Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Kinetic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Kinetic Monte Carlo Simulation of Cation Diffusion in Low-K Ceramics

Low thermal conductivity (low-K) ceramic materials are of interest to the aerospace community for use as the thermal barrier component of coating systems for turbine engine components. In particular, zirconia-based materials exhibit both low thermal conductivity and structural stability at high temperature, making them suitable for such applications. Because creep is one of the potential failure modes, and because diffusion is a mechanism by which creep takes place, we have performed computer simulations of cation diffusion in a variety of zirconia-based low-K materials. The kinetic Monte Carlo simulation method is an alternative to the more widely known molecular dynamics (MD) method. It is designed to study "infrequent-event" processes, such as diffusion, for which MD simulation can be highly inefficient. We describe the results of kinetic Monte Carlo computer simulations of cation diffusion in several zirconia-based materials, specifically, zirconia doped with Y, Gd, Nb and Yb. Diffusion paths are identified, and migration energy barriers are obtained from density functional calculations and from the literature. We present results on the temperature dependence of the diffusivity, and on the effects of the presence of oxygen vacancies in cation diffusion barrier complexes as well.

Good, Brian↗
NASA NTRS2016

Budget of Turbulent Kinetic Energy in a Shock Wave Boundary-Layer Interaction

Implicit large-eddy simulation (ILES) of a shock wave/boundary-layer interaction (SBLI) was performed. Quantities present in the exact equation of the turbulent kinetic energy transport were accumulated and used to calculate terms like production, dissipation, molecular diffusion, and turbulent transport. The present results for a turbulent boundary layer were validated by comparison with direct numerical simulation data. It was found that a longer development domain was necessary for the boundary layer to reach an equilibrium state and a finer mesh resolution would improve the predictions. In spite of these findings, trends of the present budget match closely with that of the direct numerical simulation. Budgets for the SBLI region are presented at key axial stations. These budgets showed interesting dynamics as the incoming boundary layer transforms and the terms of the turbulent kinetic energy budget change behavior within the interaction region.

shock wave/boundary-layer interaction↗
NASA NTRS2017

Kinetic Damage from Meteorites

Comparing the natural meteorite flux at the Earth's surface to that of space debris, reentering debris is approx. 2 orders of magnitude less of a kinetic hazard at all but the very largest (and therefore rarest) sizes compared to natural impactors. Debris re-entries over several metric tonnes are roughly as frequent as natural impactors, but the survival fraction is expected to be much higher. Kinetic hazards from meteorites are very small, with only one recorded (indirect) injury reported. We expect fatalities to be even more rare, on the order of one person killed per several millennia. That several reports exist of small fragments/sand hitting people during meteorite falls is consistent with our prediction that this should occur every decade or so.

Cooke, W.↗
NASA NTRS2017

Electron Heating at Kinetic Scales in Magnetosheath Turbulence

We present a statistical study of coherent structures at kinetic scales, using data from the Magnetospheric Multiscale mission in the Earths magnetosheath. We implemented the multi-spacecraft partial variance of increments (PVI) technique to detect these structures, which are associated with intermittency at kinetic scales. We examine the properties of the electron heating occurring within such structures. We find that, statistically, structures with a high PVI index are regions of significant electron heating. We also focus on one such structure, a current sheet, which shows some signatures consistent with magnetic reconnection. Strong parallel electron heating coincides with whistler emissions at the edges of the current sheet.

Chasapis, Alexandros↗
NASA NTRS2017

Kinetic Damage from Meteorites

Comparing the natural meteorite flux at the Earth's surface to that of space debris, re-entering debris is ~2 orders of magnitude less of a kinetic hazard at all but the very largest (and therefore rarest) sizes compared to natural impactors. Debris re-entries over several metric tonnes are roughly as frequent as natural impactors, but the survival fraction is expected to be much higher. Kinetic hazards from meteorites are very small, with only one recorded (indirect) injury reported. We expect fatalities to be even more rare, on the order of one person killed per several millennia. That several reports exist of small fragments/sand hitting people during meteorite falls is consistent with our prediction that this should occur every decade or so.

