Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nanoscience and technology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Ion Solvation and Transport in Narrow Carbon Nanotubes: Effects of Polarizability, Cation-π Interaction, and Confinement

Understanding ion solvation and transport under confinement is critical for a wide range of emerging technologies, including water desalination and energy storage. While molecular dynamics (MD) simulations have been widely used to study the behavior of confined ions, considerable deviations between simulation results depending on the specific treatment of intermolecular interactions remain. In the following, we present a systematic investigation of the structure and dynamics of two representative solutions, that is, KCl and LiCl, confined in narrow carbon nanotubes (CNTs) with a diameter of 1.1 and 1.5 nm, using a combination of first-principles and classical MD simulations. Our simulations show that the inclusion of both polarization and cation-π interactions is essential for the description of ion solvation under confinement, particularly for large ions with weak hydration energies. Beyond the variation in ion solvation, we find that cation-π interactions can significantly influence the transport properties of ions in CNTs, particularly for KCl, where our simulations point to a strong correlation between ion dehydration and diffusion. Finally, our study highlights the complex interplay between nanoconfinement and specific intermolecular interactions that strongly control the solvation and transport properties of ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Realizing high-capacity all-solid-state lithium-sulfur batteries using a low-density inorganic solid-state electrolyte

Abstract Lithium-sulfur all-solid-state batteries using inorganic solid-state electrolytes are considered promising electrochemical energy storage technologies. However, developing positive electrodes with high sulfur content, adequate sulfur utilization, and high mass loading is challenging. Here, to address these concerns, we propose using a liquid-phase-synthesized Li 3 PS 4 -2LiBH 4 glass-ceramic solid electrolyte with a low density (1.491 g cm −3 ), small primary particle size (~500 nm) and bulk ionic conductivity of 6.0 mS cm −1 at 25 °C for fabricating lithium-sulfur all-solid-state batteries. When tested in a Swagelok cell configuration with a Li-In negative electrode and a 60 wt% S positive electrode applying an average stack pressure of ~55 MPa, the all-solid-state battery delivered a high discharge capacity of about 1144.6 mAh g −1 at 167.5 mA g −1 and 60 °C. We further demonstrate that the use of the low-density solid electrolyte increases the electrolyte volume ratio in the cathode, reduces inactive bulky sulfur, and improves the content uniformity of the sulfur-based positive electrode, thus providing sufficient ion conduction pathways for battery performance improvement.

25 ENERGY STORAGE↗
DOE OSTI2024

Giant optical nonlinearity of Fermi polarons in atomically thin semiconductors

In this study, realizing strong nonlinear optical responses is a long-standing goal of both fundamental and technological importance. Recently, substantial efforts have been focused on exploring excitons in solids to achieve nonlinearities even down to few-photon levels. However, a crucial tradeoff arises as strong light–matter interactions require large oscillator strength and short radiative lifetime of excitons, which limits their nonlinearity. Here we experimentally demonstrate strong nonlinear optical responses with large oscillator strength by exploiting the coupling between excitons and carriers in an atomically thin semiconductor. By controlling the electric field and electrostatic doping of trilayer WSe 2 , we observe the hybridization between intralayer and interlayer excitons and the formation of Fermi polarons. Substantial optical nonlinearity is observed under continuous-wave and pulsed laser excitation, where the Fermi polaron resonance blueshifts by as much as ~10 meV. Intriguingly, we observe a remarkable asymmetry in the optical nonlinearity between electron and hole doping, which is tunable by the applied electric field. We attribute these features to the optically induced valley polarization due to the interactions between excitons and free charges. Our results establish atomically thin heterostructures as a highly versatile platform for engineering nonlinear optical response with applications to classical and quantum optoelectronics.

