Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrical switches”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Enhanced capacity and stability for the separation of cesium in electrically switched ion exchange

Electrically switched ion exchange (ESIX) can be used to separate ionic contaminants from industrial wastewater, including that generated by the nuclear industry. The ESIX method involves sequential application of reduction and oxidation potentials to an ion exchange film to induce the respective loading and unloading of cesium. This technology is superior to conventional methods (e.g electrodialysis reversal or reverse osmosis) as it requires very little energy for ionic separation. In previous studies, ESIX films have demonstrated relatively low ion exchange capacities and limited film stabilities over repeated potential applications. In this study, the methodology for the deposition of electro-active films (nickel hexacyanoferrate) on nickel electrodes was modified to improve the ion exchange capacity for cesium removal using ESIX. Cyclic voltammetry was used to investigate the ion exchange capacity and stability. Scanning electron microscopy (SEM) was used to characterize the modified film surfaces. Additionally, the films were examined for the separation of cesium ions. This modified film preparation technique enhanced the ion exchange capacity and improves the film stability compared to previous methods for the deposition of ESIX films. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Electrical switching device Patent

Electrical switching device comprising conductive liquid confined within square loop of deformable nonconductive tubing also used for leveling

Edman, C. W.↗

Electrical Switching and Imaging of Antiferromagnetic Spins in Perovskite Epitaxial Thin Films

Electrical control of antiferromagnets is essential for the field of antiferromagnetic spintronics that promises ultrafast speed and terahertz dynamics. However, the large family of complex oxide antiferromagnets such as perovskites have been largely unexplored. Here, we demonstrate electrical switching and detection of Néel vector in LaFeO 3 epitaxial thin films with an epitaxy-enabled biaxial anisotropy, of which the switching behavior is understood by comparing to magnetic field controlled spin Hall magnetoresistance measurements. The electrical switching is corroborated by imaging of antiferromagnetic domains using X-ray Magnetic Linear Dichroism Photoemission Electron Microscopy. Electrical switching of 3-nm and 10-nm LaFeO 3 films was achieved over a wide temperature range of 25 to 300 K. This work offers an attractive platform for exploration of antiferromagnetic spintronics and other emerging phenomena such as potential insulating altermagnetism.

36 MATERIALS SCIENCE↗

Unveiling the nature of Ga-based chalcogenides for electrical switching selectors

Three-dimensional phase-change memory with stackable crossbar architecture is a promising technology to meet the urgent demands for high-density storage and rapid information processing in the era of explosive data growth. The performance depends strongly on the properties of ovonic threshold switching (OTS) selectors, which control the on/off states of memory units. Amorphous GaS serves as an outstanding OTS material, distinguished by its sizable mobility gap and high crystallization temperature, while the underlying mechanism continues to be inadequately comprehended. Here, in this work, we systematically studied the structural and electronic properties of amorphous Ga-X (X = S/Se/Te) using first-principles calculations. The results show that Ga atoms adopt tetrahedral motifs, while S/Se/Te atoms predominantly exhibit the structure of a distorted triangular pyramid. This structural arrangement is ascribed to the substantial dative bonds formed by the lone-pair electrons of the anions and the vacant sp3 orbitals around Ga atoms. Large mobility gaps (e.g., GaS: 2.43 eV, GaSe: 1.76 eV, GaTe: 1.26 eV) and distinct mid-gap states (e.g., ∼0.66 eV above valence band tail) ensure that these three chalcogenide glasses can be switched on under an external electric field while effectively suppressing leakage current without a bias, and the defect electronic states originate from short, robust Ga-Ga bonds due to the formation of distorted chain-like local structures. Our research elucidates the mechanisms of amorphous Ga-X as OTS materials, enriching the spectrum of electrical switching selectors by incorporating III-VI chalcogenides. This inclusion offers novel opportunities for the refinement and optimization of high-density integrated memory systems.

