Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PUREX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Laboratory Development of a Pot Calcination Process for Converting Liquid Wastes to Solids

Simulated Darex, Purex, Thorex, and TBP-25 wastes were batch-evaporated and calcined to solids. The weight of residue was decreased to ~ 8% of the original waste for Darex, to ~ 4% for Purex, to ~ 2% for Thorex, and ~ 7% for TBP-25 by calcination to 1200°C. Semicontinuous evaporation and calcination to solids at 900°C of Darex and Purex wastes gave volume reduction factors of ~ 8 and 7 to 10, respectively. The nitrate contents of the residues from batch calcination to 800°C were from ~ 0.07 to 0.5 wt % while the nitrate contents of the residues from semicontinuous calcination to 900°C were from ~ 0.1 to 0.7 wt %. Sodium, calcium, and magnesium additives to Purex waste decreased the percent of sulfate volatilized into the condensate from ~ 30% to <0.5%. Replacement of the atmosphere above the waste with nitric oxide decreased ruthenium volatility from 50 to 60% of that originally present in Purex waste to 0.5 to 3.5%. The thermal conductivities for the calcined wastes, measured in situ, were all >0.1 Btu/hr ft °F at ~ 400°F and increased almost linearly with increasing temperature to >0.3 Btu/hr ft °F at ~ 1600°F in all cases studied.

052001* -- Nuclear Fuels-- Waste Processing↗

Analysis of nuclear proliferation resistance reprocessing and recycling technologies

The PUREX process has been progressively and continuously improved during the past three decades, and these improvements account for successful commercialization of reprocessing in a few countries. The renewed interest in nuclear energy and the international growth of nuclear electricity generation do not equate – and should not be equated -with increasing proliferation risks. Indeed, the nuclear renaissance presents a unique opportunity to enhance the culture of non-proliferation. With the recent revival of interest in nuclear technology, technical methods for prevention of nuclear proliferation are being revisited. Robust strategies to develop new advanced separation technologies are emerging worldwide for sustainability and advancement of nuclear energy with enhanced proliferation resistance. On the other hand, at this moment, there are no proliferation resistance advanced technologies. . Until now proliferation resistance as it applies to reprocessing has been focused on not separating a pure stream of weapons-usable plutonium. France, as an example, has proposed a variant of the PUREX process, the COEX TM process, which does not result on a pure plutonium product stream. A further step is to implement a process based on group extraction of actinides and fission products associated with a homogeneous recycling strategy (UNEX process in the US, GANEX process in France). Such scheme will most likely not be deployable on an industrial scale before 2030 or so because it requires intensive R&D and robust flowsheets. Finally, future generation recycling schemes will handle the used nuclear fuel in fast neutron reactors. This means that the plutonium throughput of the recycling process may increase. The need is obvious for advanced aqueous recycling technologies that are intrinsically more proliferation resistant than the commercial PUREX process. In this paper, we review the actual PUREX process along with the advanced recycling technologies that will enhance technical barriers, making plutonium diversion more difficult by not isolating plutonium or/and coexistence of fission products with plutonium.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Hexavalent Americium Recovery Using Copper(III) Periodate

Separation of americium from the lanthanides is considered one of the most difficult separation steps in closing the nuclear fuel cycle. One approach to this separation could involve oxidizing americium to the hexavalent state to form a linear dioxo cation while the lanthanides remain as trivalent ions. This work considers aqueous soluble Cu3+ periodate as an oxidant under molar nitric acid conditions to separate hexavalent Am with diamyl amylphosphonate (DAAP) in n-dodecane. Initial studies assessed the kinetics of Cu3+ periodate auto-reduction in acidic media to aid in development of the solvent extraction system. Following characterization of the Cu3+ periodate oxidant, solvent extraction studies optimized the recovery of Am from varied nitric acid media and in the presence of other fission product, or fission product surrogate, species. Short aqueous/organic contact times encouraged successful recovery of Am (distribution values as high as 2) from nitric acid media in the absence of redox active fission products. In the presence of a post-PUREX simulant aqueous feed, precipitation of tetravalent species (Ce, Ru, Zr) occurred and the distribution values of 241Am were suppressed, suggesting some oxidizing capacity of the Cu3+ periodate is significantly consumed by other redox active metals in the simulant. The manuscript demonstrates Cu3+ periodate as a potentially viable oxidant for Am oxidation and recovery and notes the consumption of oxidizing capacity observed in the presence of the post-PUREX simulant feed will need to be addressed for any approach seeking to oxidize Am for separations relevant to the nuclear fuel cycle.

