Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WPC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

30 records · Page 2

Coupled management of electric vehicle workplace charging and office building loads

Significant building energy savings are realized through heating, ventilation, and air conditioning (HVAC) setpoint adjustment and daylighting control. Workplace charging (WPC) enables colocation of electric vehicles (EVs) with office building loads. We proposed managing energy use of workplace EV charging and the office building and determined the number of EVs that building energy savings can facilitate charging. We simulated building energy savings in typical medium offices in Chicago IL, Baltimore MD, and Houston TX, spanning three US climate regions. Considering the EV hosting capacity of the saved building energy and travel patterns of roundtrip commuting, we minimized EV charging costs under time-of-use electricity pricing. Managed WPC can reduce charging electricity bills compared to first-come, first-served charging. The ratio of EVs to chargers, the coincident period of commuters’ dwell time and lower electricity prices, and the number of EVs in the office impacted the economic benefits achieved through charging management.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Coal-Filler-Based Thermoplastic Composites as Construction Materials: A New Sustainable End-Use Application

This paper investigates coal’s viability as an alternative filler to wood flour in Wood Plastic Composites (WPCs) – a class of materials used in building applications in lieu of pressure-treated wood. Coal Plastic Composites (CPCs) were fabricat-ed with 15 – 60 wt.% coal combined with high density polyethylene and their physical (mechanical, water absorption and metal leaching) and chemical (oxidative degradation and flammability) properties were compared with commercial WPCs. In addition, mass and energy balances (10 tonne/hr basis) and life cycle analyses (60 wt.% filler and 1 tonne ba-sis) were conducted on CPCs and WPCs to assess environmental impact during manufacturing. At 60 wt.%, CPCs had a higher flexural strength, slower oxidative degradation and burn rate, and lower water absorption in comparison to com-mercial WPCs, suggesting better performance and stability in building applications. Furthermore, CPC manufacturing showed 44% lower greenhouse gas emissions and 62% less energy usage in comparison with WPC. These results indi-cate that direct utilization of coal as a filler in construction composite applications may yield lower cost products with lower associated emissions and energy demand compared to existing WPC materials, potentially yielding a more sustain-able end-use for coal than current uses such as power production.

Coal Plastic Composites, Wood Plastic Composites, ↗

Performance Analysis: Issues Tracking System Data through June 2013

This report presents the results from an analysis of issues and assessments in LLNL’s Issues Tracking System (ITS). The analysis is conducted to identify issues that may require additional management attention and noncompliances that may not have been previously identified that meet the threshold for reporting to the DOE Noncompliance Tracking System (NTS) or to the DOE Safeguards and Security Information Management System (SSIMS). This report includes ITS data within the DOE Office of Enforcement regulated subjects through June 2013. The analysis in this report primarily focuses on deficiencies identified in the last twelve months. The analysis of issues concluded that data for 17 of the 25 Office of Enforcement regulated safety/security subjects were within expected variation. The data for eight met a common test and were discussed further. Three of the eight safety subjects met an action limit and were analyzed to resolution. Analysis of data from one of the safety subjects where a common test was met identified a potential safety related significant or programmatic (systemic) noncompliance with the LLNL work planning and control process. Additional analysis is needed to make a final determination. Note: Since the analysis of WPC deficiencies (through June 2013) was completed, a noncompliance evaluation was also completed in November 2013 and included more recent WPC deficiencies. The analysis of ITS data through June 2013, and the results of the noncompliance evaluation completed in November 2013 led to LLNL filing a programmatic noncompliance report to the NTS in January 2014 titled, Programmatic noncompliance with topical areas within LLNL’s Work Planning and Control process.

99 GENERAL AND MISCELLANEOUS↗

Recent activities of the UK working party on criticality - 14334

The Working Party on Criticality (WPC) in the United Kingdom (UK) is the non-executive national committee that focuses on criticality safety issues up to, but not including, experimental and in-core power reactor operations. The current membership includes representatives from all relevant UK Site Licensee Companies and Regulators together with a small number of other key companies with interests in this area. In recent times, the primary focus of the committee has been to provide a forum for the discussion and distribution of information of relevance to criticality safety in the UK, particularly the sharing and development of good practice. However, it also serves as a useful forum to (i) disseminate regulatory issues of relevance to criticality safety and facilitate the development of a UK criticality community view on such matters, (ii) guide, promote, coordinate and encourage cooperation on high priority activities of common interest to the UK criticality community, (iii) promote international collaboration in the field of criticality safety, and (iv) provide opportunities for the professional development of criticality safety personnel. This paper gives a detailed overview of the activities of the WPC in the years since the last International Conference on Nuclear Criticality (ICNC), held at Edinburgh in 2011. It undoubtedly continued to be a challenging time for the UK criticality community, not least because of difficulties with the central coordination (and hence funding) of strategic issues in the UK as the nuclear industry has become increasingly fragmented. However, despite these issues, the committee has still been able to fulfil its objectives during that time and successfully supported the UK criticality community. A particular focus of the paper will be the success of the Continued Professional Development workshops and the potential benefits of other countries adopting a similar initiative. (author)

