Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Half-cell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Hybrid Doping Strategy with High‐Entropy Cu/Fe Surface Modification and Zr Bulk Incorporation for Ni‐Rich Cathodes

A hybrid doping strategy combining Zr 4+ bulk doping with high-entropy Cu 2+ /Fe 3+ surface doping is developed to enhance the structural and interfacial stability of Ni-rich layered oxide cathodes. Cu and Fe are selectively introduced at the particle surface via a surface-selective ion-exchange process, forming a ≈15 nm Fe-rich layer while preserving the layered framework. Compared to the pristine cathode, the hybrid sample exhibits significantly improved electrochemical performance in both half-cell and full-cell configurations. In half-cells, the hybrid retains 88.5% and 90.2% after 100 cycles at 1C under 4.6 and 4.5 V, respectively. During high-voltage full-cell cycling, the hybrid cathode maintains over 80% capacity retention, whereas the pristine counterpart retains less than 10% under identical conditions over the same cycling period. XPS, EELS, and DEMS analyses confirm improved oxygen retention, suppressed gas evolution, and stable surface chemistry, while DFT calculations indicate enhanced Me–O bonding in the selected Fe 0.75 Cu 0.25 (Mn 1/16 Co 2/16 Ni 13/16 )O 2 surface composition, which is identified through DFT-calculated mixing energy reaching a minimum at this ratio, indicating the most thermodynamically favorable configuration. In conclusion, these results demonstrate the effectiveness of this hybrid doping strategy in mitigating coupled degradation pathways in Ni-rich cathodes.

15 GEOTHERMAL ENERGY↗
DOE OSTI2026

From Pyrolysis Oil to Advanced Biographite Anode: Unravelling Biocoke Structural Evolution and Delayed Coking Effects

Catalytic graphitization of biomass-derived carbon offers a promising route to produce biographite as a sustainable alternative to petroleum-based synthetic graphite for lithium-ion battery (LIB) anodes. This study investigates the physicochemical properties of biocokes produced from pyrolysis oil at carbonization temperatures ranging from 150 degrees C to 500 degrees C. Using an iron (Fe) catalyst, graphitization was performed at 1500 degrees C, significantly lower than the ~3000 degrees C required for conventional synthetic graphite. The effects of introducing an intermediate-temperature hold (400 degrees C-600 degrees C) prior to graphitization were evaluated, simulating a "delayed coking" process to enable the coproduction of sustainable aviation fuels (SAFs). Chemical structure evolution during biocoke formation was analyzed, and proposed mechanisms are presented. Biographites produced via the delayed coking pathway exhibited high crystallinity and excellent electrochemical performance in both half-cell and full-cell LIB configurations. The full cells exhibited an initial discharge capacity close to the theoretical capacity of the NMC622 cathode (175 mAh/g at 4.2 V), and high capacity retention (~88%) after 150 cycles. Notably, the graphitic and electrochemical properties remained stable across the range of intermediate hold temperatures. These findings provide a foundation for optimizing temperature parameters in delayed coking systems to enable scalable, integrated production of biographite and SAFs from pyrolysis oil.

09 BIOMASS FUELS↗
DOE OSTI2025

Breaking the Linear Scaling Relations for the Oxygen Reduction Reaction with a Dual‐Atom Catalyst Composed of a MnFe‐Porphyrrole Aerogel

