Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “profiles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Intercomparison of NIMBUS 7 solar backscattered ultraviolet ozone profiles with rocket, balloon, and Umkehr profiles

A global ozone data set covering the two years from November 1978 until October 1980, with an average of 1200 profiles per day, has been produced and archived from the solar backscattered ultraviolet (SBUV) instrument flown on the NIMBUS 7 spacecraft. The SBUV ozone profiles are compared with measurements from chemical and optical sensors launched on balloons and rockets and with ozone profiles obtained from the ground-based Dobson spectrophotometers using the Umkehr method. The biases between the SBUV results and the balloon and Umkehr results are generally less than 10 percent. These biases are functions of layer height and latitude and are believed to be largely due to inconsistencies in the ozone absorption cross sections used for the various measurement systems. The precision of the SBUV measurements is found to be better than 8 percent for pressures between 1 and 64 mbar and better than 15 percent from 64 to 253 mbar.

Bhartia, P. K.↗
NASA NTRS2015

Assimilation of Wind Profiles from Multiple Doppler Radar Wind Profilers for Space Launch Vehicle Applications

Atmospheric wind data are required by space launch vehicles in order to assess flight vehicle loads and performance on day-of-launch. Space launch ranges at NASA's Kennedy Space Center co-located with the United States Air Force's (USAF) Eastern Range (ER) at Cape Canaveral Air Force Station and USAF's Western Range (WR) at Vandenberg Air Force Base have extensive networks of in-situ and remote sensing instrumentation to measure atmospheric winds. Each instrument's technique to measure winds has advantages and disadvantages in regards to use within vehicle trajectory analyses. Balloons measure wind at all altitudes necessary for vehicle assessments, but two primary disadvantages exist when applying balloon output. First, balloons require approximately one hour to reach required altitudes. Second, balloons are steered by atmospheric winds down range of the launch site that could significantly differ from those winds along the vehicle ascent trajectory. These issues are mitigated by use of vertically pointing Doppler Radar Wind Profilers (DRWPs). However, multiple DRWP instruments are required to provide wind data over altitude ranges necessary for vehicle trajectory assessments. The various DRWP systems have different operating configurations resulting in different temporal and spatial sampling intervals. Therefore, software was developed to combine data from both DRWP-generated profiles into a single profile for use in vehicle trajectory analyses. This paper will present details of the splicing software algorithms and will provide sample output.

Decker, Ryan K.↗
NASA NTRS2015

Assimilation of Wind Profiles from Multiple Doppler Radar Wind Profilers for Space Launch Vehicle Applications

Space launch vehicles utilize atmospheric winds in design of the vehicle and during day-of-launch (DOL) operations to assess affects of wind loading on the vehicle and to optimize vehicle performance during ascent. The launch ranges at NASA's Kennedy Space Center co-located with the United States Air Force's (USAF) Eastern Range (ER) at Cape Canaveral Air Force Station and USAF's Western Range (WR) at Vandenberg Air Force Base have extensive networks of in-situ and remote sensing instrumentation to measure atmospheric winds. Each instrument's technique to measure winds has advantages and disadvantages in regards to use for vehicle engineering assessments. Balloons measure wind at all altitudes necessary for vehicle assessments, but two primary disadvantages exist when applying balloon output on DOL. First, balloons need approximately one hour to reach required altitude. For vehicle assessments this occurs at 60 kft (18.3 km). Second, balloons are steered by atmospheric winds down range of the launch site that could significantly differ from those winds along the vehicle ascent trajectory. Figure 1 illustrates the spatial separation of balloon measurements from the surface up to approximately 55 kft (16.8 km) during the Space Shuttle launch on 10 December 2006. The balloon issues are mitigated by use of vertically pointing Doppler Radar Wind Profilers (DRWPs). However, multiple DRWP instruments are required to provide wind data up to 60 kft (18.3 km) for vehicle trajectory assessments. The various DRWP systems have different operating configurations resulting in different temporal and spatial sampling intervals. Therefore, software was developed to combine data from both DRWP-generated profiles into a single profile for use in vehicle trajectory analyses. Details on how data from various wind measurement systems are combined and sample output will be presented in the following sections.

