Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FSC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

The search for brown dwarfs with infrared surveys

Infrared Astronomy Satellite (IRAS), ISO, Space Infrared Telescope Facility (SIRTF), WIRE, Deep Near-Infrared Survey (DENIS), and Two Micron All-Sky Survey (2MASS) observations were used to compute the maximum number of observable brown dwarfs for various infrared surveys by combining the maximum possible Oort limit (0.1 'missing' solar mass p/cu c) with all possible brown dwarf mass and age distributions. This approach shows what limits will be placed on the contribution of brown dwarfs to any possible 'missing mass' if no brown dwarfs are observed. I consider brown dwarfs with masses of 0.01-0.08 solar mass and ages of 10(exp 9)-10(exp 10) years. The full range of predicted numbers of brown dwarfs above approx. 6 times the noise of each of the below surveys is: IRAS Point Source Catalog, 0.02-6; IRAS Faint Source Catalog absolute value of b greater than 10 deg, 0.05-16; ISO (2 week 12 micrometer survey), 0.15-80; SIRTF (2 week 12 micrometer survey), 2.50-1600; WIRE (4 month 12 micrometer survey), 21.80-6000; DENIS(half sky) absolute value of b greater than 10 deg, 0.00-2000; and 2MASS(full sky) absolute value of b greater than 10 deg, 0.00-8800. A failure to find brown dwarfs in the IRAS FSC would just barely rule out about half of the mass-age range for Oort limit total masses. A failure to find brown dwarfs in 2MASS/DENIS would rule out roughly the same mass-age range, but would set a limit of 0.1-0.01 times the Oort mass in that mass-age region. No limits would be set for the other half of the mass-age range since both IRAS and 2MASS/DENIS have insufficient sensitivity for brown dwarfs with T less than 750 K. A failure to find brown dwarfs with ISO would rule out almost all of the mass-age range for Oort limit total masses, but would not set a significantly lower limit to the brown dwarf mass limit. A failure to find brown dwarfs with SIRTF or WIRE would rule out the entire mass-age range for Oort limit total masses and set an upper limit of 0.1-0.001 times the Oort mass. To date, about 18% of the IRAS FSC has been searched down to 6 sigma, and no brown dwarfs have been found. This sets a 95% upper limit of 3 in 18% of the sky, or 13 in the entire FSC for absolute value b greater than 10 deg. To begin to set useful limits from 2MASS or DENIS, approximately 400 square degrees needs to be analyzed. To date, only a few square degrees of results from the 2MASS prototype camera have been examined, with no brown dwarfs found so far.

Chester, T. J.↗
NASA NTRS2012

View Angle Effects on MODIS Snow Mapping in Forests

Binary snow maps and fractional snow cover data are provided routinely from MODIS (Moderate Resolution Imaging Spectroradiometer). This paper investigates how the wide observation angles of MODIS influence the current snow mapping algorithm in forested areas. Theoretical modeling results indicate that large view zenith angles (VZA) can lead to underestimation of fractional snow cover (FSC) by reducing the amount of the ground surface that is viewable through forest canopies, and by increasing uncertainties during the gridding of MODIS data. At the end of the MODIS scan line, the total modeled error can be as much as 50% for FSC. Empirical analysis of MODIS/Terra snow products in four forest sites shows high fluctuation in FSC estimates on consecutive days. In addition, the normalized difference snow index (NDSI) values, which are the primary input to the MODIS snow mapping algorithms, decrease as VZA increases at the site level. At the pixel level, NDSI values have higher variances, and are correlated with the normalized difference vegetation index (NDVI) in snow covered forests. These findings are consistent with our modeled results, and imply that consideration of view angle effects could improve MODIS snow monitoring in forested areas.

MODIS↗
DOE OSTI2026

A framework and calculator for evaluating the impacts of shelf life extension and other food loss and waste reduction technologies

Optimization of the food supply chain (FSC) depends on reducing food waste, especially at the consumer stage, where a substantial portion of food is not eaten, but instead disposed of via landfill, incineration, or in-sink disposals. One key strategy is to increase the time that consumers have before food goes bad or expires. This study developed a framework to assess the efficacy of shelf-life extension (SLE) technologies for mitigating food loss and waste (FLW), such as packaging improvements. The impact flows through the entire FSC, reducing FLW, energy use, and other inputs at each stage. The framework and resulting calculator can be used to evaluate the impact of FLW reduction at any stage for any food commodity. As shown by two SLE cases, the calculator is valuable for policy-makers, government entities, and professionals, specifically those in marketing, business development, and capital projects teams, to comprehensively evaluate the impacts of FLW reduction technologies and practices. The framework and calculator are sensitive to the shape of the consumption curve, the fraction of inedible waste, and the current shelf life. The calculator was used to assess the impacts of the United States goal of reducing food waste by consumers through various SLE lengths. It was found that uptake of several near-ready-to-deploy SLE technologies would reduce annual food production demand by about 10–19 MMT and supply chain energy consumption by 240–410 PJ in the United States.

