Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MELTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Texture Analysis of Inconel 718 with Different Modes During Single-Track Laser Surface Re-Melting

An in-depth understanding of the texture formation in melt pools allows for the modification of the surface layer microstructure and corresponding material properties, providing an opportunity to integrate laser surface re-melting into metal additive manufacturing. This study investigates crystallographic texture formation at different cooling rates in single melting tracks on the Inconel 718 (IN718) plate produced by laser surface re-melting. The cooling rate varies from 2.31 × 10 5 °C/s to 9.56 × 10 5 °C/s with the increase in scanning rates from 400 mm/s to 1200 mm/s, measured by recently developed real-time temperature monitoring of melt pools. Columnar grains are dominant, with distinct crystallographic textures forming in the melt pools. At a slower scanning speed, the keyhole mode shows three different textures forming at different depths (crystallographically layered structure), while, at a faster scanning speed, the conduction mode shows only random grain orientation. There are no pores/voids detected, and the columnar grain morphology and columnar grain width (8.6 μm to 12.4 μm) follow the analysis framework in terms of thermal gradient and solidification rate analysis. This implies that laser surface re-melting provides the potential to modify the surface structure from a random grain orientation to a crystallographically layered structure.

36 MATERIALS SCIENCE↗

Density of NaAlSi 2 O 6 Melt at High Pressure and Temperature Measured by In-Situ X-ray Microtomography

In this study, the volumetric compression of jadeite (NaAlSi 2 O 6 ) melt at high pressures was determined by three-dimensional volume imaging using the synchrotron-based X-ray microtomography technique in a rotation-anvil device. Combined with the sample mass, measured using a high-precision analytical balance prior to the high-pressure experiment, the density of jadeite melt was obtained at high pressures and high temperatures up to 4.8 GPa and 1955 K. The density data were fitted to a third-order Birch-Murnaghan equation of state, resulting in a best-fit isothermal bulk modulus K T0 of $10.8$ $^{+1.9}_{–5.3}$ GPa and its pressure derivative K' T0 of $3.4$ $^{+6.6}_{–0.4}$. Comparison with data for silicate melts of various compositions from the literature shows that alkali-rich, polymerized melts are generally more compressible than alkali-poor, depolymerized ones. The high compressibility of jadeite melt at high pressures implies that polymerized sodium aluminosilicate melts, if generated by low-degree partial melting of mantle peridotite at ~250–400 km depth in the deep upper mantle, are likely denser than surrounding mantle materials, and thus gravitationally stable.

36 MATERIALS SCIENCE↗

Comparison of In-situ Near Infrared Melt Pool Imagery to Optical Microscopy Measurements

Additive manufacturing (AM) is a rapidly growing technology. An area of major importance is the integrity and repeatability of AM parts. The goal is to reduce obstacles to certify AM built parts to allow for use in critical aerospace applications. In-situ nondestructive evaluation sensors can be used for build assessment and can potentially play a key role in certifying AM parts. For example, melt pool features are understood to have a strong correlation to microstructural defects and the use of a near infrared (NIR) camera can be used to record the melt pool, cooling areas, and temperature gradients during the build. This work explores the use of a low cost NIR camera to obtain single line track imagery of the Ti-6Al-4V melt pools for various processing parameters. The NIR camera is radiometrically calibrated and configured in-line with the laser source to obtain high resolution imagery of the melt pool shape and dynamics. The challenge to measure melt pool shapes is to identify the transition points between the metal solid to liquid phase. Factors for melt pool measurements such as thermal camera pixel resolution, surface emissivity, and blurring due to the laser beam movement are discussed. Lastly, the melt pool imagery are compared to optical microscopy measurements for validation.