Bimetallic catalysts offer enhanced catalytic performance through synergistic interactions between the two metals, allowing them to break the linear scaling relations and reach high electrocatalytic activity. This study presents bimetallic aerogel-based catalyst synthesized as a covalent, three-dimensional framework containing neighboring iron and manganese sites. The aerogel structure provides a high surface area and porosity, facilitating an ultra-high active site density and efficient mass transport. The MnFe porphyrrole's unique structure is obtained by alternately linking Mn-porphyrin and Fe-corrole complexes. It exhibited outstanding performance with an onset potential of 0.99 V RHE . Comparative studies with a free-base Fe porphyrrole catalyst (E onset 0.97 V RHE ) revealed that while Mn incorporation led to only a slight improvement in half-cell performance, it resulted in significantly enhanced performance in anion exchange membrane fuel cell. The MnFe catalyst achieved an OCV of 0.97 V and a peak power density of 0.27 W cm −2 , outperforming the free-base Fe counterpart. Using density functional theory calculations, we show that the higher ORR activity of MnFe-porphyrrole is due to charge transfer between Mn and Fe atoms, which is absent in the reference free-base Fe-porphyrrole. These findings underscore the advantages of bimetallic catalysts in improving ORR activity and fuel cell efficiency by leveraging synergistic effects.

Aerogel↗
DOE OSTI2026

An Organic Carboxylate Host for Stable Sodium Metal Batteries

Sodium metal batteries (SMBs) hold great promise for the development of high-energy, sustainable energy storage solutions, but their practical deployment is hampered by unstable solid electrolyte interphases, uncontrollable sodium dendrite growth, and low Coulombic efficiency (CE) during repeated Na plating/stripping cycles. To address these challenges, we introduce an organic interlayer, containing perylenetetracarboxylic dianhydride sodium salt (Na4PT), on the surface of Cu current collector. This interlayer forms a sodiophilic organic interphase that lowers the nucleation barriers for sodium deposition and guides the formation of the interphase through polar carbonyl/carboxylate sites and a π-conjugated organic framework. A dendrite-free sodium metal anode is achieved using Na4PT coated Cu current collector. Under capacity-limited Na plating/stripping, Na||Na4PT@Cu half-cells deliver reversible capacities of 500 and 1,000 mAh g−1 at 0.1 and 1 A g−1 for 500 cycles with average CE above 99%. Post-cycling scanning electron microscopy and X-ray photoelectron spectroscopy measurements confirm that Na4PT@Cu promotes compact and uniform Na deposits and supports the formation of a stable interphase with reduced parasitic decomposition, directly correlating interfacial chemistry/morphology with high plating/stripping reversibility. These results highlight organic carboxylate coating as a practical interface engineering strategy for dendrite-free SMBs.

Chen, Chengxiang [University of Miami]↗
DOE OSTI2026

Unraveling Fundamental Activity–Stability Relationships in Rutile Oxides

The oxygen evolution reaction (OER) is a key anodic half-cell reaction that accompanies several critical electrochemical reduction reactions of interest to a variety of applications. Despite steady advances in understanding and qualitatively predicting OER activity and selectivity trends, a comprehensive description or prediction of material aqueous (in)stability and degradation mechanisms remains elusive, even though these processes critically influence device lifetime and economic feasibility. In this work, we investigate the interplay, or lack thereof, between OER activity and material aqueous stability across rutile oxides, with a particular focus on iridium oxide (IrO 2 ). By applying a Born–Haber cycle, we calculate the thermodynamic driving force for metal dissolution as a function of the applied bias and electrolyte conditions. We apply interpretable machine learning techniques, including principal component analysis and symbolic regression, to analyze trends across rutile oxides and find that key thermodynamic descriptors for OER activity and surface stability are only very weakly correlated. Instead, the local atomic environment─especially electronic structure signatures for interactions between the active site and its neighbors─plays a more important role in predicting material stability. Leveraging these insights, we investigate the impact of doping IrO 2 with a range of transition metals and show that the stability of Ir active sites can be tuned largely independently of its predicted OER activity. These insights lay the foundation for material design to improve stability with respect to corrosion, with the ultimate aim to enhance long-term stability without sacrificing catalytic performance in the OER.

evolution reactions↗
DOE OSTI2026

Understanding Inlet Concentration Effects on the Electrocatalytic Conversion of CO 2 to Formic Acid in Gas-Fed Electrolyzers

