Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Half-cell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Studying the Durability of Molybdenum Carbide Aerogel as an Electrocatalyst Support for Proton Exchange Membrane Fuel Cells

Carbon-supported platinum nanoparticles (Pt/C) are currently the state-of-the-art catalyst in proton exchange membrane fuel cells (PEMFCs). Unfortunately, the carbon support lacks the ability to stabilize the metal catalyst, as platinum tends to dissolve and agglomerate, significantly compromising the durability. Herein, we synthesized a ceramic material, molybdenum carbide aerogel (MCAG), and utilized it as a Pt support for PEMFCs, as an alternative for conventional carbon supports. N 2 adsorption and XRD analysis showed that the MCAG possesses a combination of high porosity and a well-defined ceramic crystalline structure. The Pt/MCAG system was studied for its electrocatalytic activity toward ORR in a half-cell and demonstrated satisfactory reaction kinetics and electrochemical active surface area, comparable to the commercial Pt/C. For durability examination, an accelerated stress test (AST) in a single cell was conducted with the Pt/MCAG catalyst at the cathode, following the U.S. DOE electrocatalyst AST protocol. Intermediate polarization curves and cyclic voltammograms were recorded over the course of the AST to monitor the aging process. The results indicated that the MCAG support exhibited superior durability in long-term fuel cell operation compared to a carbon support. The Pt/MCAG system demonstrated stable behavior during the progressive stages of the AST, retaining more than 50% of its initial performance by the end of the test, whereas carbon-supported Pt preserved only 30%.

25 ENERGY STORAGE↗
DOE OSTI2025

Performance-Limiting Factors of Hydrocarbon Ionomeric Binders for Fuel Cells and Electrolyzers

Here, the move toward nonfluorinated hydrocarbon ionomers for fuel cells and electrolyzers is driven by potential restrictions on polyfluoroalkyl substances such as Nafion. This study examines the key limitations of hydrocarbon ionomers through half- and single-cell experiments with model hydrocarbon ionomers. Half-cell tests reveal three major performance barriers: undesirable adsorption, electrochemical oxidation, and low gas permeability. Competitive sulfate adsorption helps counteract ionomer adsorption and oxidation. These findings align with single-cell performance data, which further reveal additional oxygen mass transport limitations likely caused by localized electrode flooding. Together, these findings offer valuable insights to guide the development of high-performance, fluorine-free hydrocarbon ionomers for next-generation fuel cells and electrolyzers.

Choi, Jong-Ho [Los Alamos National Laboratory (LAN↗
DOE OSTI2026

Improved Mechanical Adhesion Enabled by Bilayer Hole Transport Layers in Perovskite Solar Cells

We investigate buried-interface mechanical integrity in metal-halide perovskite half-cells using carbazole-based self-assembled monolayers (SAMs) and bilayer hole transport layers composed of metal oxide underlayers and SAMs. Combining macroscopic and microscopic characterization, we quantify interfacial fracture energy (Gc) and identify delamination pathways. SAM deposition on NiOx increases Gc by approximately 10-fold compared with ITO, highlighting the importance of oxide underlayer selection. To isolate the effect of removing noncovalently bonded SAM molecules, we use vapor-deposited perovskite as a solvent-free model system, decoupling the rinse step inherent to solution processing. Removing loosely bound SAM molecules increases Gc from 0.94 +- 0.08 J.m-2 to 4.82 +- 0.79 J.m-2. These results show that oxide selection and SAM binding quality are both critical for strengthening buried interfaces and designing mechanically robust perovskite solar cells.

14 SOLAR ENERGY↗
DOE OSTI2025

Stationary Oxygen Vacancy Construction toward a Superior-Performance Ultrahigh Nickel Single-Crystal Cathode

Oxygen vacancies exert a complex and profound influence on the layered cathodes, especially those with ultrahigh nickel content. They can facilitate lithium-ion transport and enhance electronic conductivity, while aggressive oxygen vacancy formation causes structural degradation and electrolyte decomposition. Herein, taking ultrahigh nickel single-crystal LiNi 0.92 Co 0.06 Mn 0.02 O 2 (SC-Ni92) as a model material, we propose a pinning strategy to harness the benefits of oxygen vacancies while mitigating their detrimental effects. Through a carefully controlled thermal process, both oxygen vacancies and pinning atoms are successfully introduced into the surface region. The resulting anchored oxygen vacancies, capitalizing on their inherent advantages, improve conductivity and lithium-ion diffusion. Simultaneously, the neighboring pinning atoms effectively increase the migration barrier and suppress the adverse effects of these vacancies, including electrolyte decomposition and structural degradation during long-term electrochemical cycling. Consequently, oxygen vacancy-anchored single-crystal LiNi 0.92 Co 0.06 Mn 0.02 O 2 (SC-Ni92-OV) demonstrates significantly improved high-voltage electrochemical performance, with 86.16% capacity retention after 200 cycles at 4.6 V and 1 C in a half-cell and 90.71% after 300 cycles at 4.5 V and 1 C in a full cell. Furthermore, this study not only provides valuable insights into the chemistry of oxygen vacancy but also introduces a viable strategy for leveraging oxygen vacancies to achieve stable high-voltage performance in ultrahigh nickel single-crystal cathodes.