36 MATERIALS SCIENCE↗

Electrically Switched Ion Exchange Based on Carbon-Polypyrrole Composite Smart Materials for the Removal of ReO 4 – from Aqueous Solutions

A simple and rapid process of TcO4- (or ReO4-) separation from aqueous solutions based on electrically switched ion exchange (ESIX) method was presented in this study. Polypyrrole (PPy) functionalized activated carbon (AC) was served as an excellent electrically switched ion exchanger for ions removal. Physico- and electro-chemical characteristics show AC-PPy composite exhibited an excellent capacity for ReO4 - removal and high stability during 50 times potential cycling. Chronoamperometric studies show that the treatment of ESIX could be completed within 60 s, which sharply shorten the time of uptake and release of ions. X-ray photoelectron spectroscopy (XPS) confirmed the process of ReO4- removal in AC-PPy composite. The present work provides a promising method for radioactive anion removal in water treatment.

electrically switched ion exchange, activated carb↗

Two Electrical Switching Phenomena In A Silver-Filled Epoxy

Two distinct electrical switching phenomena observed in experiments on commercial silver-filled epoxy: Depending on geometry of epoxy layer or strip and of metal electrical contacts, either transition from "off" (high-resistance) state at low applied electric field to "on" (low-resistance) state at high applied electric field; or transition from "on" (low resistance) at low applied electric field to "off" (high resistance) at high applied electric field. Improved understanding of phenomena leads to design of new and improved surge arrestors.

Javadi, Hamid↗

Tailoring Mid–Gap States of Chalcogenide Glass by Pressure–Induced Hypervalent Bonding Towards the Design of Electrical Switching Materials

Phase change memory (PCM) and ovonic threshold switching (OTS) materials using chalcogenide glass are essential elements in advanced 3D memory chips. The mid–gap states, induced by the disorder and defects in the glass, are the physical mechanisms of the electrical switching behavior, while the origin of these trap states is still under debate and the medium–range clusters that break the global octet rule, such as over–coordinated atoms, are known to be responsible in various glass. Here, it is discovered that a large fraction of over–coordinated clusters fails to generate mid–gap states, which are probably caused by hypervalent bonding, a multi–centered covalent bond participated by delocalized lone–pair electrons. This is confirmed by the pressure–driven simulations of amorphous GeSe models, in which it is found that octahedral motifs and hypervalent bonds prevent the over–coordinated medium–range clusters from providing excessive electrons. In practical applications, compatible dopants can be used to change the number of hypervalent bonds, thus controlling the number of mid–gap states and consequently the performance of PCM and OTS materials. Finally, these results reveal the origin of mid–gap states in chalcogenide glasses, enabling extensive control in the development of pioneering electrical switching materials.

36 MATERIALS SCIENCE↗

Scenarios for Deep Carbon Emission Reductions from Electricity by 2050 in Western North America using the Switch Electric Power Sector Planning Model: California's Carbon Challenge Phase II, Volume II

This study used a state-of-the-art planning model called SWITCH for the electric power system to investigate the evolution of the power systems of California and western North America from present-day to 2050 in the context of deep decarbonization of the economy. Researchers concluded that drastic power system carbon emission reductions were feasible by 2050 under a wide range of possible futures. The average cost of power in 2050 would range between $149 to $232 per megawatt hour across scenarios, a 21 to 88 percent increase relative to a business-as-usual scenario, and a 38 to 115 percent increase relative to the present-day cost of power. The power system would need to undergo sweeping change to rapidly decarbonize. Between present-day and 2030 the evolution of the Western Electricity Coordinating Council power system was dominated by implementing aggressive energy efficiency measures, installing renewable energy and gas-fired generation facilities and retiring coal-fired generation. Deploying wind, solar and geothermal power in the 2040 timeframe reduced power system emissions by displacing gas-fired generation. This trend continued for wind and solar in the 2050 timeframe but was accompanied by large amounts of new storage and long-distance high-voltage transmission capacity. Electricity storage was used primarily to move solar energy from the daytime into the night to charge electric vehicles and meet demand from electrified heating. Transmission capacity over the California border increased by 40 - 220 percent by 2050, implying that transmission siting, permitting, and regional cooperation will become increasingly important. California remained a net electricity importer in all scenarios investigated. Wind and solar power were key elements in power system decarbonization in 2050 if no new nuclear capacity was built. The amount of installed gas capacity remained relatively constant between present-day and 2050, although carbon capture and sequestration was installed on some gas plants by 2050.

