Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lattice geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Interleaved bond frustration in a triangular lattice antiferromagnet

Frustration of long-range order via lattice geometry amplifies fluctuations and generates ground states that are highly sensitive to perturbations. Traditionally, geometric frustration is used to engineer unconventional magnetic states; however, the charge degree of freedom and bond order can be similarly frustrated. Finding materials that host both frustrated magnetic and bond networks holds promise for engineering structural and magnetic states with the potential of coupling to one another via either magnetic or strain fields. Here we identify an unusual instance of this coexistence in the triangular lattice antiferromagnets LnCd 3 P 3 (Ln = lanthanides). These compounds feature two-dimensional planes of unique trigonal planar CdP 3 units with an underlying bond instability that is frustrated via emergent kagome ice correlations. This bond instability is interleaved in between layers of frustrated magnetic moments. Furthermore, our results establish LnCd 3 P 3 as a rare materials class in which frustrated magnetism is embedded within a dopable semiconductor with a frustrated bond order instability.

Gomez Alvarado, S. J. [University of California, S↗

Emergent Above-Gap Photoluminescence in Molecularly Engineered Hybrid Bilayer Crystals

Bilayer crystals, built by stacking two-dimensional (2D) covalent monolayers, give rise to coupled excitonic states whose properties are constrained by fixed lattice symmetry and orientation. Replacing one covalent monolayer with a 2D molecular crystal––held together by non-covalent forces––overcomes this limitation, as molecular functional groups afford tunable in-plane lattice geometry, intermolecular spacing, and interlayer coupling, providing a powerful knob for exciton engineering. Here, in this study, we report four-atom-thick hybrid bilayer crystals (HBCs) synthesized by directly growing single-crystalline PDI molecular crystal atop WS 2 monolayers, which exhibit a robust photoluminescence (PL) peak 120 meV above the WS 2 optical band gap alongside a belowgap emission. Both peaks display strong polarization anisotropy—nearing unity for the above-gap emission—and maintain a perfectly linear power-law dependence up to an excitation density of ~10 7 mW/cm 2 , indicative of coexisting localized and delocalized excitonic states. Substituting PDI with a PTCDA monolayer on WS 2 fully quenches PL, demonstrating molecular control over excitonic emission. Lattice scale ab initio GW and GW-BSE calculations reveal a significantly hybridized bilayer band structure in PDI/WS 2 that supports interlayer excitonic species both above and below the WS 2 gap with strong polarization anisotropy, in excellent agreement with experiment. Our work introduces a molecule-based bilayer platform for the bottom-up design and control of excitonic phenomena in atomically thin optoelectronic and quantum materials.

2D materials↗

Temperature-Dependent Structural Transition in Cu-Intercalated Trigonal CuYbSe 2

Rare-earth delafossites, ARCh 2 ; A = alkali metal, R = rare-earth, Ch = chalcogen which consist of intercalated rare-earth metal dichalcogenides, host frustrated triangular lattices that are fertile ground for exotic phenomena. In most cases, the triangular rare-earth sublattice arises from R-3m (No. 166) structures with three layers of rare-earth metal dichalcogenide octahedra or P6 3 /mmc (No. 194) structures with two such layers, analogous to those found in transition metal dichalcogenides. Substituting the alkali metal with Cu + yields a distinct trigonal crystal symmetry P-3m1 (No. 164) in these structures. This symmetry change alters the coordination environment from ASe 6 octahedra in R-3m AYbSe 2 to CuSe 4 tetrahedra in CuYbSe 2 , resulting in shortened rare-earth to rare-earth separations and significantly reduced interlayer distances. Using X-ray single-crystal diffraction, powder neutron diffraction, resistance, and specific heat measurements, a structural transition slightly below room temperature (258 K) is observed. The low-temperature structure is a lower-symmetry I2/m structure, accompanied by partial Cu-site vacancy ordering. The combination of Cu disorder and the triangular lattice geometry in CuYbSe 2 provides a promising platform for investigating frustrated magnetism and unconventional transport phenomena.