defects in solids↗
DOE OSTI2025

Porous and Amorphous Mn x Mo 3 S 13 Chalcogel Electrode for High-Capacity Conversion-Based Lithium-Ion Batteries

While Li-ion batteries (LIBs) are a leading energy storage technology, their energy densities are limited by the low capacity of conventional intercalation cathodes, driving interest in high energy-density Li–S batteries that make use of conversion chemistry. Achieving high capacity, reversibility, and cycle stability, and controlling volume changes in conversion batteries during the charge–discharge process, however, remains challenging. Here, in this study, we present a porous, amorphous, sulfide-based Mn x Mo 3 S 13 chalcogel, which concurrently offers high capacity and cycle stability. The solution-processable room temperature synthesized Mn x Mo 3 S 13 (x = 0.25) chalcogel exhibits a local structure that resembles the Mo 3 S 13 cluster with Mn 2+ distributed across the Mo 3 S 13 matrix, as determined by synchrotron X-ray pair distribution function (PDF) and extended X-ray absorption fine structure (EXAFS). Ab initio molecular dynamics (AIMD) simulations reveal that Mn 2+ incorporation shortens the polysulfide chain in the gel matrix compared to the Mo 3 S 13 chalcogel, while forming a coordination environment with disulfide groups, analogous to the experimental findings. A Li/Mn 0.25 Mo 3 S 13 half-cell delivers 897 mAh g –1 capacity during the first discharge and retains 571 mAh g –1 capacity after 100 cycles at a C/3 rate. Distribution of relaxation time (DRT) unveils a stable solid–electrolyte interphase (SEI) formation upon cycling that enables charge–discharge reversibility. Here, the enhanced capacity retention and cycle stability compared to those of the Li/Mo 3 S 13 cell are attributed to the reduced dissolution of active mass into the electrolyte, facilitated by the formation of shorter polysulfide chains within the Mn 0.25 Mo 3 S 13 structure and the strong affinity of Lewis-acidic Mn 2+ for polysulfide anions generated during the charge–discharge process of the Li/Mn 0.25 Mo 3 S 13 cell. Thus, this work illustrates a design principle of material for high-capacity and cycle-stable Li-metal sulfide batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Strong Coupling of Iridium and Boron–Carbon-Nitride Support for Enhanced Acidic Water Oxidation

Supporting iridium (Ir)-based materials on stable and suitable substrates is an efficient strategy to improve their catalytic performance for the oxygen evolution reaction (OER) in harsh acidic environments. Herein, we report a series of Ir catalysts supported on boron–carbon-nitride (BCN), denoted as Ir/BCN. Detailed experiments combined with density functional theory calculations demonstrate strong interactions between Ir nanoparticles (NPs) and the BCN support, significantly contributing to the improved OER performance. Among the synthesized catalysts, the Ir/BCN-75 catalyst outperforms commercial Ir black and IrO 2 in both half-cell and proton exchange membrane water electrolysis (PEMWE) tests. Specially, the Ir/BCN-75 catalyst achieves a high current density of 2.94 A cm –2 at 1.9 V with a low Ir loading of 0.26 mg cm –2 in PEMWE measurements, exceeding most Ir-based catalysts reported to date. The BCN support interacts strongly with Ir, wherein Ir–N bonding directs the Ir NP growth and enhances electrocatalytic activity, while Ir–B bonding contributes to the stability of the Ir/BCN catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Operando X-ray absorption spectroscopic investigation of electrocatalysts state in anion exchange membrane fuel cells

