Engineering PapersSearch

SEARCH · Engineering Papers

Results for “surface abnormalities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Characterization of defect growth structure in ion plated films by scanning electron microscopy

Copper and gold films (0.2 to 2 microns) were ion plated onto polished 304-stainless-steel surfaces. These coatings were examined by scanning electron microscopy for coating growth defects. Three types of defects were distinguished: nodular growth, abnormal or runaway growth, and spits. The cause and origin for each type of defect was traced. Nodular growth is primarily due to inherent substrate microdefects, abnormal or runaway growth is due to external surface inclusions, and spits are due to nonuniform evaporation. All these defects have adverse effects on the coatings. They induce stresses and produce porosity in the coatings and thus weaken their mechanical properties. Friction and wear characteristics are affected by coating defects, since the large nodules are pulled out and additional wear debris is generated.

Spalvins, T.

Teamwork in the Terminal Area: Organizational Issues and Solutions

Dynamic growth and technology advances in commercial aviation have turned the terminal area into a complex, multi-organization workplace which requires the smooth coordination of many operational teams. In addition to pilots, cabin crew, air traffic controllers, and dispatch (who nominally work together throughout a flight), surface operations additionally involve local, ground and ramp controllers, ramp agents, maintenance, dozens of service contractors, and any number of teams who are responsible for airport operations. Under abnormal or emergency conditions, even more teams become actively involved. In order to accommodate growth and to meet productivity and safety challenges, numerous changes are being made in surface operations. Unfortunately, it is often the case that changes in technologies, organizational roles, procedures, and training are developed and implemented in isolated and piecemeal fashion without regard to cross organizational impact. Thus, there is a need for evaluation methodologies which assure integrated system safety for all organizations. Such methodologies should aid the understanding of how organizations work together and how changes in one domain affects the next. In this study, we develop one approach toward addressing these organizational issues. Examples of surface operations in abnormal situations are examined in regard to their impact on personnel in the terminal area. Timelines are given for the responses to incidents, along with the necessary communication links, the specific roles that members of terminal teams have, and any overlapping responsibilities. Suggestions to improve cross-operational teamwork are given. Methods of graphic representation are explored, both in regards to human links and access to information. The outcome of such an approach should enhance the understanding which is critical for resolving organizational conflicts and maximizing system effectiveness.

Parke, Bonny K.

Mapping the Red Planet

Since September 1997 the Mars Global Surveyor spacecraft has been orbiting the planet Mars and acquiring new data about the red planet that is changing our view of its present state and past history. Except for a few weeks in October 1997 and a few months in the Spring/Summer of 1998 when special science operations were conducted the spacecraft spent the first 18 months if its time at Mars getting to the right orbital geometry for the mapping mission. But on March 1, 1999 the MGS spacecraft trained its instruments onto the planet to begin a full Mars year (684 Earth days) of continuous systematic mapping and observation of the planet. The camera began wide angle and high resolution mapping, the thermal emission spectrometer began sensing the atmosphere and the material properties of the surface, the magnetometer searched out regions of abnormally high magnetism, the altimeter began determining the precise shape of the planet, and the radio science experiment began determining atmospheric pressures, temperatures and mapping the planet's gravity field. In a matter of a month more data was acquired about

Smith, David E.

An unusual mare feature, part N

During rapid scanning of the Apollo 15 panoramic camera photography, a peculiar feature was noted in a small patch of mare material lying between the Haemus and the Apennine Mountains. The patch is abnormal in that it is an unbordered plateau with the surface appearing to lie several hundred meters above adjacent mare patches. Significant characteristics of the feature are discussed and two panoramic camera photographs are illustrated.

Whitaker, E. A.

Effect of a Pacific sea surface temperature anomaly on the circulation over North America

During the fall and winter of 1976-1977, sea surface temperature (SST) in the north Pacific was characterized by abnormally cold temperatures in the central and western portions of the north Pacific with a warm pool located off the west coast of the U.S. It was suggested that the north Pacific SST anomalies were one of the multiple causes of the abnormally cold temperatures in eastern North America during the 1976-1977 winter. An attempt was made to test this hypothesis by conducting a numerical experiment with the GLAS general circulation model.