McCann, Kevin↗

Chemical Differences Between Sludge Solids at the F and H Area Tank Farms

The primary source of waste solids received into the F Area Tank Farm (FTF) was from PUREX processing performed to recover uranium and plutonium from irradiated depleted uranium targets. In contrast, two primary sources of waste solids were received into the H Area Tank Farm (HTF): a) waste from PUREX processing; and b) waste from H-modified (HM) processing performed to recover uranium and neptunium from burned enriched uranium fuel. Due to the differences between the irradiated depleted uranium targets and the burned enriched uranium fuel, the average compositions of the F and H Area wastes are markedly different from one another. Both F and H Area wastes contain significant amounts of iron and aluminum compounds. However, because the iron content of PUREX waste is higher than that of HM waste, and the aluminum content of PUREX waste is lower than that of HM waste, the iron to aluminum ratios of typical FTF waste solids are appreciably higher than those of typical HTF waste solids. Other constituents present at significantly higher concentrations in the typical FTF waste solids include uranium, nickel, ruthenium, zinc, silver, cobalt and copper. In contrast, constituents present at significantly higher concentrations in the typical HTF waste solids include mercury, thorium, oxalate, and radionuclides U-233, U-234, U-235, U-236, Pu-238, Pu-242, Cm-244, and Cm-245. Because of the higher concentrations of Pu-238 in HTF, the long-term concentrations of Th-230 and Ra-226 (from Pu-238 decay) will also be higher in HTF. The uranium and plutonium distributions of the average FTF waste were found to be consistent with depleted uranium and weapons grade plutonium, respectively (U-235 comprised 0.3 wt% of the FTF uranium, and Pu-240 comprised 6 wt% of the FTF plutonium). In contrast, at HTF, U-235 comprised 5 wt% of the uranium, and Pu-240 comprised 17 wt% of the plutonium, consistent with enriched uranium and high burn-up plutonium. X-ray diffraction analyses of various FTF and HTF samples indicated that the primary crystalline compounds of iron in sludge solids are Fe 2 O 3 , Fe 3 O 4 , and FeO(OH), and the primary crystalline compounds of aluminum are Al(OH) 3 and AlO(OH). Also identified were carbonate compounds of calcium, magnesium, and sodium; a nitrated sodium aluminosilicate; and various uranium compounds. Consistent with expectations, oxalate compounds were identified in solids associated with oxalic acid cleaning operations. The most likely oxidation states and chemical forms of technetium are assessed in the context of solubility, since technetium-99 is a key risk driver from an environmental fate and transport perspective. The primary oxidation state of technetium in SRS sludge solids is expected to be Tc(IV). In salt waste, the primary oxidation state is expected to be Tc(VII). The primary form of technetium in sludge is expected to be a hydrated technetium dioxide, TcO 2 ⋅ xH 2 O, which is relatively insoluble and likely co-precipitated with iron. In salt waste solutions, the primary form of technetium is expected to be the very soluble pertechnetate anion, TcO 4 - . The relative differences between the F and H Tank Farm waste provide a basis for anticipating differences that will occur as constituents of FTF and HTF waste residue enter the environment over the long-term future. If a constituent is significantly more dominant in one of the Tank Farms, its long-term environmental contribution will likely be commensurately higher, assuming the environmental transport conditions of the two Tank Farms share some commonality. It is in this vein that the information cited in this document is provided - for use during the generation, assessment, and validation of Performance Assessment modeling results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Characterization of High Level Waste from a Hybrid LIFE Engine for Enhanced Repository Performance