additive manufacturing↗

Trace Element Partitioning Between Olivine and Melt in Lunar Basalts

Mineral/melt partition coefficients have been widely used to provide insights into magmatic processes. Olivine is one of the most abundant and important minerals in the lunar mantle and mare basalts. Yet, no systematic olivine/melt partitioning data are available for lunar conditions. We report trace element partition data between host mineral olivine and its melt inclusions in lunar basalts. Equilibrium is evaluated using the Fe-Mg exchange coefficient, leading to the choice of melt inclusion-host olivine pairs in lunar basalts 12040, 12009, 15016, 15647, and 74235. Partition coefficients of 21 elements (Li, Mg, Al, Ca, Ti, V, Cr, Mn, Fe, Co, Y, Zr, Nb, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu) were measured. Except for Li, V, and Cr, these elements show no significant difference in olivine-melt partitioning compared to the data for terrestrial samples. The partition coefficient of Li between olivine and melt in some lunar basalts with low Mg# (Mg# < 0.75 in olivine, or < ~0.5 in melt) is higher than published data for terrestrial * Corresponding author. Email address: youxue@umich.edu 2 samples, which is attributed to the dependence of DLi on Mg# and the lack of literature DLi data with low Mg#. The partition coefficient of V in lunar basalts is measured to be 0.17 to 0.74, significantly higher than that in terrestrial basalts (0.003 to 0.21), which can be explained by the lower oxygen fugacity in lunar basalts. The significantly higher DV can explain why V is less enriched in evolved lunar basalts than terrestrial basalts. The partition coefficient of Cr between olivine and basalt melt in the Moon is 0.11 to 0.62, which is lower than those in terrestrial settings by a factor of approximately 2. This is surprising because previous authors showed that Cr partition coefficient is independent of fO2. A quasi-thermodynamically based model is developed to correlate Cr partition coefficient to olivine and melt composition and fO2. The lower Cr partition coefficient between olivine and basalt in the Moon can lead to more Cr enrichment in the lunar magma ocean, as well as more Cr enrichment in mantle-derived basalts in the Moon. Hence, even though Cr is typically a compatible element in terrestrial basalts, it is moderately incompatible in primitive lunar basalts, with a similar degree of incompatibility as V based on partition coefficients in this work, as also evidenced by the relatively constant V/Cr ratio of 0.039 ± 0.011 in lunar basalts. The confirmation of constant V/Cr ratio is important for constraining concentrations of Cr (slightly volatile and siderophile) and V (slightly siderophile) in the bulk silicate Moon.

partition coefficients↗

Assessment of ceramic coatings for metal fuel melting crucible

The objective of this study is to develop a coating method and material for crucibles to prevent material interactions with the U-Zr/U-TRU-Zr fuels during the manufacturing of SFR fuels. Refractory coatings were applied to niobium substrates by vacuum plasma-spray coating method. Melt dipping tests conducted were the coated rods lowered into the fuel melt at 1600 C. degrees, and withdrawn and cooled outside the crucible in the inert atmosphere of the induction furnace. Melt dipping tests of the coated Nb rods indicated that plasma-sprayed Y{sub 2}O{sub 3} coating doesn't form significant reaction layer between fuel melt and coating layer. Melt dipping tests of the coated Nb rods showed that TiC, TaC, and Y{sub 2}O{sub 3} coatings exhibited the promising performance among other ceramic coatings. These materials could be promising candidate materials for the reusable melt crucible of metal fuel for SFR. In addition, in order to develop the vacuum plasma-spray coating method for re-usable crucible of metal fuel slugs to be overcome the issue of thermal expansion mismatch between coating material and crucible, various combinations of coating conditions were investigated to find the bonding effect on the substrate in pursuit of more effective ways to withstand the thermal stresses. It is observed that most coating methods maintained sound coating state in U-Zr melt. (authors)

36 MATERIALS SCIENCE↗

The Effect of Quartz Particle Size and Melt Viscosity on HLW Melter Feed Using Pellet Test Response - 16226

Melter performance is affected by various physical and chemical parameters of the feed. To study the effect of these parameters on waste glass melting efficiency, we monitored the volume expansion of feed pellets in response to heating. This study focuses on the effects of quartz particle size and melt viscosity on a simplified high-alumina high-level waste melter feed labeled A19. In this research the A19 feed was prepared with eight different partitions of quartz particle size ranging from 5 to 250 μm and six modified A19 feeds were formulated to produce melts of viscosities that varied from 1 to 30 Pa s at 1050 deg. C. The volume change of the pellets was monitored with a camera and the volume of pellets was calculated from the profile area of the images. Collected data were then analyzed to characterize the melting behavior of the feed. The low-temperature expansion of the pellet from 400 deg. C to 600 deg. C, a temperature interval at which complex feed reactions occur, was reduced with increasing quartz particle size and viscosity. Foaming occurred from 800 deg. C to 1000 deg. C as the pores were sealed by the connected glass-forming melt. Small sizes of quartz particles caused excessive foaming and earlier onset of foaming, in comparison to larger quartz particle sizes. As is well known, too small or too big quartz particles and high melt viscosity inhibit the rate of melting. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Polyolefin melt-phase effects on alkane hydrogenolysis over Pt catalysts