2d materials↗
DOE OSTI2022

Amplitude-mode spectroscopy of chemically injected and photogenerated charge carriers in semiconducting single-walled carbon nanotubes

In one-dimensional semiconductors such as conjugated polymers and semiconducting single-walled carbon nanotubes (s-SWCNTs), injected charge carriers (electrons or holes) can have profound impacts on both electronic conductivity and optical spectra, even at low carrier densities. Understanding charge-related spectral features is a key fundamental challenge with important technological implications. Here, we employ a systematic suite of experimental and theoretical tools to understand the mid-infrared charge signatures of heavily p-type doped polymer-wrapped s-SWCNTs. Across a broad range of nanotube diameters, we find that hole charge carriers induce strong Fano anti-resonances in mid-infrared transmission spectra that correspond to defect-related (D-band) and in-plane tangential (G-band) Raman-active vibrational modes, along with anti-resonances arising from infrared (IR)-active polymer and SWCNT modes. We employ 13C isotope-labeled s-SWCNTs and a removable wrapping polymer to clarify the relative intensities, energies, and sources of all observed anti-resonances. Simulations performed with the "amplitude mode model" are used to quantitatively reproduce Raman spectra and also help to explain the outsized intensity of the D-band anti-resonance, relative to the G-band, observed for both moderately and degenerately doped s-SWCNTs. Here, the results provide a framework for future studies of ground- and excited-state charge carriers in s-SWCNTs and a variety of low-dimensional materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Stretchable Photodiodes with Polymer-Engineered Semiconductor Nanowires for Wearable Photoplethysmography

Healthcare systems worldwide have been stressed to provide sufficient resources to serve the increasing and aging population in our society. The situation became more challenging at the time of pandemic. Technology advancement, especially the adoption of wearable health monitoring devices, has provided an important supplement to current clinical equipment. Most health monitoring devices are rigid, however, human tissues are soft. Such a difference has prohibited intimate contact between the two and jeopardized wearing comfortableness, which hurdles measurement accuracy especially during longtime usage. Here, in this work, we report a soft and stretchable photodiode that can conformally adhere onto the human body without any pressure and measure cardiovascular variables for an extended period with higher reliability than commercial devices. The photodiode used a composite light absorber consisting of an organic bulk heterojunction embedded into an elastic polymer matrix. It is discovered that the elastic polymer matrix not only improves the morphology of the bulk heterojunction for obtaining the desired mechanical properties but also alters its electronic band structure and improves the electrical properties that lead to a reduced dark current and enhanced photovoltage in the stretchable photodiode. The work has demonstrated high fidelity measurements and longtime monitoring of heat rate variability and oxygen saturation, potentially enabling next-generation wearable photoplethysmography devices for point-of-care diagnosis of cardiovascular diseases in a more accessible and affordable way.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Reversible assembly of silica nanoparticles at water–hydrocarbon interfaces controlled by SDS surfactant

Achieving reversible and tunable assembly of silica nanoparticles at liquid–liquid interfaces is vital for a wide range of scientific and technological applications including sustainable subsurface energy applications, catalysis, drug delivery and material synthesis. In this study, we report the mechanisms controlling the assembly of silica nanoparticles (dia. 50 nm and 100 nm) at water–heptane and water–toluene interfaces using sodium dodecyl sulfate (SDS) surfactant with concentrations ranging from 0.001–0.1 wt% using operando ultrasmall/small-angle X-ray scattering, cryogenic scanning electron microscopy imaging and classical molecular dynamics simulations. The results show that the assembly of silica nanoparticles at water–hydrocarbon interfaces can be tuned by controlling the concentrations of SDS. Silica nanoparticles are found to: (a) dominate the interfaces in the absence of interfacial SDS molecules, (b) coexist with SDS at the interfaces at low surfactant concentration of 0.001 wt% and (c) migrate toward the aqueous phase at a high SDS concentration of 0.1 wt%. Energetic analyses suggest that the van der Waals and electrostatic interactions between silica nanoparticles and SDS surfactants increase with SDS concentration. However, the favorable van der Waals and electrostatic interactions between the silica nanoparticles and toluene or heptane decrease with increasing SDS concentration. As a result, the silica nanoparticles migrate away from the water–hydrocarbon interface and towards bulk water at higher SDS concentrations. These calibrated investigations reveal the mechanistic basis for tuning silica nanoparticle assembly at complex interfaces.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Recent advances of two-dimensional material additives in hybrid perovskite solar cells

