Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cavity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Measurement of individual hydrometeor absorption cross sections utilizing microwave cavity perturbation techniques

A technique for measurement of individual hydrometeor absorption cross sections is presented. Cross sections are inferred by inserting the hydrometeor into a high Q resonant cavity and measuring the Q perturbation. Tests were conducted in a 10.64 GHz, TM(010) cavity. Absorption cross sections were measured at room temperature for 0.5 to 2.0 mm water drops, and were found to agree with the Rayleigh theory. Cross sections were also measured as a function of temperature, and from these the dielectric loss term lm(-K) was inferred for supercooled water down to -17 C.

Hansman, R. J., Jr.↗
NASA NTRS1985

Single mode, short cavity, Pb-salt diode lasers operating in the 5, 10, and 30-microns spectral regions

Pb-salt diode lasers are being used as frequency-tunable infrared sources in high resolution spectroscopy and heterodyne detection applications. Recent advances in short cavity, stripe-geometry laser configurations have led to significant increases in maximum CW operating temperature, single mode operation, and increased single mode tuning range. This paper describes short cavity, stripe geometry lasers operating in the 5, 10, and 30-microns spectral regions, with single mode tuning ranges of over 6/cm.

Linden, K. J.↗
NASA NTRS1985

Experimental performance of a microwave cavity plasma disk ion source

The detailed description and performance characteristics of a microwave ion source are presented. This ion source utilizes an internally tuned, single-mode (or selective multimode) cylindrical cavity applicator to focus and match microwave energy into a disk-shaped discharge zone. The combination of mode focus control and variable, internal cavity matching allows the efficient operation and beam extraction over a wide range of pressures, powers and gaseous inputs. Experimental measurements of ion beam current versus accelerating voltage and input microwave power in xenon and oxygen gas are presented. Ion source specific energy and mass utilization versus experimental variables are also determined. The experimental performance demonstrates the ability of this ion source to extract an ion beam with a well matched, stable, and continuous operation over a wide range of input gases, low pressures, and over input gas flow rates in excess of 100 to a few sccm. Double Langmuir probe measurements in xenon gas indicate high degrees of ionization, and electron and ion concentrations in excess of 100 critical densities in the microwave discharge zone. This ion source has many potential uses such as spacecraft electric propulsion, material ion beam processing, and neutral beam ion sources.

Root, J.↗
NASA NTRS1985

Prediction of Acoustical Response of Three-dimensional Cavities Using an Indirect Boundary Element Method

A technique which characterizes the acoustics of generalized cavities with the minimum model possible is developed. All boundary element methods have two advantages over finite element methods: (1) the models are smaller; and (2) the assumed variable behavior, inherent in the method to allow discretization, is harmonic rather than polynomial. Further, IBEM often requires one rather than two numerical boundary integrals as required by DBEM. Thus, a quadratic, isoparametric IBEM program was developed. The source distribution in this solution is continuous and quadratically variable rather than continuous and constant. The program was also formulated to include the additional capability of interior point sources and impedance boundary conditions. To test the quadratic, isoparametric IBEM program, several simple cavity enclosure problems where studied. Results are shown.

Bernhard, R. J.↗
NASA NTRS1986

Active Cavity Radiometer (ACR)

The active cavity radiometer (ACR) measures the total solar irradiance to determine the magnitude and direction of variations in the total solar radiative output. The ACR is an electrically self calibrating cavity pyroheliometer capable of measuring the total solar irradiance with an absolute accuracy better than 0.2% and capable of detecting changes in the total irradiance smaller than 0.001%. The data will be used to study the physical behavior of the Sun and the Earth's climate.

Moore, R.↗
NASA NTRS1986

Prediction of sound fields in cavities using boundary element methods

Two boundary element formulations of acoustical behavior exist; the Direct Boundary Element Methods (DBEM) based on the Helmholtz Integral Equations and the Indirect Boundary Element Methods (IBEM) based on Huygen's Principle. In this investigation, both methods are implemented utilizing a simple linear superparametric element. In addition the IBEM is studied using a quadratic isoparametric element. The accuracy and relative efficiency of the various techniques are examined. In order to properly model aircraft interior cavities the additional capability to model wall treatments and internal point sources is added to the methods. The procedures are verified for several well-understood cavity problems. The relative merits of each boundary element method and the finite element method are examined.

