Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Magellan Venus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Global views of Venus from Magellan

Magellan data for Venus reveal a planet with a great diversity of volcanic and tectonic landforms, with good evidence of continuing volcanism and tectonism. Weathering, mass wasting and wind erosion and deposition have modified the surface only to the extent of a few meters, thereby preserving an excellent record of tectonic and volcanic processes on a terrestrial-size planet. All cycle 1 mosaics, radiometry, and altimeter data will be made available through the Planetary Data System and the National Space Science Data Center.

Arvidson, R. E.↗

Height and altitude distribution of large volcanoes on Venus

Magellan data reveal 156 large volcanoes on Venus (greater than 100 km in diameter) which range in height from 300 m to 5.55 km, with an average height of 1.42 km. On the basis of theory it has been predicted that the development of neutral buoyancy zones (NBZ) on Venus and thus the resulting volcanic deposits are strongly influenced by the altitude-controlled variations in surface pressure. The distribution and height of these large volcanoes as a function of altitude was examined to begin to test these predications. Although large volcanoes are relatively uniformly distributed in altitude, there may be a slight paucity of volcanoes at the lowest elevations and a slight surplus at mid-altitudes. In addition, it is observed that the volcanoes at the highest altitudes tend to be the tallest. The observed distributions at low-mid altitudes is consistent with the prediction of NBZ theory. The high altitude distribution and heights, however, emphasize the necessity of considering other factors, such as tectonic setting, edifice age, magma supply, and thermal gradient, in describing the location and development of large volcanoes on Venus.

Keddie, S. T.↗

Effects of Planetary Thermal Structure on the Ascent and Cooling of Magma on Venus

Magellan radar images of the surface of Venus show a spatially broad distribution of volcanic features. Models of magmatic ascent processes to planetary surfaces indicate that the thermal structure of the interior significantly influences the rate of magmatic cooling and thus the amount of magma that can be transported to the surface before solidification. In order to understand which aspects of planetary thermal structure have the greatest influence on the cooling of buoyantly ascending magma, we have constructed magma cooling profiles for a plutonic ascent mechanism, and evaluated the profiles for variations in the surface and mantle temperature, surface temperature gradient, and thermal gradient curvature. Results show that, for a wide variety of thermal conditions, smaller and slower magma bodies are capable of reaching the surface on Venus compared to Earth, primarily due to the higher surface temperature of Venus. Little to no effect on the cooling and transport of magma are found to result from elevated mantle temperatures, elevation-dependent surface temperature variations, or details of the thermal gradient curvature. The enhanced tendency of magma to reach the surface on Venus may provide at least a partial explanation for the extensive spatial distribution of observed volcanism on the surface.

Sakimoto, Susan E. H.↗

Estimates of lithospheric thickness on Venus

Magellan altimetry data have revealed many examples of topographic flexure on Venus. Modeling of flexural features is of interest as it provides information on spatial (and for the earth, temporal) variations in lithospheric thickness. Lithospheric thickness may be determined solely from modeling topographic flexure or by combining gravity and topography data. On Venus even the highest resolution gravity is insufficient for modeling all but the very longest wavelength flexural features, so we rely heavily on altimetry data for information about lithospheric thickness. Sandwell and Schubert modeled flexure around four coronae and found lithospheric thicknesses h, in the range 35 - 70 km. Studies of several more flexural features suggests that these are typical of Aphrodite Terra and other chasmata regions on Venus. However lithospheric thicknesses associated with other regions are in the range 15-30 km. McKenzie et al. noted that part of Aphrodite Terra appeared similar in planform and morphology to the subduction zones of the East Indies on Earth. Other flexure studies using Magellan data have looked at smaller coronae (h = 5-30 km) and rifts (h = 8-20 km). It can be seen that the range of thicknesses suggested by studies to date is extremely large, and it is difficult to establish whether their mean is in agreement with that predicted by heat flow scaling arguments (h approximately 18 km). Here we present results from a global study of flexure on Venus, with particular emphasis on the variation in our results with different tectonic settings.