Food loss and waste (FLW)↗
DOE OSTI2025

Investigating Fast Scanning Calorimetry and Differential Scanning Calorimetry as Screening Tools for Thermoset Polymer Material Compatibility with Laser-Based Powder Bed Fusion

As additive manufacturing (AM) technology has developed and progressed, a constant topic of research in the area is expanding the library of materials to be used with these techniques. Among AM methods that utilize polymers, laser-based powder bed fusion (PBF-LB) has preferentially used thermoplastic polymers as its starting materials, but the deposition and material joining method employed in PBF-LB may also be compatible with powdered thermoset polymer precursors as feedstocks. To assess the compatibility of candidate thermosetting polymers and PBF-LB, characterization techniques and protocols that link fundamental material behavior to material behavior in the processing environment are needed. Therefore, the objectives of this work are to compare the curing behavior measured with two different calorimetry techniques that can operate in different heating rate regimes, differential scanning calorimetry (DSC) and fast scanning calorimetry (FSC), and to assess the capabilities of these techniques to act as materials screening tools for PBF-LB. A commercial polyester powder coating is used as a model material to evaluate the potential of obtaining complimentary information for material screening through a combination of calorimetry methods, and its non-isothermal curing behavior is measured at heating rates between 5 °C/min and 7500 °C/min. Curing exotherms are observed with both calorimetry techniques, and comparing the enthalpy associated with curing shows that incomplete curing occurs at higher heating rates, with relative conversion values of approximately 30%. The curing data are fit with two isoconversional models, Friedman and Starink, which show a reduced activation energy at higher heating rates as well, signifying a lower barrier to curing at the conditions used in the FSC experiments. Overall, the results of this work indicate that using these two calorimetry techniques as tiered screening tools can provide valuable information about how curing may proceed in PBF-LB and inform materials selection and design activities for additive manufacturing.

36 MATERIALS SCIENCE↗
NASA NTRS1993

The extended 12 micron galaxy sample

We have selected an all-sky (absolute value of b greater than or equal to 25 deg) 12 micron flux-limited sample of 893 galaxies from the IRAS Faint Source Catalog, Version 2 (FSC-2). We have obtained accurate total fluxes in the IRAS wavebands by using the ADDSCAN procedure for all objects with FSC-2 12 micron fluxes greater than 0.15 Jy and increasing flux densities from 12 to 60 microns, and defined the sample by imposing a survey limit of 0.22 Jy on the total 12 micron flux. Its completeness is verified, by means of the classical log N - log S and V/V(sub max) tests, down to 0.30 Jy, below which we have measured the incompleteness down to the survey limit, using the log N - log S plot, for our statistical analysis. We have obtained redshifts (mostly from catalogs) for virtually all (98.4%) the galaxies in the sample. Using existing catalogs of active galaxies, we defined a subsample of 118 objects consisting of 53 Seyfert 1s and quasars, 63 Seyfert 2s, and two blazars (approximately 13% of the full sample), which is the largest unbiased sample of Seyfert galaxies ever assembled. Since the 12 micron flux has been shown to be about one-fifth of the bolometric flux for Seyfert galaxies and quasars, the subsample of Seyferts (including quasars and blazars) is complete not only to 0.30 Jy at 12 microns but also with respect to a bolometric flux limit of approximately 2.0 x 10(exp -10) ergs/s/sq cm. The average value of V/V(sub max) for the full sample, corrected for incompleteness at low fluxes, is 0.51 +/- 0.04, expected for a complete sample of uniformly distributed galaxies, while the value for the Seyfert galaxy subsample is 0.46 +/- 0.10. We have derived 12 microns and far-infrared luminosity functions for the AGNs, as well as for the entire sample. We extracted from our sample a complete subsample of 235 galaxies flux-limited (8.3 Jy) at 60 microns. The 60 micron luminosity function computed for this subsample is in satisfactory agreement with the ones derived from the bright galaxy sample (BGS) and the deep high-galactic latitude sample, both selected at 60 microns.