The electrochemical CO 2 reduction reaction (CO2RR) to produce value-added products remains a developing technology for utilizing waste CO 2 streams. Most device-level CO2RR studies use pure CO 2 gas feeds; however, the effect of dilute CO 2 on the electrolyzer performance is an important consideration for large-scale electrolyzer operation, single-pass conversion, and real-world CO 2 source utilization. This work investigates the effect that the CO 2 concentration has on the performance of formic acid (HCOOH) producing tin oxide (SnO 2 ) and bismuth oxide (Bi 2 O 3 ) catalysts in an electrolyzer device setting. Surprisingly, SnO2 demonstrated an approximately 20% increase in HCOOH selectivity (Faradaic efficiency) when the CO 2 concentration decreased from 100 to 20%. In contrast, Bi 2 O 3 consistently demonstrated high selectivity toward HCOOH across the same CO 2 concentration range. The effects of the CO 2 concentration on selectivity were further investigated with half-cell experiments and in situ Raman spectroscopy, which revealed dynamic changes in the cathodic overpotential and chemical state of the catalyst that depended on the CO 2 concentration. Density functional theory calculations showed how changes in the surface oxidation state of Sn, varying from fully oxidized SnO 2 to metallic Sn(0), affect the thermodynamic barriers of the three main observed products: HCOOH, CO, and H 2 . Our results indicate that dilute CO 2 concentrations required larger cathodic overpotentials to sustain a fixed current density, which, in turn, pushed the Sn-based catalyst toward a more reduced surface that was favorable to HCOOH formation. On the other hand, the Bi-based catalyst remained in a metallic state at CO2RR-relevant potentials and demonstrated a consistent product selectivity regardless of CO 2 concentration. These findings highlight how varying the CO 2 inlet gas concentrations affects the chemical state of catalysts and the resulting performance metrics.

42 ENGINEERING↗
DOE OSTI2026

Oxygen Vacancy Evolution at Li x V 2 O 5 /LiPON Solid State Electrochemical Interfaces Using Depth Resolved Cathodoluminescence Spectroscopy

The formation of oxygen vacancies at buried LiPON/ Li x V 2 O 5 interfaces has been observed on a near-nanometer scale and nondestructively using depth-resolved cathodoluminescence spectroscopy (DRCLS) and interfacial markers. Before electrochemical cycling, as-deposited LiPON/Li x V 2 O 5 exhibits a 1.6 eV defect optical emission, which density functional theory calculations identify as originating from oxygen vacancies. This defect appears first within a few nanometers of the buried LiPON/Li x V 2 O 5 interface without cycling, indicating that spontaneous O diffusion from the Li x V 2 O 5 lattice into LiPON may have caused these interface-localized oxygen vacancy defects. DRCLS measured the intensity and spatial distribution of this oxygen vacancy signal as a function of electrochemical cycling in a LiPON/Li x V 2 O 5 half-cell, showing oxygen vacancy signal increasing and moving deeper into the electrode with increased cycle number. Significant electrochemical irreversibility was also observed, with poor Coulombic efficiency and a 15% drop in capacity over 50 cycles. Theoretical simulations predict that the presence of oxygen vacancies increases the energy barrier for lithium diffusion significantly, indicating that this aggregation of oxygen vacancies could be another battery degradation mechanism accompanying lithiation induced phase changes.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Improved Mechanical Adhesion Enabled by Bilayer Hole Transport Layers in Perovskite Solar Cells

We investigate buried-interface mechanical integrity in metal-halide perovskite half-cells using carbazole-based self-assembled monolayers (SAMs) and bilayer hole transport layers composed of metal oxide underlayers and SAMs. Combining macroscopic and microscopic characterization, we quantify interfacial fracture energy (Gc) and identify delamination pathways. SAM deposition on NiOx increases Gc by approximately 10-fold compared with ITO, highlighting the importance of oxide underlayer selection. To isolate the effect of removing noncovalently bonded SAM molecules, we use vapor-deposited perovskite as a solvent-free model system, decoupling the rinse step inherent to solution processing. Removing loosely bound SAM molecules increases Gc from 0.94 +- 0.08 J.m-2 to 4.82 +- 0.79 J.m-2. These results show that oxide selection and SAM binding quality are both critical for strengthening buried interfaces and designing mechanically robust perovskite solar cells.