In the interest of providing unlimited greenhouse gas-free energy at low cost, the Laser Inertial Fusion Energy (LIFE) project provides a testbed for inertial confinement fusion technology. Proposed designs are a pure fusion reactor or a hybrid fusion-fission reactor, which includes a subcritical blanket of fissionable material to be irradiated by neutrons from the fusion reaction. Two possible fuels are considered: (1) used fuel from current reactors; (2) thorium. Amounts of high level waste (HLW) generated per kilowatt-hour (kW*h) produced are lower relative to current Light Water Reactors (LWR), but potential hazard associated with 1 ton of HLW from LIFE is superior. The scope of this study is to combine quantities and qualities of HLW from LIFE and determine the repository space required relative to HLW from LWR for a once through fuel cycle. Repository space was determined in terms of number of canisters required disposal of waste in the production of 1 kW*h. HLW properties were determined using the Oak Ridge Isotope GENeration code (ORIGEN-S) and waste was conditioned and stored in borosilicate glass. For a LWR, the fuel was burnt to 50 gigawatt-days per tonne heavy metal (GWd/tHM) then reprocessed through Plutonium Uranium Extraction (PUREX). For LIFE, fuel burnup varied from 478.6 to 971.8 GWd/tHM and both PUREX reprocessing and conditioning with no separation were analyzed. HLW load per canister was determined for each fuel by combining mass, decay heat, and composition constraints, but the decay heat constraint was eliminated, allowing the spent fuel to cool before solidification. If PUREX reprocessing is applied, LIFE requires 1.47E-10 and 1.39E-10 canisters per kW*h for used fuel and thorium fuel, respectively. A LWR requires 1.56E-10 canisters per kW*h. Limiting constraints for LIFE spent fuel were mass of the canister, mass fraction of the glass frit, or molybdenum trioxide mass fraction. If uranium and plutonium are not separated from LIFE spent fuel, then 2.10E-10 and 1.96E-10 canisters are required per kW*h, for the used fuel and thorium fuel, respectively. Required number of canisters decreases with increased fuel burnup. HLW waste disposal of LIFE is not only feasible, but more efficient than LWR with separation per kW*h. High burnups of LIFE offer the greatest waste performance benefit. Limitations of the study include assumption of generic processing or PUREX extraction for LIFE fuel. Future work will include environmental impact after canister failure.

42 ENGINEERING↗

MONITORING AND MODELLING OF RADIOLYTIC DEGRADATION PRODUCTS OF TBP/n-DODECANE

The Plutonium Uranium Extraction (PUREX) solvent system was developed for the separation of plutonium and uranium from irradiated fuel. Since the implementation of this process, the degradation chemistry associated with the irradiated solvent system, tributyl phosphate (TBP)/n-dodecane/nitric acid has been extensively studied as the integrity of the organic solvent is paramount for reproducible performance of the separation flowsheet (extraction/scrub/strip) during multiple cycles. In PUREX-like processes, the extent of decomposition is dependent not only upon the solvent, but also upon the presence of constituents, such as nitric acid, that interact with TBP and increase its susceptibility to radiolytic degradation. The build-up of degradation products in the organic phase alters process flowsheet performance via modification of the metal ions speciation, loss of solvent components, and enhanced water transport into the organic phase. On-line identification and quantification of the solvent degradation products would provide the necessary information for more detailed process control as well as providing the basis for timing solvent washing or replacement. In our research, we are exploring the potential of on-line monitoring for the PUREX solvent radiolytic degradation products. To identify degradation products, TBP/n-dodecane solvent, contacted with aqueous nitric acid solutions of variable concentrations are subjected to various gamma radiation external doses then analyzed by electro-spray ionization mass spectrometry (ESMS). In addition, vibrational spectroscopy is utilized to monitor and quantify major degradation products including dibutyl phosphoric acid (HDBP) and monobutyl phosphoric acid (H2MBP) in TBP/n-dodecane solvent. The compiled spectroscopic databases serve for developing interpretive and predictive chemometric models for the quantification of the PUREX solvent degradation products.