Rush, Brian↗
DOE OSTI2024

A generalized Selberg zeta function for flat space cosmologies

Flat space cosmologies (FSCs) are time dependent solutions of three-dimensional (3D) gravity with a vanishing cosmological constant. They can be constructed from a discrete quotient of empty 3D flat spacetime and are also called shifted-boost orbifolds. Using this quotient structure, we build a new and generalized Selberg zeta function for FSCs, and show that it is directly related to the scalar 1-loop partition function. We then propose an extension of this formalism applicable to more general quotient manifolds $\mathcal{M}$/ℤ, based on representation theory of fields propagating on this background. Our prescription constitutes a novel and expedient method for calculating regularized 1-loop determinants, without resorting to the heat kernel. We compute quasinormal modes in the FSC using the zeroes of a Selberg zeta function, and match them to known results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Non-averaged single-molecule tertiary structures reveal RNA self-folding through individual-particle cryo-electron tomography

Large-scale and continuous conformational changes in the RNA self-folding process present significant challenges for structural studies, often requiring trade-offs between resolution and observational scope. Here, we utilize individual-particle cryo-electron tomography (IPET) to examine the post-transcriptional self-folding process of designed RNA origami 6-helix bundle with a clasp helix (6HBC). By avoiding selection, classification, averaging, or chemical fixation and optimizing cryo-ET data acquisition parameters, we reconstruct 120 three-dimensional (3D) density maps from 120 individual particles at an electron dose of no more than 168 e - Å -2 , achieving averaged resolutions ranging from 23 to 35 Å, as estimated by Fourier shell correlation (FSC) at 0.5. Each map allows us to identify distinct RNA helices and determine a unique tertiary structure. Statistical analysis of these 120 structures confirms two reported conformations and reveals a range of kinetically trapped, intermediate, and highly compacted states, demonstrating a maturation folding landscape likely driven by helix-helix compaction interactions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A framework to quantify mass flow and assess food loss and waste in the US food supply chain

Abstract Reducing food loss and waste can improve the efficiency of food supply chains and provide food security. Here we estimate mass flow as well as food loss and waste along the US food supply chain for 10 commodity groups and nine management pathways to provide a baseline for designing efficient strategies to reduce, recycle, and recover food loss and waste. We estimate a total food loss and waste of 335.4 million metric tonnes from the U.S. food supply chain in 2016. Water evaporation (19%), recycling (55%), and landfill, incineration, or wastewater treatment (23%) accounted for most of the loss and waste. The consumption stage accounted for 57% of the food loss and waste disposed of through landfill, incineration, or wastewater treatment. Manufacturing was the largest contributor to food loss and waste (61%) but had a high recycling rate. High demand, perishable products accounted for 67% of food waste. We suggest that funding for infrastructure and incentives for earlier food donation can promote efficiency and sustainability of the supply chain, promote FLW collection and recycling along the U.S. FSC, and improve consumer education in order to move towards a circular economy.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Missing Wedge Completion via Unsupervised Learning with Coordinate Networks

Cryogenic electron tomography (cryoET) is a powerful tool in structural biology, enabling detailed 3D imaging of biological specimens at a resolution of nanometers. Despite its potential, cryoET faces challenges such as the missing wedge problem, which limits reconstruction quality due to incomplete data collection angles. Recently, supervised deep learning methods leveraging convolutional neural networks (CNNs) have considerably addressed this issue; however, their pretraining requirements render them susceptible to inaccuracies and artifacts, particularly when representative training data is scarce. To overcome these limitations, we introduce a proof-of-concept unsupervised learning approach using coordinate networks (CNs) that optimizes network weights directly against input projections. This eliminates the need for pretraining, reducing reconstruction runtime by 3–20× compared to supervised methods. Our in silico results show improved shape completion and reduction of missing wedge artifacts, assessed through several voxel-based image quality metrics in real space and a novel directional Fourier Shell Correlation (FSC) metric. Our study illuminates benefits and considerations of both supervised and unsupervised approaches, guiding the development of improved reconstruction strategies.

42 ENGINEERING↗
NASA NTRS1976

An Evaluation of Reaction Wheel Emitted Vibrations for Large Space Telescope

Emitted force and torque vibration were measured in three axes for three Sperry reaction wheels. Data were taken for both hard and soft mounts; tests were conducted at constant speeds and during runup-rundown over a 0 to 5000 rpm range. A FSC, 7 ft-lb-sec and HEAO, 30 ft-lb-sec ball bearing reaction wheel and a model magnetic bearing were tested. Data analysis was conducted to identify the principal resonances in the 10 to 120 Hz region. Although some particular phenomena remain unexplained, in general good agreement is attained between the analytical predictions and test data. Predictions were also made of the expected emitted vibrations for an LST sized ball bearing and magnetic bearing reaction wheel using engineering judgment and the test data obtained. Additional tests were also run on the 101H duplex bearing pairs used in the reaction wheel suspension to determine bearing stiffness characteristics in the pre-breakaway zero speed region.