Shukla, J.

Maine Ecological Forecasting III: Utilizing Earth Observations to Monitor Federally Endangered Atlantic Salmon (Salmo salar) Habitat in Maine: An Interactive Workshop

Shifting patterns in land use and land cover (LULC), temperature, and precipitation have exacerbated a rapid decline in Federally Endangered wild Atlantic salmon (Salmo salar) populations. The team at NASA DEVELOP partnered with the Maine Department of Marine Resources (DMR) and the Downeast Salmon Federation (DSF) to create a comprehensive workshop designed to demonstrate the applicability of Earth observations in examining these threats using the Penobscot, Union, and Machias Rivers as case studies. This entailed curating tutorials for acquiring and analyzing satellite data using Google Earth Engine, EarthExplorer, and Earthdata. The team demonstrated how to classify LULC in ArcGIS Pro from 1985 until 2021 using Landsat 5 Thematic Mapper (TM), Landsat 8 Operation Land Imager (OLI), Sentinel-2 MultiSpectral Instrument (MSI), and datasets from the United Stated Geological Survey (USGS) National Land Cover Database (NLCD), showing an overall transition from coniferous forests to other LULC classes. The team also demonstrated how to use historical data from Terra Moderate Resolution Imaging Spectroradiometer (MODIS) and Integrated Multi-satellite Retrievals for Global Precipitation Measurement (GPM IMERG) to generate 2021 land surface temperature (LST) and precipitation maps, respectively, showing that Maine was abnormally dry during the summer in an increasingly warm region. These workshop materials will aid the partners in integrating NASA Earth observations into their future salmon habitat restoration initiatives.

Jonathan Falciani

Simplified fabrication of back surface electric field silicon cells and novel characteristics of such cells

An investigation of the characteristics and behavior of 10 ohm-cm silicon cells having abnormally high open-circuit voltages was made. The cells studied were made by a new, highly simplified, contact fabrication process which creates both a contact and a thin electric field region at the cell back surface without the need for phosphorus layer removal. These cells had open-circuit voltages of about 0.58 V and their performance as a function of thickness, temperature, and 1 MeV electron irradiation is detailed. The study showed that 10 ohm-cm back-surface-field cells can have the high initial efficiencies and desirable temperature behavior of low resistivity cells. Thin back-surface-field cells were made and showed, in addition, much greater radiation damage resistance. A mechanism is proposed to explain the results.

Mandelkorn, J.

Simplified fabrication of back surface electric field silicon cells and novel characteristics of such cells.

An investigation of the characteristics and behavior of 10 ohm-cm silicon cells having abnormally high open-circuit voltages was made. The cells studied were made by a new, highly simplified, contact fabrication process which creates both a contact and a thin electric field region at the cell back surface without the need for phosphorus layer removal. These cells had open-circuit voltages of about 0.58 V and their performance as a function of thickness, temperature, and 1 MeV electron irradiation is detailed. The study showed that 10 ohm-cm back-surface-field cells can have the high initial efficiencies and desirable temperature behavior of low resistivity cells. Thin back-surface-field cells were made and showed, in addition, much greater radiation damage resistance. A mechanism is proposed to explain the results.

Mandelkorn, J.