Peterson, James M.↗

Selective Partitioning of Ruthenium from Nitric Acid Media

Ruthenium removal from PUREX raffinate solutions is imperative for the application of some advanced actinide partitioning technologies, particularly partitioning of hexavalent americium. Ruthenium interferes with the oxidation of americium and suppresses its extraction. Selective extraction of ruthenium from these solutions is complicated by the existence of multiple ruthenium species in nitric acid. In this work, ruthenium is selectively extracted from nitric acid media through oxidation to ruthenium tetroxide and absorption into polymer beads. Extraction of ruthenium tetroxide into a variety of organic solvents is also explored. The use of UV-Visible spectroscopy to quantify extraction of ruthenium tetroxide was demonstrated. This method for extraction of ruthenium from nitric acid was applied to PUREX raffinate simulant solution and was found to simultaneously remove ruthenium (through oxidation and absorption) and zirconium (through precipitation). This method not only removes ruthenium and zirconium from solution but also separates ruthenium and zirconium from each other. Thus, the two most problematic fission product elements for the PUREX process are separated in a single step. Further, americium was not extracted or sorbed, which should allow it to be partitioned following ruthenium/zirconium removal using existing oxidative treatments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A COMPARISON OF HANFORD AND SAVANNAH RIVER SITE HIGH-LEVEL WASTES

This study is a simple comparison of high-level waste from plutonium production stored in tanks at the Hanford and Savannah River sites. Savannah River principally used the PUREX process for plutonium separation. Hanford used the PUREX, Bismuth Phosphate, and REDOX processes, and reprocessed many wastes for recovery of uranium and fission products. Thus, Hanford has 55 distinct waste types, only 17 of which could be at Savannah River. While Hanford and Savannah River wastes both have high concentrations of sodium nitrate, caustic, iron, and aluminum, Hanford wastes have higher concentrations of several key constituents. The factors by which average concentrations are higher in Hanford salt waste than in Savannah River waste are 67 for {sup 241}Am, 4 for aluminum, 18 for chromium, 10 for fluoride, 8 for phosphate, 6 for potassium, and 2 for sulfate. The factors by which average concentrations are higher in Hanford sludges than in Savannah River sludges are 3 for chromium, 19 for fluoride, 67 for phosphate, and 6 for zirconium. Waste composition differences must be considered before a waste processing method is selected: A method may be applicable to one site but not to the other.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

SOLVENT EXTRACTION RESEARCH AND DEVELOPMENT IN THE U.S. FUEL CYCLE PROGRAM

Treatment or processing of used nuclear fuel to recycle uranium and plutonium has historically been accomplished using the well known PUREX process. The PUREX process has been used on an industrial scale for over 60 years in the nuclear industry. Research is underway to develop advanced separation methods for the recovery of other used fuel components, such as the minor actinides (Np, Am, Cm) for possible transmutation in fast spectrum reactors, or other constituents (e.g. Cs, Sr, transition metals, lanthanides) to help facilitate effective waste management options. This paper will provide an overview of new solvent extraction processes developed for advanced nuclear fuel cycles, and summarize recent experimental results. This will include the utilization of new extractants for selective separation of target metals and new processes developed to selectively recover one or more elements from used fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Overview of reductants utilized in nuclear fuel reprocessing/recycling

The most widely used reductant to partition plutonium from uranium in the Purex process was ferrous sulfamate, other alternates were proposed such as hydrazine-stabilized ferrous nitrate or uranous nitrate, platinum catalyzed hydrogen, and hydrazine, hydroxylamine salts. New candidates to replace hydrazine or hydroxylamine nitrate (HAN) are pursued worldwide. They may improve the performance of the industrial Purex process towards different operations such as de-extraction of plutonium and reduction of the amount of hydrazine which will limit the formation of hydrazoic acid. When looking at future recycling technologies using hydroxamic ligands, neither acetohydroxamic acid (AHA) nor formohydroxamic acid (FHA) seem promising because they hydrolyze to give hydroxylamine and the parent carboxylic acid. Hydroxyethylhydrazine, HOC{sub 2}H{sub 4}N{sub 2}H{sub 3} (HEH) is a promising non-salt-forming reductant of Np and Pu ions because it is selective to neptunium and plutonium ions at room temperature and at relatively low acidity, it could serve as a replacement of HAN or AHA for the development of a novel used nuclear fuel recycling process.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Vibrational spectroscopy for online monitoring of extraction solvent degradation products