Johnson, C. L.↗

The origins of radial fracture systems and associated large lava flows on Venus

Magellan images have revealed the existence of systems of radial fractures on venus that are very similar in form to terrestrial dike swarms such as the Mackenzie swarm in Northern Canada. The association of many of the fracture systems with lava flows, calderas, and volcanic edifices further support the idea of a dike emplacement origin. A global survey of the Magellan images has allowed the location of 300 such fracture systems. Two types of fracture systems are defined. A series of models were developed to simulate the emplacement of dikes on Venus. Observations of fracture lengths and widths were then used to constrain the emplacement conditions. The model results show that the great length and relatively large width of the fractures can only be explained if the dikes that produce them were emplaced in high driving pressure (pressure buffered) conditions. Such conditions imply high rates of melt production, which is consistent with the melt being derived directly from a plume head. We have recently modeled the vertical emplacement of a dike from the top of a mantle plume and calculated the eruption rates such a dike would produce on reaching the surface. This modeling shows that eruption rates of approximately 0.1 cu km/hr can readily be generated by such a dike, consistent with the above results. However, the sensitivity of the model to dike width and therefore driving pressure means that eruption rates from dikes emplaced from the base of the crust or the head of a mantle plume could be orders of magnitude higher than this. Clearly, therefore, the model needs to be refined in order to better constrain eruption conditions. However, it is worth noting here that the initial results do show that even for moderate dike widths, eruption rates could be at least on the order of those estimated for terrestrial flood basalts.

Parfitt, Elisabeth A.↗

Magellan to Venus

This video presents cell animation of the Magellan approach to Venus, orbit insertion, and mapping sequence.

Source record↗

Hot-spot tectonics of Eistla Regio, Venus: Results from Magellan images and Pioneer Venus gravity

Eistla Regio (ER) is a broad, low, discontinuous topographic rise striking roughly EW at low northern latitudes of Venus. Some 2000 x 7000 km in dimensions, it is the third largest rise in planform on Venus after Aphrodite Terra and Beta Phoebe Regiones. These rises are the key physiographic elements in a hot spot model of global tectonics including transient plume behavior. Since ER is the first such rise viewed by Magellan and the latitude is very favorable for Pioneer Venus gravity studies, some of the predictions of a time dependent hot spot model are tested. Western ER is defined as the rise including Gula and Sif Mons and central ER as that including Sappho Patera. Superior conjunction prevented Magellan from returning data on eastern ER (Pavlova) during the first mapping cycle. It is concluded that the western and central portions of ER, while part of the same broad topographic rise and tectonic framework, have distinctly different surface ages and gravity signatures. The western rise, including Gula and Sif Mons, is the expression of deep seated uplift with volcanism limited to the individual large shields. The eastern portion has been widely resurfaced more recently by thermal anomalies in the mantle.

Grimm, Robert E.↗

Patterns of deformation and volcanic flows associated with lithospheric loading by large volcanoes on Venus

Magellan radar imaging and topography data are now available for a number of volcanoes on Venus greater than 100 km in radius. These data can be examined to reveal evidence of the flexural response of the lithosphere to the volcanic load. On Venus, erosion and sediment deposition are negligible, so tectonic evidence of deformation around large volcanoes should be evident except where buried by very young flows. Radar images reveal that most tectonic features and flow units on the flanks of these volcanoes have predominantly radial orientations. However, both Tepev Mons in Bell Regio and Sapas Mons in Atla Regio exhibit circumferential graben on their flanks. In addition, images reveal several flow units with an annular character around the north and west flanks of Tepev Mons. This pattern most likely results from ponding of flows in an annular flexural moat. Maat Mons in Atla Regio and Sif Mons in Eistla Regio are examples of volcanoes that lack circumferential graben and annular flows; discernible flow units and fractures on these constructs appear to be predominantly radial. Altimetry data can also provide evidence of flexural response. Tepev Mons is partially encircled by depressions that may be sections of a flexural moat that has not been completely filled. The locations of these depressions generally coincide with the annular flows described above. There is weaker evidence for such depressions around Maat Mons as well. The lack of circumferential tectonic features around most volcanoes on Venus might be explained by gradual moat filling and coverage by radial flows. The depressions around Tepev (and possible Maat) may indicate that this process is currently continuing. We use analytic models of plate flexure in an axisymmetric geometry to constrain the elastic plate thickness supporting Tepev Mons. If we consider the outer radius of the ponded flows to be the edge of a moat, we find that models with elastic plate thickness of 10-20 km fit best. Finite element models of a volcanic load detached from the underlying lithosphere predict overthrusting and radial normal faulting at the volcano's edge. Such a mechanism for the formation of radial rift zones on Venus volcanoes would make such features analogous to structures on the flanks of volcanoes on Earth.