Supported transition metal catalyzed, chemical upcycling of polyolefins by hydrogenolysis typically occurs in a polymer melt phase at elevated temperatures (T > 200 ºC). Currently, the impact of the melt phase on the catalytic activity and selectivity of the transition metal is largely unknown. Herein, we use a hybrid quantum mechanical/molecular mechanical (QM/MM) approach to investigate the melt-phase effects on the adsorption free energy (∆∆G$^{gas→liq}_{Adsorbate}$) of atomic hydrogen, 12 hydrocarbon molecules, and 4 transition states in the hydrogenolysis mechanism of butane on a Pt(111) catalyst surface at 573 K in the presence of a polyethylene surrogate melt consisting of C 36 H 74 chains. The smallest and largest endergonic melt phase effects, (∆∆G$^{gas→liq}_{Adsorbate}$), belong to hydrogen (0.045 eV) and butane (1.357 eV). Altogether, we find melt-phase effects are significant and change the activity of transition metal catalysts. Beyond an overall reduced adsorption strength, elementary surface reactions are also affected by the melt phase.

Pt catalysis↗

Calibrating uncertain parameters in melt pool simulations of additive manufacturing

Melt pool scale numerical modeling of additive manufacturing (AM) processes can provide predictive capabilities and theoretical insight into the process-property-structure-performance relationships for AM parts. Despite capabilities of numerical models to solve complex multi-physics problems, it is often important to consider a tradeoff between detailed physics and computational cost. Therefore, sources of uncertainty in both experimental conditions and the parameters needed for modeling require models to be validated against empirical evidence. Here, a method is proposed to calibrate uncertain parameters used in continuum-scale melt pool models for powder bed fusion (PBF) AM. Both a simplified heat transfer model and a heat transfer and fluid flow model were investigated. A surrogate model and Markov chain-based optimization algorithm calibrated melt pool geometry for models within experimental variation of the target melt pool width and depth from the NIST AM-Bench 2018-02 dataset. The melt pool temperature distributions, solidification parameters, and simulated multi-layer solidification microstructures were compared between the two models. Similar results from both models indicate that calibrated, lower fidelity numerical models may be used in place of higher fidelity models to generate melt pool solidification data. Finally, these calibrated models therefore enable lower computational cost melt pool simulations without a noticeable decrease in simulation accuracy for grain-scale microstructure simulations.

36 MATERIALS SCIENCE↗

Experimental study of the partitioning of some platinum group elements (Pd and Ir) between orthopyroxene and silicate melt

