An improved equation for discharge voltage
An improved equation for battery discharge voltage was developed. By looking at the voltage discharge curves, some prediction of cell life could be made.
Mcdermott, P.↗
SEARCH · Engineering Papers
Results for “voltage”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Differential charging of high-voltage spacecraft - The equilibrium potential of insulated surfaces
A theory is presented for the steady-state potential of insulated surfaces near exposed high voltages. The term 'insulated surfaces' is used to mean either dielectric surfaces or electrically isolated metallic surfaces. The potential is bounded below by the zero of the material's I-V curve assuming total suppression of secondary electrons, and above by assuming total extraction of secondaries. Within these bounds, the material's surface potential is determined consistently with the solution to Poisson's equation external to the vehicle. The theory is compared with rocket experiments and with SCATHA satellite data. Also, an explanation is suggested for the observed 'snapover' of solar cell coverslips from near plasma ground potential to near the potential of positively biased interconnects with increasing bias voltage.
Katz, I.↗
Fabrication of multijunction high voltage concentrator solar cells by integrated circuit technology
Standard integrated circuit technology has been developed for the design and fabrication of planar multijunction (PMJ) solar cell chips. Each 1 cm x 1 cm solar chip consisted of six n(+)/p, back contacted, internally series interconnected unit cells. These high open circuit voltage solar cells were fabricated on 2 ohm-cm, p-type 75 microns thick, silicon substrates. A five photomask level process employing contact photolithography was used to pattern for boron diffusions, phorphorus diffusions, and contact metallization. Fabricated devices demonstrated an open circuit voltage of 3.6 volts and a short circuit current of 90 mA at 80 AMl suns. An equivalent circuit model of the planar multi-junction solar cell was developed.
Valco, G. J.↗
Pairwise Comparison of Voltage Sets
Optical preprocessor compares 16 incoming signals with reference voltages. Integrated optical substraction to take "vector difference" of two sets of analog voltages. Applications include satellite onboard processing of pictorial data so data not useful discardes; device recognizes presence of accessive cloud cover and signals hault to data transmission.
Verber, C. M.↗
Synchronized voltage contrast display analysis system
An apparatus and method for comparing internal voltage potentials of first and second operating electronic components such as large scale integrated circuits (LSI's) in which voltage differentials are visually identified via an appropriate display means are described. More particularly, in a first embodiment of the invention a first and second scanning electron microscope (SEM) are configured to scan a first and second operating electronic component respectively. The scan pattern of the second SEM is synchronized to that of the first SEM so that both simultaneously scan corresponding portions of the two operating electronic components. Video signals from each SEM corresponding to secondary electron signals generated as a result of a primary electron beam intersecting each operating electronic component in accordance with a predetermined scan pattern are provided to a video mixer and color encoder.
Johnston, M. F.↗
High voltage design guide. Volume 5: Spacecraft
This report supplies the technical background and design techniques needed by an engineer who is designing electrical insulation for high-voltage, high-power components, equipment, and systems on spacecraft. The data in this volume is in addition to the material in Volume 4 of the final report "High Voltage Design Guide: Aircraft' which is common to the electrical insulation design for both aircraft and spacecraft equipment. The common data includes testing, tracking, partial discharges and corona. Unique material involves the semi vacuum environment, spacecraft charging, and multipactor.
W G Dunbar↗
A high voltage electrical power system for low Earth orbit applications
The results of testing a high voltage electrical power system (EPS) breadboard using high voltage power processing equipment developed at Marshall Space Flight Center and Ni-Cd batteries are discussed. These test results are used to extrapolate to an efficient, reliable, high capacity EPS for near term low Earth orbit, high power applications. EPS efficiencies, figures of merit, and battery reliability with a battery protection and reconditioning circuit are presented.
Lanier, J. R., Jr.↗
Laboratory experience with voltage breakdown
Voltage breakdown failures in photovoltaic module electrical insulations lead to loss of entire source circuits and require costly maintenance and replacement. Avoiding such catastrophes requires that modules be designed so that voltage breakdown either never occurs or occurs so rarely that it affects the least life cycle energy costs insignificantly. To achieve this desired balance of cost and reliability, the module design engineer must understand the failure mechanisms and use data on materials and failue rates to suppress or retard them. Recently obtained failure mechanism information, rate data and materials property data and a qualitative model of module failure prediction are presented.
Mon, G. R.↗
An improved push-pull voltage fed converter using a tapped output-filter inductor
A new concept of using a tapped output-filter inductor and an auxiliary commutating diode to reduce the likelihood of transformer core saturation in a push-pull, voltage-fed converter is presented. The linearized circuit model and transfer functions are derived with a hybrid approach using both state-space and circuit averaging. Operation of the new converter - including parasitic effects - is discussed, and a design equation for inductor tap ratio is established. It is predicted and experimentally confirmed that the new converter has more symmetrical transformer core operation, and the potential exits for lower transistor turnon current and reduced transistor voltage stress. These benefits reduce switching loss and enhance transistor reliability.
