Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “peak finding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Large-scale simulation-based parametric analysis of an optimal precooling strategy for demand flexibility in a commercial office building

Achieving success with grid-interactive efficient buildings (GEBs) is closely tied to the utilization of flexible loads. A valuable strategy involves the implementation of precooling techniques before high-demand events, such as peak hours, by adjusting zone air temperature setpoints. This leads to a reduction in thermal loads and peak electricity demand during these times, as the building’s thermal mass stores and subsequently releases thermal energy. However, the effectiveness of the pre-cooling optimization is highly contingent on specific conditions such as building thermal properties, weather conditions, utility rate structure, HVAC equipment sizing, etc. Therefore, investigating the impacts of these condition-specific factors is crucial, especially when considering precooling strategies that utilize thermal mass in commercial buildings. In this paper, we first devised a novel heuristic control approach that incorporates parameterized optimal precooling thermostat schedules to enhance demand flexibility in a commercial office building. Subsequently, we conducted a thorough performance evaluation of this control strategy. Here, the optimal thermostat schedule was parameterized using three optimization variables: the precooling start time, the precooling end time, and the precooling temperature setpoint. Utilizing the DOE medium-sized office building as the virtual testbed, we showed that the parameterized schedule effectively approximates model predictive control and requires drastically reduced computational overhead. In addition, we investigated the impact of different influencing factors on the optimal precooling strategy. These factors include building thermal mass, outdoor air conditions, and energy price profiles. Using high-performance computing, we simulated a total of 225 scenarios, consisting of three levels of thermal mass, five typical outdoor air temperature profiles, and fifteen time-of-use price plans. The results demonstrate that optimal thermostat scheduling could save substantial energy cost in medium-sized office buildings with heavy thermal mass but with some energy penalty. Although the potential for cost savings is lower in buildings with low and medium thermal mass, the energy penalty remains consistent in all three thermal mass scenarios. The study also highlights the need to account for zone diversity and recognize that a one-size-fits-all-zone setpoint schedule may not be suitable for all zones and can lead to unnecessary energy wastage. Furthermore, the results highlight that while outdoor air conditions play a role in cost and energy performance, the cooling load exerts a more immediate and substantial influence on cost savings in precooling strategies. Although cost savings are comparable under certain conditions with the same cooling load, observed deviations in energy penalty indicate potential disparities in the efficiency of the HVAC system during the load-shifting process. In addition, the duration of peak pricing and the ratio between peak and off-peak times exhibit clear correlations with cost savings and energy consumption, aligning with intuitive expectations. These findings offer valuable insights for optimizing precooling strategies in office buildings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

“Antenna-like” Light-Harvesting in Partially Metalated Porphyrin Hydrogen-Bonded Organic Frameworks

Arrays of light harvesting molecules with long-range order hold promise as materials capable of efficient collection of photons as well as rapid transport of captured solar energy to chemical catalysts. Hydrogen-bonded organic frameworks (HOFs) could be promising artificial light-harvesting platforms, due to their crystalline nature and their comparative ease of synthesis. In this work, mixed-linkers of either zinc-metallated or free base tetrakis(4-carboxyphenyl)porphyrin HOFs were examined and found to demonstrate ‘antenna-like’ light harvesting behavior. Using time-resolved emission spectroscopy, Förster resonance energy transfer from zinc porphyrin to free-base porphyrin was assessed. Based on changes in the emission peak profile as the ratio of zinc porphyrin to free-base porphyrin is varied, we find that, in the limit of 100% zinc porphyrin, a photogenerated exciton can sample ~48 chromophores. These findings suggest that stacked linkers within HOFs can act as light harvesting ‘antennae’ and with encapsulation of suitable catalysts, may offer prospective application as photochemical energy conversion systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Understanding 2p core-level excitons of late transition metals by analysis of mixed-valence copper in a metal–organic framework