Capturing the active state of (electro)catalysts under operating conditions, namely operando, is the ultimate objective of (electro)catalyst characterization, enabling the unraveling of reaction mechanisms and advancing (electro)catalyst development. Operando insights advance our understanding of the correlations between electrochemical tests and device-level performances. However, operando characterization of electrocatalysts is challenging due to the complexity of electrochemical devices and instrumental limitations. As a result, the majority of electrocatalyst characterizations have been limited to half-cell in situ studies. Here, we present an operando X-ray absorption spectroscopic study of Mn spinel oxide electrocatalysts in an operating fuel cell employing a custom-designed cell. Our results reveal that in anion exchange membrane fuel cells, the Mn valence state, within spinel Mn 3 O 4 /C, increases to above 3+, adopting an octahedral coordination devoid of Jahn-Teller distortions. This structural change results in an AEMFC performance equivalent to that of Co 1.5 Mn 1.5 O 4 /C, a composition that outperforms Mn 3 O 4 /C in rotating disk electrode tests. Our results underscore the importance of operando characterizations in elucidating the active state of electrocatalysts and understanding the correlation(s) between electrochemical tests and device performance.

Electrocatalysis↗
DOE OSTI2025

Investigating the effect of screen-printed structured graphite electrodes with low tortuosity for high-capacity and fast-charging lithium-ion batteries

A flexible screen-printed graphite electrode was fabricated as an anode for developing fast-charging lithium-ion batteries with low tortuosity. A homogenous anode ink was prepared by mixing graphite as the active material, carbon black (C45) as the conductive additive, and polyvinylidene fluoride (PVDF) as the binder in N-Methyl-2-pyrrolidone (NMP) solvent. The ink was deposited on a flexible copper foil via a stainless-steel screen consisting of an array of pores, that act as secondary pore networks (SPNs), using the screen-printing process. Lithium-ion battery half-cells were assembled using the printed graphite anode, lithium metal foil as the counter electrode, and 1.2 M lithium hexafluorophosphate (LiPF 6 ) in ethyl carbonate: ethyl methyl carbonate (EC: EMC = 3:7) as the electrolyte. The effect of SPNs on the cell performance was investigated by performing formation, rate and cycling tests on the assembled cells, at different C-rates. It was observed that the cells consisting of SPNs with a pore size of 100 μm and edge-to-edge distance of 100 μm between the pores exhibited significantly higher specific capacities of 168 and 129 mAh/g when compared to reference cells without SPNs, which had capacities of 120 and 85 mAh/g, at high C-rates of 4 C and 6 C, respectively. The cells with SPNs also demonstrated excellent cycling performance with ~ 95% capacity retention after 100 cycles at 2 C.

Fast charging lithium-ion battery↗
DOE OSTI2024

Voltage and temperature effects on low cobalt lithium-ion battery cathode degradation

Degradation of low cobalt lithium-ion cathodes was tested using a full factorial combination of upper cut-off voltage (4.0 V and 4.3 V vs. Li/Li + ) and operating temperature (25 °C and 60 °C). Half-cell batteries were analyzed with electrochemical and microstructural characterization methods. Electrochemical performance was assessed with galvanostatic cycling, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) supported by distribution of relaxation times (DRT) analysis. Electrode microstructure was characterized with scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray absorption near edge structure (XANES) imaging. Higher cut-off voltage cycling shows presence of NiO x formation, a low diffusivity rock-salt phase, in both CV and XRD data. XRD patterns confirmed that the rock-salt phase was beginning to form at the low cut-off voltage at high temperature, but in much lower intensity than at the high cut-off voltage. Higher temperature accelerates degradation processes at both voltages. Degradation factors at high temperature include NiO x formation, cathode material dissolution, and electrolyte decomposition. SEM analysis suggests that supporting phases may isolate and disconnect active material particles reducing capacity retention and battery life cycle. DRT analysis and XANES imaging show that both high temperature samples revealed a NiO x phase based on an increased diffusive impedance and a visible shift in the XANES spectra. The low cut-off voltage, high temperature sample showed a split peak and shift to lower energies indicating early formation of the NiO x phase. The diffusive impedance, which hinders intercalation and deintercalation, is driven by the formation of the NiO x phase. While primarily driven by cut-off voltage, elevated temperature also contributes to this degradation mechanism.

electrochemical impedance spectroscopy↗
DOE OSTI2025

Scalable mechanochemical synthesis of high-quality Prussian blue analogues for high-energy and durable potassium-ion batteries