Source record↗
NASA NTRS1990

Sealing Nitrogen Tetroxide Leaks

Use of Furmanite FSC-N-6B sealant in clam-shell sealing device makes it possible to stop leaks of nitrogen tetroxide through defective or improperly-seated plumbing fittings. Devised to stop leaks in vent line of small rocket motor on Space Shuttle. Also used on plumbing containing hydrazine and other hazardous fluids, and repair withstands severe temperature, vibration, and shock. Leaks stopped in place, without draining or replacement of leaking parts.

Garrard, George G.↗
NASA NTRS1991

Overview of arraying techniques in the deep space network

Four different arraying schemes that can be used by the Deep Space Network are functionally discussed and compared. These include symbol stream combining (SSC), baseband combining (BC), carrier arraying (CA), and full spectrum combining (FSC). In addition, sibeband aiding (SA) is also included and compared even though it is not an arraying scheme, since it uses a single antenna. Moreover, combinations of these schemes are discussed, such as carrier arraying with sideband aiding and baseband combining (CA/SA/BC) or carrier arraying with symbol stream combining (CA/SSC). Complexity versus performance is traded off and the benefits to the reception of existing spacecraft signals are discussed. Recommendations are made as to the best techniques for particular configurations.

Mileant, A.↗
NASA NTRS1994

Analysis of EDP performance

The objective of this contract was the investigation of the potential performance gains that would result from an upgrade of the Space Station Freedom (SSF) Data Management System (DMS) Embedded Data Processor (EDP) '386' design with the Intel Pentium (registered trade-mark of Intel Corp.) '586' microprocessor. The Pentium ('586') is the latest member of the industry standard Intel X86 family of CISC (Complex Instruction Set Computer) microprocessors. This contract was scheduled to run in parallel with an internal IBM Federal Systems Company (FSC) Internal Research and Development (IR&D) task that had the goal to generate a baseline flight design for an upgraded EDP using the Pentium. This final report summarizes the activities performed in support of Contract NAS2-13758. Our plan was to baseline performance analyses and measurements on the latest state-of-the-art commercially available Pentium processor, representative of the proposed space station design, and then phase to an IBM capital funded breadboard version of the flight design (if available from IR&D and Space Station work) for additional evaluation of results. Unfortunately, the phase-over to the flight design breadboard did not take place, since the IBM Data Management System (DMS) for the Space Station Freedom was terminated by NASA before the referenced capital funded EDP breadboard could be completed. The baseline performance analyses and measurements, however, were successfully completed, as planned, on the commercial Pentium hardware. The results of those analyses, evaluations, and measurements are presented in this final report.

Source record↗
NASA NTRS1995

Effects of correlated noise on the full-spectrum combining and complex-symbol combining arraying techniques

The process of combining telemetry signals received at multiple antennas, commonly referred to as arraying, can be used to improve communication link performance in the Deep Space Network (DSN). By coherently adding telemetry from multiple receiving sites, arraying produces an enhancement in signal-to-noise ratio (SNR) over that achievable with any single antenna in the array. A number of different techniques for arraying have been proposed and their performances analyzed in past literature. These analyses have compared different arraying schemes under the assumption that the signals contain additive white Gaussian noise (AWGN) and that the noise observed at distinct antennas is independent. In situations where an unwanted background body is visible to multiple antennas in the array, however, the assumption of independent noises is no longer applicable. A planet with significant radiation emissions in the frequency band of interest can be one such source of correlated noise. For example, during much of Galileo's tour of Jupiter, the planet will contribute significantly to the total system noise at various ground stations. This article analyzes the effects of correlated noise on two arraying schemes currently being considered for DSN applications: full-spectrum combining (FSC) and complex-symbol combining (CSC). A framework is presented for characterizing the correlated noise based on physical parameters, and the impact of the noise correlation on the array performance is assessed for each scheme.

Vazirani, P.↗
NASA NTRS1994

Overview arraying techniques for deep space communications

Four different arraying schemes applicable to deep space communications are discussed and analyzed. These include symbol stream combining (SSC), baseband combining (BC), carrier arraying (CA) and full spectrum combining (FSC). Complexity versus performance is traded off throughout the paper and benefits to the reception of existing spacecraft signals are discussed.