Past experiments and observations on natural samples have largely focused on the roles of olivine and chromite in controlling the behaviour of the platinum-group elements (PGE) during melting and solidification, whereas other phases, such as pyroxene, have gone largely uncharacterized. Here, to address this, experiments have been done to measure the partitioning of Pd (with a subset of results for Ir), between orthopyroxene and silicate melt at 1340 °C, 0.1 MPa and log fO 2 of FMQ - 1 to FMQ + 6 (FMQ = Fayalite-Magnetite-Quartz). The X-ray Absorption Near-Edge Structure (XANES) was measured in a subset of experiment glasses. Glass concentrations of Pd (corrected to unit Pd activity) increase from ~6 to ~650 ug/g over the fO 2 range of experiments. The slope of the solubility-fO 2 relation is consistent with Pd 1+ as the dominant oxidation state, with evidence for Pd 0 and Pd 2+ at the lowest and highest experiment fO 2 , respectively. Consistent with this result, the XANES reveal spectral features similar to Pd 0 and Pd 2+ spectral reference materials (specRM) at the most reduced and oxidized synthesis conditions, respectively. Other lines of evidence require the presence of a third melt species, here interpreted to be Pd 1+ . Values of orthopyroxene/melt partition coefficients for Pd (D Pd Opx/melt ) are 0.0051 (+/-0.006) at log fO 2 < ΔFMQ + 3, increasing with fO 2 to a maximum of 0.013 at ~FMQ + 6. Sodium partition coefficients, expected to be similar to Pd, range from 0.0061 (+/-0.00061) at FMQ + 3, increase to 0.007–0.009 at higher fO 2 , but with no clear systematic trend. A value for D Ir Opx-melt of ~0.6 was measured at ~FMQ + 4, indicating significantly more compatible behaviour for Ir relative to Pd. Partitioning results are interpreted in the context of the Blundy-Wood elastic strain model in which the variation in partitioning is related to ionic radius mismatch to an optimal crystallographic site size. Based on the trend in ionic radius with oxidation state, the estimated ionic radius of Pd 1+ in octahedral coordination is similar to Na 1+ , and comparison to previous orthopyroxene-melt partitioning experiments suggests D Pd1+ opx/melt and DNaopx/melt should be nearly identical, consistent with the results of this study. The ionic radius of VI-fold Pd 2+ is close to the optimal M2 site size, so an increased proportion of this species with fO 2 accounts for the larger values of D Pd opx/melt at the highest fO 2 investigated. The much larger partition coefficient for Ir is consistent with the presence of Ir 2+ , whose estimated ionic radius is close to Fe 2+ and Mg 2+ , as well as predictions for the optimal M1 site size. With the assumption that D Pd opx/melt = D Na opx/melt , combined with a revised value for the Pd content of the primitive mantle, a melting model is presented that better reproduces the Pd concentration of high degree melts from sulfide-free mantle sources.

58 GEOSCIENCES↗

Glass length: Workability and meltability of glass as a function of glass melt fragility

Workability and meltability of molten glass are properties important for balancing glass formulation with the design and operations of glass melting and forming facilities. The working and melting “lengths” are the temperature intervals within which glass viscosity allows the melting and forming glass to be performed. They are related to glass melt structure through the glass melt fragility, which, by the augmented Adam-Gibbs equation, is a function of configuration entropy. Both working length and melting length are high for strong glasses and decrease as the melt fragility increases. In this work, analytical formulas are obtained for three-parameter viscosity models VFT, AM, and MYEGA. These models agree with each other and with the Adam-Gibbs equation on the relationship between workability and fragility of glasses but diverge at high-temperatures. The compositional effects on workability and meltability are mediated via the fragility as a function of glass composition expressed in terms of mass and mole component coefficients.

36 MATERIALS SCIENCE↗

Melt-spinnable polyacrylonitrile copolymer precursors for carbon fibers

This paper describes the feasibility of achieving melt-processable polyacrylonitrile copolymer precursors for producing high strength carbon fibers. High molecular weight poly(acrylonitrile-ran-methyl acrylate) (PAN-MA) copolymers with high acrylonitrile content were mixed were various binary melting point modifiers with one component being water to produce systems that formed stable melts at temperatures below the temperature corresponding to the onset of PAN-MA crosslinking. The structure of the copolymer was 96.5 ± 0.13 mol% AN and 4.40 ± 0.13 mol % MA by 1H NMR with an Mw = 238 kDa and polydispersity of 1.9 determined by size exclusion chromatography. A reduction in the Tm of the copolymer of 200 °C was established for one of the copolymer/melting point modifier systems, which corresponds to the greatest reduction in a PAN-based copolymer melting temperature yet reported. From isothermal DSC and pressurized capillary rheometry experiments it was found that the stability of the resulting melts shows a strong temperature dependence, but does not show a strong dependence on shear-rate. Copolymer mixtures consisting of H2O and acetonitrile or adiponitrile were found to be suitable for melt-extrusion at 170 °C with viscosities ranging from 1800 to 2000 Pa*s and stabilities of the melts ≥1 h.

