Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “slit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

GaAs laser diode pumped Nd:YAG laser

A 1.5-mm by 3-cm neodymium-ion doped YAG laser rod has been side pumped using a GaAs laser diode array tuned to the 8680-A absorption line, achieving a multimode average output power of 120 mW for a total input power of 20 W to the final-stage laser diode drivers. The pumped arrangement was designed to take advantage of the high brightness of a conventional GaAs array as a linear source by introducing the pump light through a slit into a close-wrapped gold coated pump cavity. This cavity forms an integrating chamber for the pump light.

Conant, L. C.↗

Approach guidance for outer planet Pioneer missions

An overall parametric system analysis of the use of an optical approach guidance measurement system (using a V-slit electrooptical 'star-pipper') onboard a Pioneer-type spin-stabilized spacecraft for outer planet missions. Optical measurements of satellites of Saturn and Uranus against the star background are considered. Measurement geometry and spacecraft attitude are evaluated in depth with respect to two Pioneer missions: Saturn-Uranus and Jupiter-Uranus atmospheric entry probe missions with departure from Earth in November/December, 1980. A preliminary evaluation of long-term attitude stability measurements of Pioneer 10 is presented in the Appendix. The major conclusions are: (1) at Saturn flyby, viewing some medium period satellites can provide the best measurement results. (2) At Uranus approach, viewing the planet may give best measurements if early bus-probe separation is required. (3) Final measurement accuracy depends on the data format transmitted to Earth and the applied data interpretation techniques.-

Bejczy, A. K.↗

Comparison of simultaneous CO2 and H2O observations of Venus

Results are reported for 115 pairs of CO2 and H2O abundance determinations made with the coude scanner of a 2.7 m reflector. The pairs of observations were made over the same area of the illuminated disk of Venus with the guiding, seeing and slit-placement errors less than 15 per cent of the disk diameter. A correlation analysis of the pairs of observations grouping them into eight periods of time which corresponded to telescope observing runs or periods of similar phase angle shows a lack of correlation in all except one period. For this set, the H2O abundances were positively correlated with the relative CO2 line strengths for measurements of the 8689-A and 7820-A CO2 bands made on the same day. Comparison of abundances on some 25 individual days shows a positive correlation on one day and a marginal negative correlation on two days, with no correlation on the remaining 22 days. On the basis of the lack of correlations, it is concluded that either the H2O level of line formation does not fluctuate in phase with the observed CO2 absorption fluctuations or the horizontal distribution of the H2O vapor must be inhomogeneous.

Barker, E. S.↗

Multiple-layer printed-wiring trace connector

Nickel-plated spring-steel foil connector is hollow pin, with lengthwise slit, that is inserted into improperly plated-through holes. Edges of connector make positive contact with copper pads within hole.

Pizzeck, D. E.↗

A high-precision CdS photodetector for sun sensor applications

A sun detector developed for the Mariner Jupiter/Saturn mission is described. Redundant photopotentiometers for both pitch and yaw axes, positioned below slit apertures, provide spacecraft stabilization and biased operation over plus or minus 20-deg fields of view. The biased (off-sun) operation is required for pointing the 366-cm-diameter (spacecraft-fixed) radio antenna toward earth. Configuration and fabrication processes are presented, along with a summary of development history. Particular attention is given to the properties of cadmium sulfide as these affect adaptation to this application.

Chamberlain, F. R.↗

Development of an economical silicon solar cell

The growth of electronically viable silicon films on inexpensive foreign substrates is studied, with the objective of creating a technology to radically reduce the overall cost of the silicon employed in photovoltaic solar energy conversion. The approach employed is to enhance crystalline ordering during film nucleation by confining arriving silicon atoms to a narrow band traveling across a substrate, i.e., the Lateral Growth Technique (LGT). The efforts have employed physical vapor deposition of silicon in a vacuum evaporator on glass and metal substrates with both slit masks and single defining edges, and subsequent chemical vapor deposition (CVD) of thicker films on these thin film structures by pyrolysis of silane at higher temperatures.

Lindmayer, J.↗

H2O(+) ions in comets: Comet Kohoutek (1973f) and comet Bradfield (1974b)

The image tube Cassegrain slit spectra of comet Kohoutek and Bradfield calibrated and reduced to relative intensities are discussed. Monochromatic changes in the surface brightness for various neutral and ionized molecules are determined. The intensities of C2 and CN decreased approximately four times faster than the intensity change for the H2O(+) features. It is shown that the excitation mechanism for the observed H2O(+) bands is by fluorescent scattering of the incident solar radiation. The effects of solar activity on the photoionization rate of H2O in a comet are discussed. Observations of another bright comet at the time of maximum solar activity are needed to determine changes in band intensities of comet tail ions due to solar activity.