Chemical structure↗

Electron correlation and incipient flat bands in the Kagome superconductor CsCr 3 Sb 5

Correlated kagome materials exhibit a compelling interplay between lattice geometry, electron correlation, and topology. In particular, the flat bands near the Fermi level provide a fertile playground for novel many-body states. Here we investigate the electronic structure of CsCr 3 Sb 5 using high-resolution angle-resolved photoemission spectroscopy and ab-initio calculations. Our results suggest that Cr 3d electrons are intrinsically incoherent, showing strong electron correlation amplified by Hund’s coupling. Notably, we identify incipient flat bands close to the Fermi level, which are expected to significantly influence the electronic properties of the system. Across the density-wave-like transition at 55 K, we observe a drastic enhancement of the electron scattering rate, which aligns with the semiconducting-like property at high temperatures. These findings establish CsCr 3 Sb 5 as a strongly correlated Hund’s metal with incipient flat bands near the Fermi level, which provides an electronic basis for understanding its novel properties compared to the weakly correlated AV 3 Sb 5 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural constraint integration in a generative model for the discovery of quantum materials

Billions of organic molecules have been computationally generated, yet functional inorganic materials remain scarce due to limited data and structural complexity. Here, in this work, we introduce Structural Constraint Integration in a GENerative model (SCIGEN), a framework that enforces geometric constraints, such as honeycomb and kagome lattices, within diffusion-based generative models to discover stable quantum materials candidates. SCIGEN enables conditional sampling from the original distribution, preserving output validity while guiding structural motifs. This approach generates ten million inorganic compounds with Archimedean and Lieb lattices, over 10% of which pass multistage stability screening. High-throughput density functional theory calculations on 26,000 candidates shows over 95% convergence and 53% structural stability. A graph neural network classifier detects magnetic ordering in 41% of relaxed structures. Furthermore, we synthesize and characterize two predicted materials, TiPd 0.22 Bi 0.88 and Ti 0.5 Pd 1.5 Sb, which display paramagnetic and diamagnetic behaviour, respectively. Our results indicate that SCIGEN provides a scalable path for generating quantum materials guided by lattice geometry.

36 MATERIALS SCIENCE↗

Topological magnons on the ferromagnetic zigzag lattice

Motivated by the experimental identification of magnetic compounds consisting of zigzag chains, we analyze the band structure topology of magnons in ferromagnets on a zigzag lattice. We account for the general lattice geometry by including spatially anisotropic Heisenberg exchange interactions and by Dzyaloshinskii-Moriya interaction on inversion asymmetric bonds. Within the linear spin-wave theory, we find two magnon branches, whose band structure topology (i.e., Chern numbers) we map out in a comprehensive phase diagram. Notably, besides topologically trivial and gapless phases, we identify topologically nontrivial phases that support chiral edge magnons. We show that these edge states are robust against elastic defect scattering.

Subramanian, Skandan [ORNL] (ORCID:000900087255487↗

Performance and Achievable Rates of the Gottesman-Kitaev-Preskill Code for Pure-Loss and Amplification Channels

Quantum error-correction codes protect information from realistic noisy channels and lie at the heart of quantum computation and communication tasks. Understanding the optimal performance and other information-theoretic properties, such as the achievable rates, of a given code is crucial, as these factors determine the fundamental limits imposed by the encoding in conjunction with the noise channel. Here, we use the transpose channel to analytically obtain the near-optimal performance of any Gottesman-Kitaev-Preskill (GKP) code under pure loss and pure amplification. We present rigorous connections between GKP code’s near-optimal performance and its dual lattice geometry and average input energy. With no energy constraint, we show that when |𝜏/(1−𝜏)| is an integer, specific families of GKP codes simultaneously achieve the loss and amplification capacity. 𝜏 is the transmissivity (gain) for loss (amplification). Our results establish GKP code as the first structured bosonic code family that achieves the capacity of loss and amplification.

Zheng, Guo [Univ. of Chicago, IL (United States)] ↗

Topological magnons and topological electronic properties in metallic Kagome magnets

The primary goal of this project is to study metallic Kagome magnets that potentially host topological electronic properties and topological magnetic excitations, aiming to understand the effect of lattice geometry on topological character of magnons and electronic bands and to study the interplay between magnetism and topological electronic properties. Through this DOE-funded research program, we have unraveled novel electronic and thermoelectric properties of RMn 6 Sn 6 (R = Y, Tb, and Er) and Fe 3 Ge Kagome magnets, including anomalous Hall effect and anomalous Nernst effect, which are associated with the Berry curvature contribution from the massive Dirac gaps in the 3D momentum space. In addition, we have also revealed topological Hall effect and topological Nernst effect, and we ascribed these phenomena to the Berry curvature associated with the magnetic field-induced non-zero scalar spin chirality. These features highlight the synergic effects of the Berry phases in both momentum space and real space of Kagome magnets, which render them excellent candidates for room-temperature electronic and thermoelectric applications based on transverse transport. In addition, through this program we have also study novel thermal transport properties of quantum materials by probing the thermal Hall effect, which can provide crucial insights into nontrivial topological character and chirality of quasiparticles like magnons and magnon-polarons. This report provides an overview of some project activities related to these accomplishments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Instability of Nagaoka State and Quantum Phase Transition via Kinetic Frustration Control