36 MATERIALS SCIENCE↗

High Pressure Melting Curve of Fe‐Si: Implication for the Thermal Properties in Mercury's Core

The motion of liquid iron (Fe) alloy materials in the outer core drives the dynamo, which generates Mercury's magnetic field. The assessment of core models requires laboratory measurements of the melting temperature of Fe alloys at high pressure. Here, we experimentally determined the melting curve of Fe9wt%Si and Fe17wt%Si up to 17 GPa using in situ and ex situ measurements of intermetallic fast diffusion that serves as the melting criterion in a large-volume press. Our determined melting slopes are comparable with previous studies up to about 17 GPa. However, when extrapolated, our melting slopes significantly deviate from previous studies at higher pressures. For Mercury's core with a model composition of Fe9wt%Si, the melting temperature-depth profile determined in our study is lower by ∼150–250 K when compared with theoretical calculations. Using the new melting curve of Fe9wt%Si and the electrical resistivity values from a previous study of Fe8.5wt%Si, we estimate that the electronic thermal conductivity of liquid Fe9wt%Si is 30 Wm −1 K −1 at the Mercury's CMB pressure of 5 GPa and 37 Wm −1 K −1 at an assumed ICB of 21 GPa, corresponding to heat flux values of 23 mWm −2 and 32 mWm −2 , respectively. These values provide new constraints on the core models.

58 GEOSCIENCES↗

Probing the atomic dynamics of ultrafast melting with femtosecond electron diffraction

Melting is an every-day phase transition that is determined by thermodynamic parameters like temperature and pressure. In contrast, ultra-fast melting is governed by the microscopic response to a rapid energy input and, thus, can reveal the strength and dynamics of atomic bonds as well as the energy flow rate to the lattice. Accurately describing these processes remains challenging and requires detailed insights into transient states encountered. Here, we present data from femtosecond electron diffraction measurements that capture the structural evolution of copper during the ultrafast solid-to-liquid phase transformations. At absorbed energy densities 2-4 times the melting threshold, melting begins at the surface slightly below the nominal melting point followed by rapid homogeneous melting throughout the volume. Molecular dynamics simulations reproduce these observations and reveal a weak electron-lattice energy transfer rate for the given experimental conditions. Both simulations and experiments show no indications of rapid lattice collapse when its temperature surpasses proposed limits of superheating, providing evidence that the inherent dynamics limits the speed of disordering in ultrafast melting of metals.

FOS: Physical sciences↗

Two-dimensional non-equilibrium melting of charged colloids

Thermodynamic two-dimensional melting has been extensively studied in experiments and simulations, and is well predicted by theory. For systems in equilibrium, this transition is well described by the Kosterlitz–Thouless–Halperin–Nelson–Young theory, where melting is directly linked to the unbinding of topological defects. For driven, non-equilibrium melting and other non-equilibrium phase transitions, the picture is less clear. Here, in this work, we study the two-dimensional melting of a crystal of charged colloids. By randomly replacing some charged colloids with magnetic colloids, we can melt our system by rotating a fraction of the particles to create non-equilibrium, hydrodynamic random flows and local stresses. We can also melt it thermally by changing the particle number density. We find that an effective temperature approach cannot explain the results of our driven system. Rather, in both experiments and simulations, we observe that plotting the hexatic order parameter and the hexatic correlation’s exponent versus the density of disclinations and dislocations, respectively, yields universal curves. This implies that in our systems, two-dimensional melting depends directly on the density of topological defects and is independent of whether thermal or non-equilibrium forces generate them.

critical phenomena↗

A density functional theory based approach for predicting melting points of ionic liquids

Accurate prediction of melting points of ILs is important both from the fundamental point of view and from the practical perspective for screening ILs with low melting points and broadening their utilization in a wider temperature range. In this work, we present an ab initio approach to calculating melting points of ILs with known crystal structures and illustrate its application for a series of 11 ILs containing imidazolium/pyrrolidinium cations and halide/polyatomic fluoro-containing anions. The melting point is determined as a temperature at which the Gibbs free energy of fusion is zero. The Gibbs free energy of fusion can be expressed through the use of the Born-Fajans-Haber cycle via the lattice free energy of forming a solid IL from gaseous phase ions and the sum of the solvation free energies of ions comprising IL. Dispersion-corrected density functional theory (DFT) involving (semi)local (PBE-D3) and hybrid exchange-correlation (HSE06-D3) functionals is applied to estimate the lattice enthalpy, entropy, and free energy. The ions solvation free energies are calculated with the SMD-generic-IL solvation model at the M06-2X/6-31+G(d) level of theory under standard conditions. The melting points of ILs computed with the HSE06-D3 functional are in good agreement with the experimental data, with a mean absolute error of 30.5 K and a mean relative error of 8.5%. The model is capable of accurately reproducing the trends in melting points upon variation of alkyl substituents in organic cations and replacement one anion by another. The results verify that the lattice energies of ILs containing polyatomic fluoro-containing anions can be approximated reasonably well using the volume-based thermodynamic approach. However, there is no correlation of the computed lattice energies with molecular volume for ILs containing halide anions. Moreover, entropies of solid ILs follow two different linear relationships with molecular volume for halides and polyatomic fluoro-containing anions. As a result, continuous progress in predicting crystal structures of organic salts with halide anions will be a key factor for successful prediction of melting points with no prior knowledge of the crystal structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic clusters triggering nucleation and solidification of the metallic glass melt