The L 2,3 -edge X-ray absorption spectra of late transition metals such as Cu, Ag, and Au exhibit absorption onsets lower in energy for higher oxidation states, which is at odds with the measured spectra of earlier transition metals. Time-dependent density functional theory calculations for Cu 2+ /Cu + reveal a larger 2p core-exciton binding energy for Cu 2+ , overshadowing shifts in single-particle excitation energies with respect to Cu + . Finally, we explore this phenomenon in a Cu + metal–organic framework with ~12% Cu 2+ defects and find that corrections with self-consistent excited-state total energy differences provide accurate XAS peak alignment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Applying Thomson scattering to diagnosing turbulent density and velocity fluctuations in a gas-puff z-pinch

The electron plasma wave feature (EPW) in the time-resolved Thomson scattering spectrum is used to obtain the local electron density in imploding high energy density gas-puff z-pinch plasmas. The optical setup was optimized to allow the relatively weak EPW feature obtained from 1 MA imploding neon gas-puff z-pinches to be seen above the continuum emission as well as the brighter ion acoustic wave (IAW) feature. Using a frequency-doubled Nd:YLF laser (E = 10 J, λ = 526.5 nm, Δt= 2.3 ns, spot size ~ 250 μm) and two visible light streak cameras, we determined the average electron density in the imploding plasma sheath 40 ns prior to stagnation to be n e = 2.5 × 10 18 /cm 3 . At pinch time, it reached n e = 1.7 × 10 19 /cm 3 . Here, the electron temperature during implosion measured via the IAW (approximately 50 eV) was four times lower than the implosion electron temperature measured via the EPW (approximately 200 eV), assuming that neither feature is affected by turbulent fluctuations in the plasma. In order for the electron temperatures inferred from the EPW and IAW spectral features to be self-consistent, we find that it is necessary to include velocity fluctuations in the analysis of the IAW feature peaks and corresponding density fluctuation in the peak widths of the EPW feature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Studies on the structure and the magnetic properties of high-entropy spinel oxide (MgMnFeCoNi)Al 2 O 4

The study of high-entropy materials has attracted enormous interest since they could show new functional properties that are not observed in their related parent phases. Here, we report single crystal growth, structure, thermal transport, and magnetic property studies on a novel high-entropy oxide with the spinel structure (MgMnFeCoNi)Al 2 O 4 . We have successfully grown high-quality single crystals of this high-entropy oxide using the optical floating zone growth technique for the first time. The sample was confirmed to be a phase pure high-entropy oxide using x-ray diffraction and energy-dispersive spectroscopy. Through magnetization measurements, we found (MgMnFeCoNi)Al 2 O 4 exhibits a cluster spin glass state, though the parent phases show either antiferromagnetic ordering or spin glass states. Furthermore, we also found that (MgMnFeCoNi)Al 2 O 4 has much greater thermal expansion than its CoAl 2 O 4 parent compound using high resolution neutron Larmor diffraction. We further investigated the structure of this high-entropy material via Raman spectroscopy and extended x-ray absorption fine structure spectroscopy (EXAFS) measurements. From Raman spectroscopy measurements, we observed (MgMnFeCoNi)Al 2 O 4 to display a combination of the active Raman modes in its parent compounds with the modes shifted and significantly broadened. This result, together with the varying bond lengths probed by EXAFS, reveals severe local lattice distortions in this high-entropy phase. Additionally, we found a substantial decrease in thermal conductivity and suppression of the low temperature thermal conductivity peak in (MgMnFeCoNi)Al 2 O 4 , consistent with the increased lattice defects and strain. These findings advance the understanding of the dependence of thermal expansion and transport on the lattice distortions in high-entropy materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Inference of experimental radial impurity transport on Alcator C-Mod: Bayesian parameter estimation and model selection

We present a fully Bayesian approach for the inference of radial profiles of impurity transport coefficients and compare its results to neoclassical, gyrofluid and gyrokinetic modeling. Using nested sampling, the Bayesian Impurity Transport InferencE (BITE) framework can handle complex parameter spaces with multiple possible solutions, offering great advantages in interpretative power and reliability with respect to previously demonstrated methods. BITE employs a forward model based on the pySTRAHL package, built on the success of the well-known STRAHL code [Dux, IPP Report, 2004], to simulate impurity transport in magnetically-confined plasmas. In this paper, we focus on calcium (Ca, Z=20) Laser Blow-Off injections into Alcator C-Mod plasmas. Multiple Ca atomic lines are diagnosed via high-resolution X-ray Imaging Crystal Spectroscopy and Vacuum Ultra-Violet measurements. We analyze a sawtoothing I-mode discharge for which neoclassical and turbulent (quasilinear and nonlinear) predictions are also obtained. Here, we find good agreement in diffusion across the entire radial extent, while turbulent convection and density profile peaking are estimated to be larger in experiment than suggested by theory. Efforts and challenges associated with the inference of experimental pedestal impurity transport are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