Cooke, W.↗
NASA NTRS2016

The Effects of Consistent Chemical Kinetics Calculations on the Pressure-Temperature Profiles and Emission Spectra of Hot Jupiters

In this work we investigate the impact of calculating non-equilibrium chemical abundances consistently with the temperature structure for the atmospheres of highly-irradiated, close-in gas giant exoplanets. Chemical kinetics models have been widely used in the literature to investigate the chemical compositions of hot Jupiter atmospheres which are expected to be driven away from chemical equilibrium via processes such as vertical mixing and photochemistry. All of these models have so far used pressure-temperature (P-T) profiles as fixed model input. This results in a decoupling of the chemistry from the radiative and thermal properties of the atmosphere, despite the fact that in nature they are intricately linked. We use a one-dimensional radiative-convective equilibrium model, ATMO, which includes a sophisticated chemistry scheme to calculate P-T profiles which are fully consistent with non-equilibrium chemical abundances, including vertical mixing and photochemistry. Our primary conclusion is that, in cases of strong chemical disequilibrium, consistent calculations can lead to differences in the P-T profile of up to 100 K compared to the P-T profile derived assuming chemical equilibrium. This temperature change can, in turn, have important consequences for the chemical abundances themselves as well as for the simulated emission spectra. In particular, we find that performing the chemical kinetics calculation consistently can reduce the overall impact of non-equilibrium chemistry on the observable emission spectrum of hot Jupiters. Simulated observations derived from non-consistent models could thus yield the wrong interpretation. We show that this behaviour is due to the non-consistent models violating the energy budget balance of the atmosphere.

planets and satellites↗
NASA NTRS2018

Kinetic Properties of an Interplanetary Shock Propagating Inside a Coronal Mass Ejection

We investigate the kinetic properties of a typical fast-mode shock inside an interplanetary coronal mass ejection (ICME) observed on 1998 August 6 at 1 au, including particle distributions and wave analysis with the in situ measurements from Wind. Key results are obtained concerning the shock and the shock-ICME interaction at kinetic scales: (1) gyrating ions, which may provide energy dissipation at the shock in addition to wave-particle interactions, are observed around the shock ramp; (2) despite the enhanced proton temperature anisotropy of the shocked plasma, the low plasma beta inside the ICME constrains the shocked plasma under the thresholds of the ion cyclotron and mirror-mode instabilities; (3) whistler heat flux instabilities, which can pitch-angle scatter halo electrons through a cyclotron resonance, are observed around the shock, and can explain the disappearance of bi-directional electrons (BDEs) inside the ICME together with normal betatron acceleration; (4) whistler waves near the shock are likely associated with the whistler heat flux instabilities excited at the shock ramp, which is consistent with the result that the waves may originate from the shock ramp; (5) the whistlers share a similar characteristic with the shocklet whistlers observed by Wilson et al., providing possible evidence that the shock is decaying because of the strong magnetic field inside the ICME.

Liu, Mingzhe↗
NASA NTRS2018

Estimation of Lower-Body Kinetics from Loading Profile and Kinematics Alone, Without Measured Ground Reaction Forces

Biomechanical models of human motion can estimate kinetic outcomes, such as joint moments, joint forces and muscle forces. Typically, one performs an inverse dynamics (ID) analysis to compute joint moments from joint angles and measured external forces. Sometimes it is impractical to measure ground reaction forces and moments (GRF&M). We devised an empirical method for performing ID analysis of resistance exercises without measured GRF&M. The method solves the multibody dynamics equations of motion with four key assumptions about the GRF&M that reduce the number of unknowns. The assumptions are 1) negligible ground reaction moments, 2) fixed lateral/medial location of the center of pressure (COP), 3) equal fore/aft location of the COP between the feet, and 4) constant angle of the GRF vector relative to the vertical axis in the frontal plane. We used evaluation trials from a spaceflight countermeasure resistance training device to test this approach. Four participants performed squat and deadlift exercises at various loads. We compared results from traditional ID analysis to results without measured GRF&M using our method. We found that joint moment trajectories in the sagittal plane were qualitatively similar in shape between the two methods, and the amount of root mean squared error (RMSE), measured by difference in joint moment impulse, was typically under 10 percent. Non-sagittal joint moment trajectories, which are much lower in overall magnitude, were not qualitatively similar in shape between the two methods. Non-sagittal moments displayed much higher RMSE, with typical values well over 50 percent. These findings were further supported by validation metrics (Sprague and Geers' P and M metrics, Pearson's r correlation coefficient). Based on these findings, we concluded that useful kinetic results are obtained from ID analysis of squat and deadlift exercises, even when GRF&M are not measured, as long as the outcomes of interest lie in the sagittal plane.