SUPPRESSED CARRIERS↗
NASA NTRS1999

The Most Luminous Object in the Universe: Shrouded Quasar or Proto-Galaxy

We have used ASCA to observe the IRAS source FSC 10214+4724, which is identified with a galaxy at a redshift of 2.286. When first discovered, it was believed to be the most luminous object in the universe. Subsequent HST images have established that it is gravitationally-lensed by a foreground cluster. It is still a very powerful object, but not extraordinarily so. Observations at other wavebands have not established whether it is a dust-shrouded quasar or a young, massive galaxy in the process of formation. Since quasars are strong emitters of hard X-rays, while proto-galaxies would not be, and since the opacity of gas and dust is relatively small in the energy regime probed by ASCA (3 to 30 keV in the galaxy rest frame), we undertook these observations to search for a heavily shrouded quasar that might be invisible at lower energies. However, the observations did not detect any emission from this object. This either means that the galaxy is in fact powered by a starburst or that the putative quasar is located behind a very high column density of absorbing gas (N_H > 10(exp 25)/sq cm), so that not even hard X-rays are transmitted. A hidden quasar should be visible in reflected light in X-ray data of higher sensitivity. Observations with NASA's Chandra X-ray Observatory or ESA's XMM are required to settle the matter. No publication resulted from our null result.

Heckman, Timothy M.↗
NASA NTRS1999

Measurements of Nucleation-Mode Particle Size Distributions in Aircraft Plumes during SULFUR 6

This report summarizes the participation of the University of Denver in an airborne measurement program, SULFUR 6, which was undertaken in late September and early October of 1998 by the Deutsches Zentrum fur Luft und Raumfahrt (DLR). Scientific findings from two papers that have been published or accepted and from one manuscript that is in preparation are presented. The SULFUR 6 experiment was designed to investigate the emissions from subsonic aircraft to constrain calculations of possible atmospheric chemical and climatic effects. The University of Denver effort contributed toward the following SULFUR 6 goals: (1) To investigate the relationship between fuel sulfur content (FSC--mass of sulfur per mass of fuel) and particle number and mass emission index (El--quantity emitted per kg of fuel burned); (2) To provide upper and lower limits for the mass conversion efficiency (nu) of fuel sulfur to gaseous and particulate sulfuric acid; (3) To constrain models of volatile particle nucleation and growth by measuring the particle size distribution between 3 and 100 nm at aircraft plume ages ranging from 10(exp -1) to 10(exp 3) s; (4) To determine microphysical and optical properties and bulk chemical composition of soot particles in aircraft exhaust; and (5) To investigate the differences in particle properties between aircraft plumes in contrail and non-contrail situations. The experiment focused on emissions from the ATTAS research aircraft (a well characterized, but older technology turbojet) and from an in-service Boeing 737-300 aircraft provided by Lufthansa, with modem, high-bypass turbofan engines. Measurements were made from the DLR Dassault Falcon 900 aircraft, a modified business jet. The Atmospheric Effects of Aviation Program (AEAP) provided funding to operate an instrument, the nucleation-mode aerosol size spectrometer (N-MASS), during the SULFUR 6 campaign and to analyze the data. The N-MASS was developed at the University of Denver with the support of NOAA's Office of Global Programs and NASA's AEAP and measures particle size distributions in the 4-100 nm range.

Brock, Charles A.↗
NASA NTRS2004

Automated Classification of ROSAT Sources Using Heterogeneous Multiwavelength Source Catalogs

We describe an on-line system for automated classification of X-ray sources, ClassX, and present preliminary results of classification of the three major catalogs of ROSAT sources, RASS BSC, RASS FSC, and WGACAT, into six class categories: stars, white dwarfs, X-ray binaries, galaxies, AGNs, and clusters of galaxies. ClassX is based on a machine learning technology. It represents a system of classifiers, each classifier consisting of a considerable number of oblique decision trees. These trees are built as the classifier is 'trained' to recognize various classes of objects using a training sample of sources of known object types. Each source is characterized by a preselected set of parameters, or attributes; the same set is then used as the classifier conducts classification of sources of unknown identity. The ClassX pipeline features an automatic search for X-ray source counterparts among heterogeneous data sets in on-line data archives using Virtual Observatory protocols; it retrieves from those archives all the attributes required by the selected classifier and inputs them to the classifier. The user input to ClassX is typically a file with target coordinates, optionally complemented with target IDs. The output contains the class name, attributes, and class probabilities for all classified targets. We discuss ways to characterize and assess the classifier quality and performance and present the respective validation procedures. Based on both internal and external validation, we conclude that the ClassX classifiers yield reasonable and reliable classifications for ROSAT sources and have the potential to broaden class representation significantly for rare object types.

McGlynn, Thomas↗