Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solar flux model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Radiation and phase change of lithium fluoride in an annulus

A one-dimensional thermal model is developed to evaluate the effect of radiation on the phase change of lithium-fluoride (LiF) in an annular canister under gravitational and microgravitational conditions. Specified heat flux at the outer wall of the canister models focused solar flux; adiabatic and convective conditions are considered for the inner wall. A two-band radiation model is used for the combined-mode heat transfer within the canister, and LiF optical properties relate metal surface properties in vacuum to those in LiF. For axial gravitational conditions, the liquid LiF remains in contact with the two bounding walls, whereas a void gap is used at the outer wall to model possible microgravitational conditions. For the adiabatic cases, exact integrals are obtained for the time required for complete melting of the LiF. Melting was found to occur primarily from the outer wall in the 1-g model, whereas it occurred primarily from the inner wall in the mu-g model. For the convective cases, partially melted steady-state conditions and fully melted conditions are determined to depend on the source flux level, with radiation extending the melting times.

Lund, Kurt O.↗
NASA NTRS1991

Effects of Mg II and Ca II ionization on ab-initio solar chromosphere models

Acoustically heated solar chromosphere models are computed considering radiation damping by (non-LTE) emission from H(-) and by Mg II and Ca II emission lines. The radiative transfer equations for the Mg II k and Ca II K emission lines are solved using the core-saturation method with complete redistribution. The Mg II k and Ca II K cooling rates are compared with the VAL model C. Several substantial improvements over the work of Ulmschneider et al. (1987) are included. It is found that the rapid temperature rises caused by the ionization of Mg II are not formed in the middle chromosphere, but occur at larger atmospheric heights. These models represent the temperature structure of the 'real' solar chromosphere much better. This result is a major precondition for the study of ab-initio models for solar flux tubes based on MHD wave propagation and also for ab-initio models for the solar transition layer.

Rammacher, W.↗
NASA NTRS1994

Effects of heavy-element settling on solar neutrino fluxes and interior structure

We consider the effects of gravitational settling of both He and heavier elements on the predicted solar neutrino fluxes and interior sound speed and density profiles. We find that while the structural changes that result from the inclusion of both He and heavy-element settling are only slightly larger than the changes resulting from the inclusion of He settling alone, the additional increases in expected neutrino fluxes are of comparable size. Our preferred model with both He and heavy-element settling has neutrino count rates of 9.0 SNU for Cl-37 detectors and 137 SNU for Ga-71 detectors, as compared to 7.1 and 127 SNU for a comparable model without any diffusive separation, or 8.0 and 132 SNU for a model that includes He settling alone. We suggest that the correction factors by which the predicted neutrino fluxes of solar models calculated without including the effects of diffusion should be multiplied are 1.25 +/- 0.08 for Cl detectors, 1.07 +/- 0.02 for Ga detectors, and 1.28 +/- 0.09 for the B-8 flux (1 sigma errors). Comparison of internal sound speed and density profiles strongly suggests that the additional changes in calculated p-mode oscillation frequencies due to the inclusion of heavy-element settling will be small compared to the changes that result from He settling alone, especially for the higher degree modes. All models with diffusive separation give much better agreement with the observed depth of the convection zone than do nondiffusive models. The model that includes both He and heavy-element settling requires an initial He mass fraction Y = 0.280 and has a surface He abundance of Y = 0.251 at the solar age.

Proffitt, Charles R.↗
DOE OSTI2026

Modeling and Experimental Demonstration of Flux Spreading in Light Trapping Planar-Cavity Solar Enclosed Particle Receivers

This study experimentally validates and numerically models the flux-spreading effect in a light-trapping planar-cavity solar receiver) for particle-based concentrating solar power systems. The receiver's shallow cavity with vertical planar walls redistributes concentrated solar flux, reducing peak intensity and achieving uniform heat flux. On-sun tests at National Renewable Energy Laboratory's High-Flux Solar Furnace under flux up to 1500 kW/m2 measured cavity wall temperatures, which were compared with Monte Carlo ray-tracing (SolTrace) and computational numerical simulations. Three angular absorptance models were evaluated: constant absorptance, a Pyromark-based directional model, and a Fresnel-based Cr2O3 model. The Fresnel-derived model showed the best agreement with experiments, achieving high correlation (PC > 0.85), structural similarity (SSIM > 0.98), and signal-to-noise ratios (PSNR > 40 dB), with temperature prediction errors of 1-11%. Results confirm that flux spreading mitigates local overheating and validate the integrated modeling approach, supporting the solar receiver scalability for high-efficiency, high-temperature concentrating solar power applications.

