Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BLOOD PLASMA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Plasma stress hormones in resting rats - Eighty four day study

The effects of a repeated mild stress of handling and placing rats temporarily into unfamiliar cages on the blood-plasma concentration of the stress hormones (corticosterone, ACDH, and prolactin) were investigated in male Sprague-Dawley rats subjected to this type of stress once every week during a period of three months. Results showed that repeated mild stress of handling (as well as repeated blood sampling) did not affect the plasma stress-hormone concentrations in these animals.

Popovic, Vojin↗
NASA NTRS1975

Fate in humans of the plasticizer, DI (2-ethylhexyl) phthalate, arising from transfusion of platelets stored in vinyl plastic bags

Platelet concentrates were shown to contain 18-38 mg/100 ml of a phthalate plasticizer (DEHP) which arose by migration from the vinyl plastic packs in which the plateletes were prepared and stored. Transfusion of these platelets into 6 adult patients with leukemia resulted in peak blood plasma levels of DEHP ranging from 0.34 - 0.83 mg/100 ml. The blood levels fell mono-exponentially with a mean rate of 2.83 percent per minute and a half-life of 28.0 minutes. Urine was assayed by a method that would measure unchanged DEHP as well as all phthalic acid-containing metabolities. In two patients, at most 60 and 90% of the infused dose, respectively, was excreted in the urine collected for 24 hours post-transfusion. These estimates, however, could be high due to the simultaneous excretion of DEHP remaining from previous transfusions or arising from uncontrolled environmental exposures.

Rubin, R. J.↗
NASA NTRS2005

Texturing Blood-Glucose-Monitoring Optics Using Oxygen Beams

A method has been invented for utilizing directed, hyperthermal oxygen atoms and ions for texturing tips of polymeric optical fibers or other polymeric optical components for use in optical measurement of concentration of glucose in blood. The required texture of the sensory surface of such a component amounts to a landscape of microscopic hills having high aspect ratios (hills taller than they are wide), with an average distance between hills of no more than about 5 m. This limit on the average distance between hills is chosen so that blood cells (which are wider) cannot enter the valleys between the hills, where they could obstruct optical sensing of glucose in the blood plasma. On the other hand, the plasma is required to enter the valleys, and a high aspect ratio is intended to maximize the hillside and valley surface area in contact with the plasma, thereby making it possible to obtain a given level of optical glucose- measurement sensitivity with a relatively small volume of blood. The present method of texturing by use of directed, hyperthermal (particle energy >1 eV) oxygen atoms and ions stands in contrast to a prior method of texturing by use of thermal monatomic oxygen characterized by a temperature of the order of 0.5 eV. The prior method yields low-aspect- ratio (approximately hemispherical) craters that are tens of microns wide . too wide to exclude blood cells. The figure schematically depicts parts of a typical apparatus for texturing according to the present method. One or more polymeric optical components to be textured (e.g., multiple optical fibers bundled together for simultaneous processing) are mounted in a vacuum chamber facing a suitable ion- or atom-accelerating device capable of generating a beam of oxygen atoms and/or ions having kinetic energies >1 eV. Typically, such a device includes a heated cathode, in which case it is desirable to interpose a water-cooled thermal-radiation shield to prevent melting of the polymeric component(s) to be textured. In operation, the chamber is evacuated to a pressure .10.5 torr (less than or equal to approximately 1.3 mPa), then the beam is turned on. The resulting texture is characterized by approximately conical hills having aspect ratios greater than 1. In experiments, it was demonstrated that separations between adjacent hills can be made .1 m and that the separations and heights of the hills can be varied by varying the fluence of monatomic oxygen and/or oxygen ions.