14 SOLAR ENERGY↗
DOE OSTI2025

Strong Coupling of Iridium and Boron–Carbon-Nitride Support for Enhanced Acidic Water Oxidation

Supporting iridium (Ir)-based materials on stable and suitable substrates is an efficient strategy to improve their catalytic performance for the oxygen evolution reaction (OER) in harsh acidic environments. Herein, we report a series of Ir catalysts supported on boron–carbon-nitride (BCN), denoted as Ir/BCN. Detailed experiments combined with density functional theory calculations demonstrate strong interactions between Ir nanoparticles (NPs) and the BCN support, significantly contributing to the improved OER performance. Among the synthesized catalysts, the Ir/BCN-75 catalyst outperforms commercial Ir black and IrO 2 in both half-cell and proton exchange membrane water electrolysis (PEMWE) tests. Specially, the Ir/BCN-75 catalyst achieves a high current density of 2.94 A cm –2 at 1.9 V with a low Ir loading of 0.26 mg cm –2 in PEMWE measurements, exceeding most Ir-based catalysts reported to date. The BCN support interacts strongly with Ir, wherein Ir–N bonding directs the Ir NP growth and enhances electrocatalytic activity, while Ir–B bonding contributes to the stability of the Ir/BCN catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Investigating the effect of screen-printed structured graphite electrodes with low tortuosity for high-capacity and fast-charging lithium-ion batteries

A flexible screen-printed graphite electrode was fabricated as an anode for developing fast-charging lithium-ion batteries with low tortuosity. A homogenous anode ink was prepared by mixing graphite as the active material, carbon black (C45) as the conductive additive, and polyvinylidene fluoride (PVDF) as the binder in N-Methyl-2-pyrrolidone (NMP) solvent. The ink was deposited on a flexible copper foil via a stainless-steel screen consisting of an array of pores, that act as secondary pore networks (SPNs), using the screen-printing process. Lithium-ion battery half-cells were assembled using the printed graphite anode, lithium metal foil as the counter electrode, and 1.2 M lithium hexafluorophosphate (LiPF 6 ) in ethyl carbonate: ethyl methyl carbonate (EC: EMC = 3:7) as the electrolyte. The effect of SPNs on the cell performance was investigated by performing formation, rate and cycling tests on the assembled cells, at different C-rates. It was observed that the cells consisting of SPNs with a pore size of 100 μm and edge-to-edge distance of 100 μm between the pores exhibited significantly higher specific capacities of 168 and 129 mAh/g when compared to reference cells without SPNs, which had capacities of 120 and 85 mAh/g, at high C-rates of 4 C and 6 C, respectively. The cells with SPNs also demonstrated excellent cycling performance with ~ 95% capacity retention after 100 cycles at 2 C.

Fast charging lithium-ion battery↗
DOE OSTI2026

In situ catalyst activation and regeneration enable energy-efficient high-current CO 2 reduction to ethanol-rich C 2+ mixtures