Wester, G. W.↗
Surface effects in high voltage silicon solar cells
The surface of low-resistivity silicon solar cells appears to be a major source of dark diffusion current. This region, consisting of the interface and the adjacent heavily doped layer, therefore, prevents attainment of the high open-circuit voltages expected from these cells. This paper describes the experimental effort carried out to reduce the various contributions of dark current from the surface. Analysis of results from this effort points to means of improving cell voltages by changing processing and structures.
Meulenberg, A.↗
Circuit transients due to negative bias arcs on a high-voltage solar array in low Earth orbit
Arcing to negatively biased, exposed solar cell interconnects on solar arrays placed in plasma environments was established. Arcing, however, may cause damaging interference with the operation of electrical power systems in spacecraft planned to be driven with high-voltage solar arrays. An analytical model was developed to estimate the effects of netagive bias arcs on solar array power system performance. Solar cell characteristics, plasma interactions, and power system features are modeled by a linear, lumped element transient circuit, and the time domain equations are solved. Numerical results for solar array common mode and load voltage transients are calculated for typical conditions. Acceptable load transients are found for a range of arc current amplitudes and time constants.
Metz, R. N.↗
A new very high voltage semiconductor switch
A new family of semiconductor switches using double injection techniques and compensated deep impurities is described. They have the potential to raise switching voltages a factor of 10 higher (up to 100 kV) than p-n junction devices while exhibiting extremely low (or zero) forward voltage. Several potential power switching applications are indicated.
Sundberg, G. R.↗
Dilute plasma coupling currents to a high voltage solar array in weak magnetic fields
The plasma coupling current to an approximately 2000 sq cm array was measured for externally biased positive and negative voltages on the array to 1000 V in applied magnetic field strengths from 0 to 0.93 G. The plasma density varied from 2,000 to 1.3 million electrons/cu cm. It was found that the magnetic field primarily increased the plasma coupling current for negative biases. For positive bias, the current could increase or decrease depending on the voltage, field strength, and plasma density. It was also found that the plasma coupling current was not very sensitive to how the plane of the array was oriented relative to the magnetic field.
Grier, N. T.↗
Direct experimental determination of voltage across high-low junctions
High-low (HL) junctions form a part of many semiconductor devices, including back surface field solar cells. A first experimental determination and interpretation of the voltage across the HL junction under low- and high-injection conditions is presented as a function of the voltage across a nearby p/n junction. Theoretical analysis from first principles is shown to bear well on the experimental results. In addition, a test structure is proposed for measurement of the effective surface recombination velocity at the HL junctions.
Daud, T.↗
A new very high voltage semiconductor switch
A new family of semiconductor switches using double injection techniques and compensated deep impurities is described. They have the potential to raise switching voltages a factor of 10 higher (up to 100 kV) than p-n junction devices while exhibiting extremely low (or zero) forward voltage. Several potential power switching applications are indicated.
Sundberg, G. R.↗
High voltage system: Plasma interaction summary
The possible interactions that could exist between a high voltage system and the space plasma environment are reviewed. A solar array is used as an example of such a system. The emphasis in this review is on the discrepancies that exist in this technology in both flight and ground experiment data. It has been found that, in ground testing, there are facility effects, cell size effects and area scaling uncertainties. For space applications there are area scaling and discharge concerns for an array as well as the influence of the large space structures on the collection process. There are still considerable uncertainties in the high voltage-space plasma interaction technology even after several years of effort.
Stevens, N. John↗
Solar wind control of the polar-cap voltage
The results of using various models to predict polar-cap potentials are reviewed. Quantitative predictions of merging rate, and hence of polar-cap voltage, based on subsolar merging models are reviewed, and tests of dayside merging models and their results are reexamined. Predictions and tests of cusp merging models are discussed. Two new empirical formulas for the dependence of the asymptotic polar-cap potential on the IMF are presented, and predictions of the dependence of dayside and lobe merging voltages on the IMF are derived from the antiparallel merging hypothesis.
Reiff, Patricia H.↗
Detecting Faults In High-Voltage Transformers
Simple fixture quickly shows whether high-voltage transformer has excessive voids in dielectric materials and whether high-voltage lead wires too close to transformer case. Fixture is "go/no-go" indicator; corona appears if transformer contains such faults. Nests in wire mesh supported by cap of clear epoxy. If transformer has defects, blue glow of corona appears in mesh and is seen through cap.
Blow, Raymond K.↗