Molecular Genetics of Root Thigmoresponsiveness in Arabidopsis thaliana

The molecular mechanisms that allow plant roots to use gravity and touch as growth guides are investigated. We are using a molecular genetic strategy in Arabidopsis thaliana to study these processes. When Arabidopsis thaliana seedlings grow on tilted hard-agar surfaces, their roots develop a wavy pattern of growth which appears to derive from a succession of left-handed and right-handed circumnutation-like processes triggered by gravity and touch stimulation (Okada and Shimura, 1990; Rutherford et al., 1998; Rutherford and Masson, 1996). Interestingly, mutations that affect root waving on tilted hard-agar surfaces can be identified and characterized. Some of these mutations affect root gravitropism, while others appear to be responsible for the production of abnormal waves (no waves, compressed or square waves, coils) without affecting gravitropism. The specific objectives of this project were to functionally characterize two genes (WVD2 and WVD6) which are required for root waving on tilted agar surfaces, but not for root gravitropism. Specific objectives included a physiological and cytological analysis of the mutants, and molecular cloning and characterization of the corresponding genes. As summarized in this paper, we have reached these objectives. We have also identified and partially characterized other mutations that affect root skewing on hard-agar surfaces (sku5-1 and ago1), and have completed our work on the root-wave phenotype associated with mutations in genes of the tryptophan biosynthesis pathway (Lynn et al., 1999; Rutherford et al., 1998; Sedbrook et al., 2000, 2002). We briefly describe our progress on the cloning and characterization of WVD6, WVD2 and SKU5, and provide a list of papers (published, or in preparation) that derived from this grant. We also discuss the biological implications of our findings, with special emphasis on the analysis of WVD2.

Masson, Patrick H.

SEM Characterization of Extinguished Grains from Plasma-Ignited M30 Charges

M30 propellant grains that had been ignited in interrupted closed bomb experiments were characterize by scanning electron microscopy (SEM). Previous chemical analysis of extinguished grains had given no indications of plasma-propellant chemical interactions that could explain the increased burning rates that had been previously observed in full-pressure closed bomb experiments. (This does not mean that there is no unique chemistry occurring with plasma ignition. It may occur very early in the ignition event and then become obscured by the burning chemistry.) In this work, SEM was used to look at grain morphologies to determine if there were increases in the surface areas of the plasma-ignited grains which would contribute to the apparent increase in the burning rate. Charges were made using 30 propellant grains (approximately 32 grams) stacked in two tiers and in two concentric circles around a plastic straw. Each grain was notched so that, when the grains were expelled from the bomb during extinguishment, it could be determined in which tier and which circle each grain was originally packed. Charges were ignited in a closed bomb by either a nickel wire/Mylar-capillary plasma or black powder. The bomb contained a blowout disk that ruptured when the pressure reached 35 MPa, and the propellant was vented into a collection chamber packed with polyurethane foam. SEM analysis of the grains fired with a conventional black powder igniter showed no signs of unusual burning characteristics. The surfaces seemed to be evenly burned on the exteriors of the grains and in the perforations. Grains that had been subjected to plasma ignition, however, had pits, gouges, chasms, and cracks in the surfaces. The sides of the grains closest to the plasma had the greatest amount of damage, but even surfaces facing the outer wall of the bomb had small pits. The perforations contained gouges and abnormally burned regions (wormholes) that extended into the web. The SEM photos indicated that a grain from the top tier, which was farther away from the plasma ignition source, sustained more plasma-induced damage to the perforations and the web than did the grains on the bottom tier.

Kinkennon, A.

Maine Ecological Forecasting: Using NASA Earth Observations to Assess Federally Endangered Atlantic Salmon Habitat in Maine

Atlantic salmon (Salmo salar) is a species of anadromous fish that was historically prevalent throughout the New England region. Overfishing and habitat loss caused a severe decline in the salmon population, restricting North America’s remaining wild Atlantic salmon to rivers in Maine. Land use and land cover (LULC) change and factors associated with temperature and precipitation are important for understanding the suitability of freshwater habitat for juvenile salmon. In collaboration with the Maine Department of Marine Resources and the Downeast Salmon Federation, the team utilized NASA Earth observations to aid partners in understanding how these factors change in relation to critical salmon habitat. Landsat 5 Thematic Mapper (TM) and Landsat 8 Operational Land Imager (OLI) imagery was analyzed to assess changes in LULC between 1985 and 2021. Terra Moderate Resolution Imaging Spectroradiometer (MODIS) and Integrated Multi-satellite Retrievals for Global Precipitation Measurement (GPM IMERG) data were used to determine land surface temperature and precipitation, respectively; between 2000 and 2020. Lastly, temperature and precipitation anomaly maps visualized deviation from the 20-year climatic average for each pixel. LULC analysis for 1985 to 2020 showed a loss of forest cover throughout critical salmon habitat although gains in forested area were also observed. Assessment of mean summer land surface temperature revealed an increase in temperature from 2000 to 2020 and anomaly maps highlighted areas experiencing abnormally high or low summer precipitation and temperature. These results and the underlying data were packaged for the partner organizations to inform future conservation efforts.