The Zr 41 Ti 14 Cu 12.5 Ni 10 Be 22.5 (atomic percent, at. %) melts embedded in a flux of the dehydrated B 2 O 3 were under cooled by the repeated treatment of melting. The maximum melt undercooling of ΔT = 145 K achieved for this melt corresponds to a comparatively large relative undercooling of 0.15 times the melting-point temperature of T m ~ about 953 K( ΔT/T m = 0.15). The solidification and nucleation behaviors of the Zr 41 Ti 14 Cu 12.5 Ni 10 Be 22.5 undercooled melts triggered by Ni, Ti, Cu, and Zr clusters introduced by sputtering these pure metal targets are studied. An anomalous solidification triggered by Zr-atomic clusters above the Zr 41 Ti 14 Cu 12.5 Ni 10 Be 22.5 melting temperature of 140 K is observed. The instability of a metallic-glass (MG) liquid near the thermodynamic critical temperature is present. The nucleation in the undercooled Zr 41 Ti 14 Cu 12.5 Ni 10 Be 22.5 is investigated by Monte Carlo simulations and analyzed by the classical nucleation theory. In conclusion, this letter reveals an effective research method on investigating the instability of a MG liquid near the thermodynamic critical temperature.

74 ATOMIC AND MOLECULAR PHYSICS↗

Melting curves of ice polymorphs in the vicinity of the liquid–liquid critical point

The possible existence of a liquid–liquid critical point in deeply supercooled water has been a subject of debate due to the challenges associated with providing definitive experimental evidence. The pioneering work by Mishima and Stanley [Nature 392, 164–168 (1998)] sought to shed light on this problem by studying the melting curves of different ice polymorphs and their metastable continuation in the vicinity of the expected liquid–liquid transition and its associated critical point. Based on the continuous or discontinuous changes in the slope of the melting curves, Mishima [Phys. Rev. Lett. 85, 334 (2000)] suggested that the liquid–liquid critical point lies between the melting curves of ice III and ice V. Herein we explore this conjecture using molecular dynamics simulations with a machine learning model based on ab initio quantum-mechanical calculations. We study the melting curves of ices III, IV, V, VI, and XIII and find that all of them are supercritical and do not intersect the liquid–liquid transition locus. We also find a pronounced, yet continuous, change in the slope of the melting lines upon crossing of the liquid locus of maximum compressibility. Finally, we analyze the literature in light of our findings and conclude that the scenario in which the melting curves are supercritical is favored by the most recent computational and experimental evidence. Although the preponderance of evidence is consistent with the existence of a second critical point in water, the behavior of ice polymorph melting lines does not provide strong evidence in support of this viewpoint, according to our calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Linking impact melt redox with crustal weathering regime

Abstract Impact melting and outgassing of impact melts were important processes shaping the crust and atmosphere of early Earth and Mars. The redox state of impact melts influences the gases they release, but the controls on impact melt redox are not well understood. Here, we present Fe micro–X-ray absorption near edge structure (μ-XANES) measurements of a suite of impact melt glasses from Lonar crater, India. As an impact into continental flood basalts, Lonar crater is an ideal analog for impacts into basaltic crust on early Earth and Mars. The Fe-μ-XANES technique permits robust characterization of the Fe3+/ΣFe ratio and therefore redox conditions in Lonar glasses. We found a range in Fe3+/ΣFe of 0.21–0.49 among Lonar glasses, including substantial intraclast variations. We conclude that a primary factor driving these variations was pre-impact oxidative weathering of target rocks. The coupling between crustal weathering regime and speciation of gases released from impact melts implies that impact melt outgassing could act as a feedback mechanism to reinforce prevailing surface redox conditions.

Geology↗