Bernhard, R. J.↗
NASA NTRS1987

Computational and experimental investigation of cavity flowfields

This paper presents a computational and experimental investigation of supersonic flow past a cavity in a flat plate. The source of the particular interest in this problem is the ongoing study of the aerodynamic interference effects between a separating store and its bay in the parent body. An upwind relaxation scheme, utilizing flux vector splitting and line-Gauss-Seidel iterations, is used to solve Reynolds-averaged Navier-Stokes equations. Spatial discretizations of this two-dimensional analysis are based on implicit and finite-volume methods. Turbulence is modeled and shocks are captured. The flowfield of the symmetry plane at the half-width is computationally visualized and all flow properties are computed. Experimental tests are conducted in the Langley Unitary Plan Wind Tunnel to measure wall pressures and to capture schlieren photographs. Qualitative as well as quantitative data of computations and experiments agree very well. These two vehicles of investigation are merged to show open, closed and transitional cavity flow behaviors.

Baysal, O.↗
NASA NTRS1987

Distributed feedback modes in a partially filled ring cavity

The threshold longitudinal modes of a structure composed of a ring cavity partially filled with a distributed feedback (DFB) medium have been studied. An eigenvalue equation and dispersion relation for the propagation constant, threshold gain, and mode location are derived and numerically solved for a number of cases. It is shown that the incommensurate nature of the unfilled ring cavity eigenfrequencies and DFB eigenfrequencies can lead to an enhancement of the frequency selectivity of the distributed feedback laser. The analysis is extended to consider finite linewidth and dispersion.

Rabinovich, William S.↗
NASA NTRS1987

Application of the CSCM method to the design of wedge cavities

This paper describes the application of the conservative supra characteristic method (CSCM) to predict the flow around two-dimensional slot injection cooled cavities in hypersonic flow. Seven different numerical solutions are presented that model three different experimental designs. The calculations manifest outer flow conditions including the effects of nozzle/lip geometry, angle of attack, nozzle inlet conditions, boundary and shear layer growth and turbulance on the surrounding flow. The calculations were performed for analysis prior to wind tunnel testing for sensitivity studies early in the design process. Qualitative and quantitative understanding of the flows for each of the cavity designs and design recommendations are provided. The present paper demonstrates the ability of numerical schemes, such as the CSCM method, to play a significant role in the design process.

Venkatapathy, Ethiraj↗
NASA NTRS1988

Tunable Microwave Cavity For Ion Source

Movable probe and tuning wall adjusted to obtain resonance at microwave frequency used to generate plasma in cell at one end of microwave cavity. Electroless discharge without disadvantages of dc-cathode-discharge and RF-induction methods. To achieve precise positioning, coaxial probe extends into microwave cavity through tube.

Nakanishi, Shigeo↗
NASA NTRS1987

Electromagnetic fields backscattered from an s-shaped inlet cavity with an absorber coating on its inner walls

The EM backscatter from a two-dimensional S-shaped inlet cavity is analyzed using three different techniques, namely a hybrid combination of asymptotic high frequency and modal methods, an integral equation method, and the geometrical optics ray method, respectively. This inlet has a thin absorber coating on its perfectly conducting inner walls and the planar interior termination is made perfectly conducting. The effect of the absorber on the inner wall is treated via a perturbation scheme in the hybrid approach where it is assumed that the loss is sufficiently small for the method to be valid. The results are compared with the backscatter from a straight inlet cavity to evaluate the effect of offsetting the termination in the S-bend configuration such that it is not visible from the open end of the inlet. The envelope of the backscatter pattern for the straight inlet is always seen to peak around the forward axis due to the large return from the directly visible termination, and the pattern envelope tapers off away from the forward axis. Offsetting the termination causes the envelope of the backscatter pattern to flatten out, thereby reducing the return near the forward axis by several dB. The absorber coating reduces the pattern level of the straight inlet in directions away from the forward axis but has little effect on the peak near the axis; furthermore, the absorber coating is seen to consistently reduce the backscatter from the S-bend inlet for almost all incidence angles. The hybrid method gives excellent agreement with experimental data and with the integral equation solution, whereas, the geometrical optics ray tracing method is able to generally predict the average of the bachscatter pattern but not the pattern details.