Prussian blue analogues (PBAs) are recognized as promising cathode materials for potassium-ion batteries (PIBs), particularly the low-cost and high-energy K 2 Mn[Fe(CN) 6 ](KMnF). However, conventional solution-based synthesis inevitably introduces [Fe(CN) 6 ] 4− defects and lattice water while suffering low synthesis efficiency, unfavorable to the improvement of electrochemical performance and scalability. Here, in this work, we report a simple solvent-free mechanochemical strategy for the synthesis of a wide variety of K 2 M[Fe(CN) 6 ] (M = Mn, Mg, Ca, etc.) with negligible defects and water, and it is unprecedented to achieve kilogram-level products of high-quality KMnF within just 10 minutes. The as-prepared KMnF delivers a high energy density of 590 Wh kg −1 at 0.2 C and exhibits an astonishing stability over 10 000 cycles and rate ability up to 50 C in a potassium metal half-cell. Encouragingly, a high-areal-capacity pouch cell with 2.2 mAh cm −2 (16.5 mg cm −2 ) exhibits a capacity retention of 80.7% after 500 cycles. Furthermore, systematic in situ characterization reveals underlying mechanism insights into structure–performance relationships. Specifically, the fully coordinated Mn–N 6 octahedral configuration effectively suppresses Mn 3+ Jahn–Teller distortion, enabling reversible phase transitions under both high-voltage and long-term cycling conditions. In addition, minimal defects provide sufficient redox centers, while the continuous three-dimensional framework facilitates rapid K + diffusion kinetics. This work provides a new opportunity for the ultrafast, universal and scalable synthesis of high-quality PBAs, facilitating the practical application of PIBs while enabling precise structural and compositional design of novel PBAs.

Mechanochemical method↗
DOE OSTI2025

Understanding the Mn dissolution mechanism in rock salt-type Li 4 Mn 2 O 5 cathodes

For the first time, a detailed exploration of Mn dissolution in disordered rock salt (DRX) Li 4 Mn 2 O 5 is presented. Herein, we apply a suite of synchrotron and lab scale X-ray techniques to both the cathode and the separator harvested from pristine, charged, or cycled lithium half-cells containing the disordered rock salt (DRX) material Li 4 Mn 2 O 5 , in order to understand Mn dissolution processes throughout charging and discharging. Previous research has hypothesized two concurrent effects that may drive Mn dissolution in cells during cycling: acid-induced disproportionation of Jahn–Teller active Mn 3+ and structural rearrangement of the cathode lattice. Through depth probing of the Mn oxidation state in both the cathode and separator via soft X-ray absorption spectroscopy (XAS), hard XAS, and X-ray photoelectron spectroscopy (XPS) in progressive states-of-charge, as well as extended X-ray absorption fine structure (EXAFS) analysis of the local Mn environment, the primary driving force of Mn dissolution is determined to be high-voltage structural rearrangement above 4.2 V. Mn dissolution is, additionally, a main source of capacity fade in Li 4 Mn 2 O 5 DRX cells, which retain only 59% capacity after 20 cycles.

Theibault, Monica↗
DOE OSTI2026

In situ catalyst activation and regeneration enable energy-efficient high-current CO 2 reduction to ethanol-rich C 2+ mixtures

Electrochemical conversion of dissolved CO 2 in bicarbonate electrolytes, i.e., bicarbonate electrolysis, offers distinct advantages over gas diffusion electrode systems by enabling direct utilization of the CO 2 capture electrolyte while bypassing the energy-intensive CO 2 release step. However, bicarbonate electrolysis faces challenges such as CO 2 mass-transfer limitation, local pH-driven CO 2 depletion, and high cathodic potentials. The higher potential often causes catalyst surface reorganization, leading to a gradual loss of active sites and variations in selectivity during CO 2 reduction. Here, we report a directed, in situ activation and regeneration method that allows precatalysts to equilibrate under dynamic (pulsed) electrolysis conditions. We demonstrate in situ activation of a scalable Cu 2 O/Cu mesh that, under short-width (t = 4 s) pulsed electrolysis, provides stable mixed oxidation states of Cu, favoring the formation of an ethanol-rich crude mixture. The pulsed electrolysis waveform, consisting of six distinct segments, is tuned to form Cu + oxides, which are then reduced to generate local alkaline conditions favoring C–C coupling. This synergistic effect results in FEs of 73% for C2+ products and 39% for ethanol at an applied current density of −150 mA cm −2 and a cathodic potential of −1.45 V (vs. RHE). The overall half-cell energy efficiency is ∼30% for C 2+ products. The in situ Raman experiments confirm the role of pCO 2 R in dynamically regenerating Cu+-containing surface species during pulsed operation, thereby steering selectivity towards C 2+ products. A comprehensive multiscale, multiphysics model is developed to investigate the dynamic behavior of copper surface species (Cu, Cu + , and Cu 2+ ) and local microenvironmental conditions during the pCO 2 R. The results reveal that the coexistence of different copper oxidation states, especially the Cu+ intermediate, is critical in steering selectivity towards multicarbon (C 2+ ) products. The dynamic modulation of surface redox states via tailored pulsing strategies favors C–C coupling pathways by inducing localized alkaline conditions and stabilizing reactive intermediates. This work establishes a predictive modeling platform that links pulse waveform design with mechanistic insights into catalyst state evolution and product selectivity. Overall, this study provides valuable insights into the synergistic effect of in situ activation of pre-catalysts and pulsed electrolysis for higher selectivity towards C 2+ products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Role of microstructure on flux expulsion of superconducting radio frequency cavities