14 SOLAR ENERGY↗
NASA NTRS1978

A two-dimensional solar model

A two-dimensional, nearly flux constant solar atmosphere which includes a physical model of granulation is presented. If the inhomogeneous character of the solar photosphere is neglected in the construction of empirical models, the result is an underestimate of the temperature gradient in the layers below a Rosseland optical depth of 0.5 and an overestimate of the convective flux penetration into the observable layers. The two-dimensional model adequately reproduces the mean limb darkening, the magnitude and center-to-limb variation of the intensity fluctuations, and the rms vertical and horizontal convective velocities.

Nelson, G. D.↗
NASA NTRS1976

The photochemistry of ammonia in the Jovian atmosphere

A reinvestigation of the ammonia photochemistry in the Jovian lower atmosphere above the cloud tops is conducted in connection with certain questions concerning the model proposed by Strobel (1973). Chemical reactions and their rate coefficients are considered along with the model atmosphere, solar fluxes, the continuity equations, and numerical details. Differences between the newmodel and Strobel's model are related to more moderate ammonia depletion relations. The height profiles of H, NH2, N2H3, N2H4, and NH3 concentrations are presented in a graph.

Prasad, S. S.↗
NASA NTRS2011

Time Exceedances for High Intensity Solar Proton Fluxes

A new model is presented for the total time during a space mission that specified solar proton flux levels are exceeded. It is applicable to any time period during the solar cycle and covers a broad proton energy range for both shielded and unshielded conditions.

Xapsos, Michael A.↗
NASA NTRS1994

Accurate modeling of F-region electron densities

In the past year, we have made considerable progress in a number of areas including algorithm development, completion of two major case studies, and the development of a new EUV flux model. As a result, there has been a major improvement in our ability to model global emissions in support of NASA's imaging plans. Activity highlights include the following: developed a new algorithm to allow physical models to reproduce observed NmF2; investigated the relationship between NmF2 and F10.7 at Millstone Hill during 1990; developed a new solar EUV flux model; statistical survey of anomalously high nighttime electron T(sub e) at Millstone Hill; conducted a case study of the March 1990 magnetic storm; and conducted a comparison between theory and data of magnetically quiet behavior of the winter ionosphere at Millstone Hill.

Source record↗
NASA NTRS1989

Tracing Rays In A Solar Power System

OFFSET is ray-tracing computer code for analysis of optics of solar collector. Code models distributions of solar flux within receiver cavity, produced by reflections from collector. Developed to model mathematically offset solar collector of solar dynamic electric power system being developed for Space Station Freedom. Used to develop revised collector-facet concept of four groups of toroidally contoured facets. Also used to develop methods for tailoring distribution of flux incident on receiver. Written in FORTRAN 77 (100 percent).

Jefferies, Kent↗
NASA NTRS2008

Development of Solar Wind Model Driven by Empirical Heat Flux and Pressure Terms

We are developing a time stationary self-consistent 2D MHD model of the solar corona and solar wind as suggested by Sittler et al. (2003). Sittler & Guhathakurta (1999) developed a semiempirical steady state model (SG model) of the solar wind in a multipole 3-streamer structure, with the model constrained by Skylab observations. Guhathakurta et al. (2006) presented a more recent version of their initial work. Sittler et al. (2003) modified the SG model by investigating time dependent MHD, ad hoc heating term with heat conduction and empirical heating solutions. Next step of development of 2D MHD models was performed by Sittler & Ofman (2006). They derived effective temperature and effective heat flux from the data-driven SG model and fit smooth analytical functions to be used in MHD calculations. Improvements of the Sittler & Ofman (2006) results now show a convergence of the 3-streamer topology into a single equatorial streamer at altitudes > 2 R(sub S). This is a new result and shows we are now able to reproduce observations of an equatorially confined streamer belt. In order to allow our solutions to be applied to more general applications, we extend that model by using magnetogram data and PFSS model as a boundary condition. Initial results were presented by Selwa et al. (2008). We choose solar minimum magnetogram data since during solar maximum the boundary conditions are more complex and the coronal magnetic field may not be described correctly by PFSS model. As the first step we studied the simplest 2D MHD case with variable heat conduction, and with empirical heat input combined with empirical momentum addition for the fast solar wind. We use realistic magnetic field data based on NSO/GONG data, and plan to extend the study to 3D. This study represents the first attempt of fully self-consistent realistic model based on real data and including semi-empirical heat flux and semi-empirical effective pressure terms.