Electrochemical conversion of dissolved CO 2 in bicarbonate electrolytes, i.e., bicarbonate electrolysis, offers distinct advantages over gas diffusion electrode systems by enabling direct utilization of the CO 2 capture electrolyte while bypassing the energy-intensive CO 2 release step. However, bicarbonate electrolysis faces challenges such as CO 2 mass-transfer limitation, local pH-driven CO 2 depletion, and high cathodic potentials. The higher potential often causes catalyst surface reorganization, leading to a gradual loss of active sites and variations in selectivity during CO 2 reduction. Here, we report a directed, in situ activation and regeneration method that allows precatalysts to equilibrate under dynamic (pulsed) electrolysis conditions. We demonstrate in situ activation of a scalable Cu 2 O/Cu mesh that, under short-width (t = 4 s) pulsed electrolysis, provides stable mixed oxidation states of Cu, favoring the formation of an ethanol-rich crude mixture. The pulsed electrolysis waveform, consisting of six distinct segments, is tuned to form Cu + oxides, which are then reduced to generate local alkaline conditions favoring C–C coupling. This synergistic effect results in FEs of 73% for C2+ products and 39% for ethanol at an applied current density of −150 mA cm −2 and a cathodic potential of −1.45 V (vs. RHE). The overall half-cell energy efficiency is ∼30% for C 2+ products. The in situ Raman experiments confirm the role of pCO 2 R in dynamically regenerating Cu+-containing surface species during pulsed operation, thereby steering selectivity towards C 2+ products. A comprehensive multiscale, multiphysics model is developed to investigate the dynamic behavior of copper surface species (Cu, Cu + , and Cu 2+ ) and local microenvironmental conditions during the pCO 2 R. The results reveal that the coexistence of different copper oxidation states, especially the Cu+ intermediate, is critical in steering selectivity towards multicarbon (C 2+ ) products. The dynamic modulation of surface redox states via tailored pulsing strategies favors C–C coupling pathways by inducing localized alkaline conditions and stabilizing reactive intermediates. This work establishes a predictive modeling platform that links pulse waveform design with mechanistic insights into catalyst state evolution and product selectivity. Overall, this study provides valuable insights into the synergistic effect of in situ activation of pre-catalysts and pulsed electrolysis for higher selectivity towards C 2+ products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Stabilizing Cathode–Electrolyte Interphase of Nickel-Rich Single-Crystal Cathodes for Lithium-Ion Batteries

Nickel-rich single-crystal (SC) layered oxides are promising cathode candidates for next-generation lithium-ion batteries (LIBs) owing to their high energy density and structural robustness against intergranular cracking. However, their intrinsic surface reactivity with liquid electrolytes accelerates parasitic reactions at the cathode–electrolyte interphase (CEI), leading to transition-metal dissolution, gas generation, and impedance buildup. In this work, we synthesized SC-Li x Ni 0.9 Mn 0.05 Co 0.05 O 2 (NMC9055, 1 ≤ x ≤ 1.2) using a eutectic-assisted method and investigated interface stabilization strategies. A nickel-deficient Li x Ni 0.6 Mn 0.2 Co 0.2 O 2 (NMC622, 1 ≤ x ≤ 1.2) coating was applied via evaporation-based deposition to suppress CEI degradation pathways. Structural and compositional analyses confirmed uniform shell formation and preserved particle integrity. Half-cell electrochemical testing against lithium metal revealed ∼10% higher capacity retention and improved reversibility compared with pristine SC NMC9055, particularly under high-voltage operation. In conclusion, these results highlight the critical role of controlled surface chemistry in mitigating CEI instability in nickel-rich SC cathodes, offering a pathway toward enabling durable high-energy LIBs.

Coating processes↗
DOE OSTI2025

Multiscale Modeling Framework for Lithium Nucleation in 3D Porous Carbon Anodes

Porous carbon scaffolds offer a promising route for mitigating non-uniform lithium (Li) plating to enhance the safety and longevity of Li metal batteries. However, the influence of microstructural morphology on Li nucleation is not well understood. Here, we present a multiscale modeling framework to investigate how the porous microstructure of carbon materials affects Li nucleation behavior. Ab initio molecular dynamics simulations quantify the nucleation energy barriers of Li on graphene as a function of Li content, surface curvature, and applied potential, providing key parameters for a classical nucleation theory (CNT) model. From macroscale half-cell simulations, we obtained Li concentration and electrical potential profiles to define boundary conditions for mesoscopic simulations. At the mesoscale, three distinct synthetic 3D microstructures with different porosities and characteristic feature sizes are generated to resolve local distributions of Li flux, current density, and mechanical stress. These outputs are integrated into the CNT model to map spatial variation in nucleation rates. Our findings reveal trade-offs between suppressing nucleation rates and achieving spatial uniformity, offering design guidelines for optimizing porous carbon anodes to balance nucleation control and mechanical integrity.

