Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrical switches”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

An electrical switching device controlled by a magnetic field-dependent impact ionization process

An abrupt change of conductance at a threshold magnetic field was observed in a device consisting of a nonmagnetic narrow-gap semiconductor. The conductance varies more than 25 times as the magnetic field increases. The threshold magnetic field can be tuned using a bias voltage from zero to several hundred Gauss. This large magnetoconductance effect is caused by the magnetic field-dependent impact ionization process. A theoretical model is proposed, and calculations based on this model simulate the experimental results closely. This device may be a good candidate for an electrical switching device controlled by a magnetic field.

99 GENERAL AND MISCELLANEOUS↗

Semiconductor–Metal Phase Transition and “Tristable” Electrical Switching in Nanocrystalline Vanadium Oxide Films on Silicon

Temperature dependences of the ac conductivity of nanocrystalline mixed vanadium oxide films on silicon revealed a multistep shape of the hysteresis loop observed during the semiconductor–metal phase transition in VO{sub 2}, which was not manifested in the case of dc measurements. These peculiarities are related to the size effect, heterophase character of vanadium oxide films, and different types of charge carriers in the bulk of nanocrystallites and on their surfaces. The appearance of steps is explained by the phase transition taking place in separate groups of crystallites with close dimensions. The phenomenon of “tristable” electrical switching in these vanadium oxide films was observed for the first time.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Non-volatile, solid state bistable electrical switch

A bistable switching element is made of a material whose electrical resistance reversibly decreases in response to intercalation by positive ions. Flow of positive ions between the bistable switching element and a positive ion source is controlled by means of an electrical potential applied across a thermal switching element. The material of the thermal switching element generates heat in response to electrical current flow therethrough, which in turn causes the material to undergo a thermal phase transition from a high electrical resistance state to a low electrical resistance state as the temperature increases above a predetermined value. Application of the electrical potential in one direction renders the thermal switching element conductive to pass electron current out of the ion source. This causes positive ions to flow from the source into the bistable switching element and intercalate the same to produce a non-volatile, low resistance logic state. Application of the electrical potential in the opposite direction causes reverse current flow which de-intercalates the bistable logic switching element and produces a high resistance logic state.

Williams, Roger M.↗

Bistable fluidic valve is electrically switched

Bistable control valve is selectively switched by direct application of an electrical field to divert fluid from one output channel to another. Valve is inexpensive, has no moving parts, and operates on fluids which are relatively poor electrical conductors.

Fiet, O.↗

Magnetic phase transitions and electrical switching in Gd5(Sn0.3Ge3.7) induced by magnetic field

Temperature and magnetic field dependences of the magnetization and electrical resistivity of zero-field-cooled (ZFC) Gd 5 (Sn 0.3 Ge 3.7 ) with a distinctly layered crystal structure have been studied. The unit cell of Gd 5 Ge 4 -based compounds is formed by 2D-like fragments, so-called slabs. Between 4.2 and 17 K, ZFC Gd 5 (Sn 0.3 Ge 3.7 ) shows an antiferromagnetic state [AFM(I)], which can be irreversibly transformed by a magnetic field to the ferromagnetic (FM) state. The critical magnetic field required for the irreversible AFM(I)-FM transition in Gd 5 (Sn 0.3 Ge 3.7 ) at 4.2 K is 38 kOe, which is 2-fold larger than observed in Gd 5 Ge 4 , 19 kOe. Additionally, ZFC Gd 5 Sn 0.3 Ge 3.7 ) above ˜30K shows another antiferromagnetic state [AFM(II)], which can be reversibly transformed by a magnetic field to the FM state. The difference between FM(I) and AFM(II) states (phases) in Gd 5 (Sn 0.3 Ge 3.7 ) can be attributed to the orientation of Gd magnetic moments, i.e., their orientation perpendicular or parallel to the slabs. In the temperature range of 17 K≤T≤30 K, both AFM(I) and FM(II) states (phases) may coexist in the alloy and can be irreversibly or reversibly transformed to the FM state. Magnetic phase transitions in Gd 5 (Sn 0.3 Ge 3.7 ) are accompanied with reversible or irreversible switching between the low- [AFM(I) and AFM(II)] and high-resistivity (FM) states.