Decker, Ryan K.↗
NASA NTRS2019

Joint Assimilation of the Aura Microwave Limb Sounder and Ozone Mapping and Profiler Suite Limb Profiler Data: Towards a Reanalysis of Stratospheric Ozone for Trend Studies

The future trajectory of the stratospheric ozone recovery will be sensitive to greenhouse gas concentrations through thermal control of chemical loss and via stratospheric circulation changes. The latter in particular is subject to considerable uncertainty meriting continuing monitoring of the evolution of ozone throughout the depth of the stratosphere. Atmospheric reanalyses utilize the data assimilation methodology to obtain comprehensive representations of the state of the atmosphere, including its composition, on multidecadal scales by combining diverse measurements from satellite-borne and conventional data sources. Systematic biases among these various data types pose a challenge for assimilation by introducing spurious discontinuities that affect the utility of reanalyses for studies of long-term variability and trends.In this presentation we will outline an approach, developed at NASA's Global Modeling and Assimilation Office (GMAO), that allows joint assimilation of stratospheric ozone profiles from the Microwave Limb Sounder (MLS) on EOS Aura and the Ozone Mapping and Profiler Suite Limb Profiler (OMPS-LP) currently flying on the Suomi-NPP satellite with future missions projected into the 2030s. We will demonstrate that a simple offline correction significantly reduces biases between MLS and OMPS-LP ozone data providing a strategy for generating a long-term vertically resolved homogenized representation of stratospheric ozone in future reanalyses. One novel element of our approach compared to previous GMAO reanalysis is the use of a version of the Goddard Earth Observing System model with full stratospheric chemistry. We will show selected comparisons of MLS and OMPS-LP assimilation experiments with independent ozonesonde and satellite data as well as two examples of process-based evaluation focused on the 2016 QBO disruption and Arctic winter ozone loss focusing on the relative performance of the MLS and OMPS-LP analyses.

Wargan, K.↗
NASA NTRSDate not supplied

Comparisons of ozone profile retrievals from the OMPS Limb Profiler and ACE-FTS

The OMPS Limb Profiler (OMPS LP) was launched in October 2011, and has more than 10 years of overlap with ACE-FTS. Therefore, ACE-FTS offers an excellent opportunity to obtain independent ozone profile data with which to validate OMPS LP ozone retrievals. In this study we utilize ACE-FTS ozone retrievals to evaluate 10 years of OMPS LP profile measurements processed with the new NASA GSFC version 2.6 retrieval algorithm. The OMPS LP is a solar scattering instrument that makes observations in the sunlit portion of the Earth, whilst ACE-FTS is a solar occultation instrument that measures ozone only at sunrise and sunset. To account for these differences in measurement times we use the Goddard Diurnal Ozone Climatology (GDOC). Diurnal adjustments using this climatology have been shown to help reduce biases above 30 km. Our analysis shows that biases between OMPS LP v2.6 and ACE-FTS v5.2 are <10% between 18 and 45 km, and increase above and below these altitudes. The vertical patterns of the differences are similar across different latitudes and seasons, with larger seasonal variations observed in the Northern Hemisphere. We also analyze ozone time series from the two instruments.

Atmospheric Science, Stratospheric Ozone↗
NASA NTRS1979

Early detection of disease: The correlation of the volatile organic profiles from patients with upper respiratory infections with subjects of normal profiles

A method is described whereby a transevaporator is used for sampling 60-100 microns of aqueous sample. Volatiles are stripped from the sample either by a stream of helium and collection on a porous polymer, Tenax, or by 0.8 ml of 2-chloropropane and collected on glass beads. The volatiles are thermally desorbed into a precolumn which is connected to a capillary gas chromatographic column for analysis. The technique is shown to be reproducible and suitable for determining chromatographic profiles for a wide variety of sample types. Using a transevaporator sampling technique, the volatile profiles from 70 microns of serum were obtained by capillary column gas chromatography. The complex chromatograms were interpreted by a combination of manual and computer techniques and a two peak ratio method devised for the classification of normal and virus infected sera. Using the K-Nearest Neighbor approach, 85.7 percent of the unknown samples were classified correctly. Some preliminary results indicate the possible use of the method for the assessment of virus susceptibility.