The trapped residual magnetic flux during the cool-down due to the incomplete Meissner state is a significant source of radio frequency losses in superconducting radio frequency cavities. Here, in this study, we clearly correlate the niobium microstructure in elliptical cavity geometry and flux expulsion behavior. In particular, a traditionally fabricated Nb cavity half-cell from an annealed poly-crystalline Nb sheet after an 800 °C heat treatment leads to a bi-modal microstructure that ties in with flux trapping and inefficient flux expulsion. This non-uniform microstructure is related to varying strain profiles along the cavity shape. A novel approach to prevent this non-uniform microstructure is presented by fabricating a 1.3 GHz single cell Nb cavity with a cold-worked sheet and subsequent heat treatment leading to better flux expulsion after 800 °C/3 h. Microstructural evolution by electron backscattered diffraction-orientation imaging microscopy on cavity cutouts, and flux pinning behavior by dc-magnetization on coupon samples confirms a reduction in flux pinning centers with increased heat treatment temperature. The heat treatment temperature-dependent mechanical properties and thermal conductivity are reported. The significant impact of cold work in this study demonstrates clear evidence for the importance of the microstructure required for high-performance superconducting cavities with reduced losses caused by magnetic flux trapping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Stabilizing Cathode–Electrolyte Interphase of Nickel-Rich Single-Crystal Cathodes for Lithium-Ion Batteries

Nickel-rich single-crystal (SC) layered oxides are promising cathode candidates for next-generation lithium-ion batteries (LIBs) owing to their high energy density and structural robustness against intergranular cracking. However, their intrinsic surface reactivity with liquid electrolytes accelerates parasitic reactions at the cathode–electrolyte interphase (CEI), leading to transition-metal dissolution, gas generation, and impedance buildup. In this work, we synthesized SC-Li x Ni 0.9 Mn 0.05 Co 0.05 O 2 (NMC9055, 1 ≤ x ≤ 1.2) using a eutectic-assisted method and investigated interface stabilization strategies. A nickel-deficient Li x Ni 0.6 Mn 0.2 Co 0.2 O 2 (NMC622, 1 ≤ x ≤ 1.2) coating was applied via evaporation-based deposition to suppress CEI degradation pathways. Structural and compositional analyses confirmed uniform shell formation and preserved particle integrity. Half-cell electrochemical testing against lithium metal revealed ∼10% higher capacity retention and improved reversibility compared with pristine SC NMC9055, particularly under high-voltage operation. In conclusion, these results highlight the critical role of controlled surface chemistry in mitigating CEI instability in nickel-rich SC cathodes, offering a pathway toward enabling durable high-energy LIBs.

Coating processes↗
DOE OSTI2025

Multiscale Modeling Framework for Lithium Nucleation in 3D Porous Carbon Anodes

Porous carbon scaffolds offer a promising route for mitigating non-uniform lithium (Li) plating to enhance the safety and longevity of Li metal batteries. However, the influence of microstructural morphology on Li nucleation is not well understood. Here, we present a multiscale modeling framework to investigate how the porous microstructure of carbon materials affects Li nucleation behavior. Ab initio molecular dynamics simulations quantify the nucleation energy barriers of Li on graphene as a function of Li content, surface curvature, and applied potential, providing key parameters for a classical nucleation theory (CNT) model. From macroscale half-cell simulations, we obtained Li concentration and electrical potential profiles to define boundary conditions for mesoscopic simulations. At the mesoscale, three distinct synthetic 3D microstructures with different porosities and characteristic feature sizes are generated to resolve local distributions of Li flux, current density, and mechanical stress. These outputs are integrated into the CNT model to map spatial variation in nucleation rates. Our findings reveal trade-offs between suppressing nucleation rates and achieving spatial uniformity, offering design guidelines for optimizing porous carbon anodes to balance nucleation control and mechanical integrity.

