analyzing the synthesis of catalysts comprising Pd 8 Au 92 nanoparticles supported on silica using surface-sensitive techniques, we report that whether Pd overgrowth occurs before or after Au nanoparticle deposition onto the support controls the surface Pd ensemble size and abundance. These differences in Pd ensembles influence catalytic reactivity in H 2 –D 2 isotope exchange and benzaldehyde hydrogenation, which, in correlation with theoretical calculations, is used to elucidate the active site(s) in each reaction. To clarify how the synthetic sequence controls the formation of Pd ensembles, we combine numerical wetting calculations and molecular dynamics simulations (with a machine-learned force field) to visualize Pd deposition and migration on the nanoparticle surface, respectively. Our results suggest that the nanoparticle–support interface restricts nanoparticle accessibility to Pd deposition, which consequently controls the Pd ensemble size, illustrating the critical role of nanoscale wetting phenomena during bimetallic catalyst preparation.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A resonant valence bond spin liquid in the dilute limit of doped frustrated Mott insulators

Abstract Ideas about resonant valence bond liquids and spin–charge separation have led to key concepts in physics such as quantum spin liquids, emergent gauge symmetries, topological order and fractionalization. Despite extensive efforts to demonstrate the existence of a resonant valence bond phase in the Hubbard model that originally motivated the concept, a definitive realization has yet to be achieved. Here we present a solution to this long-standing problem by uncovering a resonant valence bond phase exhibiting spin–charge separation in realistic Hamiltonians. We show analytically that this ground state emerges in the dilute-doping limit of a half-filled Mott insulator on corner-sharing tetrahedral lattices with frustrated hopping, in the absence of exchange interactions. We confirm numerically that the results extend to finite exchange interactions, finite-sized systems and finite dopant density. Although much attention has been devoted to the emergence of unconventional states from geometrically frustrated interactions, our work demonstrates that kinetic energy frustration in doped Mott insulators may be essential for stabilizing robust, topologically ordered states in real materials.

Physics↗
DOE OSTI2015

Insights into the effect of dilute acid, hot water or alkaline pretreatment on cellulose accessible surface area and the overall porosity of Populus

Pretreatment is known to render biomass more reactive to cellulase by altering the chemical compositions as well as physical structures of biomass. Simons stain technique along with mercury porosimetry were applied on the acid, neutral, and alkaline pretreated materials to measure the accessible surface area of cellulose and pore size distribution of Populus. Results indicated that acid pretreatment is much more effective than water and alkaline pretreatment in terms of cellulose accessibility increase. Further investigation suggests that lignin does not dictate cellulose accessibility to the extent that hemicellulose does, but it does restrict xylan accessibility which in turn controls the access of cellulase to cellulose. The most interesting finding is that severe acid pretreatment significantly decreases the average pore size, i.e., 90% average size decrease could be observed after 60 min dilute acid pretreatment at 160 °C; moreover, the nano-pore space formed between coated microfibrils is increased after pretreatment, especially for the acid pretreatment, suggesting this particular type of biomass porosity is probably the most fundamental barrier to effective enzymatic hydrolysis.

09 BIOMASS FUELS↗
DOE OSTI2023

Exploring the working range of automated standard dilution analysis of nutrient elements in foods by inductively coupled plasma optical emission spectrometry

Inductively coupled plasma optical emission spectrometry (ICP-OES) is an important tool for measuring nutrient elements in food. ICP-OES methods typically determine analytical concentrations using external standard calibration but can be susceptible to matrix effects. The method of standard additions does not suffer from matrix effects but is time consuming and labor intensive. Automated standard dilution analysis (SDA) allows for online matrix matched calibration without preparing individual standard additions for each sample matrix. This approach may solve both time and matrix issues and has been described in the literature as an attractive alternative to standard additions. The working range of the method for nutrient elements, however, is an understudied feature of SDA that may be a potential drawback to routine analysis of foods. We evaluated automated SDA performance through the analysis of 10 reference materials and four fortified (i.e., spiked) foods spanning the AOAC food triangle. We evaluated the working range, accuracy, and precision for analyses of nutrient elements in foods. Accepted accuracy (80–120% recovery) was achieved for 10 nutrient elements, Ca, Cu, Fe, K, Mg, Mn, Na, P, S, and Zn, when the analytical solution concentration to standard concentration ratio was less than 10. This equates to a working range for each element spanning at least two orders of magnitude. Removing outliers, Z scores (n = 95) ranged from –1.8 to 0.88, and the average recovery (n = 85) from fortification experiments was 97 ± 12% (2σ). Therefore, automated SDA applied to ICP-OES may be used for nutrient elemental analyses in samples with difficult matrices such as foods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Highly efficient organic solar cells with superior deformability enabled by diluting the small molecule acceptor content