Perovskite solar cells (PSCs) have become one of the state-of-the-art photovoltaic technologies due to their facile solution-based fabrication processes combined with extremely high photovoltaic performance originating from excellent optoelectronic properties such as strong light absorption, high charge mobility, long free charge carrier diffusion length, and tunable direct bandgap. However, the poor intrinsic stability of hybrid perovskites under environmental stresses including light, heat, and moisture, which is often associated with high defect density in the perovskite, has limited the large-scale commercialization and deployment of PSCs. The use of process additives, which can be included in various subcomponent layers in the PSC, has been identified as one of the effective approaches that can address these issues and improve the photovoltaic performance. Among various additives that have been explored, two-dimensional (2D) materials have emerged recently due to their unique structures and properties that can enhance the photovoltaic performance and device stability by improving perovskite crystallization, defect passivation, and charge transport. In this work, we provide a review of the recent progresses in 2D material additives for improving the PSC performance based on key representative 2D material systems, including graphene and its derivatives, transitional metal dichalcogenides, and black phosphorous, providing a useful guideline for further exploiting unique nanomaterial additives for more efficient and stable PSCs in the near future.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Genesis of Active Pt/CeO 2 Catalyst for Dry Reforming of Methane by Reduction and Aggregation of Isolated Platinum Atoms into Clusters

Atomically dispersed metal catalysts offer the advantages of efficient metal utilization and high selectivities for reactions of technological importance. Such catalysts have been suggested to be strong candidates for dry reforming of methane (DRM), offering prospects of high selectivity for synthesis gas without coke formation, which requires ensembles of metal sites and is a challenge to overcome in DRM catalysis. However, investigations of the structures of isolated metal sites on metal oxide supports under DRM conditions are lacking, and the catalytically active sites remain undetermined. Data characterizing the DRM reaction-driven structural evolution of a cerium oxide- supported catalyst, initially incorporating atomically dispersed platinum, and the corresponding changes in catalyst performance are reported. X-ray absorption and infrared spectra show that the reduction and agglomeration of isolated cationic platinum atoms to form small platinum clusters/nanoparticles are necessary for DRM activity. Density functional theory calculations of the energy barriers for methane dissociation on atomically dispersed platinum and on platinum clusters support these observations. Here the results emphasize the need for in-operando experiments to assess the active sites in such catalysts. The inferences about the catalytically active species are suggested to pertain to a broad class of catalytic conversions involving the rate-limiting dissociation of light alkanes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Growth and Performance of High-Quality SWCNT Forests on Inconel Foils as Lithium-Ion Battery Anodes

Large-scale production of vertically aligned single-walled carbon nanotubes (VA-SWCNTs) on metal foils promises to enable technological advancements in many fields, from functional composites to energy storage to thermal interfaces. In this work, we demonstrate growth of high-quality (G/D > 6, average diameters ~ 2–3 nm, densities > 10 12 cm –2 ) VA-SWCNTs on Inconel metal for use as a lithium-ion battery (LIB) anode. Scale-up of SWCNT growth on Inconel 625 to 100 cm 2 exhibits nearly invariant CNT structural properties, even when synthesis is performed near atmospheric pressure, and this robustness is attributed to a growth kinetic regime dominated by the carbon precursor diffusion in the bulk gas mixture. SWCNT forests produced on large-area metal substrates at close to atmospheric pressure possess a combination of structural features that are among the best demonstrated so far in the literature for growth on metal foils. Leveraging these achievements for energy applications, we demonstrate a VA-SWCNT LIB anode with capacity >1200 mAh/g at 1.0C and stable cycling beyond 300 cycles. Furthermore, this robust synthesis of high-quality VA-SWCNTs on metal foils presents a promising route toward mass production of high-performance CNT devices for a broad range of applications.