computational modeling↗
NASA NTRS2019

Effect of Loading Configuration on Kinematics and Kinetics for Deadlift and Squat Exercises: Case Study in Modeling Exercise Countermeasure Device for Astronauts

This study compares squat and deadlift exercises performed with two different loading configurations: 1) on a novel single-cable resistance exercise countermeasure device (ECD) for spaceflight and 2) with free weights. The results compare joint kinematics and kinetics between different loading configurations for each exercise, and also between the two exercises for each loading configuration. Single-cable versions of the squat (using a harness) and deadlift (using a T-bar) performed on the Hybrid Ultimate Lifting Kit (HULK) ECD have significantly different sagittal plane joint angle kinematics (both peak angle and range of motion) as well as joint kinetics (both peak joint moment and joint impulse) vs. their free weight equivalents at the same load. Differences also exist in hip abduction and rotation. Overall, the single-cable configurations tend to reduce peak joint angles, ranges of motion, peak joint moment and joint impulse vs. free weights. A notable exception is the lumbar joint, which is more heavily loaded for single-cable squats vs. free weight squats. This may have implications for both training benefit and possible risk of injury. Deadlift and squat exercises work the lower body musculature in different ways, with the deadlift emphasizing hip and lumbar extension and the squat emphasizing knee extension. Based on these findings, we would advocate the use of both movements in the exercise prescriptions of astronaut crews on deep-space missions.

Resistance Exercise↗
NASA NTRS2019

Mechanism of Reconnection on Kinetic Scales Based on Magnetospheric Multiscale Mission Observations

We examine the role that ions and electrons play in reconnection using observations from the Magnetospheric Multiscale (MMS) mission on kinetic ion and electron scales, which are much shorter than magnetohydrodynamic scales. This study reports observations with unprecedented high resolution that MMS provides for magnetic field (7.8 ms) and plasma (30 ms for electrons and 150 ms for ions). We analyze and compare approaches to the magnetopause in 2016 November, to the electron diffusion region in the magnetotail in 2017 July followed by a current sheet crossing in 2018 July. Besides magnetic field reversals, changes in the direction of the flow velocity, and ion and electron heating, MMS observed large fluctuations in the electron flow speeds in the magnetotail. As expected from numerical simulations, we have verified that when the field lines and plasma become decoupled a large reconnecting electric field related to the Hall current (1–10 mV/m) is responsible for fast reconnection in the ion diffusion region. Although inertial accelerating forces remain moderate (1–2 mV/m), the electric fields resulting from the divergence of the full electron pressure tensor provide the main contribution to the generalized Ohm’s law at the neutral sheet (as large as 200 mV/m). In our view, this illustrates that when ions decouple electron physics dominates. The results obtained on kinetic scales may be useful for better understanding the physical mechanisms governing reconnection processes in various magnetized laboratory and space plasmas.

W. M. Macek↗
NASA NTRS2017

Kinetics of Moisture Sorption and Reverse Bias Degradation in Chip Tantalum Capacitors

Exposure of chip MnO2 tantalum capacitors to humid environments might result in increased ESR, leakage currents, and first turn-on failures. However, there is a lack of literature data on the effect of moisture on reverse bias behavior of the parts. The presence of moisture can also result in pop-corning when a high water vapor pressure develops when moisture absorbed in pores of tantalum slugs vaporizes instantly during soldering process resulting in damage to capacitors. A study of kinetics of moisture ingress to and release from active elements of capacitors would allow a better understanding of degradation mechanisms and is important for preventing failures. In this work, a technique for investigation of moisture sorption and desorption in solid chip tantalum capacitors that employs tantalum slugs as a humidity sensor have been developed and kinetics of the process analyzed for different types of capacitors at temperatures from room to 125 ºC. A model that relates diffusion characteristics of polymer cases and size of the slugs to characteristic times of moisture sorption has been developed. A strong effect of moisture on long-term degradation of reverse bias currents in MnO2 cathode capacitors has been demonstrated and physical mechanisms discussed.