The distribution of [α/Fe] in the Milky Way disc

ABSTRACT Using a sample of red giant stars from the Apache Point Observatory Galactic Evolution Experiment (APOGEE) Data Release 16, we infer the conditional distribution $p([\alpha /{\rm Fe}]\, |\, [{\rm Fe}/{\rm H}])$ in the Milky Way disk for the α-elements Mg, O, Si, S, and Ca. In each bin of [Fe/H] and Galactocentric radius R, we model p([α/Fe]) as a sum of two Gaussians, representing ‘low-α’ and ‘high-α’ populations with scale heights $z_1=0.45\, {\rm kpc}$ and $z_2=0.95\, {\rm kpc}$, respectively. By accounting for age-dependent and z-dependent selection effects in APOGEE, we infer the [α/Fe] distributions that would be found for a fair sample of long-lived stars covering all z. Near the Solar circle, this distribution is bimodal at sub-solar [Fe/H], with the low-α and high-α peaks clearly separated by a minimum at intermediate [α/Fe]. In agreement with previous results, we find that the high-α population is more prominent at smaller R, lower [Fe/H], and larger |z|, and that the sequence separation is smaller for Si and Ca than for Mg, O, and S. We find significant intrinsic scatter in [α/Fe] at fixed [Fe/H] for both the low-α and high-α populations, typically ∼0.04-dex. The means, dispersions, and relative amplitudes of this two-Gaussian description, and the dependence of these parameters on R, [Fe/H], and α-element, provide a quantitative target for chemical evolution models and a test for hydrodynamic simulations of disk galaxy formation. We argue that explaining the observed bimodality will probably require one or more sharp transitions in the disk’s gas accretion, star formation, or outflow history in addition to radial mixing of stellar populations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Nanoscale Observation and Control of Quasiparticle Induced Magnetic Noise in a Superconducting Resonator

Superconducting circuits are arguably taking a leading role in driving the ongoing quantum technological revolution. A detailed knowledge of the microscopic fluctuating electromagnetic properties plays an important role in advancing the circuitry design, testing, and material integration of cutting-edge superconducting quantum electronics. Here, in this work, we report scanning nitrogen-vacancy (NV) quantum sensing of local magnetic noise environment of an on-chip superconducting resonator. We find that quasiparticle-induced fluctuating magnetic fields can drive NV spin relaxation, which shows a peak value around the superconducting transition point of niobium at the thermal equilibrium state. External microwave driving at the resonator mode frequency significantly increases the quasiparticle density, leading to enhancement of magnetic noise. We further perform optically detected magnetic resonance measurements to demonstrate quasiparticle magnetic noise mediated off-resonant dipole coupling between the NV center and niobium resonator. Our Letter reports experimental observation of the Hebel-Slichter peak signature by an external sensor outside of a superconductor. The presented study also highlights the advantages of quantum sensors in investigating miniaturized superconducting devices, providing insights into their future performance improvements.

Li, Senlei [Georgia Institute of Technology]↗
DOE OSTI2024

0D, 1D, 2D, and 3D simulations of an idealized coaxial impedance-matched Marx generator