Materials science↗
DOE OSTI2025

Lithium-Ion Batteries with Lithium Manganese Iron Phosphate Cathodes and Lithium Titanate Anodes: Linking Electrode Dynamics to Cell Performance

This study examines the electrochemical performance, impedance behavior, and aging mechanisms of lithium-ion cells pairing lithium manganese iron phosphate (LiMn 0.6 Fe 0.4 PO 4 , LMFP64) cathodes with lithium titanate (Li 4 Ti 5 O 12 , LTO) anodes. LMFP64 half-cells display distinct Fe and Mn redox plateaus at ∼3.5 and ∼4.1 V, respectively, and deliver excellent rate capability. Three-electrode measurements show that LMFP64 dominates cell impedance, which changes sharply across the Fe–Mn redox transition and decreases with increasing temperature (30 °C–50 °C). Voltage hysteresis arises mainly from the cathode, with higher C-rates shortening redox plateaus and broadening the transition region. Elevated temperature lowers impedance, especially near the Mn-redox and transition regions, but accelerates capacity fade. Post-cycling analyses of electrodes confirm structural stability of LMFP64 and indicate loss of lithium inventory (LLI) as the source of capacity fade. This LLI causes potential slippage between the LMFP64 and LTO electrodes, which decreases the Fe-redox plateau width. Long-term cycling highlights the critical role of electrode overhang: cathode overhang mitigates capacity fade by buffering lithium loss, whereas anode overhang cells experience faster capacity decline due to uncompensated lithium depletion. These results clarify LMFP64/LTO battery impedance evolution, thermal effects, and degradation pathways and provide insights for their applications in electric vehicles.

Area Specific Impedance↗
DOE OSTI2026

Mathematical Modeling of the Potential and Time Dependence of Ir Dissolution from Hydrous Ir Oxide Oxygen Evolution Catalysts

One of the main degradation mechanisms of hydrous iridium oxide acidic oxygen evolution reaction (OER) catalysts is dissolution and loss into the acidic membrane. While degradation models have been proposed, there is a gap in understanding the potential and time dependence of the iridium dissolution reaction and its mechanistic underpinnings. In this work, Ir dissolution rates measured as a function of time and potential via time-resolved inductively-coupled plasma mass spectrometry (ICP-MS) in aqueous acidic electrolyte are used to establish a mathematical model for Ir dissolution. The mathematical model is generated using proposed formation and dissolution reactions for Ir species. Through comparison with the ICP-MS data and existing information on the potential-dependent Ir phase, we find that the potential and time-dependence of dissolution can be modeled as dissolution of an oxide phase, here represented as IrO 2 , with potential dependent kinetics and formation of a passivating species, a process with a rate-limiting step that is not potential dependent. This understanding of the potential dependence of dissolution and passivation kinetics using aqueous electrolyte half-cell measurements can be used to predict the degradation of Ir oxide in operating energy conversion devices relying on the OER, such as proton-exchange membrane water electrolyzers.