Electrical switching↗

Electrical switching in cadmium boracite single crystals

Cadmium boracite single crystals at high temperatures ( 300 C) were found to exhibit a reversible electric field-induced transition between a highly insulative and a conductive state. The switching threshold is smaller than a few volts for an electrode spacing of a few tenth of a millimeter corresponding to an electric field of 100 to 1000 V/cm. This is much smaller than the dielectric break-down field for an insulator such as boracite. The insulative state reappears after voltage removal. A pulse technique revealed two different types of switching. Unstable switching occurs when the pulse voltage slightly exceeds the switching threshold and is characterized by a pre-switching delay and also a residual current after voltage pulse removal. A stable type of switching occurs when the voltage becomes sufficiently high. Possible device applications of this switching phenomenon are discussed.

Takahashi, T.↗

Direct imaging of electrical switching of antiferromagnetic Néel order in α-Fe 2 O 3 epitaxial films

In this work, we report the direct observation of switching of the Néel vector of antiferromagnetic (AFM) domains in response to electrical pulses in micron-scale Pt/α-Fe 2 O 3 Hall bars using photoemission electron microscopy. Current pulses lead to reversible and repeatable switching with the current direction determining the final state, consistent with Hall effect experiments that probe only the spatially averaged response. Current pulses also produce irreversible changes in domain structure, in and even outside the current path. In both cases only a fraction of the domains switch in response to pulses. Furthermore, the analysis of images taken with different x-ray polarizations shows that the AFM Néel order has an out-of-plane component in equilibrium that is important to consider in analyzing the switching data. These results show that—in addition to effects associated with spin-orbit torques from the Pt layer, which can produce reversible switching—changes in AFM order can be induced by purely thermal effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical Switching of Nematic Plasmonic Nanocolloids for Infrared Solar Gain Control

Controlling solar gain is essential to reduce the energy consumption by residential and commercial buildings, which are responsible for ≈40% of all energy generated globally. However, the dynamic control of solar gain in the near-infrared that corresponds to ≈50% of the overall Sun's energy at the Earth's surface, separately from the visible spectral range has been a challenge, albeit commercial coatings provide passive control while retaining highly visible transmission. To address this problem, in this paper switchable silver colloids (SSCs) are demonstrated, colloidal analogs of the common silver coatings used for solar gain control. When dispersed in a nematic liquid crystal, orientations of such plasmonic silver nanoplates are controlled by ≈1 V low-voltage electric fields, allowing for sub-second switching of the near-infrared-based solar gain. Installed and retrofit products made from thin films of such nanoplate dispersions confined between glass and plastic substrates, respectively, exhibit electrically controlled infrared-based solar gain while retaining high visible-range transparency, low haze, and high color rendering index. Furthermore, this study's findings reveal a great potential of soft-matter systems in addressing energy-related problems.

36 MATERIALS SCIENCE↗

Specification, Measurement, and Control of Electrical Switching Transients

There have been several instances of susceptibility to switching transients. The Space Shuttle Spacelab Remote Acquisition Unit (RAU-A standard interface between Spacelab payloads and the Shuttle communications system) will shut down if the input 28 Vdc bus drops below 22 volts for more than 80 gs. Although a MIL-STD-461 derivative CS06 requirement was levied on the RAU, it failed to find this susceptibility. A heavy payload on one aircraft sags the 28 volt bus below 20 volts for milliseconds. Dc-dc converters have an operating voltage. A typical 28 Vdc-to-5 Vdc converter operates within tolerance when input potential is between 17-40 Vdc, A hold-up capacitor can be used to extend the time this range is presented to the convener when the line potential sags or surges outside this range. The designer must know the range of normal transients in order to choose the correct value of hold-up. This report describes the phenomena of electrical power bus transients induced by the switching of loads both on and off the bus, and control thereof.

Javor, K.↗

Electrical switching of the magnetic vortex circulation in artificial multiferroic structure of Co/Cu/PMN-PT(011)

For this research, Co films and micron sized disks were grown on top of piezoelectric PMN-PT(011) and Cu/PMN-PT(001) substrates and investigated by the Magneto-Optic Kerr Effect and Photoemission Electron Microscopy. By applying an electric field in the surface normal direction, we find that the strain of the ferroelectric PMN-PT(011) substrate induces an in-plane uniaxial magnetic anisotropy in the Co overlayer. Under specific conditions, the Co magnetic vortex could be switched between clockwise and counter-clockwise circulations. The variations of the Co vortex switching were attributed to the variations of the ferroelectric domains under the Co disks. Lastly, we speculate that the switching of the magnetic vortex circulation is a dynamical process which may involve pulses of appropriate magnitude and duration of the uniaxial magnetic anisotropy delivered to the magnetic vortex.