Michael Corley

Flight set 360L007 (STS-33R) field joint protection system, thermal protection system, and systems tunnel components, volume 7

The performance of the thermal protection system, field joint protection system, and systems tunnel components of flight set 360L007 is presented as evaluated by postflight hardware inspection. The condition of both motors was similar to previous flights. Four aft edge strikes were noted on the ground environment instrumentation thermal protection system. The hits all left a clean substrate, indicating that the damage was caused by nozzle severance debris and/or water impact. No National Space Transportation System debris criteria for missing thermal protection system were violated. Two problem reports were written against the field joint protection system. The first concerned two cracks in the K5NA closeout over the trunnion/vent valve location on the left-hand aft field joint. A similar condition was observed on Flight 5 (360H005). The second problem report referred to a number of small surface cracks between two impact marks on the left-hand forward field joint. Neither area exhibited loose material or any abnormal heat effects, and they have no impact on flight safety.

Source record

Remote Sensing of Terrestrial Water Storage and Application to Drought Monitoring

Terrestrial water storage (TWS) consists of groundwater, soil moisture and permafrost, surface water, snow and ice, and wet biomass. TWS variability tends to be dominated by snow and ice in polar and alpine regions, by soil moisture in mid-latitudes, and by surface water in wet, tropical regions such as the Amazon (Rodell and Famiglietti, 2001; Bates et al., 2007). Drought may be defined as a period of abnormally dry weather long enough to cause significant deficits in one or more of the TWS components. Thus, along with observations of the agricultural and socioeconomic impacts, measurements of TWS and its components enable quantification of drought severity. Each of the TWS components exhibits significant spatial variability, while installation and maintenance of sufficiently dense monitoring networks is costly and labor-intensive. Thus satellite remote sensing is an appealing alternative to traditional measurement techniques. Several current remote sensing instruments are able to detect variations in one or more TWS variables, including the Advanced Microwave Scanning Radiometer (AMSR) on NASA's Aqua satellite and the Moderate Resolution Imaging Spectroradiometer (MODIS) on NASA's Terra and Aqua. Future satellite missions have been proposed to improve this capability, including the European Space Agency's Soil Moisture Ocean Salinity mission (SMOS) and the Soil Moisture Active Passive (SMAP), Surface Water Ocean Topography (SWOT), and Snow and Cold Land Processes (SCLP) missions recommended by the US National Academy of Science's Decadal Survey for Earth Science (NRC, 2007). However, only one remote sensing technology is able to monitor changes in TWS from the land surface to the base of the deepest aquifer: satellite gravimetry. This paper focuses on NASA's Gravity Recovery and Climate Experiment mission (GRACE; http://www.csr.utexas.edu/grace/) and its potential as a tool for drought monitoring.

