Engineering PapersSearch

SEARCH · Engineering Papers

Results for “EMMA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Representing cropping systems with the MEMS 2 ecosystem model

Abstract Croplands have been the focus of substantial investigation due to their considerable potential for sequestering carbon. Understanding the potential for soil organic carbon (SOC) sequestration and necessary management strategies will be enabled with accurate process‐based models. Accurately representing crop growth and agricultural practices will be critical for realistic SOC modeling. The MEMS 2 model incorporates a current understanding of SOC formation and stabilization, measurable SOC pools, and deep SOC dynamics and is seen as a highly promising tool to inform management intervention for SOC sequestration. Thus far, MEMS 2 has been developed to represent grasslands. In this study, we further developed MEMS 2 to model annual grain crops and common agricultural practices, such as irrigation, fertilization, harvesting, and tillage. Using four Ameriflux sites, we demonstrated an accurate simulation of crop growth and development. Model performance was strong for simulating aboveground biomass (index of agreement [d] range of 0.89–0.98) and green leaf area index (dfrom 0.90 to 0.96) across corn, soybean, and winter wheat. Good agreement with observations was also achieved for net ecosystem CO 2 exchange (dfrom 0.90 to 0.96), evapotranspiration (dfrom 0.91 to 0.94), and soil temperature (dof 0.96), while discrepancy with the available soil water content data remain (dfrom 0.14 to 0.81 at four depths to 100 cm). While we will continue model testing and improvement, MEMS 2 (version 2.14) has now demonstrated its ability to effectively simulate the growth of common grain crops and practices.

Agriculture

Tailoring the Properties of Chemically Recyclable Polyethylene‐Like Multiblock Polymers by Modulating the Branch Structure

Abstract Developing plastics that fill the need of polyolefins yet are more easily recyclable is a critical need to address the plastic waste crisis. However, most efforts in this vein have focused on high‐density polyethylene (PE), while many different types of PE exist. To create broadly sustainable PE with modular properties, we present the synthesis, characterization, and demonstration of materials applications for chemically recyclable PE‐like multiblock polymers prepared from distinct hard and soft blocks using ruthenium‐catalyzed dehydrogenative polymerization. By altering the branching pattern within the soft blocks, a series of PE‐like multiblock polymers were synthesized with tunable glass transition temperatures ( T g ) while maintaining consistent high melting temperatures ( T m ). A clear U‐shape trend between T g and mechanical properties was found, showcasing their potential as sustainable materials with tailored properties spanning commercial linear low‐density polyethylene (LLDPE) and low‐density polyethylene (LDPE). These materials offer adjustable adhesive strength to metal and demonstrate chemical recyclability and selective depolymerization in mixed plastic streams, promoting circularity and separation.

Zhao, Yucheng

Tailoring the Properties of Chemically Recyclable Polyethylene‐Like Multiblock Polymers by Modulating the Branch Structure

Abstract Developing plastics that fill the need of polyolefins yet are more easily recyclable is a critical need to address the plastic waste crisis. However, most efforts in this vein have focused on high‐density polyethylene (PE), while many different types of PE exist. To create broadly sustainable PE with modular properties, we present the synthesis, characterization, and demonstration of materials applications for chemically recyclable PE‐like multiblock polymers prepared from distinct hard and soft blocks using ruthenium‐catalyzed dehydrogenative polymerization. By altering the branching pattern within the soft blocks, a series of PE‐like multiblock polymers were synthesized with tunable glass transition temperatures ( T g ) while maintaining consistent high melting temperatures ( T m ). A clear U‐shape trend between T g and mechanical properties was found, showcasing their potential as sustainable materials with tailored properties spanning commercial linear low‐density polyethylene (LLDPE) and low‐density polyethylene (LDPE). These materials offer adjustable adhesive strength to metal and demonstrate chemical recyclability and selective depolymerization in mixed plastic streams, promoting circularity and separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH

Photooxidation of Polyolefins to Produce Materials with In-Chain Ketones and Improved Materials Properties

Herein, we report a selective photooxidation of commodity postconsumer polyolefins to produce polymers with in-chain ketones. The reaction does not involve the use of catalyst, metals, or expensive oxidants, and selectively introduces ketone functional groups. Under mild and operationally simple conditions, yields up to 1.23 mol % of in-chain ketones were achieved. Installation of in-chain ketones resulted in materials with improved adhesion of the materials and miscibility of mixed plastics relative to the unfunctionalized plastics. The introduction of ketone groups into the polymer backbone allows these materials to react with diamines, forming dynamic covalent polyolefin networks. This strategy allows for the upcycling of mixed plastic waste into reprocessable materials with enhanced performance properties compared to polyolefin blends. Mechanistic studies support the involvement of photoexcited nitroaromatics in consecutive hydrogen and oxygen atom transfer reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH

Upcycling Polynorbornene Derivatives into Chemically Recyclable Multiblock Linear and Thermoset Plastics

Synthetic polymers have found widespread use, but their ineffective end-of-life treatment is causing a significant environmental and human health crisis. Here, we demonstrate the upcycling of polynorbornene derivatives (pNBEs) through their deconstruction into distinct oligomeric buildings blocks that can be repolymerized into chemically recyclable pNBEs-like multiblock polymers via dehydrogenative polymerization. The resulting materials exhibit diverse mechanical properties, while integrating high melting temperatures (T m as high as 133 °C). Notably, this method could also enable the selective deconstruction of permanently cross-linked polydicyclopentadiene (pDCPD) thermosets into telechelic-OH functionalized oligomers, overcoming the significant challenges posed by their robust network structure in recycling and degradation. The resulting pDCPD oligomers can subsequently be repolymerized with macrodiols to create multiblock thermosets with tunable mechanical properties, including Young's modulus and tensile elongation. After use, upcycled plastics could be effectively deconstructed back to the oligomers for recovery and repolymerization. Overall, this work establishes an approach that can be utilized to upcycle pNBEs into previously inaccessible multiblock thermosets and thermoplastics with full recyclability, and may be generalizable to a range of polymers to shift their end-of-life waste disposal toward sustainable recovery and reuse.

36 MATERIALS SCIENCE

Repurposing Post-Consumer Polyethylene to Access Cross-Linked Polyethylene with Reprocessabilty, Recyclability, and Tunable Properties

Polyethylene (PE) is the most widely produced plastic but accumulation and resistance to degradation has significantly contributed to the plastic waste crisis. Upcycling has presented promising solutions to transform PE waste into value-added products. In this study, mixed post-consumer PE was successfully repurposed into reprocessable and chemically recyclable cross-linked polyethylene (XLPE). This process involved converting PE into telechelic oligomers, followed by repolymerization using a hybrid cross-linking system consisting of a dynamic cross-linker 2,4,6-triethoxy-1,3,5-triazine (TETA) and non-dynamic cross-linker tris(6-isocyanatohexyl)isocyanurate (Tri-HDI). In the resulting XLPE, TETA facilitated iterative reprocessing with minimal property degradation across cycles, whereas Tri-HDI helped preserve functional performance throughout service life. Compared to PE, XLPE exhibited enhanced mechanical properties, reduced creep deformation under application-relevant temperatures, and high temperature structural stability. Notably, copolymerizing PE oligomers with commercial macrodiols was employed to create composite XLPEs, enabling tuning material properties. After use, XLPE can be efficiently and selectively depolymerized under mild conditions, even when mixed with commercial insulator cables. This depolymerization allows for the recovery of the constituent building blocks, enabling purification and subsequent repolymerization for reuse. This approach demonstrates the potential of repurposing plastic waste into sustainable materials and fostering the development of a circular economy.

INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CHEMI

Chemically Recyclable and Tunable Polyolefin-Like Multiblock Copolymer Adhesives

Adhesives are important in creating multilayer products, such as in packaging and construction. Most current hot-melt adhesives such as poly(ethylene-co-vinyl acetate) (EVA) and polyurethanes lack chemical recyclability and do not easily de-bond, complicating recycling. Here, we achieved tunable adhesive properties of chemically recyclable polyolefin-like multiblock copolymers through regulating the incorporation of crystalline hard blocks, amorphous soft blocks, and ester content highlighted by adhesive strengths up to 6.80 MPa. We further demonstrated applications of these adhesives in multi-layer films and showed that the adhesives can be readily de-bonded, recovered, and chemically recycled. Overall, this study into structure-property relationships, including effects of crystallinity, soft-block incorporation, and ester content of the multiblock copolymers on adhesive properties, has resulted in a modular hot-melt adhesive platform that exhibits chemical recyclability for virgin-quality adhesive re-generation, reprocessability for repeated reuse of the recovered adhesive, and tunability for designing adhesives with a wide range of low to high (up to ~80% stronger than EVA) adhesion strengths.

36 MATERIALS SCIENCE

Filling the Gaps: A Bayesian Mixture Model for Imputing Missing Soil Water Content Data

ABSTRACT Soil water content (SWC) data are central to evaluating how soil moisture varies over time and space and influences critical plant and ecosystem functions, especially in water‐limited drylands. However, sensors that record SWC at high frequencies often malfunction, leading to incomplete timeseries and limiting our understanding of dryland ecosystem dynamics. We developed an analytical approach to impute missing SWC data, which we tested at six eddy flux tower sites along an elevation gradient in the southwestern United States. We impute missing data as a mixture of linearly interpolated SWC between the observed endpoints of a missing data gap and SWC simulated by an ecosystem water balance model (SOILWAT2). Within a Bayesian framework, we allowed the relative utility (mixture weight) of each component (linearly interpolated vs. SOILWAT2) to vary by depth, site and gap characteristics. We explored “fixed” weights versus “dynamic” weights that vary as a function of cumulative precipitation, average temperature, and time since the start of the gap. Both models estimated missing SWC data well ( R 2 = 0.70–0.88 vs. 0.75–0.91 for fixed vs. dynamic weights, respectively), but the utility of linearly interpolated versus SOILWAT2 values depended on site and depth. SOILWAT2 was more useful for more arid sites, shallower depths, longer and warmer gaps and gaps that received greater precipitation. Overall, the mixture model reliably gap‐fills SWC, while lending insight into processes governing SWC dynamics. This approach to impute missing data could be adapted to accommodate more than two mixture components and other types of environmental timeseries.

Ogle, Kiona [School of Informatics, Computing, and

A Fluorescence‐Based Transient Expression Assay for the Analysis of Upstream Open Reading Frames in Plants

Upstream open reading frames (uORFs) are regulatory elements present in the 5′ leaders of mRNA that can significantly impact downstream gene expression in eukaryotes. In crop engineering, editing of uORFs can provide an avenue to upregulate expression of native genes without the need to add persistent transgenic copies. Even with genome-wide methods to identify translated uORFs such as ribosome profiling, their functional characterization depends on validation through reporter gene assays and mutagenesis studies. Current screening methods for plants use luciferases or protoplasts to measure differential gene expression between wild-type and mutated transcript leaders, which requires tissue processing and/or substrate addition. Here, we present a time- and cost-efficient alternative to investigate transcript leaders by co-expression of two fluorescent proteins in Nicotiana benthamiana leaf tissue and test our assay on genes involved in photoprotection, editing of which could provide a pathway to increase CO 2 assimilation during sun–shade transitions.