42 ENGINEERING↗

Material property characterization of 3D printed polypropylene wood plastic composites

Abstract Wood flour (WF) at 10 wt.% and 20 wt.% loadings was used as a reinforcing filler to enhance the applicability of polypropylene (PP) for 3D printing. After performing printability tests of PP wood plastic composites (WPCs), the mechanical properties of both injection‐molded and 3D‐printed PP WPC specimens were explored. Test specimens were prepared from 3D printed hexagons for analyzing the mechanical properties. Adding WF to neat PP increased the storage modulus and the glass transition temperature while decreasing the degree of crystallinity and the coefficient of thermal expansion, while enhancing the printability of neat PP. The tensile strength, tensile modulus of elasticity, flexural strength, and flexural modulus of elasticity of injection‐molded neat PP improved by up to 21%, 59%, 30%, and 56%, respectively, with 20 wt.% WF. However, the impact strength of injection‐molded neat PP decreased by 85%, with 20 wt.% WF. After 3D printing, the tensile strength and tensile modulus of elasticity of printed neat PP increased by up to 84% and 60%, respectively, with 20 wt.% WF. The flexural strength and flexural modulus of elasticity of neat printed PP remained unchanged compared to those of PP filled with 20 wt.% WF, while the impact strength decreased by 87%. Highlights WF was used as a reinforcement in polypropylene designed for 3D printing A pilot‐scale, pellet‐fed 3D printer was used to print hollow hexagons, and then test specimens were fabricated from these hexagons for mechanical properties The tensile and flexural properties of 3D printed neat polypropylene improved, while the impact strength decreased after adding 20 wt.% WF to the neat PP.

Hwang, Sungjun↗

Unraveling the 2021 Central Tennessee flood event using a hierarchical multi-model inundation modeling framework

Flood prediction systems need hierarchical atmospheric, hydrologic, and hydraulic models to predict rainfall, runoff, streamflow, and floodplain inundation. The accuracy of such systems depends on the error propagation through the modeling chain, sensitivity to input data, and choice of models. In this study, we used multiple precipitation forcings (hindcast and forecast) to drive hydrologic and hydrodynamic models to analyze the impacts of various drivers on the estimates of flood inundation depth and extent. We implement this framework to unravel the August 2021 extreme flooding event that occurred in Central Tennessee, USA. We used two radar-based quantitative precipitation estimates (STAGE4 and MRMS) as well as quantitative precipitation forecasts (QPF) from the National Weather Service Weather Prediction Center (WPC) to drive a series of models in the hierarchical framework, including the Variable Infiltration Capacity (VIC) land surface model, the Routing Application for Parallel Computation of Discharge (RAPID) river routing model, and the AutoRoute and TRITON inundation models. An evaluation with observed high-water marks demonstrates that the framework can reasonably simulate flood inundation. Despite the complex error propagation mechanism of the modeling chain, we show that inundation estimates are most sensitive to rainfall estimates. Most notably, QPF significantly underestimates flood magnitudes and inundations leading to unanticipated severe flooding for all stakeholders involved in the event. Finally, we discuss the implications of the hydrodynamic modeling framework for real-time flood forecasting.

54 ENVIRONMENTAL SCIENCES↗

Wood-reinforced composites by stereolithography with the stress whitening behavior

In this study, poplar wood flour at various concentrations (1–10 wt%) is incorporated into a methacrylate-based resin via solution blending to fabricate wood-reinforced composites using stereolithography apparatus (SLA) 3D printing. Differential scanning calorimetry (DSC) along with Fourier transform infrared spectroscopy (FTIR) analysis shows the presence of a small amount of residual monomer in the printed samples. For the printed composites, the glass transition temperature (T g ) from dynamic mechanical analysis (DMA) decreases as more wood flour is incorporated, which indicates an increase in free volume occupied by polymer chains. The tensile strength is improved up to 17.3% from 21.1 MPa (no wood flour) to 24.7 MPa (1.0 wt% wood flour). The highest Young’s modulus reaches 323.8 MPa (2.0 wt% wood flour), which is 1.9-fold of that of the sample without wood flour. Moreover, the composites show “stress whitening” with the addition of wood flour during the uniaxial drawing. Morphology analysis of the tested samples show that the formation of microcraze and microvoids likely causing the stress whitening. This is the first study that demonstrates wood flour can be utilized in SLA 3D printed wood plastic composites (WPC) which can reinforce the printed products with a modest loading amount.

36 MATERIALS SCIENCE↗

Development of polypropylene/wood flour ecocomposites. Evaluation of silane as coupling agent

The effects of Pinus Sylvestris wood flour as filler in polypropylene matrix was evaluated. The mechanical properties and the morphology of different wood flour/polypropylene composites (WPC) were studied. The composites materials were prepared with several amounts of wood flour from 10 to 30% wt. Mechanical properties show that the wood flour incorporation increases the rigidity of the composites. Morphological analysis indicates that agglomerates are formed, with amounts exceeding 30% of wood flour. For the silane--treated composites, the dispersion of the filler into the polypropylene (PP) matrix improved. Shore D hardness of the composites is decreased with the addition of the coupling agent.