14 SOLAR ENERGY↗

Electrical Switching of Perovskite Thin-Film Resistors

Electronic devices that exploit electrical switching of physical properties of thin films of perovskite materials (especially colossal magnetoresistive materials) have been invented. Unlike some related prior devices, these devices function at room temperature and do not depend on externally applied magnetic fields. Devices of this type can be designed to function as sensors (exhibiting varying electrical resistance in response to varying temperature, magnetic field, electric field, and/or mechanical pressure) and as elements of electronic memories. The underlying principle is that the application of one or more short electrical pulse(s) can induce a reversible, irreversible, or partly reversible change in the electrical, thermal, mechanical, and magnetic properties of a thin perovskite film. The energy in the pulse must be large enough to induce the desired change but not so large as to destroy the film. Depending on the requirements of a specific application, the pulse(s) can have any of a large variety of waveforms (e.g., square, triangular, or sine) and be of positive, negative, or alternating polarity. In some applications, it could be necessary to use multiple pulses to induce successive incremental physical changes. In one class of applications, electrical pulses of suitable shapes, sizes, and polarities are applied to vary the detection sensitivities of sensors. Another class of applications arises in electronic circuits in which certain resistance values are required to be variable: Incorporating the affected resistors into devices of the present type makes it possible to control their resistances electrically over wide ranges, and the lifetimes of electrically variable resistors exceed those of conventional mechanically variable resistors. Another and potentially the most important class of applications is that of resistance-based nonvolatile-memory devices, such as a resistance random access memory (RRAM) described in the immediately following article, Electrically Variable Resistive Memory Devices (MFS-32511-1).

Liu, Shangqing↗

Thermodynamic, kinetic and electrical switching studies on Si{sub 15}Te{sub 85-x}In{sub x} glasses: Observation of Boolchand intermediate phase

An interesting topic for quite some time is an intermediate phase observed in chalcogenide glasses, which is related to network connectivity and rigidity. This phenomenon is exhibited by Si-Te-In glasses also. It has been addressed here by carrying out detailed thermal investigations by using Alternating Differential Scanning Calorimetry technique. An effort has also been made to determine the stability of these glasses using the data obtained from different thermodynamic quantities and crystallization kinetics of these glasses. Electrical switching behavior by recording I-V characteristics and variation of switching voltages with indium composition have been studied in these glasses for phase change memory applications. - Graphical abstract: The variation of non-reversing heat flow ({Delta}H{sub NR}) of Si{sub 15}Te{sub 85-x}In{sub x} glasses with composition (x) and average coordination number (Left-Pointing-Angle-Bracket r Right-Pointing-Angle-Bracket). The Boolchand intermediate phase can be seen in the composition range 2{<=}x{<=}6. Highlights: Black-Right-Pointing-Pointer Observation of Boolchand intermediate phase. Black-Right-Pointing-Pointer Crystallization kinetic studies. Black-Right-Pointing-Pointer Electrical switching studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical switching in a Fe-thiacrown molecular device

First-principles calculations are performed to inspect the electronic and transport properties of a Fe-thiacrown molecular device, namely, a Au-Fe(9S{sub 3}){sub 2}-Au junction. It is found that the junction has a low-spin (LS) ground state and a high-spin (HS) metastable state. Further study shows that the HS state is a conducting state while the LS state is a nearly insulating one, which means that a switch between these two spin configurations results in a good electrical switching behavior and can serve as an ON/OFF state for a logic unit. Thus, it may find applications as switches or memories in molecular electronic circuits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanomaterials-Enhanced Electrically Switched Ion Exchange Process for Water Treatment

The objective of our work is to develop an electrically switched ion exchange (ESIX) system based on conducting polymer/carbon nanotube (CNT) nanocomposites as a new and cost-effective approach for removal of radioactive cesium, chromate, and perchlorate from contaminated groundwater. The ESIX technology combines ion exchange and electrochemistry to provide a selective, reversible method for the removal of target species from wastewater. In this technique, an electroactive ion exchange layer is deposited on a conducting substrate, and ion uptake and elution are controlled directly by modulation of the potential of the layer. ESIX offers the advantages of highly-efficient use of electrical energy combined with no secondary waste generation. Recently, we have improved upon the ESIX process by modifying the conducting substrate with carbon nanotubes prior to the deposition of the electroactive ion exchanger. The nanomaterial-based electroactive ion exchange technology will remove cesium-137, chromate, and perchlorate rapidly from wastewater. The high porosity and high surface area of the electroactive ion exchange nanocomposites results in high loading capacity and minimize interferences for non-target species. Since the ion adsorption/desorption is controlled electrically without generating a secondary waste, this electrically active ion exchange process is a green process technology that will greatly reduce operating costs.

54 ENVIRONMENTAL SCIENCES↗

Absence of Evidence of Electrical Switching of the Antiferromagnetic Néel Vector

Much theoretical and experimental concern has been focused on the electrical switching of the antiferromagnetic (AFM) Néel vector via spin-orbit torque. Measurements employing multiterminal patterned structures of Pt=AFM show recurring signals of the supposedly planar Hall effect and magnetoresistance, implying AFM switching. We show in this Letter that similar signals have been observed in structures with and without the AFM layer, and of an even larger magnitude using different metals and substrates. These may not be the conclusive evidence of spin-orbit torque switching of AFM, but the thermal artifacts of patterned metal structure on substrate. Furthermore, large current densities in the metallic devices, beyond the Ohmic regime, can generate unintended anisotropic thermal gradients and voltages. AFM switching requires unequivocal detection of the AFM N´eel vector before and after SOT switching.