Zlatkis, A.↗
NASA NTRS2005

In Situ Aerosol Profile Measurements and Comparisons with SAGE 3 Aerosol Extinction and Surface Area Profiles at 68 deg North

Under funding from this proposal three in situ profile measurements of stratospheric sulfate aerosol and ozone were completed from balloon-borne platforms. The measured quantities are aerosol size resolved number concentration and ozone. The one derived product is aerosol size distribution, from which aerosol moments, such as surface area, volume, and extinction can be calculated for comparison with SAGE III measurements and SAGE III derived products, such as surface area. The analysis of these profiles and comparison with SAGE III extinction measurements and SAGE III derived surface areas are provided in Yongxiao (2005), which comprised the research thesis component of Mr. Jian Yongxiao's M.S. degree in Atmospheric Science at the University of Wyoming. In addition analysis continues on using principal component analysis (PCA) to derive aerosol surface area from the 9 wavelength extinction measurements available from SAGE III. Ths paper will present PCA components to calculate surface area from SAGE III measurements and compare these derived surface areas with those available directly from in situ size distribution measurements, as well as surface areas which would be derived from PCA and Thomason's algorithm applied to the four wavelength SAGE II extinction measurements.

Source record↗
NASA NTRS1980

STS-1 operational flight profile. Volume 4: Onorbit profile-cycle 3.1.1

The orbital flight test (OFT) phase of the shuttle program consists of four orbital flights beginning in November 1980and continuing through 1981. The major purpose of the OFT program is to demonstrate and verify shuttle systems and flight capabilities by satisfying the OFT requirements, is presented. The onorbit portion of the operational flight profile (OFP) for the first Space Transportation System-1 (STS-1) flight is presented. This onorbit document (volume 4) is one in a series that, taken together, will define the STS-1 OFP. This OFP onorbit document represents a combination of the STS-1 ground rules and constraints and the initialization data. The STS-1 flight activities described reflect the trajectory, consumable, crew activity, and flight requirement baseline as of May 1, 1980. Flight plans for the ascent, onorbit, and descent phases of the test flight are presented.

Source record↗
NASA NTRS2011

Improvement of OMI Ozone Profile Retrievals in the Troposphere and Lower Troposphere by the Use of the Tropopause-Based Ozone Profile Climatology

An advance algorithm based on the optimal estimation technique has beeen developed to derive ozone profile from GOME UV radiances and have adapted it to OMI UV radiances. OMI vertical resolution : 7-11 km in the troposphere and 10-14 km in the stratosphere. Satellite ultraviolet measurements (GOME, OMI) contain little vertical information for the small scale of ozone, especially in the upper troposphere (UT) and lower stratosphere (LS) where the sharp O3 gradient across the tropopause and large ozone variability are observed. Therefore, retrievals depend greatly on the a-priori knowledge in the UTLS

Bak, Juseon↗
NASA NTRS2016

Marli: Mars Lidar for Global Wind Profiles and Aerosol Profiles from Orbit

The Mars Exploration Analysis Group's Next Orbiter Science Analysis Group (NEXSAG) has recently identified atmospheric wind measurements as one of 5 top compelling science objectives for a future Mars orbiter. To date, only isolated lander observations of martian winds exist. Winds are the key variable to understand atmospheric transport and answer fundamental questions about the three primary cycles of the martian climate: CO2, H2O, and dust. However, the direct lack of observations and imprecise and indirect inferences from temperature observations leave many basic questions about the atmospheric circulation unanswered. In addition to addressing high priority science questions, direct wind observations from orbit would help validate 3D general circulation models (GCMs) while also providing key input to atmospheric reanalyses. The dust and CO2 cycles on Mars are partially coupled and their influences on the atmospheric circulation modify the global wind field. Dust absorbs solar infrared radiation and its variable spatial distribution forces changes in the atmospheric temperature and wind fields. Thus it is important to simultaneously measure the height-resolved wind and dust profiles. MARLI provides a unique capability to observe these variables continuously, day and night, from orbit.

Orbit↗