In our research, we are exploring the potential of online monitoring of the organic solvents for the flowsheets relevant to the used nuclear fuel reprocessing and tributyl phosphate (TBP)- based extraction processes in particular. Utilization of vibrational spectroscopic techniques permits the discrimination of the degradation products from the primary constituents of the loaded extraction solvent. Multivariate analysis of the spectral data facilitates development of the regression models for their quantification in real time and potentially enables online implementation of a monitoring system. Raman and FTIR spectral databases were created and used to develop the regression partial least squares (PLS) chemometric models for the quantitative prediction of HDBP (dibutyl phosphoric acid) degradation product, TBP, and UO{sub 2}{sup 2+} extraction organic product phase. It was demonstrated that both these spectroscopic techniques are suitable for the quantification of the Purex solvent components in the presence of UO{sub 2}(NO{sub 3}){sub 2}. Developed PLS models successfully predicted HDBP and TBP organic concentrations in simulated Purex solutions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A New Group Crystallization Approach in Used Nuclear Fuel Recycling: A Look at Fission Product Behaviors

Nuclear energy has the potential to play a large role in meeting future needs of the U.S. sustainable energy strategy, as a clean, carbon-free power source. However, to take advantage of the inherent benefits, many hurdles must be overcome in order for nuclear power to achieve these expectations. One of the largest challenges faced, is the management of used nuclear fuel (UNF). Currently, no strategy has been identified to deal with the growing UNF problem, and so the UNF remains stored on site at nuclear power plants either in cooling pools or in dry cast storage. The amount of stored UNF continues to grow, and with it, so does the concern surrounding its long-term radiotoxicity. This material could be reprocessed to recover the actinides, maximizing the energy potential of the UNF and minimizing the waste generation. Not only do U and Pu, the major energy producing actinides, need to be recovered, but recovering Np and Am would make waste generated from reprocessing significantly safer for long-term storage in a geological repository. There are a number of methods currently in use to reprocess UNF; throughout Europe, the Purex process is widely implemented, while the Japanese have developed the Next process. The Next process removes a bulk of the U by crystallization prior to a Purex-like separation scheme. In the Next process, it is undesirable to have any other species removed from solution in the crystallization step, but rather the goal is to obtain a pure uranyl nitrate hexahydrate (UNH) product. Alternatively, a group separation of U-Am by a crystallization process would provide an elegant solution. Such a process has become attainable with the renewed interest in accessing Am(VI) in nitric acid solutions. In order to synthesize and stabilize Am(VI), a highly oxidizing system is required, which has only been demonstrated on a limited basis. By oxidizing Np, Pu, and Am to their hexavalent state, they can be co-crystallized with UNH, and thereby removed from solution. Recent results have demonstrated that all the hexavalent actinide (An) species are removed from solution in near proportion, by a simple reduction of temperature in 6-8 M HNO{sub 3}. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A New Group Crystallization Approach in Used Nuclear Fuel Recycling: A Look at Fission Product Behaviors