Energy↗
DOE OSTI2025

Kinetic Investigation by Batch Processing of Film Growth during the Electrodeposition of Titanium from Ethaline

Titanium electrodeposition as a technological advance has been out of reach due to the poor film quality obtained when using previously developed methods. This study shows that the electrodeposition of Ti is possible and feasible from the deep eutectic solvent ethaline. Moreover, this study shows through batch analysis that this deposition has temperature-dependent aspects that alter the film deposition kinetics upon modest heating. This ultraviolet–visible spectroscopic study is highlighting the more facile reduction of Ti 4+ to Ti 3+ and then to Ti 2+ at elevated temperatures. Understanding the underlying kinetics of electrodeposition opens up new venues for the application of this important metal.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The energetics and dynamics of confinement in flexible frameworks and molecular confinement

This project is part of an ongoing and long-term collaboration among Alexandra Navrotsky (who moved recently from UC Davis to Arizona State University), Nancy Ross at Virginia Tech, and Brian Woodfield at Brigham Young University (BYU) on the thermodynamics and lattice dynamics of nanophase and porous materials. Navrotsky emphasizes energetics of formation and guest molecule sorption by ambient and high temperature calorimetry, Woodfield contributes cryogenic heat capacity measurements, and Ross uses inelastic neutron scattering, X-ray and neutron diffraction, and high pressure studies to probe lattice dynamics and phase transitions. Porous frameworks form the chemical and structural basis for critical technologies in separations, catalysis, nuclear waste containment and biomedical applications. Hundreds of zeolites and metal organic frameworks (MOFs) have been synthesized, and their ability to separate and store hydrogen, methane and carbon dioxide has been investigated both experimentally and theoretically. Nevertheless, a fundamental and systematic molecular-level understanding of the thermodynamic and structural factors governing the stability and guest-host interactions in these materials lags behind focused studies of specific systems. Because the guest molecules interact with each other and with the host framework, molecular confinement is a finely balanced and complex phenomenon. The ability of the guest molecules to bind and diffuse through the pores is determined by the nature of the host framework which, in turn, responds to the nature and concentration of guest molecules and to pressure and temperature. The work explores how framework flexibility, tailored by structure, composition, temperature and pressure, is a general phenomenon, similar in nature but variable in extent, in both zeolites and MOFs and is part of a free energy landscape in which framework-guest interactions, pressure, and temperature result in changes in framework geometry and, in some cases, phase transitions. These subtle and/or pronounced changes in lattice geometry, energetics, and dynamics can play a decisive role in confinement and in differentiating the binding of molecules of similar size.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Impact of Iron Species Dispersion on Fe/ZSM–5 Catalyst Performance for Methane Dehydroaromatization (MDA)

Methane dehydroaromatization (MDA) is one of the most promising technologies for directly transforming methane into aromatics. Unlike the extensively investigated Mo/ZSM-5 catalysts, the structure and, consequently, the catalytic activity of Fe/ZSM-5 are markedly influenced by the method of preparation, as shown here. In this study, we prepared 2 % and 4 % Fe/ZSM-5 catalysts via wet impregnation (WI) and incipient wetness impregnation (IWI). Characterizations (XRD, STEM, UV-Vis, NH 3 -TPD and H 2 -TPR) reveal that 2 %Fe-WI mainly possesses isolated or low-polymerized Fe species within zeolite channels, leading to a rapid activation and a higher benzene yield due to the faster reduction to iron suboxides under MDA conditions. In contrast, 2 %Fe-IWI contains bulk iron oxide aggregates, resulting in a slower activation as these aggregates transform into iron carbide through successive reduction and carbonization. Here, a deactivation kinetic study applied to the 2 % catalysts further demonstrates the quantitative relation between Fe site isolation and catalytic activity. Although both 4 % catalysts inevitably form sizable iron oxide clusters and particles due to the high Fe/Al ratio, similar trends are noted, with the WI catalysts exhibiting a shorter induction/activation period and a higher yield of benzene, paralleling observations made with 2 % catalysts.