We investigate the Nagaoka-Thouless (NT) ferromagnetic instability in the strongly interacting t-t' Hubbard model by continuously breaking particle-hole symmetry on a tunable square-triangular lattice geometry. We use an analytic approach to show that the fully spin-polarized state becomes unstable to a metastable spin-polaron when the kinetic frustration t'/t exceeds a critical, dimension-dependent value. Large-scale density matrix renormalization group (DMRG) simulations reveal a quantum phase transition from the NT ferromagnet to a spiral spin-density wave, which evolves continuously into the Haerter-Shastry antiferromagnet in the large-frustration limit. Remarkably, this transition remains robust at low but finite hole density, making it accessible in cold-atom and moiré Hubbard platforms under strong interactions. A variational analysis further captures the instability mechanism at finite density via frustration-induced magnon band deformation.

FOS: Physical sciences↗

A design concept for an MMIC microstrip phased array

A conceptual design for a microstrip phased array with monolithic microwave integrated circuit (MMIC) amplitude and phase controls is described. The MMIC devices used are 20 GHz variable power amplifiers and variable phase shifters recently developed by NASA contractors for applications in future Ka band advanced satellite communication antenna systems. The proposed design concept is for a general NxN element array of rectangular lattice geometry. Subarray excitation is incorporated in the MMIC phased array design to reduce the complexity of the beam forming network and the number of MMIC components required. The proposed design concept takes into consideration the RF characteristics and actual phyical dimensions of the MMIC devices. Also, solutions to spatial constraints and interconnections associated with currently available packaging designs are discussed. Finally, the design of the microstrip radiating elements and their radiation characteristics are examined.

Lee, R. Q.↗

A design concept for an MMIC (Monolithic Microwave Integrated Circuit) microstrip phased array

A conceptual design for a microstrip phased array with monolithic microwave integrated circuit (MMIC) amplitude and phase controls is described. The MMIC devices used are 20 GHz variable power amplifiers and variable phase shifters recently developed by NASA contractors for applications in future Ka proposed design, which concept is for a general NxN element array of rectangular lattice geometry. Subarray excitation is incorporated in the MMIC phased array design to reduce the complexity of the beam forming network and the number of MMIC components required.

Lee, Richard Q.↗

Vehicle antenna for the mobile satellite experiment

A low profile, low cost, printed circuit, electronically steered, right hand circularly polarized phase array antenna system has been developed for the Mobile Satellite Experiment (MSAT-X) Program. The success of this antenna is based upon the development of a crossed-slot element array and detailed trade-off analyses for both the phased array and pointing system design. The optimized system provides higher gain at low elevation angles (20 degrees above the horizon) and broader frequency coverage (approximately 8 1/2 percent bandwidth) than is possible with a patch array. Detailed analysis showed that optimum performance could be achieved with a 19 element array of a triangular lattice geometry of 3.9 inch element spacing. This configuration has the effect of minimizing grating lobes at large scan angles plus it improves the intersatellite isolation. The array has an aperture 20 inches in diameter and is 0.75 inch thick overall, exclusive of the RF and power connector. The pointing system employs a hybrid approach that operates with both an external rate sensor and an internal error signal as a means of fine tuning the beam acquisition and track. Steering the beam is done electronically via 18, 3-bit diode phase shifters. A nineteenth phase shifter is not required as the center element serves as a reference only. Measured patterns and gain show that the array meets the stipulated performance specifications everywhere except at some low elevation angles.