Banks, Bruce↗
NASA NTRS2006

Improved Oxygen-Beam Texturing of Glucose-Monitoring Optics

An improved method has been devised for using directed, hyperthermal beams of oxygen atoms and ions to impart desired textures to the tips of polymethylmethacrylate [PMMA] optical fibers to be used in monitoring the glucose content of blood. The improved method incorporates, but goes beyond, the method described in Texturing Blood-Glucose- Monitoring Optics Using Oxygen Beams (LEW-17642-1), NASA Tech Briefs, Vol. 29, No. 4 (April 2005), page 11a. The basic principle of operation of such a glucose-monitoring sensor is as follows: The textured surface of the optical fiber is coated with chemicals that interact with glucose in such a manner as to change the reflectance of the surface. Light is sent down the optical fiber and is reflected from, the textured surface. The resulting change in reflectance of the light is measured as an indication of the concentration of glucose. The required texture on the ends of the optical fibers is a landscape of microscopic cones or pillars having high aspect ratios (microscopic structures being taller than they are wide). The average distance between hills must be no more than about 5 mso that blood cells (which are wider) cannot enter the valleys between the hills, where they would interfere with optical sensing of glucose in the blood plasma. On the other hand, the plasma is required to enter the valleys, and high aspect ratio structures are needed to maximize the surface area in contact with the plasma, thereby making it possible to obtain a given level of optical glucose-measurement sensitivity with a relatively small volume of blood. There is an additional requirement that the hills be wide enough that a sufficient amount of light can propagate into them and, after reflection, can propagate out of them. The method described in the cited prior article produces a texture comprising cones and pillars that conform to the average-distance and aspect-ratio requirements. However, a significant fraction of the cones and pillars are so narrow that not enough light can propagate along them. The improved method makes it possible to form wider cones and pillars while still satisfying the average-distance and aspect-ratio requirements. In the improved method, as in the previously reported method, multiple optical fibers are first bundled together for simultaneous texturing of their distal tips. However, prior to texturing by exposure to an oxygen beam, the tips are first coated by vapor deposition of a thin, sparse layer of aluminum: The exposure to the aluminum vapor must be short enough (typically of the order of seconds) so that the aluminum nucleates into islands separated by uncoated areas. The coated tips are textured by exposure to a directed beam of hyperthermal (kinetic energy >1 eV) oxygen atoms and/or ions in a vacuum chamber, as in the previously reported method. The aluminum islands partially shield the underlying PMMA from oxidation and erosion by the beam, so that the cones or pillars remaining after texturing are wider than they would otherwise be. To some extent, the dimensions of the hills and the distances between them can be tailored through choice of the thickness of the aluminum coat and/or the oxygen-beam fluence. The figure illustrates an example of texturing of the tip of a PMMA optical fiber without and with prior aluminum coating.

Banks, Bruce A.↗
NASA NTRS1974

Effect of 14 days of bed rest on urine metabolite excretion and plasma enzyme levels

After 1 week of ambulatory base-line measurement, a group of 8 men 19-26 years of age remained continuously recumbent for 14 days. Studies were continued for 1 week following the prolonged recumbency. Urine excretion rates for a number of constituents were determined 2 days before bed rest, on day 14 of bed rest, and day 6 after bed rest. Blood plasma samples were also obtained at these times, and analyzed for several enzymes. On day 14 of bed rest significant increases were observed in urine excretion of total osmotically-active substances, magnesium, calcium, phosphate, creatinine, hydroxyproline, and 17-OH corticosteroids. A decrease occurred in urinary glucose excretion. Plasma levels of alkaline phosphatase and LDH-3 were depressed, while plasma GPT was elevated. Many of these changes persisted on day 6 after bed rest, and are interpreted as concomitants of the disuse atrophy of the musculoskeletal system that characterizes prolonged bed rest and weightlessness.

Pace, N.↗
DOE OSTI2024

Proteomics Analysis of Human Contaminant Proteins

Complete characterization of unknowns via proteomics remains challenging. There exist regions of mass spectrometry-based proteomics data where empirical measurements are not attributed to peptides, and/or sequenced peptides from mass spectra are not attributed to any source. These uncharacterized regions are known as the “dark” proteome. Many proteomics tools rely on some a priori knowledge of sample composition; few tools allow for investigation of unknowns without relying on composition assumptions. Further, the potential low abundance of minor traces in these uncharacterized regions can make elucidation of the “dark” proteome challenging. Herein, we describe the development and evaluation of approaches to study the “dark” proteome and move towards an untargeted approach for more complete characterization, namely by studying minor human protein traces in non-human samples and combining that approach with non-human source organism identification without relying on assumptions. Human protein markers, in the form of genetically variant peptides, have been extensively examined in a variety of human matrices, including blood, plasma, and hair, but have yet to be investigated in non-human samples, such as cell cultures, as human contaminant traces. Genetically variant peptides are those that are found in proteins carrying single nucleotide polymorphisms. In this work, we aimed to (1) investigate the feasibility of detecting human contaminant genetically variant peptides (GVPs) in a diverse set of non-human organisms using public proteomics data and a computational pipeline, as well as to (2) develop a combined capability for untargeted source organism characterization and GVP detection. To our knowledge, this is the first report of applying these approaches towards a more complete proteomic characterization of unknowns. We successfully demonstrate the feasibility of broad human contaminant GVP detection in proteomics data, develop a better understanding of GVP detectability, characterize the sample-to-sample variability in GVP detection, and identify a core set of GVPs that can potentially be used as markers indicative of the human contaminant traces portion of the “dark” proteome. Further, we developed and evaluated a combined pipeline, MARLOWE-GVP, that enables both untargeted source organism characterization and GVP detection. We show high accuracy of correct source organism characterization and high degree of similarity of human contaminant GVP detection compared to the conventional approach. Success on both these efforts have allowed us to advance our understanding and characterization of the “dark” proteome.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

High-density Lipoprotein (HDL) Structure and Function Proteomics (JM-DP1)

The purpose of this experiment was to investigate how the interactions between APOA1 and APOA2 on the surface of high-density lipoproteins (HDL) impact particle function by studying the effect of exogenous APOA2 on HDL structure through limited proteolysis. Interactions were investigated on HDL isolated from human blood plasma using structural proteomics tools such as chemical cross-linking and limited proteolysis (LiP). The structural proteomics data was acquired using a Q-Exactive HF-X mass spectrometer and processed using MaxQuant software (v.1.6.17.0).