03 NATURAL GAS↗
DOE OSTI2025

Ion Transport in Self-Assembled Peptoid Membranes with Carbon Nanotube Porin Channels

Artificial membranes that combine high ionic selectivity with mechanical robustness remain a key challenge for next-generation separation technologies. Here, we report ion transport measurements in biomimetic membranes composed of crystalline peptoid nanosheets co-assembled with carbon nanotube porins (CNTPs). Pure peptoid sheets formed defect-free, ion-impermeable membranes, which were then suspended over small SiN x nanopore apertures for ion transport measurements. Incorporation of CNTPs into the peptoid sheet matrix made these membranes ion permeable, with ion conductance values consistent with ion transport through individual and multiple carbon nanotube channels. In conclusion, the modularity and molecular order of peptoid membranes, combined with the exceptional conductance properties of CNTPs, position this platform as a versatile framework for assembling programmable, selective, and robust nanofluidic membranes that can bridge the performance gap between biological and synthetic membrane materials.

Biotechnology↗
DOE OSTI2025

LeaPP: Learning Pathways to Polymorphs through Machine Learning Analysis of Atomic Trajectories

Understanding the mechanisms underlying crystal nucleation and growth is crucial for many technological applications. Due to the short length and time scales involved, crystal nucleation is often studied using molecular simulations. Most existing approaches to extract the nucleation mechanism from simulations focus on the analysis of static snapshots of the configurations, potentially overlooking subtle local fluctuations and the history of the particles involved in the formation of solid nuclei. Here, in this work, we propose a novel methodology called LeaPP that categorizes nucleation trajectories based on the temporal information of their constituent particles. We leverage the time evolution of the local environment of the crystallizing particles to encapsulate the relationship between the structure and dynamics and distinguish between different evolving particle paths. Identification of the distinct particle paths further enables characterizing the nucleation trajectories into different pathways. Collectively, LeaPP provides a more nuanced understanding of nucleation through an unsupervised approach with lesser dependence on traditional order parameters. Furthermore, the pathways identified by LeaPP are predictive of the resulting polymorph. We demonstrate LeaPP on three different systems─Lennard-Jones-like particles, Ni 3 Al, and water on surfaces. The general methodology underlying LeaPP─considering the time evolution of the building blocks─applies to a wide range of self-assembly problems.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A cryogenic near-field thermal diode leveraging superconducting phase transitions

Control of charge and heat transport is essential for computing and thermal management technologies. Recent work with superconducting materials has shown rectified electrical supercurrents near liquid helium temperatures. However, despite large theoretical interest and expected impact on quantum technologies, no experiments have demonstrated control of nanoscale radiative heat currents at cryogenic temperatures. Here we study photon-mediated thermal transport in nanogaps between niobium and gold. Using novel scanning calorimetric probes and nanofabricated devices, we reveal a ~20-fold suppression of radiative heat transport, when niobium transitions from the metallic to the superconducting state. Taking advantage of this effect, we also demonstrate a niobium-based cryogenic thermal diode with a heat rectification ratio of 70%. As a result, the experimental techniques and advances presented here will enable studying nanoscale thermal transport in quantum materials and advancing thermal management of superconducting devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Dithionite Inhibits Iron(III) (Hydr)oxide Formation during Olivine Dissolution Advancing Simultaneous CO 2 Mineralization and Nickel Recovery