36 MATERIALS SCIENCE↗

Materials and Component Development for Advanced Turbine Systems

In order to meet the 2010-2020 DOE Fossil Energy goals for Advanced Power Systems, future oxy-fuel and hydrogen-fired turbines will need to be operated at higher temperatures for extended periods of time, in environments that contain substantially higher moisture concentrations in comparison to current commercial natural gas-fired turbines. Development of modified or advanced material systems, combined with aerothermal concepts are currently being addressed in order to achieve successful operation of these land-based engines. To support the advanced turbine technology development, the National Energy Technology Laboratory (NETL) has initiated a research program effort in collaboration with the University of Pittsburgh (UPitt), and West Virginia University (WVU), working in conjunction with commercial material and coating suppliers as Howmet International and Coatings for Industry (CFI), and test facilities as Westinghouse Plasma Corporation (WPC) and Praxair, to develop advanced material and aerothermal technologies for use in future oxy-fuel and hydrogen-fired turbine applications. Our program efforts and recent results are presented.

ADSORPTION HEAT↗

DPC Cement Filler Development (Progress Report)

The fillers research and development (R&D) program, mostly experimental, is part of a broader R&D program that includes new process modeling and performance assessment of criticality effects and the overall importance of criticality to repository performance (consequence screening). A literature research and consultation effort with experts by Hardin and Brady (2018) identified several potentially effective and workable filler materials including cements (primarily phosphate based), moltenmetal alloys, and low-temperature glasses. Filler attributes were defined, and the preliminary lists were compared qualitatively. Further comparative analysis will be done (e.g., cost estimates) after experimental screening has narrowed the list of alternatives. The following cement filler compositions were selected for experimental development work and accelerated testing in FY20: Aluminum phosphate cements (APCs); more specifically aluminum oxide / aluminum phosphate (Al 2 O 3 / AlPO 4 ) cements in which Al 2 O 3 serves as the filler material bound by an AlPO 4 binder formed by the reaction of Al 2 O 3 with H 3 PO 4 ; Calcium phosphate cements (CPCs); more specifically composed of pure or nearly pure hydroxyapatite or HAP (Ca 5 (PO 4 ) 3 (OH)); Wollastonite phosphate cements (WPC), specifically wollastonite and aluminum or calcium aluminum phosphates in which CaSiO 3 serves as the filler material and the phosphate serves as the binder. The FY20 effort focused on the optimization of compositions and subsequent processing of these three materials to achieve dense and well-consolidated monolithic samples with 30 to 40% porosity and permeabilities of 1 millidarcy. At the close of this progress report the aluminum phosphate cements (APCs) and the wollastonite phosphate cements (WPCs) appear to show the most promise for continued development. Less progress has been made with the calcium phosphate cements (CPCs); their slurry viscosities are high (and difficult to measure) and they exhibit relatively short cure times of 2 to 3 hours with concomitant and excessive volatile (e.g. CO 2 ) generation.

36 MATERIALS SCIENCE↗

Naval Ship Counter Measure Capability (Final Report) [Slides]

Task 1: RUNQUIC.py was modified to add options 4 and 5, which run only the QUIC-PLUME and QUICPRESSURE codes without rerunning QUIC-URB. Task 2: We have verified that the RUNQUIC.py produces a WPC file to facilitate the interface with the CONTAM model. Task 3: RUNQUIC.py is now compatible with Python 3.8 and above. Task 4: The CMWD capability has been added QUIC-PLUME, which uses two new input files: QP_countermeasures.inp and QP_grounddep.inp. This first controls the efficiency of the CMWD system and when it is turned on and off and the second makes it possible to turn of tracking of surface deposition on the ocean surface. Task 5: This report was written for this task. Additionally, we are updating the QUIC Start Guide and RUNQUIC.py Guide, which will be made available once they have gone through the publication review process. Task 6: We performed a literature review on models for inertial deposition on the upwind faces of obstacles. We identified a model that was compatible with QUIC’s existing deposition model and implemented a first draft of this model in QUIC-PLUME. We have performed some preliminary qualitative testing, which shows the expected behavior. Further quantitative testing to fully validate the inertial deposition model.

97 MATHEMATICS AND COMPUTING↗

Whitestone Poncelet RISEC Project Final Technical Report

This report covers the development of the Poncelet Kinetics RHK100 Prototype. The work was completed by Hasz Consulting, LLC; CE2 Engineers, LLC; Energetic Drives, LLC; and Applied Power and Control all operating as subcontractors to Whitestone Power and Communications during the year from October 1, 2010 to September 23, 2011. As designed, the prototype is run-of-river instream energy conversion (RISEC) system. The design is principally a three-stage undershot water wheel arranged according to the method of General Poncelet. The power train consists of an epicyclic transmission coupled to a permanent magnet generator. The electronic controls system governs the speed of the wheel and rectifies the power signal to enable the system to be integrated with infinite grid infrastructures, to operate in parallel in finite grid applications with other small power productions sources or to operate in stand-alone mode on demand.

13 HYDRO ENERGY↗