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

PPI DataHub Project Data Package: High-density Lipoprotein (HDL) Structure and Function Proteomics

The purpose of this experiment was to investigate how the interactions between APOA1 and APOA2 on the surface of high-density lipoproteins (HDL) impact particle function. Interactions were investigated on HDL isolated from human blood plasma using structural proteomics tools such as chemical cross-linking and limited proteolysis (LiP). The structural proteomics data was acquired using a Q-Exactive HF-X mass spectrometer and data was processed and compiled using MaxQuant sofware (v.1.6.17.0). Processed datasets are openly accessible from the download button (~2.8 GB) and contain secondary processed LiP and global proteomic results files and supporting metadata materials. Processed data downloads include a sample naming key, processed MaxQuant results/parameters, and protein annotated relative abundance files.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1979

Biocompatibility of surgical implants

Method of selecting biocompatible materials for surgical implants uses fracture mechanic relationships and surface energies of candidate materials in presence of blood plasma. Technique has been used to characterize 190 materials by parameters that reflect their biocompatibility.

Kaelble, D. H.↗
NASA NTRS1980

Effect of central neurotropic substances on the hypophysisadrenal cortex system during immobilization of animals

The immobilization of guinea pigs for 5, 12, 24 and 48 hours, by securing to a slab, results in a persistent rise of the blood plasma 17-oxycorticosteroid concentration. Repeated administration of phenobarbital (50 mg/kg) and of the sodium salt of gamma-oxybutyric acid (500 mg/kg), as well as the combined administration of central m- and n-cholinolytics with small doses of phenobarbital tends to inhibit activation of the adrenal cortex during 48 hour immobilization of the animals. Repeated administration of aminazine (20 mg/kg) tends to decrease activation of the adrenal cortex. The administration of reserpine (0.1-5 mg/kg) 12-18 hours before immobilization of guinea pigs increases the response of the hypophysis-adrenal cortex system.

Ryzhenkov, V. Y.↗
NASA NTRS1981

Cyclic nucleotides in tissues during long-term hypokinesia

Male Wistar rates were kept hypokinetic by placing them in small containers for 22 days. Blood plasma cAMP content was subsequently found increased, and cGMP content decreased, in the experimental animals. Liver and thymus cAMP content was similar in the control and experimental animals. There was a 20 and 38% decrease of cAMP content in the kidneys and spleen, respectively. Hypokinesia's reduction of cyclic nucleotides seems to inhibit RNA and protein synthesis.

Makeyeva, V. F.↗
NASA NTRS1983

Jet Engines as High-Capacity Vacuum Pumps

Large diffuser operations envelope and long run times possible. Jet engine driven ejector/diffuser system combines two turbojet engines and variable-area-ratio ejector in two stages. Applications in such industrial proesses as handling corrosive fumes, evaporation of milk and fruit juices, petroleum distillation, and dehydration of blood plasma and penicillin.

Wojciechowski, C. J.↗
NASA NTRS1985

Volume and density changes of biological fluids with temperature

The thermal expansion of human blood, plasma, ultrafiltrate, and erythrocycte concentration at temperatures in the range of 4-48 C is studied. The mechanical oscillator technique which has an accuracy of 1 x 10 to the -5 th g/ml is utilized to measure fluid density. The relationship between thermal expansion, density, and temperature is analyzed. The study reveals that: (1) thermal expansion increases with increasing temperature; (2) the magnitude of the increase declines with increasing temperature; (3) thermal expansion increases with density at temperatures below 40 C; and (4) the thermal expansion of intracellular fluid is greater than that of extracellular fluid in the temperature range of 4-10 C, but it is equal at temperatures greater than or equal to 40 C.

Hinghofer-Szalkay, H.↗
NASA NTRS1987

Vasopressin and motion sickness in cats

Levels of arginine vasopressin (AVP) in blood plasma and cerebrospinal fluid (CSF) were measured in cats under several motion-sickness-inducing conditions. Plasma AVP increased significantly in both susceptible and resistant animals exposed to motion. When vomiting occurred, levels of plasma AVP were drmatically elevated (up to 27 times resting levels). There was no difference in resting levels of AVP of susceptible and resistant cats. Levels of CSF-AVP were not elevated immediately after vomiting, but the testing levels of CSF-AVP were lower in animals that vomited during motion than in those animals which did not vomit during motion. The results of these experiments show that changes in systemic AVP are directly related to vomiting induced by motion, however, CSF-AVP apparently does not change in association with vomiting. CSF-AVP does appear to be lower in animals that reach frank vomiting during motion stimulation than in animals which do not vomit.

Fox, R. A.↗