We have conducted 0D, 1D, 2D, and 3D simulations of an idealized coaxial impedance-matched Marx generator (IMG) []. The 0D calculations were conducted with a four-element circuit model; the 1D, 2D, and 3D calculations were conducted with highly resolved, fully electromagnetic representations. The IMG consists of 30 stages distributed axially and connected electrically in series. Each stage is powered by two bricks separated by 180° and connected electrically in parallel. Each brick comprises two opposite-polarity capacitors in series with a single switch. The bricks drive an internal impedance-matched coaxial transmission line terminated by a resistive load. The simulations neglect effects due to the switch-triggering circuit, the capacitor-charging circuit, external conducting boundaries, and reactive components of the load. We find dimensionality does not significantly affect the electrical power delivered by the IMG to its load: peak load powers estimated by the 0D, 1D, 2D, and 3D simulations agree to within 1%. The 3D calculations demonstrate that electromagnetic power radiated by the bricks, and axial gaps between stages, reduces the peak load power by less than ∼ 1 % . Each simulation assumes the load impedance is 34% above that at which the load power is maximized. Operating an IMG with such an overmatched load offers several advantages while decreasing the peak load power by only 2%. The 0D, 1D, 2D, and 3D models outlined herein could be adapted to assess computationally competing IMG designs, and conduct a variety of numerical IMG experiments, an IMG is constructed. Published by the American Physical Society 2024

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Magnetic structure and resistivity minimum in GdCuAs 2

The electrical resistivity of GdCuAs 2 single crystals exhibits an anomalous Kondo-like resistivity minimum above the antiferromagnetic ordering temperature T N 1 approximate to 10.6 K, which is unusual for a highly localized 4f-moment (Gd 3+ ) system. Using x-ray resonant magnetic scattering, we determined the magnetic structure of GdCuAs 2 , where Gd moments are antiferromagnetically aligned along the crystallographic a axis and in the (+ + --) arrangement in the c direction and ferromagnetically arranged in the b direction. The antiferromagnetic order appears first at q = (δ, 0, 0.5) below 10 K, with an incommensurate modulation along the a axis and locks into a commensurate position at q = (1/3, 0, 0.5) below T N 2 approximate to 6 K. Our high-resolution x-ray diffraction measurements show a two-peak structure at Q = (2, 0, 6) above the resistivity minimum, suggesting a lower-symmetry crystal structure than the reported tetragonal structure, and the Q = (2, 0, 6) peak becomes a sharp one-peak structure below the resistivity minimum, implying a magnetoelastic coupling above T N . In conclusion, our findings suggest a complex interplay between the crystal structure and antiferromagnetic structure through a magnetoelastic coupling, associated with the anomalous resistivity minimum above T N 1 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

New constraints on warm dark matter from the Lyman- α forest power spectrum

The forest of Lyman-α absorption lines detected in the spectra of distant quasars encodes information on the nature and properties of dark matter and the thermodynamics of diffuse baryonic material. Its main observable—the 1D flux power spectrum (FPS)—should exhibit a suppression on small scales and an enhancement on large scales in warm dark matter (WDM) cosmologies compared to standard Λ⁢CDM. Here, we present an unprecedented suite of 1080 high-resolution cosmological hydrodynamical simulations run with the graphics processing unit-accelerated code cholla to study the evolution of the Lyman-α forest under a wide range of physically motivated gas thermal histories along with different free-streaming lengths of WDM thermal relics in the early Universe. A statistical comparison of synthetic data with the forest FPS measured down to the smallest velocity scales ever probed at redshifts 4.0≲z≲5.2 [E. Boera et al., Revealing reionization with the thermal history of the intergalactic medium: New constraints from the Ly⁢α flux power spectrum, Astrophys. J. 872, 101 (2019)] yields a lower-limit m WDM >3.1 keV (95% C.L.) for the WDM particle mass and constrains the amplitude and spectrum of the photoheating and photoionizing background produced by star-forming galaxies and active galactic nuclei at these redshifts. Interestingly, our Bayesian inference analysis appears to weakly favor WDM models with a peak likelihood value at the thermal relic mass of m WDM =4.5 keV. In conclusion, we find that the suppression of the FPS from free-streaming saturates at k≳0.1 s km -1 because of peculiar velocity smearing, and this saturated suppression combined with a slightly lower gas temperature provides a moderately better fit to the observed small-scale FPS for WDM cosmologies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Classical and quantum computing of shear viscosity for ( 2 + 1 ) D SU(2) gauge theory