Increasing CO 2 concentration poses significant global challenges, impacting both environmental and human health. As we strive for a carbon-neutral energy technology transition, the demand for critical elements (e.g., nickel and cobalt) continues to increase, while high-grade ores are depleting. Combining CO 2 mineralization with the recovery of critical elements from low-grade ores offers an innovative solution. Olivine, a magnesium-rich ultramafic with trace amounts of critical elements, is a promising mineral; however, its impurities, such as iron (Fe(III)), hinder the dissolution of Ni and Mg from olivine, reducing its carbonation and critical element recovery. Here, to address this challenge, this study examined Ni dissolution from San Carlos olivine at high temperatures and high CO 2 pressure. We found that iron(III) (hydr)oxide layers impeded olivine dissolution; however, with sodium dithionite (Na 2 S 2 O 4 ), a reducing agent, olivine dissolution is significantly improved by preventing iron(III) (hydr)oxide formation. With Na 2 S 2 O 4 , within 24 h, Mg and Ni dissolution from olivine increased 2.85-fold and 2.66-fold, respectively, compared to samples without Na 2 S 2 O 4 . After seven cycles, with solutions replaced every 24 h, 98.9% of the total Mg and 84.6% of the total Ni were recovered. This approach enhances olivine’s CO 2 mineralization and improves the sustainability of critical element supply.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Spin Textures at Conformal Surfaces and Interfaces: CRADA Final Report

The scientific and technological exploration of artificially designed three-dimensional magnetic nanostructures opens the path to exciting novel physical phenomena, originating from the increased complexity in spin textures, topology, and frustration in three dimensions. Theory predicts that the equilibrium magnetic ground state of two-dimensional systems which reflects the competition between symmetric (Heisenberg) and antisymmetric (Dzyaloshinskii-Moriya interaction (DMI)) exchange interaction is significantly modified on curved surfaces when the radius of local curvature becomes comparable to fundamental magnetic length scales. In this CRADA we performed collaboratively an experimental study of the spin texture in an 8 nm thin magnetic multilayer with growth-induced in-plane anisotropy and DMI deposited onto the curved surface of a 1.8µm long non-magnetic carbon nanowire with a 67 nm radius. The sample was fabricated in Juelich and with collaborators at BESSY in Berlin. Using magnetic soft x-ray tomography at the ALBA synchrotron in Spain, the three-dimensional spin configuration in this nanotube was retrieved with about 30nm spatial resolution. The transition between two vortex configurations on the two ends of the nanotube with opposite circulation occurs through a domain wall that is aligned at an inclined angle relative to the wire axis. Three-dimensional micromagnetic simulations support the experimental observations and represent a visualization of the curvature-mediated DMI. They also allow a quantitative estimate of the DMI value for the magnetic multilayered nanotube.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Scalable and Quench-Free Processing of Metal Halide Perovskites in Ambient Conditions

With the rise of global warming and the growing energy crisis, scientists have pivoted from typical resources to look for new materials and technologies. Perovskite materials hold the potential for making high-efficiency, low-cost solar cells through solution processing of Earth-abundant materials; however, scalability, stability, and durability remain key challenges. In order to transition from small-scale processing in inert environments to higher throughput processing in ambient conditions, the fundamentals of perovskite crystallization must be understood. Classical nucleation theory, the LaMer relation, and nonclassical crystallization considerations are discussed to provide a mechanism by which a gellan gum (GG) additive—a nontoxic polymeric saccharide—has enabled researchers to produce quality halide perovskite thin-film blade coated in ambient conditions without a quench step. Furthermore, we report on the improved stability and durability properties inherent to these films, which feature improved morphologies and optoelectronic properties compared to films spin-coated in a glovebox with antisolvent. We tune the amount of GG in the perovskite precursor and study the interplay between GG concentration and processability, morphological control, and increased stability under humidity, heat, and mechanical testing. The simplicity of this approach and insensitivity to environmental conditions enable a wide process window for the production of low-defect, mechanically robust, and operationally stable perovskites with fracture energies among the highest obtained for perovskites.

14 SOLAR ENERGY↗