Burkholder, R. J.↗
NASA NTRS1988

Asymptotic modal analysis and statistical energy analysis of an acoustic cavity

A basic asymptotic theory for structural wall/acoustic cavity interaction is presented, and the analysis is illustrated with examples of the acoustic cavity response to a prescribed wall motion. Although, when spatially averaged, the classical modal analysis (CMA) response approaches the asymptotic modal analysis (AMA) response more rapidly as the number of modes increases, it is shown that information about local response intensification is lost in the averaging process. A larger bandwidth at a given center frequency is found to contain more excited modes than a smaller bandwidth; however, the AMA is slightly more accurate in the smaller bandwidth. All AMA asymptotes were shown to be approached from below by a CMA with fixed bandwidth and increasing center frequency.

Kubota, Y.↗
NASA NTRS1988

Folded cavity design for a ruby resonator

A folded cavity laser resonator operating in the TEM(00) mode has been built and tested. The new oscillator configuration leads to an increase in efficiency and to better line narrowing due to the increased number of passes through the laser rod and tuning elements, respectively. The modification is shown to lead to cavity ruggedization.

Arunkumar, K. A.↗
NASA NTRS1989

Efficient Cavity-Dumped, Frequency-Doubled Nd:YAG Laser

New design expected to increase efficiency of cavity-dumped, frequency-doubled Nd:YAG laser. Frequency doubled outside primary laser resonator, and portion of fundamental-frequency light not used by doubler returned to primary laser cavity to increase efficiency. Applications of laser foreseen in data communictions, laser ranging, studies of atmosphere, remote sensing, and laboratory studies.

Robinson, D. L.↗
NASA NTRS1988

Resonant flow in small cavities submerged in a boundary layer

Experiments were performed to determine the conditions under which a narrow-frequency-band flow excitement could be sustained in a row of small transverse square cavities while the boundary layer in which they were submerged was already turbulent. This is shown to happen when the depth of the Stokes layer generated by monochromatic freestream disturbances is nearly the same as the cavity depth. This indicates that viscous waves can exist in thin layers adjacent to the surface under a turbulent boundary layer.

Bandyopadhyay, P. R.↗
NASA NTRS1989

Generation and propagation of kilometric radiation in the auroral plasma cavity

The two-dimensional particle simulations and three-dimensional ray-tracing calculations presently used to characterize the generation and propagation of EM radiation due to the auroral plasma cavity's electron cyclotron maser instability incorporate a continuous flow of primary energetic electrons along the magnetic field. The magnetic field gradient is found to be unimportant in accounting for various quasi-local properties of the maser instability. The maser instability can produce the observed amplification of auroral kilometric radiation above cosmic background levels within a distance smaller than the dimensions of the auroral cavity.

Pritchett, P. L.↗
NASA NTRS1989

Asymptotic modal analysis of a rectangular acoustic cavity and characterization of its intensification zones

Asymptotic modal analysis (AMA) is used to study a rectangular cavity with a flexible vibrating portion on one wall and five rigid walls. The agreement between mean square pressure levels of the cavity interior calculated from classical modal analysis and from the AMA method improved as the number of responding modes increased. It is shown that intensification effects were due to both the excitation location and the response location.

Peretti, Linda F.↗
NASA NTRS1989

Comparison of the measured and predicted response of the Earth Radiation Budget Experiment active cavity radiometer during solar observations

The Earth Radiation Budget Experiment consists of an array of radiometric instruments placed in earth orbit by the National Aeronautics and Space Administration to monitor the longwave and visible components of the earth's radiation budget. Presented is a dynamic electrothermal model of the active cavity radiometer used to measure the earth's total radiative exitance. Radiative exchange is modeled using the Monte Carlo method and transient conduction is treated using the finite element method. Also included is the feedback circuit which controls electrical substitution heating of the cavity. The model is shown to accurately predict the dynamic response of the instrument during solar calibration.

Mahan, J. R.↗