Nicotiana benthamiana

Shrubs Strongly Influence Snow Properties in Two Subarctic Watersheds

Understanding changes in snow distribution in permafrost ecosystems is fundamental to predicting their response to future climate change. The expansion of tall shrubs into tundra ecosystems can trap snow and insulate permafrost ecosystems during the winter, but the overall insulation effect is dependent upon many ecosystem properties. To study shrub–snow–ground interactions, small temperature sensors were deployed at two research sites on the Seward Peninsula of Alaska, USA, during the 2019–2020 winter. Snow temperatures were used to extrapolate multiple metrics, including freezing n-factors, the snow insulation effect, snow cover duration, and the length of the snowmelt period. Statistical and spatial analysis showed that shrub patches were a dominant control on all snow metrics. Within shrub patches, average ground temperatures were 2.1°C warmer, snow persisted 50 days longer, snow insulation was double, and a longer, later spring snowmelt period occurred compared to nonshrubby areas. Site-level differences contributed relatively little to variation in snow metrics, indicating that shrub presence is an overarching driver of snow–ground interactions at the locations examined. Shrub expansion, which is anticipated under climate change, will strongly impact future permafrost distribution and Arctic energy, water, and carbon cycles through snow–shrub–ground feedbacks.

54 ENVIRONMENTAL SCIENCES

Uncovering Sequence and Structural Characteristics of Fungal Expansin‐Related Proteins With Potential to Drive Substrate Targeting

Expansins loosen plant cell wall networks through disrupting non-covalent bonds between cellulose microfibrils and matrix polysaccharides. Whereas expansins were first discovered in plants, expansin-related proteins have since been identified in bacteria and fungi. The biological function of microbial expansins remains unclear; however, several studies have shown distinct binding preferences toward different structural polysaccharides. Earlier studies of bacterial expansin-related proteins uncovered sequence and structural features that correlate to substrate binding. Herein, 20 fungal expansin-related sequences were recombinantly produced in Komagataella phaffii, and the purified proteins were compared in terms of substrate binding to cellulosic and chitinous substrates. The impact of pH on the zeta potential of prioritized substrates was also measured, and Principal Component Analysis was performed to uncover correlations between protein characteristics (e.g., pI, hydrophobicity, surface charge distribution) and measured substrate binding preferences. Whereas acidic proteins with a predicted pI less than 5.0 preferentially bound to chitin, basic proteins with pI greater than 8.0 preferentially bound to xylan and xylan-containing fiber. Similar to many cellulases, binding to cellulose was correlated to relatively high aromatic amino acid content in the protein sequence and presence of a carbohydrate binding module (CBM), which in the case of expansins is a C-terminal CBM63. Whereas overall sequence characteristics could be correlated to substrate binding preference, the identity of amino acids occupying conserved positions that impact protein activity was better correlated with loosenin versus expansin classifications.

chitin

Microstructure‐Dependent Sodium Storage Mechanisms in Hard Carbon Anodes

Sustainable energy storage is essential to support the transition to renewables and meet the increasing demand for energy. Sodium‐ion batteries (NIBs) are attractive for grid‐scale energy storage due to the abundance and low cost of sodium, sustainability of other battery components, and electrochemical performance. Hard carbon (HC) is a leading anode material for NIBs, but its complex microstructure complicates the understanding of sodium storage mechanisms. Using X‐ray total scattering and density functional theory calculations, this study clarifies how HC's microstructural variations influence sodium storage across the slope (high potential) and plateau (low potential) regions of the potential capacity curve. In the slope region, sodium initially adsorbs at high‐binding energy defect sites and subsequently intercalates between graphene layers, adsorbing at low‐binding energy defect sites, correlating with different slopes observed during initial sodiation. Initial irreversibility arises from sodium trapping at surface defects and solid electrolyte interface formation. In the plateau region, sodium simultaneously intercalates and fills pores, influenced by pore size, interlayer spacing, and defect concentration. HCs with larger pore sizes form larger sodium clusters. In conclusion, the proposed mechanism underscores the role of microstructure engineering in enhancing HC performance and advancing NIBs for grid‐scale energy storage.