Sittler, Edward C., Jr.↗
NASA NTRS1982

A three-component model of the variability of the solar ultraviolet flux 145-200 nM

The variability of the ultraviolet flux between 145 and 200 nm over both the eleven-year cycle and the 27-day solar rotation period is examined in terms of chromospheric activity, as determined from ground-based observations of the CaII K chromosphere. A three-component model of the solar UV flux is developed which includes the contributions to the full disk flux from both plage and active network emission. Solar cycle and solar rotation variations derived from the model are compared with the results of satellite and rocket experiments and with the two-component model of Cook et al (1980). Finally, possible ways of improving the model are discussed.

Lean, J. L.↗
DOE OSTI2024

A Planar-Cavity Receiver Configuration for High-Temperature Solar Thermal Processes: Preprint

Next generation concentrating solar thermal power (CSP) and novel solar thermochemical systems using concentrating solar thermal (CST) energy require high operating temperatures exceeding those of traditional nitrate-salt CSP systems. Particle-based systems are attractive for next-generation CSP and CST applications owing to high-temperature stability of inert silica- or alumina-based particulate materials, the lack of low-temperature freezing concerns that limit molten salt and/or molten metal heat transfer media, and cost-effective thermal storage using low-cost particulate and containment materials. Open-cavity falling particle receivers have many potential advantages, but face challenges pertaining to scalability, thermal loss, and particle loss through the open aperture, and are infeasible for chemical processes that require a low-oxygen ambient environment. Enclosed receiver configurations can be scalable, avoid particle loss when heating particles, and have potential for future chemical processes; however, particle-based heat transfer media provide substantially lower heat transfer rates than liquid media, and thus enclosed particle receiver designs require novel configurations to limit surface temperatures under the high incident solar flux concentrations necessary for high receiver thermal efficiency at high temperature. This paper introduces the novel planar-cavity enclosed particle receiver configuration in which arrays of planar surfaces are arranged into sub-vertical cavities. Large angles between the panel surface normal vectors and the aperture surface normal allow the incoming solar beam to distribute along the panel walls. Correspondingly, a high incident solar flux concentration at the cavity aperture produces substantially lower absorbed solar flux concentration on any panel wall. Sets of individual vertical cavities can be arranged to form a scalable receiver configuration.

cavity receiver↗
NASA NTRS1992

Calculations of surface radiation in arid regions - A case study

The surface and satellite data measured during the preliminary field experiment for the Land-Atmosphere Interactions Experiment conducted at the Heihe River basin in western China are used to investigate the difficulties encountered in the derivation of the surface radiation budget in arid regions. The surface radiation is derived by coupling theoretical radiative transfer calculations with satellite cloud retrievals. For cloud-free cases, the modeled downward solar fluxes are systematically larger than the measured fluxes. It is found that the error can be reduced and that good agreement between the computed and measured surface solar fluxes can be obtained by using an aerosol single-scattering albedo of 0.5 and an optical thickness of about 0.2 in the afternoon hours. For all the cases studied when both surface and satellite data are available, the mean errors are 4.3 and -4.7 W/sq m for the net downward surface solar flux and the downward surface IR flux, respectively. The rms errors are 17.4 and 22.1 W/sq m for the respective surface fluxes. The importance of aerosols in surface radiation calculations is underscored.

Chou, Ming-Dah↗
NASA NTRS1991

Future mission studies: Forecasting solar flux directly from its chaotic time series

The mathematical structure of the programs written to construct a nonlinear predictive model to forecast solar flux directly from its time series without reference to any underlying solar physics is presented. This method and the programs are written so that one could apply the same technique to forecast other chaotic time series, such as geomagnetic data, attitude and orbit data, and even financial indexes and stock market data. Perhaps the most important application of this technique to flight dynamics is to model Goddard Trajectory Determination System (GTDS) output of residues between observed position of spacecraft and calculated position with no drag (drag flag = off). This would result in a new model of drag working directly from observed data.

Ashrafi, S.↗
NASA NTRS1974

Empirical solar proton model for orbiting spacecraft applications

An empirical model for energetic solar proton fluxes is presented. With this model the effects of such protons on geocentric space missions, to be flown during the next solar active period (1977-1983), and with orbits involving partial magnetospheric shielding, may be estimated. A synoptic background review is given, followed by a detailed discussion of the model's use, errors, uncertainties, and limitations, including sample calculations which demonstrate the application of specific or general project missions. Finally, for circular trajectories, percentage exposure maps are presented, depicting fractional mission times spent outside particular L shells as functions of orbit altitude and inclination.

Stassinopoulos, E. G.↗