Mcgovern, Patrick J.↗

Estimating lithospheric properties at Atla Regio, Venus

Magellan spehrical harmonic gravity and topography models are used to estimate lithospheric properties at Alta Regio, Venus, a proposed hotspot with dynamic support from mantle plume(s). Global spherical harmonic and local representations of the gravity field share common properties in the Atla region interms of their spectral behavior over a wavelength band from approximately 2100 to approximately 700 km. The estimated free-air admittance spectrum displays a rather featureless long-wavelength portion followed by a sharp rise at wavelengths shorter than about 1000 km. This sharp rise requires significant flexural support of short-wavelength structures. The Bouguer coherence also displays a sharp drop in this wavelength band, indicating a finite flexural rigidity of the lithosphere. A simple model for lithospheric loading from above and below is introduced (D. W. Forsyth, 1985) with four parameters: f, the ratio of bottom loading to top loading; z(sub m), crustal thickness; z(sub l) depth to bottom loading source; and T(sub e) elastic lithosphere thickness. A dual-mode compensation model is introduced in which the shorter wavelengths (lambda approximately less than 1000 km) might be explained best by a predominance of top loading by the large shield volcanoes Maat Mons, Ozza Mons, and Sapas Mons, and the longer wavelengths (lambda approximately greater than 1500 km) might be explained best by a deep depth of compensation, possibly representing bottom loading by a dynamic source. A Monte Carlo inversion technique is introduced to thoroughly search out the four-space of the model parameters and to examine parameter correlation in the solutions. Venus either is a considerabe deficient in heat sources relative to Earth, or the thermal lithosphere is overthickened in response to an earlier episode of significant heat loss from the planet.

Phillips, Roger J.↗

Radar scattering properties of pancakelike domes on Venus

Magellan radar images have disclosed the presence of a large number of almost perfectly circular domes, presumably of volcanic origin, in many regions of Venus several with diameters of 30 km or more. Their high degree of symmetry has permitted measurements of their shape, as determined by the Magellan altimeter to be compared with models of dome production from the eruption of high-viscosity magmas. In this work, we examine in detail the radar images of domes in Rusalka Planitia (2.8 deg S, 150.9 deg E) and Tinatin Planitia (12.2 deg N, 7.5 deg E), selected for their circular symmetry and apparent absence of modification due to large-scale slumping or tectonic rifting.

Ford, P. G.↗

Radar properties of several fluidized ejecta blankets on Venus

Magellan SAR imagery, altimetry, and radiometry are being analyzed to characterize the radar properties of the fluidized ejecta blankets (FEB's) that are associated with over 40 percent of the impact craters on Venus. The FEB flows and plains units surrounding the craters Isabella (175 km), Addams (90 km), Seymore (65 km), and a crater located at 4 S, 155.5 E (70 km) are examined here using the MIT-produced ARCDR and GxDR data. Individual orbital footprints obtained from the ARCDR's have been classified according to their dominant simple geologic unit (e.g., plains, FEB flows). This permits average values of reflectivity (corrected for diffuse scattering), rms meter-scale slopes, emissivity, and SAR backscatter to be calculated for each unit. GxDR images provide a means of visualizing the spatial relations between the various data sets. Variability of radar properties within the FEB's and relative to surrounding regions may have implications concerning the genesis and possible emplacement mechanisms of fluidized ejecta.