36 MATERIALS SCIENCE

Omics-driven onboarding of the carotenoid producing red yeast Xanthophyllomyces dendrorhous CBS 6938

Transcriptomics is a powerful approach for functional genomics and systems biology, yet it can also be used for genetic part discovery. Here, we derive constitutive and light-regulated promoters directly from transcriptomics data of the basidiomycete red yeast Xanthophyllomyces dendrorhous CBS 6938 (anamorph Phaffia rhodozyma) and use these promoters with other genetic elements to create a modular synthetic biology parts collection for this organism. X. dendrorhous is currently the sole biotechnologically relevant yeast in the Tremellomycete class-it produces large amounts of astaxanthin, especially under oxidative stress and exposure to light. Thus, we performed transcriptomics on X. dendrorhous under different wavelengths of light (red, green, blue, and ultraviolet) and oxidative stress. Differential gene expression analysis (DGE) revealed that terpenoid biosynthesis was primarily upregulated by light through crtI, while oxidative stress upregulated several genes in the pathway. Further gene ontology (GO) analysis revealed a complex survival response to ultraviolet (UV) where X. dendrorhous upregulates aromatic amino acid and tetraterpenoid biosynthesis and downregulates central carbon metabolism and respiration. The DGE data was also used to identify 26 constitutive and regulated genes, and then, putative promoters for each of the 26 genes were derived from the genome. Simultaneously, a modular cloning system for X. dendrorhous was developed, including integration sites, terminators, selection markers, and reporters. Each of the 26 putative promoters were integrated into the genome and characterized by luciferase assay in the dark and under UV light. The putative constitutive promoters were constitutive in the synthetic genetic context, but so were many of the putative regulated promoters. Notably, one putative promoter, derived from a hypothetical gene, showed ninefold activation upon UV exposure. Thus, this study reveals metabolic pathway regulation and develops a genetic parts collection for X. dendrorhous from transcriptomic data. Therefore, this study demonstrates that combining systems biology and synthetic biology into an omics-to-parts workflow can simultaneously provide useful biological insight and genetic tools for nonconventional microbes, particularly those without a related model organism. This approach can enhance current efforts to engineer diverse microbes.

60 APPLIED LIFE SCIENCES

Effects of Plume Targeted Cooling on Residual Stress in Controlled Atmosphere Plasma Sprayed Coatings

Thermal spray processes can benefit from cooling to maintain substrate temper, reduce processing times, and manage thermally induced residual stresses. “Plume quenching” is a plume-targeted cooling technique which has been shown to reduce substrate temperatures by redirection of hot plume gases using a lateral argon curtain injected into the plume, while limiting interaction with the substrate or affecting coating properties. Here, this study explores the use of this technique for residual stress management by reducing the thermally driven component in nickel and tantalum coatings on titanium and aluminum substrates. The in-situ residual stress profiles were measured for all substrate and coating pairings during spraying and cooling, and the deposition and thermal stresses recorded. For substrate and coating pairings where the predominant component of residual stress was thermal (driven by a large difference in coefficient of thermal expansion, Δα, between coating and substrate), plume quenching reduced both the thermal stress and the final stress state of the coating. This was seen primarily in tantalum on aluminum coatings where the Δα was -17 × 10 -6 /°C, and thermal stress was reduced by 7.5% and 22.4% for the plume quenching rates of 50 and 100 slpm, respectively.

42 ENGINEERING

Impact of Cyber Threat Awareness on Driver Response to an Unexpected Vehicle Cyberattack