Wehinger, P.↗

Ion temperatures in HIP-1 and SUMMA from charge-exchange neutral optical emission spectra

Ion temperatures were obtained from observations of the H sub alpha, D sub alpha, and He 587.6 nm lines emitted from hydrogen, deuterium, and helium plasmas in the SUMMA and HIP-1 mirror devices at Lewis Research Center. Steady state discharges were formed by applying a radially inward dc electric field between cylindrical or annular anodes and hollow cathodes located at the peaks of the mirrors. The ion temperatures were found from the Doppler broadening of the charge-exchange components of spectral lines. A statistical method was developed for obtaining scaling relations of ion temperature as a function of current, voltage, and magnetic flux density. Derivations are given that take into account triangular monochromator slit functions, loss cones, and superimposed charge-exchange processes. In addition, the Doppler broadening was found to be sensitive to the influence of drift on charge-exchange cross section. The effects of finite ion-cyclotron radius, cascading, and delayed emission are reviewed.

Patch, R. W.↗

The intensities and profiles of XUV transition zone lines in a quiet sun region compared to a polar coronal hole

The intensities of XUV transition-zone lines from limb spectra of a quiet-sun region and a polar coronal hole are compared. The spectra were obtained with a slit spectrograph on Skylab and cover a region from -12 sec within the limb to 20 sec above it. The lines selected for comparison are formed at temperatures that range from 36,000 to 220,000 K. Lines of the higher-temperature ions, e.g. O v, are significantly less intense in the coronal hole, and lines of lower-temperature ions show little change. Profiles of selected optically thin transition-zone lines from the quiet-sun and coronal-hole spectra are also shown. The lines are broader than expected in ionization equilibrium, and bulk-motion velocities are deduced from the widths of the lines. There appears to be little, if any, statistically significant difference in the velocities obtained from the quiet-sun region and the coronal hole.

Feldman, U.↗

Limb-brightening curves of XUV transition zone lines in the quiet sun and in a polar coronal hole observed from Skylab

Solar limb-brightening curves are discussed for XUV spectral lines formed in the upper chromosphere and transition zone of a quiet region and a polar coronal hole. The spectra were recorded with a slit spectrograph on Skylab. The lines considered are emitted from ions formed within the temperature range from 10,000 to 220,000 K. The limb-brightening curves cover a region from -4 sec within the limb to +20 sec above it. The data from 0 sec to +20 sec are compared with predictions based on both homogeneous and inhomogeneous models of the transition zone. The limb-brightening curve of the O I line at 1355.6 A indicates that O I is formed in spicules. The limb brightening of the He II line at 1640.4 A is consistent with a temperature of formation between about 40,000 and 90,000 K for He II.

Doschek, G. A.↗

Optical and infrared spectrophotometry of 18 Markarian galaxies

Slit spectra, spectrophotometric scans, and infrared broad-band observations are presented for 18 Markarian galaxies with emission lines. Eight of the program galaxies can be classified as Seyfert galaxies. Arguments are given that thermal, nonthermal, and stellar radiation components are present. Broadly speaking, one group of Seyfert galaxies is characterized both by the presence of a high-density region of gas and by a continuum dominated by nonthermal radiation. The continua of the remaining program Seyferts, which do not have a high-density region of gas, are dominated by thermal radiation from dust and a stellar continuum. The 10 galaxies which are not Seyfert galaxies are shown to be examples of extragalactic H II regions; there is evidence for thermal emission from dust being present at 10 microns in four of these galaxies.

Neugebauer, G.↗

Doppler wavelength shifts of transition zone lines measured in Skylab solar spectra

Wavelengths of lines of the transition-zone ions Si IV, C IV, O IV, N V, and O V are observed to be redshifted relative to the wavelengths of chromospheric lines in XUV spectra obtained from the normal-incidence spectrograph on Skylab. The spectra cover the wavelength range from 1200 to 1565 A and were obtained with the slit positioned over chromospheric network and cell regions, on coronal holes, and above the limb. The network-area and coronal-hole spectra were obtained near the disk center. Only some of the spectra show redshifted transition-zone lines. The observed shifts are between 0.03 and 0.08 A, implying velocities of 15 km/s or less. The amount of wavelength shift does not always appear to be the same for lines of different ions. The shifts imply that descending plasma in the solar atmosphere produces more emission than ascending plasma at temperatures between approximately 70,000 and 200,000 K.