Teverovsky, Alexander↗
NASA NTRS2017

Kinetics of Moisture Sorption and Reverse Bias Degradation in Chip Tantalum Capacitors

Exposure of chip MnO2 tantalum capacitors to humid environments might result in increased ESR, leakage currents, and first turn-on failures. However, there is a lack of literature data on the effect of moisture on reverse bias behavior of the parts. The presence of moisture can also result in pop-corning when a high water vapor pressure develops when moisture absorbed in pores of tantalum slugs vaporizes instantly during soldering process resulting in damage to capacitors. A study of kinetics of moisture ingress to and release from active elements of capacitors would allow a better understanding of degradation mechanisms and is important for preventing failures. In this work, a technique for investigation of moisture sorption and desorption in solid chip tantalum capacitors that employs tantalum slugs as a humidity sensor have been developed and kinetics of the process analyzed for different types of capacitors at temperatures from room to 125 C. A model that relates diffusion characteristics of polymer cases and size of the slugs to characteristic times of moisture sorption has been developed. A strong effect of moisture on long-term degradation of reverse bias currents in MnO2 cathode capacitors has been demonstrated and physical mechanisms discussed.

Teverovsky, Alexander↗
NASA NTRS1996

A generalized Biomass Pyrolysis Model Based on Superimposed Cellulose, Hemicellulose and Lignin Kinetics

The pyrolysis of general biomass materials is modeled via a superposition of cellulose, hemicellulose an lingnin kinetics. All three of the primary biomass components are modeled with multi-step kinetics involving both competetive primary pyrolysis and secodary tar decomposition reactions. Only typical (untreated) feedstocks are considered at atmospheric pyrolysis pressures.

biomass↗
NASA NTRSDate not supplied

Triple Oxygen Isotope Kinetics of Sulfate From Pyrite Oxidation

Sulfates from low temperature terrestrial and marine environments are out of equilibrium with their oxygen sources. Instead, oxygen isotope compositions of sulfate imply they are dominated by kinetic signatures of oxidative and reductive processes (Killingsworth et al., 2022) that are under-constrained compared to equilibrium effects (Hayles and Killingsworth, 2022). Consequently, the specific role of pyrite oxidation in setting the oxygen isotope composition of sulfate is also under-constrained. This scenario inhibits a more nuanced understanding of small variations in the oxygen isotopes of sulfate and their implications for tracing oxygen sources and sulfur cycle transformations, particularly in low-temperature relatively sulfate-limited freshwater systems such as rivers, lakes, aquifers, and mining-affected environments. To alleviate these knowledge gaps, we conduct pyrite oxidation experiments at time scales spanning minutes to years, analyze the triple oxygen isotope compositions (∆ 17 O and δ 18 O) of sulfate products, and interpret results using molecular modeling. Our preliminary results show isotopic relationships of 1) pyrite-derived sulfate ∆ 17 O reaching above the meteoric water line as its δ 18 O becomes lighter than water, and 2) sulfate ∆ 17 O and δ 18 O extending between water and O 2 . From these results we interpret a kinetic isotope effect between sulfate and water and mixing between sulfate end members containing most of their oxygen atoms from water and from O 2 .

Oxygen isotopes↗
NASA NTRS2021

Particle Acceleration by Dense Impulsive Structures Moving in Ambient Magnetospheric Plasma. 3-D Hybrid Kinetic Modeling and MMS Observations

High resolution observations of dense plasma impulsive structures moving through an ambient background magnetospheric flows were captured by the Magnetospheric Multiscale mission. The observations show particle heating and acceleration, shock-like wave formation, and whistler wave excitation inside the interface between the dense impulsive plasma structures and the ambient plasma. A multiscale hybrid kinetic simulation provides an explanation of the observed wave-particle interactions with the assumption that the dense plasma structures may be represented by plasma clouds which are formed at the magnetopause layer due to reconnection processes. Plain Language Summary: Dense, impulsive plasma structures moving through a background plasma were captured by the NASA Magnetospheric Multiscale mission. The observations show that the dense structures can generate strong perturbations in the electromagnetic field and shock-like waves. Interactions between these electromagnetic waves and the particles results in particle acceleration. 3-D hybrid kinetic modeling (particle description for ions and fluid description for electrons) was used to investigate the plasma physics of the observed structures. It was assumed that the plasma clouds were formed by magnetic field reconnection inside the magnetopause, which is the interface between the solar wind particles and the cold low-density magnetospheric plasma. The work helps us understand the plasma environment at the interface between the Earth and solar wind, near planetary moons, within astrophysical explosions, and possibly at the interface between the solar wind and local interstellar medium.

A. S. Lipatov↗