36 MATERIALS SCIENCE↗

Perfect electrical switching of edge channel transport in HgTe quantum wells controlled by gate voltage

We present a proposal to realize a perfect electrical switching of topological edge-state transport in a HgTe quantum well (QW). In our device design, we place a strip-like top gate voltage in a conventional quantum-point-contact (QPC) region in the HgTe QW. The numerical calculations show that upon increasing the gate voltage, two new conductance channels are developed in the transport direction and just neighbouring the boundaries of the top gate. The quantum states in the new channels can couple with the edge states to open a gap in energy spectrum, and in turn the gap width can be adjusted by the gate voltage, indicating that switch-on/off of the edge channels can be manipulated in a controllable way. Our device can not only be considered as a development of the conventional QPC structure based on the HgTe QW but also provides a new route to realize topological electrical switchers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Liquid Crystalline Order and Electric Switching of Upconversion Luminescence in Colloidal Nanorod Suspensions

The polarization-dependent photon upconversion luminescence properties of large-scale orientationally ordered soft matter systems formed by colloidal nanorods dispersed in an isotropic solvent are studied. The electrostatically charged photon-upconverting nanorods form an isotropic dispersion at low concentrations, whereas orientational order and a nematic phase emerge at high concentrations. When an alternating electric field is applied, particles align in the direction of the electric field in both nematic and isotropic phases, though the nature of this electric switching is different in these two phases. Owing to the long-range orientational order in the nematic phase, the upconversion luminescence from the particles is polarized without an external field. Polarization dependence of these properties can also be electrically induced in an isotropic phase of the colloidal nanorods. Further, the dynamics of switching of photon upconversion luminescence in both nematic and isotropic dispersions are explored and their potential technological uses are discussed.

36 MATERIALS SCIENCE↗

Graphene-Polypyrrole Nanocomposite as a Highly Efficient and Low Cost Electrically Switched Ion Exchanger for Removing ClO4- from Wastewater

Perchlorate (ClO4-) contamination is now recognized as a widespread concern affecting many water utilities. In this report, graphene is employed as the scaffold to synthesize novel graphene-polypyrrole nanocomposite, which is demonstrated as excellent electrically switched ion exchanger for perchlorate removal. Scanning electron microscopy (SEM) and electrochemical measurements showed that the 3D nanostructured graphene/Ppy nanocomposite exhibited the significantly improved uptake capacity for ClO4- compared with Ppy film. X-ray photoelectron spectroscopy (XPS) confirmed the uptake and release process of ClO4- in graphene/Ppy nanocomposite. In addition, the presence of graphene substrate resulted in high stability of graphene/Ppy nanocomposite during potential cycling. The present work provides a promising method for large scale water treatment.

36 MATERIALS SCIENCE↗

Topological Nanocolloids with Facile Electric Switching of Plasmonic Properties

Combining topology and plasmonics paradigms in nanocolloidal systems may enable new means of pre-engineering desired composite material properties. Here we design and realize orientationally ordered assemblies of noble metal nanoparticles with genus-one topology and unusual long-range ordering mediated by their interactions with the surrounding nematic fluid host. Facile electric switching of these composites is reminiscent of that of pristine liquid crystals (LCs), but provides a means of reconfiguring the nanoparticle assembly and thus also the ensuing composite medium's optical properties. Our findings may lead to formation of new molecular-colloidal soft matter phases with unusual optical properties, as well as optical metamaterials.

14 SOLAR ENERGY↗

Electrical switching effect of a single-unit-cell CrO{sub 2} layer on rutile TiO{sub 2} surface

Rutile CrO{sub 2} is the most important half-metallic material with nearly 100% spin polarization at the Fermi level, and rutile TiO{sub 2} is a wide-gap semiconductor with many applications. Here, we show through first-principles investigation that a single-unit-cell CrO{sub 2} layer on rutile TiO{sub 2} (001) surface is ferromagnetic and semiconductive with a gap of 0.54 eV, and its electronic state transits abruptly to a typical metallic state when an electrical field is applied. Consequently, this makes an interesting electrical switching effect which may be useful in designing spintronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