We perform a nonperturbative calculation of the shear viscosity for ( 2 + 1 )-dimensional SU(2) gauge theory by using the lattice Hamiltonian formulation. The retarded Green’s function of the stress-energy tensor is calculated from real time evolution via exact diagonalization of the lattice Hamiltonian with a local Hilbert space truncation, and the shear viscosity is obtained via the Kubo formula. When taking the continuum limit, we account for the renormalization group flow of the coupling but no additional operator renormalization. We find the ratio of the shear viscosity and the entropy density η s is consistent with a well-known holographic result 1 4 π at several temperatures on a 4 × 4 honeycomb lattice with the local electric representation truncated at j max = 1 2 . We also find the ratio of the spectral function and frequency ρ x y ( ω ) ω exhibits a peak structure when the frequency is small. Both the exact diagonalization method and simple matrix product state classical simulation method beyond j max = 1 2 on bigger lattices require exponentially growing resources. So we develop a quantum computing method to calculate the retarded Green’s function and analyze various systematics of the calculation including j max truncation and finite size effects, Trotter errors and the thermal state preparation efficiency. Our thermal state preparation method still requires resources that grow exponentially with the lattice size, but with a very small prefactor at high temperature. We test our quantum circuit on both the Quantinuum emulator and the IBM simulator for a small lattice and obtain results consistent with the classical computing ones. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Radiation Damage Mitigation in FeCrAl Alloy at Sub-Recrystallization Temperatures

Traditional defect recovery methods rely on high-temperature annealing, often exceeding 750 °C for FeCrAl. In this study, we introduce electron wind force (EWF)-assisted annealing as an alternative approach to mitigate irradiation-induced defects at significantly lower temperatures. FeCrAl samples irradiated with 5 MeV Zr 2+ ions at a dose of 10 14 cm −2 were annealed using EWF at 250 °C for 60 s. We demonstrate a remarkable transformation in the irradiated microstructure, where significant increases in kernel average misorientation (KAM) and low-angle grain boundaries (LAGBs) typically indicate heightened defect density; the use of EWF annealing reversed these effects. X-ray diffraction (XRD) confirmed these findings, showing substantial reductions in full width at half maximum (FWHM) values and a realignment of peak positions toward their original states, indicative of stress and defect recovery. To compare the effectiveness of EWF, we also conducted traditional thermal annealing at 250 °C for 7 h, which proved less effective in defect recovery as evidenced by less pronounced improvements in XRD FWHM values.

FeCrAl alloys↗
DOE OSTI2022

A Search for Predicted Astrometric Microlensing Events by Nearby Brown Dwarfs*

Gravitational microlensing has the potential to provide direct gravitational masses of single, free-floating brown dwarfs, independent of evolutionary and atmospheric models. The proper motions and parallaxes of nearby brown dwarfs can be used to predict close future alignments with distant background stars that cause a microlensing event. Targeted astrometric follow up of the predicted microlensing events permits the brown dwarf’s mass to be measured. Predicted microlensing events are typically found via searching for a peak threshold signal using an estimate of the lens mass. We develop a novel method that finds predicted events that instead will lead to a target lens-mass precision. The main advantage of our method is that it does not require a lens-mass estimate. We use this method to search for predicted astrometric microlensing events occurring between 2014 and 2032 using a catalog of 1225 low-mass star and brown-dwarf lenses in the Solar Neighborhood of spectral type M6 or later and a background source catalog from DECaLS Data Release 9. The background source catalog extends to g = 23.95, providing a more dense catalog compared to Gaia. Our search did not reveal any upcoming microlensing events. We estimate the rate of astrometric microlensing event for brown dwarfs in the Legacy Survey and find it to be low ~10 -5 yr -1 . We recommend carrying out targeted searches for brown dwarfs in front of the Galactic Bulge and Plane to find astrometric microlensing events that will allow the masses of single, free-floating brown dwarfs to be measured.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Magnetized Outflows from Short-lived Neutron Star Merger Remnants Can Produce a Blue Kilonova

Abstract We present a 3D general-relativistic magnetohydrodynamic simulation of a short-lived neutron star remnant formed in the aftermath of a binary neutron star merger. The simulation uses an M1 neutrino transport scheme to track neutrino–matter interactions and is well suited to studying the resulting nucleosynthesis and kilonova emission. A magnetized wind is driven from the remnant and ejects neutron-rich material at a quasi-steady-state rate of 0.8 × 10 −1 M ⊙ s −1 . We find that the ejecta in our simulations underproduce r -process abundances beyond the second r -process peak. For sufficiently long-lived remnants, these outflows alone can produce blue kilonovae, including the blue kilonova component observed for AT2017gfo.