Peng, Sheng Y.↗

A Structural and Molecular Approach for the Study Biomarkers

Investigation of the nucleation and growth of crystals in both abiotic and biotic systems is critical to seemingly diverse disciplines of geology, biology, environmental science, and astrobiology. While there are abundant studies devoted to the determination of the structure and composition of inorganic crystals, as well as to the development of thermodynamic and kinetic models, it is only recently that research efforts have been directed towards understanding mineralization in biological systems (i.e., biomineralization). Biomineralization refers to the processes by which living organisms form inorganic solids. Studies of the processes of biomineralization under low temperature aqueous conditions have focused primarily on magnetite forming bacteria and shell forming marine organisms. Many of the biological building materials consist of inorganic minerals (calcium carbonate, calcium phosphate, silica or iron oxide) intricately combined with organic polymers (like proteins). More recently, efforts have been undertaken to explore the nature of biological activities in ancient rocks. In the absence of well-preserved microorganisms or genetic material required for the polmerase chain reaction (PCR) method in molecular phylogenetic studies, using biominerals as biomarkers offers an alternative approach for the recognition of biogenic activity in both terrestrial and extraterrestrial environments. The primary driving force in biomineralization is the interaction between organic and inorganic phases. Thus, the investigation of the ultrastructure and the nature of reactions at the molecular level occurring at the interface between inorganic and organic phases is essential to understanding the processes leading to the nucleation and growth of crystals. It is recognized that crystal surfaces can serve as the substrate for the organization of organic molecules that lead to the formation of polymers and other complex organic molecules, and in discussions of the origins of life, is referred to as organic synthesis on mineral surfaces. Furthermore, it is suggested that the interaction between mineral surfaces and simple organic molecules resulted in the formation of amino acids, RNA, and perhaps other more complex molecules such as proteins. On the other hand, in natural systems, it is recognized that functional groups on cell walls or membranes of microorganisms serve as sites of nucleation and crystallization. The precise replication of biominerals with controlled structure, morphology, size and texture is not confined to higher organisms as it also occurs in primitive prokaryotic cells such as magnetotactic bacteria and cyanobacteria. This suggests that the principal strategies of biomineralization were established early on in the evolutionary history of organisms. It is critical, therefore, to search for common mechanisms within diverse biological systems. One such common factor is the capability for organization and self-assembly. Organic macromolecules such as proteins and lipids can aggregate and polymerize forming membranes or extracellular matrix. At the organic-inorganic interface, several factors such as lattice geometry, polarity, stereochemistry and topography may act in concert to control nucleation and growth of crystals. Although several models have been proposed that discuss the significance of these factors for biomineralization, no comprehensive experimental data are available. In contrast to crystallization in exclusively inorganic systems, the kinetics of reaction and structural relationships between organic and inorganic phases in biominerals or biomimetic material is poorly understood. For example, it is not clear if the concept of epitactic growth (geometrical matching of unit cells at the interface of a secondary crystal growing on a primary crystal) applies to organic-inorganic systems. In contrast to inorganic templates that often have a smooth and rigid surface that promotes epitactic growth, biological substrates are usually rough and result in a large degree of mismatch. It is apparent that factors controlling the reaction at the crystal-matrix interface are strongly dependent upon the nature of the substrate. Therefore, characterization of the assembled organic surface and surface structure of the inorganic phase is crucial to understanding the processes of biomineralization. The focus of our research is the investigation of the processes leading to the nucleation and growth of crystals on both natural and synthetic systems through an interdisciplinary approach that integrates molecular biology, morphology and mineralogy using advanced preparation and analytical techniques. We have studied run-products, particularly magnetite, siderite and other carbonates, that resulted from extracellular biomineralization by extremophiles isolated from a variety of extreme environments ranging from permafrost to hydrothermal vent systems. The results of this study are critical to recognizing biomarkers in terrestrial and extraterrestrial environments.

Thomas-Keprta, Kathie↗

Geometry Systems for Lattice-Based Reconfigurable Space Structures

We describe analytical methods for the design of the discrete elements of ultralight lattice structures. This modular, building block strategy allows for relatively simple element manufacturing, as well as relatively simple robotic assembly of low mass density structures on orbit, with potential for disassembly and reassembly into highly varying and large structures. This method also results in a structure that is easily navigable by relatively small mobile robots. The geometry of the cell can allow for high packing efficiency to minimize wasted payload volume while maximizing structural performance and constructability. We describe the effect of geometry choices on the final system mechanical properties and automated robotic constructability of a final system. Geometric properties considered include number of attachments per voxel, number of attachments per coefficient of volume, and effects of vertex, edge, and face connectivity of the unit cell. Mechanical properties considered include strength scaling, modulus scaling, and packing efficiency of the lattice. Automated constructibility metrics include volume allowance for an end-effector, strut clearance angle for an end-effector, and packing efficiency. These metrics were applied to six lattice unit cell geometries: cube, cuboctahedron, octahedron, octet, rhombic dodecahedron, and truncated octahedron. A case study is presented to determine the most suitable lattice system for a specific set of strength and modulus scaling requirements while optimizing for ease of robotic assembly.