Rodell, Matt

Reflectance spectra of Fe(2+)-Mg(2+) disordered pyroxenes: Implications to remote-sensed spectra of planetary surfaces

The reflectance spectra of Fe(2+)-Mg(2+) disordered orthopyroxenes are relevant to surfaces of terrestrial planets onto which basaltic magma has been extruded. If cooling rates of basalt lava flows were fast, equilibrium iron intersite partitioning may not have been achieved so that abnormal enrichments of Fe(2+) ions in M1 sites would occur. The two intense pyroxene Fe(2+) site CF bands in the 1 micron and 2 micron regions would continue to dominate the the reflectance spectra so that the pyroxene composition and structure type would be readily identified in telescopic spectral profiles. However, abnormal intensification of the Fe(2+)/M1 site CF band at 1.20 microns could lead to the false identification of olivine in remote sensed spectra because in pyroxene-olivine mixtures the inflection around 1.20 microns is the only spectral feature for detecting the presence of olivine. The identification of iron-bearing plagioclase feldspars, too, would be obscured by the pyroxene Fe(2+)/M1 site CF band at 1.20 microns. Such interference would be a major problem if in situ reflectance spectra could be measured on the surface of Venus where ambient temperatures are as high as 475 C. Disordering of Fe(2+) and Mg(2+) ions comparable to that in the orthopyroxenes used in this spectral chemical study might be expected in low Ca pyroxenes occurring on the Venusian surface. Researchers conclude that Fe(2+)/M1 site spectral features need to be carefully assessed in remote-sensed spectra before deductions are made about the presence of olivine on planetary surfaces.

Burns, Roger G.

Loadcell supports for a dynamic force plate

An apparatus was developed to accurately measure components of force along three mutually perpendicular axes, torque, and the center of pressure imposed by the foot of a subject walking over its surface. The data obtained were used to supplement high-speed motion picture and electromyographic (EMG) data for in-depth studies of normal or abnormal human gait. Significant features of the design (in particular, the mechanisms used to support the loadcell transducers) are described. Results of the development program and typical data obtained with the device are presented and discussed.

Keller, C. W.

The Abnormally Hot June 2021 in the Western U.S.: A MERRA-2 perspective

An extreme heat wave occurred over much of the western US and Canada in late June 2021. We use daily and monthly near-surface temperature from MERRA-2 Reanalysis to compare the hot conditions of this year with the previous 40 years, particularly over the northwestern US that was severely affected.

T2m

Behavior of deep convective clouds in the tropical Pacific deduced from ISCCP radiances

The characteristic features, the diurnal cycle, and the spatial distribution of deep convection over the equatorial Pacific and the relationship of deep convection to SST and surface-wind convergence were examined using a combined visible-IR (VS-IR) threshold method and an IR-only threshold method for diagnosing deep convection clouds (DCCs). Results suggest that deep convection is latitudinally confined to a much smaller spatial scale than that suggested by maps of outgoing long-wave radiation. The results suggested that there are two types of relationships between deep convection, SST, and surface-wind convergence: the west Pacific type and the east Pacific type. The latter relationship is observed in the east Pacific only when SST is not abnormally warm.

Fu, Rong

Achieving High-Yield Conversion of Janus Transition Metal Dichalcogenides on Diverse Substrates

Janus transition metal dichalcogenides (TMDCs) with intrinsic broken mirror symmetry and vertical dipole moment provide an additional degree of freedom to manipulate material symmetry down to atomic-layer thickness. However, despite advances in synthesis strategies, fundamental understanding of this atomic substitution process remains limited, which has impeded their implementation in advanced devices. Here, by using a room-temperature atomic-layer substitution (RT-ALS) strategy, we systematically investigate the critical factors facilitating the high-yield conversion of Janus TMDCs on diverse substrates. Combining Raman spectroscopy probes, X-ray photoelectron spectroscopy (XPS) measurements, and density functional theory (DFT) calculations, we demonstrate that substrates with enhanced electron doping or larger surface polarity substantially benefit the conversion of Janus TMDCs reaching a near-unity yield. Intriguingly, the strong affinity between Janus TMDCs and substrates (e.g., Au) brings about abnormal Raman spectroscopic phenomena. These findings highlight the significance of substrates in achieving the reliable synthesis of Janus two-dimensional materials with improved homogeneity on various substrates. In addition, this takes us one step closer to utilizing Janus TMDCs as a versatile platform in next-generation optoelectronic devices, sensors, and quantum technologies.

Doping