Astronomy & Astrophysics↗
DOE OSTI2026

Diffusion and Solvation Dynamics of Ions in Water: Beyond the Brownian Approximation

The coupled dynamics of ions and water molecules in their first hydration shell impact a variety of processes including ion diffusion, selective ion transport in water-filled nanopores, and the kinetics of ion-pairing, ion adsorption, and metal-ligand binding reactions. In this work, we study these coupled dynamics for alkali metals (Li, Na, K, Rb, Cs), alkaline Earth metals (Mg, Ca, Sr, Ba), and chloride through the lens of their dependence on ion isotopic mass. Results are validated against previous measurements of the isotopic mass-dependence of ion diffusion coefficients in water and previous ab initio calculations of ion high-frequency dynamics in water. We find that the vibrational power spectra of ions in water consistently exhibit either two or three peaks, i.e., ions have several rattling frequencies within their solvations shells as previously reported for a subset of the species examined here. These frequencies have different sensititivies to isotopic mass that may serve as signatures of ion solvation processes (such as the tendency of ions to orient their first-shell water molecules) and that also may relate to Hofmeister-like effects including the relative affinity of different metals for ribonucleic acid (RNA).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Inference of Experimental Radial Impurity Transport on Alcator C-Mod: Bayesian Parameter Estimation and Model Selection.

We present a fully Bayesian approach for the inference of radial profiles of impurity transport coefficients and compare its results to neoclassical, gyrofluid and gyrokinetic modeling. Using nested sampling, the Bayesian Impurity Transport InferencE (BITE) framework can handle complex parameter spaces with multiple possible solutions, offering great advantages in interpretative power and reliability with respect to previously demonstrated methods. BITE employs a forward model based on the pySTRAHL package, built on the success of the well-known STRAHL code [Dux, IPP Report, 2004], to simulate impurity transport in magnetically-confined plasmas. In this paper, we focus on calcium (Ca, Z=20) Laser Blow-Off injections into Alcator C-Mod plasmas. Multiple Ca atomic lines are diagnosed via high-resolution X-ray Imaging Crystal Spectroscopy and Vacuum Ultra-Violet measurements. We analyze a sawtoothing I-mode discharge for which neoclassical and turbulent (quasilinear and nonlinear) predictions are also obtained. We find good agreement in diffusion across the entire radial extent, while turbulent convection and density profile peaking are estimated to be larger in experiment than suggested by theory. Efforts and challenges associated with the inference of experimental pedestal impurity transport are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Understanding Line Losses and Transformer Losses in Rural Isolated Distribution Systems: Preprint

Rural, isolated power systems in the mainland U.S. and in states like Alaska and Hawaii are powered by assets like diesel generators. These rural, isolated power systems also cannot operate at the higher band of medium voltage (like 69kV). They are primarily in the 12 to 14 kV range to keep the cost of the distribution investments lower. Because of this mid-band medium voltage range, the line losses and distribution transformers losses consume significant diesel consumption (almost 10 percent of the peak load). This work considers one such power system powering an isolated system and presents key findings online losses, and transformer losses. Understanding and documenting the impacts is critical for these communities operating their power systems and take actions to reduce expensive diesel consumption. In this paper, we will present one such typical grid and model it in electromagnetic transients (EMT) domain. We used the tower structure, under ground cabling installation to develop high fidelity models of lines. We also used high fidelity models of distribution transformers to present the no-load losses and full load loses. We will also present technical solutions available commercially off-the-shelf to reduce these losses and reduce diesel consumption. This work will be a primer for communities to understand the technical challenges and to understand the possible solution available to solve such challenges for rural, isolated power system operators.

blackstart↗