lattice geometry↗

Geometry Systems for Lattice-Based Reconfigurable Space Structures

We describe analytic methods for the design of the discrete elements of ultralight lattice structures. This modular building block strategy allows for relatively simple element manufacturing as well as relatively simple robotic assembly of low mass-density structures on orbit, with potential for disassembly and reassembly into highly varying and large structures. This method also results in a structure that is easily navigable by relatively small, mobile robots. The geometry of the cell can allow for high packing efficiency to minimize wasted payload volume while maximizing structural performance and constructability. We describe the effect of geometry choices on the mechanical properties and automated robotic constructability of a final system. Geometric properties considered include number of attachments per voxel, number of attachments per coefficient of volume, and effects of vertex, edge, and face connectivity of the unit cell. Mechanical properties considered include strength scaling, modulus scaling, and packing efficiency of the lattice. Automated constructibility metrics include volume allowance for an end-effector, strut clearance angle for an end-effector, and packing efficiency. These metrics were applied to six lattice unit cell geometries: cube, cuboctahedron, octahedron, octet, rhombic dodecahedron, and truncated octahedron. A case study is presented to determine the most suitable lattice system for a specific set of strength and modulus scaling requirements while optimizing for ease of robotic assembly.

digital materials↗

Superalloy Lattice Block Developed for Use in Lightweight, High-Temperature Structures

Successful development of advanced gas turbine engines for aircraft will require lightweight, high-temperature components. Currently titanium-aluminum- (TiAl) based alloys are envisioned for such applications because of their lower density (~4 g/cm3) in comparison to superalloys (~8.5 g/cm3), which have been utilized for hot turbine engine parts for over 50 years. However, a recently developed concept (lattice block) by JAMCORP, Inc., of Willmington, Massachusetts, would allow lightweight, high-temperature structures to be directly fabricated from superalloys and, thus, take advantage of their well-known, characterized properties. In its simplest state, lattice block is composed of thin ligaments arranged in a three dimensional triangulated trusslike configuration that forms a structurally rigid panel. Because lattice block can be fabricated by casting, correctly sized hardware is produced with little or no machining; thus very low cost manufacturing is possible. Together, the NASA Glenn Research Center and JAMCORP have extended their lattice block methodology for lower melting materials, such as Al alloys, to demonstrate that investment casting of superalloy lattice block is possible. This effort required advances in lattice block pattern design and assembly, higher temperature mold materials and mold fabrication technology, and foundry practice suitable for superalloys (ref. 1). Lattice block panels have been cast from two different Ni-base superalloys: IN 718, which is the most commonly utilized superalloy and retains its strength up to 650 C; and MAR M247, which possesses excellent mechanical properties to at least 1100 C. In addition to the open-cell lattice block geometry, same-sized lattice block panels containing a thin (~1-mm-thick) solid face on one side have also been cast from both superalloys. The elevated-temperature mechanical properties of the open cell and face-sheeted superalloy lattice block panels are currently being examined, and the microstructure is being characterized in terms of casting defects. In addition, a small study (ref. 3) is being undertaken with GE Aircraft Engines to determine the suitability of superalloy lattice block for engine components.

Hebsur, Mohan G.↗

User manual for BUNVIS-RG: An exact buckling and vibration program for lattice structures, with repetitive geometry and substructuring options

A computer program is described which is especially suited for making vibration and buckling calculations for prestressed lattice structures that might be used for space application. Structures having repetitive geometry are treated in a very efficient manner. Detailed instructions for data input are given along with several example problems illustrating the use and capability of the program.

Anderson, M. S.↗

A multi-element vortex lattice method for calculating the geometry and effects of a helicopter rotor wake in forward flight

A method is described for the analysis of the unsteady, incompressible potential flow associated with a helicopter rotor and it's wake in forward flight. This method is particularly useful in low advance ratio flight due to the major contribution, in the near field, of the deformed wake. The rotor geometry is prescribed and the unsteady wake geometry is computed from the local flow perturbation velocities. The wake is modeled as a full vortex lattice. The rotor geometry is arbitrary and several rotor blades can be represented. The unsteady airloads on the rotor blades are computed in the presence of the deformed rotor wake by a time-stepping technique. Solution for the load distribution on the blade surfaces is found by prescribing boundary conditions in a reference system which rotates with the blade tips. Transformation tensors are used to describe the contribution of the wake in the inertial system to the rotor in the rotating reference system. The effects of blade cyclic pitch variation are computed using a rotation tensor. The deformation of the wake is computed in the inertial frame. The wake is started impulsively from rest, allowing a natural convection of the wake with time.

Berry, John D.↗