Here, the integration of advanced cyber-physical systems in heavy vehicles introduces new vulnerabilities by expanding the possibility of cyberattacks. The objective of this study is to evaluate (1) how threat awareness influences driver response to an unexpected cyberattack, (2) how the provision of a basic cyberattack response protocol influences driver performance, and (3) how professionally trained versus standard drivers compare in their responses to a cyberattack. An on-road driving study (N = 50) was conducted using a medium heavy-duty vehicle. Participants were divided into three groups: Control, which remained unaware of any potential cyberattack; Aware, which was informed about the potential cyberattack; and Aware + Protocol, which received the same warning as the Aware group with the addition of a basic cyberattack response protocol. An instrument cluster cyberattack was executed at the same location for all participants. The findings highlight the essential role of awareness and response protocol in enhancing driver response to an unexpected vehicle cyberattack. The Aware + Protocol group had the highest stop rate (100%) and the shortest stopping distances (224 m for standard drivers and 254 m for professionals), compared to the Control group (828 and 520 m, respectively). Aware + Protocol also had the fastest reaction time, averaging 7.53 s, versus 16.12 s (Aware) and 30.29 s (Control). These results emphasize that awareness alone is insufficient. Providing drivers with clear, actionable protocols significantly improves their ability to react quickly and safely to cyberattacks, enhancing overall road safety.

Cybersecurity

Text Mining for Process–Structure–Properties Relationships in Metals

With the advent of large language models (LLMs), the vast unstructured text within millions of academic papers is increasingly accessible for materials discovery—although significant challenges remain. While LLMs offer promising few- and zero-shot learning capabilities, particularly valuable in the materials domain where expert annotations are scarce, general-purpose LLMs often fail to address key materials-specific queries without further adaptation. To bridge this gap, fine-tuning LLMs on human-labeled data is essential for effective structured knowledge extraction (Liu in The Importance of Human-Labeled Data in the Era of LLMs, 2023). Here, in this study, we introduce a novel annotation schema designed to extract generic process–structure–properties relationships from scientific literature. We demonstrate the utility of this approach using a dataset of 128 abstracts, with annotations drawn from two distinct domains: high-temperature materials (Domain I) and uncertainty quantification in simulating materials microstructure (Domain II). Initially, we developed a conditional random field (CRF) model based on MatBERT—a domain-specific BERT variant—and evaluated its performance on Domain I. Subsequently, we compared this model with a fine-tuned LLM (GPT-4o from OpenAI) under identical conditions. Our results indicate that fine-tuning LLMs can significantly improve entity extraction performance over the BERT-CRF baseline on Domain I. However, when additional examples from Domain II were incorporated, the performance of the BERT-CRF model became comparable to that of the GPT-4o model. These findings underscore the potential of our schema for structured knowledge extraction and highlight the complementary strengths of both modeling approaches.

Materials science

A Review of Abrupt Permafrost Thaw: Definitions, Usage, and a Proposed Conceptual Framework

Purpose of ReviewWe review how ‘abrupt thaw’ has been used in published studies, compare these definitions to abrupt processes in other Earth science disciplines, and provide a definitive framework for how abrupt thaw should be used in the context of permafrost science.Recent FindingsWe address several aspects of permafrost systems necessary for abrupt thaw to occur and propose a framework for classifying permafrost processes as abrupt thaw in the future. Based on a literature review and our collective expertise, we propose that abrupt thaw refers to thaw processes that lead to a substantial persistent environmental change within a few decades. Abrupt thaw typically occurs in ice-rich permafrost but may be initiated in ice-poor permafrost by external factors such as hydrologic change (i.e., increased streamflow, soil moisture fluctuations, altered groundwater recharge) or wildfire.SummaryPermafrost thaw alters greenhouse gas emissions, soil and vegetation properties, and hydrologic flow, threatening infrastructure and the cultures and livelihoods of northern communities. The term ‘abrupt thaw’ has emerged in scientific discourse over the past two decades to differentiate processes that rapidly impact large depths of permafrost, such as thermokarst, from more gradual, top-down thaw processes that impact centimeters of near-surface permafrost over years to decades. However, there has been no formal definition for abrupt thaw and its use in the scientific literature has varied considerably. Our standardized definition of abrupt thaw offers a path forward to better understand drivers and patterns of abrupt thaw and its consequences for global greenhouse gas budgets, impacts to infrastructure and land-use, and Arctic policy- and decision-making.

Webb, Hailey