Kariuki, Nancy N. [Argonne National Laboratory (AN↗
DOE OSTI2026

Unveiling the Interplay: Cold Work, Recrystallization, and Flux Expulsion in SRF Cavities

The fabrication of SRF cavities from sheet materials includes deep-drawing, electron beam welding, chemical and mechanical polishing, high-temperature heat treatment, and material diffusion. The performance of these cavities is frequently limited by magnetic flux trapping giving rise to additional rf loss. In this presentation, we thoroughly examine how recrystallization influences flux expulsion in SRF cavities, using cold-worked niobium sheets from various suppliers. Our findings reveal that cold-worked sheets enhance flux expulsion, especially at lower heat treatment temperatures, by promoting improved recrystallization. In particular, a traditionally fabricated Nb cavity half-cell from an annealed poly-crystalline Nb sheet after an 800 C heat treatment leads to a bi-modal microstructure that ties in with flux trapping and inefficient flux expulsion. This non-uniform microstructure is related to varying strain profiles along the cavity shape. A novel approach to prevent this non-uniform microstructure is presented by fabricating a 1.3 GHz single cell Nb cavities with a cold-worked sheet and subsequent heat treatment leading to better flux expulsion after 800 C/3h

Dhakal, P. [Old Dominion Univ., Norfolk, VA (Unite↗
DOE OSTI2025

Advanced Processing of Coal and Coal Waste to Produce Graphite for Fast-Charging Lithium-Ion Battery Anode

The University of North Dakota (UND) Energy & Environmental Research Center (EERC), in collaboration with the UND Center for Process Engineering Research (CPER), conducted a project to validate two technologies capable of converting North Dakota lignite and lignite coal waste to high-quality graphite for fast-charging lithium-ion battery (LIB) anode. The project was conducted over about 3 years from April 7, 2022, to July 6, 2025. The two technological paths pursued in this project include path A – direct conversion of coal or coal waste to graphite by the upgraded carbon ores to products (UCOP) process being developed at the EERC and path B – lignite-derived coal tar pitch (CTP) conversion to graphite (CTP2G) process being developed at CPER. The results from this project validate the two technological approaches and are expected to be an integral part of a portfolio of emerging technologies for making high-quality graphite not only from North Dakota lignite, but from all ranks of U.S. domestic coal and coal waste resources. The quality of the graphite produced by these technologies is high enough for various applications, including batteries for the fast-growing electric vehicle industry, energy storage applications, electric arc furnace electrodes for steel production, and graphene production, among others. Although the two technologies can produce high-quality graphite, they are fundamentally different in that the UCOP technology provides a direct path to transform coal to graphite, while the CTP2G technology needs to go through a CTP intermediate and a coking process for the intermediate, which requires a special facility to accomplish. For application in the industry, the UCOP process is designed to be more flexible, with feedstock to include potentially any carbonaceous material such as all coal ranks and biochar, while the CTP2G process is designed to utilize CTP as the starting precursor. The key project accomplishments include the following: • Successful preparation of high-quality synthetic graphite from North Dakota lignite coal/coal wastes and lignite-derived CTP. • Patent application has been filed for the UCOP process and an internal invention disclosure has been filed for the CTP2G process. • The produced graphite performs better than a commercial battery-grade sample in LIB coin cells, especially fast-charging capability, stability, and long-duration cycling. • Coin-type Li-ion half-cells with CTP2G graphite showed excellent performance, with >370 mAh/g capacity, >90% initial coulombic efficiency, and 93%/67% retention at 1C/2C rate, which outperforms commercial graphite in charging speed, stability, and cycling. • Results of fabricated 18650 cells were consistent with the observations in coin cells. • Preliminary techno-economic analysis (TEA) estimates for the UCOP technology indicate a manufacturing cost of about $\$$39/kg based on 50-metric ton/year capacity. • Preliminary TEA estimates for the CTP2G technology indicate a market price of about $\$$7107/ton ($\$$7/kg) based on 22,000-ton/year production capacity.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Lower Cost Renewable Nanoparticle Platform to Increases Production of Cathode Material (CRADA Final Report)

Employees of Sylvatex synthesized candidate cathode materials for lithium-ion batteries in PI’s labs and at the Molecular Foundry using sustainable methods. They then benchmarked the synthesized materials against available commercial cathode materials in lithium half-cells (coin cell configurations) to compare performance and ensure that their materials met or exceeded metrics of the commercial materials.

36 MATERIALS SCIENCE↗