Johnson, J. R.↗

Surface processes on Venus

Magellan synthetic aperture radar (SAR) and altimetry data were analyzed to determine the nature and extent of surface modification for venusian plains in the Sedna Planitia, Alpha Regio, and western Ovda Regio areas. Specific cross sections derived from the SAR data were also compared to similar data for dry terrestrial basaltic lava flows (Lunar Crater and Cima volcanic fields) and playas (Lunar and Lavic Lakes) for which microtopographic profiles (i.e., quantitative roughness information) were available.

Arvidson, R. E.↗

Microwave signatures and surface properties of Ovda Regio and surroundings, Venus

Magellan observations of horizontally and vertically polarized emissivity and radar specific cross sections are jointly modeled to separate dielectric constants from textural effect for lobate plains, fractured plains, fracture belts, festoon flows, and tessera in Ovda Regio and surroundings. The model assumes surface emission and scattering dominate and that signatures are controlled by a combination of quasi-specular and diffuse-scale mechanisms. Textural parameters are found to correlate with geology whereas dielectric constants are found to depend on elevation. A gradual increase in dielectric constant from rock-like values (4 to 5) to a value of approximately 50 is evident over the interval from 6054 to 6056 km, where elevations are derived from Magellan altimetry observations. Stereo radargrammetric analyses demonstrate that a return to rock-like values occurs over approximately 0.5 km above the terrain with highest dielectric constants. The abrupt return to rock-like values occurs independently of geology and reinforces the hypothesis of elevation control on dielectric constant values. Variations in dielectric constant with elevation are modeled using an 1000-ppm concentration of a ferroelectric mineral with a Curie temperature of 707 K. The model reproduces the abrupt change at highest elevations, as the Curie temperature is reached, and the gradual change as lower elevations are encountered. To our knowledge no other model explains the trends with such simplicity.

Arvidson, R. E.↗

Aeolian features on Venus - Preliminary Magellan results

About 44 percent of the surface of Venus has been searched in a reconnaissance mode for wind-related features using primarily cycle 1 Magellan radar data. The aeolian features, including possible dune fields, yardangs, and various types of wind streaks, are described, and the geological settings and properties of the surfaces in which they occur are assessed. Attention is also given to possible modes of formation of the most common aeolian features (wind streaks), with reference made to terrestrial examples. The relationships between aeolian features and atmospheric circulation patterns on Venus are considered.

Greeley, Ronald↗

A pattern recognition system for locating small volvanoes in Magellan SAR images of Venus

The Magellan data set constitutes an example of the large volumes of data that today's instruments can collect, providing more detail of Venus than was previously available from Pioneer Venus, Venera 15/16, or ground-based radar observations put together. However, data analysis technology has not kept pace with data collection and storage technology. Due to the sheer size of the data, complete and comprehensive scientific analysis of such large volumes of image data is no longer feasible without the use of computational aids. Our progress towards developing a pattern recognition system for aiding in the detection and cataloging of small-scale natural features in large collections of images is reported. Combining classical image processing, machine learning, and a graphical user interface, the detection of the 'small-shield' volcanoes (less than 15km in diameter) that constitute the most abundant visible geologic feature in the more that 30,000 synthetic aperture radar (SAR) images of the surface of Venus are initially targeted. Our eventual goal is to provide a general, trainable tool for locating small-scale features where scientists specify what to look for simply by providing examples and attributes of interest to measure. This contrasts with the traditional approach of developing problem specific programs for detecting Specific patterns. The approach and initial results in the specific context of locating small volcanoes is reported. It is estimated, based on extrapolating from previous studies and knowledge of the underlying geologic processes, that there should be on the order of 10(exp 5) to 10(exp 6) of these volcanoes visible in the Magellan data. Identifying and studying these volcanoes is fundamental to a proper understanding of the geologic evolution of Venus. However, locating and parameterizing them in a manual manner is forbiddingly time-consuming. Hence, the development of techniques to partially automate this task were undertaken. The primary constraints for this particular problem are that the method must be reasonably robust and fast. Unlike most geological features, the small volcanoes of Venus can be ascribed to a basic process that produces features with a short list of readily defined characteristics differing significantly from other surface features on Venus. For pattern recognition purposes the relevant criteria include (1) a circular planimetric outline, (2) known diameter frequency distribution from preliminary studies, (3) a limited number of basic morphological shapes, and (4) the common occurrence of a single, circular summit pit at the center of the edifice.