36 MATERIALS SCIENCE↗

Thermodynamic, Raman and electrical switching studies on Si{sub 15}Te{sub 85-x}Ag{sub x} (4 {<=} x {<=} 20) glasses

We have investigated thermal properties of bulk Si{sub 15}Te{sub 85-x}Ag{sub x} (4 {<=} x {<=} 20) glasses in detail, through alternating differential scanning calorimetry experiments. The composition dependence of thermal parameters reveal the signatures of rigidity percolation and chemical threshold at compositions x = 12 and x = 19, respectively. The stability and glass forming ability of these glasses have also been determined using the data obtained from different thermodynamic quantities and it is found that the Si{sub 15}Te{sub 85-x}Ag{sub x} glasses in the region 12 {<=} x {<=} 17 are more stable when compared to other glasses of the same series. Further, the blueshift observed in Raman spectroscopy investigations, in the composition range 12 {<=} x {<=} 13, support the occurrence of stiffness threshold in this composition range. All Si{sub 15}Te{sub 85-x}Ag{sub x} (4 {<=} x {<=} 20) glasses are found to exhibit memory type switching (for sample thickness 0.25 mm) in the input current range 3-9 mA. The effect of rigidity percolation and chemical thresholds on switching voltages are observed at x = 12 and 19, respectively.

36 MATERIALS SCIENCE↗

Electric Switching of Fluorescence Decay in Gold–Silica–Dye Nematic Nanocolloids Mediated by Surface Plasmons

Tunable composite materials with interesting physical behavior can be designed through integrating unique optical properties of solid nanostructures with facile responses of soft matter to weak external stimuli, but this approach remains challenged by their poorly controlled coassembly at the mesoscale. Using scalable wet chemical synthesis procedures, we fabricated anisotropic gold–silica-dye colloidal nanostructures and then organized them into the device-scale (demonstrated for square-inch cells) electrically tunable composites by simultaneously invoking molecular and colloidal self-assembly. We show that the ensuing ordered colloidal dispersions of shape-anisotropic nanostructures exhibit tunable fluorescence decay rates and intensity. Here in this paper, we characterize how these properties depend on low-voltage fields and polarization of both the excitation and emission light, demonstrating a great potential for the practical realization of an interesting breed of nanostructured composite materials.

42 ENGINEERING↗

Electrical switching of a p-wave magnet

Magnetic states with zero magnetization but non-relativistic spin splitting are outstanding candidates for the next generation of spintronic devices. Their electronvolt (eV)-scale spin splitting, ultrafast spin dynamics and nearly vanishing stray fields make them particularly promising for several applications. A variety of such magnetic states with non-trivial spin textures have been identified recently, including even-parity d-wave, g-wave or i-wave altermagnets and odd-parity p-wave magnets. Achieving voltage-based control of the non-uniform spin polarization of these magnetic states is of great interest for realizing energy-efficient and compact devices for information storage and processing. Spin-spiral type II multiferroics are optimal candidates for such voltage-based control, as they exhibit an inversion-symmetry-breaking magnetic order that directly induces ferroelectric polarization, allowing for symmetry-protected cross-control between spin chirality and polar order. Here we combine photocurrent measurements, first-principles calculations and group-theory analysis to provide direct evidence that the spin polarization of the spin-spiral type II multiferroic NiI 2 exhibits odd-parity character connected to the spiral chirality. The symmetry-protected coupling between chirality and polar order enables electrical control of a primarily non-relativistic spin polarization. Our findings represent an observation of p-wave magnetism in a spin-spiral type II multiferroic, which may lead to the development of voltage-based switching of non-relativistic spin polarization in compensated magnets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrical switching in a magnetically intercalated transition metal dichalcogenide

Advances in controlling the correlated behaviour of transition metal dichalcogenides have opened a new frontier of many-body physics in two dimensions. A field where these materials have yet to make a deep impact is antiferromagnetic spintronics-a relatively new research direction promising technologies with fast switching times, insensitivity to magnetic perturbations and reduced cross-talk. Here, we present measurements on the intercalated transition metal dichalcogenide Fe 1/3 NbS 2 that exhibits antiferromagnetic ordering below 42 K. We find that remarkably low current densities of the order of 10 4 A cm -2 can reorient the magnetic order, which can be detected through changes in the sample resistance, demonstrating its use as an electronically accessible antiferromagnetic switch. Finally, Fe 1/3 NbS 2 is part of a larger family of magnetically intercalated transition metal dichalcogenides, some of which may exhibit switching at room temperature, forming a platform from which to build tuneable antiferromagnetic spintronic devices.

36 MATERIALS SCIENCE↗