Nuclear energy has the potential to play a large role in meeting future needs of the U.S. sustainable energy strategy, as a clean, carbon-free power source. However, to take advantage of the inherent benefits, many hurdles must be overcome in order for nuclear power to achieve these expectations. One of the largest challenges faced, is the management of used nuclear fuel (UNF). Currently, no strategy has been identified to deal with the growing UNF problem, and so the UNF remains stored on site at nuclear power plants either in cooling pools or in dry cask storage. The amount of stored UNF continues to grow, and with it, so does the concern surrounding its long-term radiotoxicity. This material could be reprocessed to recover the actinides, maximizing the energy potential of the UNF and minimizing the waste generation. Not only do U and Pu, the major energy producing actinides, need to be recovered, but recovering Np and Am would make waste generated from reprocessing significantly safer for long-term storage in a geological repository. There are a number of methods currently in use to reprocess UNF; throughout Europe, the Purex process is widely implemented, while the Japanese have developed the Next process. The Next process removes a bulk of the U by crystallization prior to a Purex-like separation scheme. In the Next process, it is undesirable to have any other species removed from solution in the crystallization step, but rather, the goal is to obtain a pure uranyl nitrate hexahydrate (UNH) product. Alternatively, a group separation of U-Am by a crystallization process would provide an elegant solution. Such a process has become attainable with the renewed interest in accessing Am(VI) in nitric acid solutions. In order to synthesize and stabilize Am(VI) which has only been demonstrated on a limited basis, a highly oxidizing system is required. By oxidizing Np, Pu, and Am to their hexavalent state, they can be co-crystallized with UNH, and thereby removed from solution. Recent results have demonstrated that all the hexavalent actinide (An) species are removed from solution in near proportion, by a simple reduction of temperature in 6-8 M HNO{sub 3}.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Aqueous Reprocessing of Used Nuclear Fuel

Aqueous reprocessing of used nuclear fuel has a long history of successful operation worldwide. The history of aqueous reprocessing and a description of current and past operating aqueous reprocessing facilities are provided and the main types of solvent extraction equipment utilized in the nuclear industry are described. While the PUREX process is well established for separating U and Pu from used nuclear fuel, numerous variants to the PUREX process are being developed and are described. Finally, advanced separation processes in which minor actinides are separated from the used nuclear fuel are a key research focus worldwide. These processes and the current state of development are discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

FY-2010 Process Monitoring Technology Final Report

During FY 2010, work under the Spectroscopy-Based Process Monitoring task included ordering and receiving four fluid flow meters and four flow visible-near infrared spectrometer cells to be instrumented within the centrifugal contactor system at Pacific Northwest National Laboratory (PNNL). Initial demonstrations of real-time spectroscopic measurements on cold-stream simulants were conducted using plutonium (Pu)/uranium (U) (PUREX) solvent extraction process conditions. The specific test case examined the extraction of neodymium nitrate (Nd(NO3)3) from an aqueous nitric acid (HNO3) feed into a tri-n-butyl phosphate (TBP)/ n-dodecane solvent. Demonstration testing of this system included diverting a sample from the aqueous feed meanwhile monitoring the process in every phase using the on-line spectroscopic process monitoring system. The purpose of this demonstration was to test whether spectroscopic monitoring is capable of determining the mass balance of metal nitrate species involved in a cross-current solvent extraction scheme while also diverting a sample from the system. The diversion scenario involved diverting a portion of the feed from a counter-current extraction system while a continuous extraction experiment was underway. A successful test would demonstrate the ability of the process monitoring system to detect and quantify the diversion of material from the system during a real-time continuous solvent extraction experiment. The system was designed to mimic a PUREX-type extraction process with a bank of four centrifugal contactors. The aqueous feed contained Nd(NO3)3 in HNO3, and the organic phase was composed of TBP/n-dodecane. The amount of sample observed to be diverted by on-line spectroscopic process monitoring was measured to be 3 mmol (3 x 10-3 mol) Nd3+. This value was in excellent agreement with the 2.9 mmol Nd3+ value based on the known mass of sample taken (i.e., diverted) directly from the system feed solution.

process monitoring, spectroscopy-based monitoring,↗

Managing Zirconium Chemistry and Phase Compatibility in Combined Process Separations for Minor Actinide Partitioning