Developing efficient organic solar cells (OSCs) with strong mechanical deformability is important to be addressed to ensure their operational reliability in wearable electronics. However, it is challenging to achieve mechanically robust polymer/small molecule OSCs with an efficiency over 17% due to the abundant brittle donor/acceptor (D/A) interface. Decreasing the small molecule content can reduce the brittle D/A interface area to enhance deformability, but it may also cause discontinuous electron-conducting regions and thus deteriorate photovoltaic performance. Here, we incorporate a polymer donor (D18) into a binary PTQ10cm-BTP-PhC6 system at a constant PTQ10:m-BTP-PhC6 ratio of 1 : 1.2 to minimize the D/A interfacial area and modulate phase separation, and subsequently fabricate mechanically reliable OSCs with high efficiency. The large incorporation of D18 molecules increases the crystallinity of m-BTP-PhC6 molecules because of the poor interaction between D18 and the two host materials, affording sufficient pathways for efficient charge percolation at a large D/A ratio. More importantly, highly aggregated m-BTP-PhC6 molecules help to minimize the D/A interfacial area, enabling ternary films with better deformability than their binary counterparts. As a result, ternary OSCs with a large D/A ratio of 1.5 : 1.2 exhibit a high efficiency of 17.3% with a crack-onset strain (COS) of 8.8%, which significantly outperforms their binary counterparts with an efficiency of 13.8% and a COS of 4.4%. Finally, diluting the content of small molecules and controlling intermolecular interaction through the introduction of the second polymer donor represents a promising strategy to fabricate efficient OSCs with superior deformability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Ammonolysis with N 2 -diluted NH 3 suppresses Ta( IV ) defects in BaTaO 2 N and enhances photocatalytic water oxidation

BaTaO 2 N stands out among oxynitride photocatalysts because of its ability to capture visible light and to drive the photoelectrochemical water oxidation reaction. However, its solar energy conversion performance is limited by electron–hole recombination at Ta( IV ) defects in the material. These defects are formed by overreduction of the Ta(v) oxide precursor by excess ammonia under the high temperature conditions during ammonolysis. Here we show for the first time that Ta( IV ) defect concentrations can be lowered by conducting the ammonolysis reaction in mixed NH 3 /N 2 gas. The obtained BaTaO 2 N samples crystallize in the cubic CaTiO 3 structure type and form 200–300 nm faceted nanocrystals, based on X-ray diffraction, scanning electron microscopy, and HRTEM. Electron paramagnetic resonance spectra observe the Ta( IV ) defects at g = 1.999 and confirm an 11-fold reduction for the product synthesized in mixed (0.13 : 1.0 vol) NH 3 /N 2 gas, equivalent to 1.14 × 10 16 cm −3 Ta( IV ) ions. This optimized BaTaO 2 N has nearly twice the photocatalytic oxygen evolution activity (AQE of 6.78% at 400 nm) of a reference material made with 1.0 atm ammonia and 78% higher photoelectrochemical water oxidation photocurrent (0.9 mA cm −2 at 1.23 V vs. RHE) under simulated sunlight. According to X-ray photoelectron spectroscopy, remaining Ta( IV ) defects are concentrated in the surface region of the BaTaO 2 N particles, where >50% of all Ta ions are found in the +4 oxidation state. This surface Ta( IV ) population can be directly observed in Vibrating Kelvin Probe Surface Photovoltage Spectra (VK-SPV) via its 1.2–1.4 eV photovoltage onset. Here, it suggests that the surface Ta( IV ) ions contribute empty d-states 0.5–0.7 eV below the BaTaO 2 N conduction band edge. These findings highlight how the energetics and concentrations of Ta( IV ) defects influence the photoelectrochemical water oxidation ability of BaTaO 2 N. Additionally, the work establishes ammonolysis with diluted NH 3 as a new tool to minimize defects in BaTaO 2 N and to raise its solar energy conversion efficiency toward its theoretical limit. Because of its simplicity, the reduced ammonia pressure strategy will likely be applicable to other oxynitrides, which generally suffer from overreduction problems during ammonolysis.