Materials science↗
DOE OSTI2025

Lithium-Ion Batteries with Lithium Manganese Iron Phosphate Cathodes and Lithium Titanate Anodes: Linking Electrode Dynamics to Cell Performance

This study examines the electrochemical performance, impedance behavior, and aging mechanisms of lithium-ion cells pairing lithium manganese iron phosphate (LiMn 0.6 Fe 0.4 PO 4 , LMFP64) cathodes with lithium titanate (Li 4 Ti 5 O 12 , LTO) anodes. LMFP64 half-cells display distinct Fe and Mn redox plateaus at ∼3.5 and ∼4.1 V, respectively, and deliver excellent rate capability. Three-electrode measurements show that LMFP64 dominates cell impedance, which changes sharply across the Fe–Mn redox transition and decreases with increasing temperature (30 °C–50 °C). Voltage hysteresis arises mainly from the cathode, with higher C-rates shortening redox plateaus and broadening the transition region. Elevated temperature lowers impedance, especially near the Mn-redox and transition regions, but accelerates capacity fade. Post-cycling analyses of electrodes confirm structural stability of LMFP64 and indicate loss of lithium inventory (LLI) as the source of capacity fade. This LLI causes potential slippage between the LMFP64 and LTO electrodes, which decreases the Fe-redox plateau width. Long-term cycling highlights the critical role of electrode overhang: cathode overhang mitigates capacity fade by buffering lithium loss, whereas anode overhang cells experience faster capacity decline due to uncompensated lithium depletion. These results clarify LMFP64/LTO battery impedance evolution, thermal effects, and degradation pathways and provide insights for their applications in electric vehicles.

Area Specific Impedance↗
DOE OSTI2026

Mathematical Modeling of the Potential and Time Dependence of Ir Dissolution from Hydrous Ir Oxide Oxygen Evolution Catalysts

One of the main degradation mechanisms of hydrous iridium oxide acidic oxygen evolution reaction (OER) catalysts is dissolution and loss into the acidic membrane. While degradation models have been proposed, there is a gap in understanding the potential and time dependence of the iridium dissolution reaction and its mechanistic underpinnings. In this work, Ir dissolution rates measured as a function of time and potential via time-resolved inductively-coupled plasma mass spectrometry (ICP-MS) in aqueous acidic electrolyte are used to establish a mathematical model for Ir dissolution. The mathematical model is generated using proposed formation and dissolution reactions for Ir species. Through comparison with the ICP-MS data and existing information on the potential-dependent Ir phase, we find that the potential and time-dependence of dissolution can be modeled as dissolution of an oxide phase, here represented as IrO 2 , with potential dependent kinetics and formation of a passivating species, a process with a rate-limiting step that is not potential dependent. This understanding of the potential dependence of dissolution and passivation kinetics using aqueous electrolyte half-cell measurements can be used to predict the degradation of Ir oxide in operating energy conversion devices relying on the OER, such as proton-exchange membrane water electrolyzers.

Kariuki, Nancy N. [Argonne National Laboratory (AN↗
DOE OSTI2026

Unveiling the Interplay: Cold Work, Recrystallization, and Flux Expulsion in SRF Cavities

The fabrication of SRF cavities from sheet materials includes deep-drawing, electron beam welding, chemical and mechanical polishing, high-temperature heat treatment, and material diffusion. The performance of these cavities is frequently limited by magnetic flux trapping giving rise to additional rf loss. In this presentation, we thoroughly examine how recrystallization influences flux expulsion in SRF cavities, using cold-worked niobium sheets from various suppliers. Our findings reveal that cold-worked sheets enhance flux expulsion, especially at lower heat treatment temperatures, by promoting improved recrystallization. In particular, a traditionally fabricated Nb cavity half-cell from an annealed poly-crystalline Nb sheet after an 800 C heat treatment leads to a bi-modal microstructure that ties in with flux trapping and inefficient flux expulsion. This non-uniform microstructure is related to varying strain profiles along the cavity shape. A novel approach to prevent this non-uniform microstructure is presented by fabricating a 1.3 GHz single cell Nb cavities with a cold-worked sheet and subsequent heat treatment leading to better flux expulsion after 800 C/3h

Dhakal, P. [Old Dominion Univ., Norfolk, VA (Unite↗