In response to the NEUP Program Supporting Fuel Cycle R&D Separations and Waste Forms call DEFOA- 0000799, this report describes the results of an R&D project focusing on streamlining separation processes for advanced fuel cycles. An example of such a process relevant to the U.S. DOE FCR&D program would be one combining the functions of the TRUEX process for partitioning of lanthanides and minor actinides from PUREX(UREX) raffinates with that of the TALSPEAK process for separating transplutonium actinides from fission product lanthanides. A fully-developed PUREX(UREX)/TRUEX/TALSPEAK suite would generate actinides as product(s) for reuse (or transmutation) and fission products as waste. As standalone, consecutive unit-operations, TRUEX and TALSPEAK employ different extractant solutions (solvating (CMPO, octyl(phenyl)-N,Ndiisobutylcarbamoylmethylphosphine oxide) vs. cation exchanging (HDEHP, di-2(ethyl)hexylphosphoric acid) extractants), and distinct aqueous phases (2-4 M HNO 3 vs. concentrated pH 3.5 carboxylic acid buffers containing actinide selective chelating agents). The separate processes may also operate with different phase transfer kinetic constraints. Experience teaches (and it has been demonstrated at the lab scale) that, with proper control, multiple process separation systems can operate successfully. However, it is also recognized that considerable economies of scale could be achieved if multiple operations could be merged into a single process based on a combined extractant solvent. The task of accountability of nuclear materials through the process(es) also becomes more robust with fewer steps, providing that the processes can be accurately modeled. Work is underway in the U.S. and Europe on developing several new options for combined processes (TRUSPEAK, ALSEP, SANEX, GANEX, ExAm are examples). There are unique challenges associated with the operation of such processes, some relating to organic phase chemistry, others arising from the variable composition of the aqueous medium. This project targets in particular two problematic issues in designing combined process systems: managing the chemistry of challenging aqueous species (like Zr 4+ ) and optimizing the composition and properties of combined extractant organic phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvent Recovery and Management at the Savannah River Site H-Canyon Facility

NIOWAVE, Inc. is a domestic supplier of medical and industrial isotopes from uranium and radium. The Savannah River National laboratory (SRNL) is currently providing support to NIOWAVE, which plans to deploy a superconducting electron linear accelerator (LINAC) to fission uranium for Mo-99 production without the need for a nuclear reactor or HEU. The uranium from the Mo-99 production targets will be purified using a modified PUREX (Plutonium Uranium Reduction Extraction) solvent extraction process to recover the uranium in the product stream. The uranium will then be precipitated as an oxalate which is calcined to U 3 O 8 to fabricate pellets for new Mo-99 targets. In previous support provided to NIOWAVE, the SRNL demonstrated a solvent washing process to remove degradation products from the tributyl phosphate (TBP) solvent used in the modified PUREX process under development for uranium recovery. To supplement this technology demonstration, NIOWAVE requested the SRNL to provide summary information on the solvent recovery and management activities which are used at the Savannah River Site (SRS) H-Canyon facility. An existing reference document for the reprocessing of irradiated HEU fuels at the SRS was used as the primary reference for the solvent management activities; although, other reference documents were used to provide supplementary information. The information provided includes a brief summary of the solvent degradation issues which have been observed in the H-Canyon solvent extraction cycles and resulting process safety concerns. The solvent recovery processes for the three cycles of solvent extraction used in the H-Canyon were subsequently described including the process equipment which consists of the continuous and batch solvent washers, pumps, and tanks. A final section is provided on the monitoring and analysis of solvent quality based on the previous work performed at the SRNL for NIOWAVE and past research and development activities performed to support the solvent extraction processes in both the SRS F-Canyon and H-Canyon facilities.

07 ISOTOPE AND RADIATION SOURCES↗

U.S. program assessing nuclear waste disposal in space - A status report

Various concepts for the space disposal of nuclear waste are discussed, with attention given to the destinations now being considered (high earth orbit, lunar orbit, lunar surface, solar orbit, solar system escape, sun). Waste mixes are considered in the context of the 'Purex' (Plutonium and Uranium extraction) process and the potential forms for nuclear waste disposal (ORNL cermet, Boro-silicate glass, Metal matrix, Hot-pressed supercalcine) are described. Preliminary estimates of the energy required and the cost surcharge needed to support the space disposal of nuclear waste are presented (8 metric tons/year, requiring three Shuttle launches). When Purex is employed, the generated electrical energy needed to support the Shuttle launches is shown to be less than 1%, and the projected surcharge to electrical users is shown to be slightly more than two mills/kW-hour.

Rice, E. E.↗