Salmanion, Mahya [University of California, Davis,↗
DOE OSTI2012

Preferential incorporation of substitutional nitrogen near the atomic step edges in diluted nitride alloys

We have investigated the influence of the surface roughness on nitrogen incorporation during the molecular beam epitaxy of diluted nitrides, independently of the other growth parameters. GaPN/GaP layers grown simultaneously on surfaces displaying different roughnesses reveal a large difference in nitrogen incorporation despite the same growth temperature and growth rate. The same difference is found on quasi-lattice-matched GaAsPN demonstrating that the phenomenon is not related to any strain-induced mechanisms. The tendency is clearly confirmed when varying the growth conditions. As a direct consequence, the incorporation of substitutional nitrogen near the atomic step edges is found to be 6.7 times more probable than the in-plane nitrogen incorporation. The formation of N-N{sub i} clusters and their stability on the surface is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Infrared reflectivity spectra of gas-source molecular beam epitaxy grown dilute InN{sub x}As{sub 1-x}/InP (001)

Vibrational spectra of gas-source molecular beam epitaxy grown dilute InN{sub x}As{sub 1-x}/InP (001) alloys are obtained using a Fourier-transform infrared (IR) spectroscopy. A triply degenerate N{sub As} local vibrational mode of T{sub d}-symmetry is observed near 438 cm{sup -1} corresponding to the In-N bond energy. The analysis of composition dependent infrared reflectivity spectra in InNAs has predicted a two-phonon-mode behavior. In In(Ga)-rich GaInNAs alloys the observed splitting of the N{sub As} local mode into a doublet for the N{sub As}-Ga{sub 1}(In{sub 1})In{sub 3}(Ga{sub 3}) pair-defect of C{sub 3v}-symmetry is consistent with our simulated results based on a sophisticated Green's function theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Hydrogen effects in dilute III-N-V alloys: From defect engineering to nanostructuring

The variation of the band gap energy of III-N-V semiconductors induced by hydrogen incorporation is the most striking effect that H produces in these materials. A special emphasis is given here to the combination of N-activity passivation by hydrogen with H diffusion kinetics in dilute nitrides. Secondary ion mass spectrometry shows an extremely steep (smaller than 5 nm/decade) forefront of the H diffusion profile in Ga(AsN) under appropriate hydrogenation conditions. This discovery prompts the opportunity for an in-plane nanostructuring of hydrogen incorporation and, hence, for a modulation of the material band gap energy at the nanoscale. The properties of quantum dots fabricated by a lithographically defined hydrogenation are presented, showing the zero-dimensional character of these novel nanostructures. Applicative prospects of this nanofabrication method are finally outlined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2013

K and Mn co-doped BaCd{sub 2}As{sub 2}: A hexagonal structured bulk diluted magnetic semiconductor with large magnetoresistance

A bulk diluted magnetic semiconductor was found in the K and Mn co-doped BaCd{sub 2}As{sub 2} system. Different from recently reported tetragonal ThCr{sub 2}Si{sub 2}-structured II-II-V based (Ba,K)(Zn,Mn){sub 2}As{sub 2}, the Ba{sub 1−y}K{sub y}Cd{sub 2−x}Mn{sub x}As{sub 2} system has a hexagonal CaAl{sub 2}Si{sub 2}-type structure with the Cd{sub 2}As{sub 2} layer forming a honeycomb-like network. The Mn concentration reaches up to x ∼ 0.4. Magnetization measurements show that the samples undergo ferromagnetic transitions with Curie temperature up to 16 K. With low coercive field of less than 10 Oe and large magnetoresistance of about −70%, the hexagonal structured Ba{sub 1−y}K{sub y}Cd{sub 2−x}Mn{sub x}As{sub 2} can be served as a promising candidate for spin manipulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2013

Theory of the electronic structure of dilute bismide and bismide-nitride alloys of GaAs: Tight-binding and k.p models

The addition of dilute concentrations of bismuth (Bi) into GaAs to form GaBi{sub x}As{sub 1−x} alloys results in a large reduction of the band gap energy (E{sub g}) accompanied by a significant increase of the spin-orbit-splitting energy (Δ{sub SO}), leading to an E{sub g} < Δ{sub SO} regime for x ∼ 10% which is technologically relevant for the design of highly efficient photonic devices. The quaternary alloy GaBi{sub x}N{sub y}As{sub 1−x−y} offers further flexibility for band gap tuning, because both nitrogen and bismuth can independently induce band gap reduction. This work reports sp{sup 3}s* tight binding and 14-band k⋅p models for the study of the electronic structure of GaBi{sub x}As{sub 1−x} and GaBi{sub x}N{sub y}As{sub 1−x−y} alloys. Our results are in good agreement with the available experimental data.

36 MATERIALS SCIENCE↗