Burl, M. C.↗

Magellan: Principal Venus science findings

This is a brief summary of the science findings of the Magellan mission, principally based on data from the radar system. Future plans for Magellan include acquisition of high resolution gravity data from a nearly circular orbit and atmospheric drag and occultation experiments. The Magellan science results represent the combined effort of more than 100 Magellan investigators and their students and colleagues. More extensive discussions can be found in the August and October, 1992 issues of the Journal of Geophysical Research, Planets. The Magellan mission's scientific objectives were to provide a global characterization of landforms and tectonic features; to distinguish and understand impact processes; to define and explain erosion, deposition, and chemical processes; and to model the interior density distribution. All but the last objective, which requires new global gravity data, have been accomplished, or we have acquired the data that are required to accomplish them.

Saunders, R. Stephen↗

Long-term variations in abundance and distribution of sulfuric acid vapor in the Venus atmosphere inferred from Pioneer Venus and Magellan radio occultation studies

Radio occultation experiments have been used to study various properties of planetary atmospheres, including pressure and temperature profiles, and the abundance profiles of absorbing constituents in those planetary atmospheres. However, the reduction of amplitude data from such experiments to determine abundance profiles requires the application of the inverse Abel transform (IAT) and numerical differentiation of experimental data. These two operations preferentially amplify measurement errors above the true signal underlying the data. A new technique for processing radio occultation data has been developed that greatly reduces the errors in the derived absorptivity and abundance profiles. This technique has been applied to datasets acquired from Pioneer Venus Orbiter radio occultation studies and more recently to experiments conducted with the Magellan spacecraft. While primarily designed for radar studies of the Venus surface, the high radiated power (EIRP) from the Magellan spacecraft makes it an ideal transmitter for measuring the refractivity and absorptivity of the Venus atmosphere by such experiments. The longevity of the Pioneer Venus Orbiter has made it possible to study long-term changes in the abundance and distribution of sulfuric acid vapor, H2SO4(g), in the Venus atmosphere between 1979 and 1992. The abundance of H2SO4(g) can be inferred from vertical profiles of 13-cm absorptivity profiles retrieved from radio occultation experiments. Data from 1979 and 1986-87 suggest that the abundance of H2SO4(g) at latitudes northward of 70 deg decreased over this time period. This change may be due to a period of active volcanism in the late 1970s followed by a relative quiescent period, or some other dynamic process in the Venus atmosphere. While the cause is not certain, such changes must be incorporated into dynamic models of the Venus atmosphere. Potentially, the Magellan spacecraft will extend the results of Pioneer Venus Orbiter and allow the continued monitoring of the abundance of distribution of H2SO4(g) in the Venus atmosphere, as well as other interesting atmospheric properties. Without such measurements it will be difficult to address other issues such as the short-term spatial variability of the abundance of H2SO4(g) at similar latitudes in Venus atmosphere, and the identities of particles responsible for large-scale variations observed in NIR images.

Jenkins, J. M.↗

Magellan at Venus: Summary of science findings

A brief summary of the principal science findings of the Magellan Mission and plans for future data acquisition are presented. This includes high resolution gravity data from a nearly circular orbit and atmospheric drag and occultation experiments.

Saunders, R. S.↗