Doschek, G. A.↗

The emission-line spectrum above the limb of a solar coronal hole - 1175-1940 A

Emission-line spectra of a coronal hole that coincided with the north pole of the sun are discussed which were obtained with a slit spectrograph aboard Skylab at positions within and above the solar white-light limb in the wavelength range from 1175 to 1940 A. Relative line intensities, line profiles, and full widths at half-maximum are presented for selected chromospheric and transition-zone lines observed above the present polar coronal hole. Average mass motions in the transition zone are determined as a function of electron temperature from the widths of the optically thin lines by assuming ionization equilibrium. The line intensities and profiles are compared with corresponding results deduced from spectra obtained above a quiet solar region. The coronal-hole spectra are found to imply an angular dependence for the source function as well as a radial dependence such that the source function is the smallest at the south pole and increases with decreasing solar latitude.

Feldman, U.↗

Diffraction effects on angular response of X-ray collimators

Angular responses have been measured for X-ray collimators with half-widths ranging from minutes of arc down to 10 arcsec. In the seconds-of-arc range, diffraction peaks at off-axis angles can masquerade as side lobes of the collimator angular response. Measurements and qualitative physical arguments lead to a rule of thumb for collimator design; namely, the angle of first minimum in the Fraunhofer single-slit diffraction pattern should be less than one-fourth of the collimator geometrical full-width at half-maximum intensity.

Blake, R. L.↗

High intensity solar irradiation testing of UV optics

The Orbiting Solar Observatory-I (OSO-8 in orbit) incorporates two high resolution solar pointing spectrometers operating from 1000 A to 4000 A. Energy from the sun enters a Cassegrainian telescope and is focused on a slit while the solar disk is scanned to one arc-second resolution. The stability of the secondary mirrors reflectance was of concern since they would be exposed to intense focused solar energy up to 27 suns. A test program was initiated to simulate this energy input on sample UV mirrors of the MgF2 and LiF types and to evaluate their performance after irradiation. Tests were conducted to simulate the solar spectrum at high intensities (25 suns) and at a single wavelength near Lyman-alpha, but with twenty times the solar intensity at Lyman-alpha. Post-test measurements after every exposure were made at wavelengths from 1025 A to 1849 A. After 75 simulated 'orbits', reflectance changes due to temperature effects were noted to be less than 10%. Reductions in reflectance under high intensity solar radiation were generally greater than 10%. Polymerization of surface contaminations on the LiF mirrors reduced reflectances at short wavelengths by 40%.

Greyerbiehl, J. M.↗

Limb brightening on Uranus - The visible spectrum

Results are presented for pinhole and slit narrowband photoelectric area-scanning photometry of the Uranus disk at eight central wavelengths ranging from 5600 to 7500 A. The observations were undertaken to detect limb brightening on the planet and to study the nature of its disk profile as a function of geometrical albedo. A coarse analysis of the results shows that the disk must exhibit limb brightening in the two CH4 bands at 6190 and 7300 A relative to all other wavebands investigated. Except for the two CH4 bands, the shapes and widths of the images are found to be essentially identical; point-spread-function data for all wavebands indicate no significant variation in the representative Gaussian l/e width with wavelength. A fine analysis of the data reveals absolute limb brightening in the 7300-A CH4 band and absolute limb darkening in the adjacent wavebands. These results are shown to be consistent with the hypothesis that clouds are absent from the visible atmosphere of Uranus.

Price, M. J.↗

A study of damage zones or characteristic lengths as related to the fracture behavior of graphite/epoxy laminates

Uniaxial tensile tests conducted on a variety of graphite/epoxy laminates, containing narrow rectangular slits, square or circular holes with various aspect ratios are discussed. The techniques used to study stable crack or damage zone growth--namely, birefringence coatings, COD gages, and microscopic observations are discussed. Initial and final fracture modes are discussed as well as the effect of notch size and shape, and laminate type on the fracture process. Characteristic lengths are calculated and compared to each other using the point, average and inherent flaw theories. Fracture toughnesses are calculated by the same theories and compared to a boundary integral equation technique. Finite width K-calibration factors are also discussed.

Yeow, Y. T.↗

Surface charge kinetics near metal-dielectric interfaces exposed to kilovolt electron flux

Interfaces between dielectric films and grounded metallic boundaries were exposed, in vacuum, to monoenergic electron fluxes having energies up to 22 keV. Two principal concerns were the measuring of the charge distributions on dielectrics and the determining of causes of flashovers, events where dielectric surface charges abruptly transfer to the metallic structures. Surface charges are perturbed within 10 mm of interfaces. Perturbations are relatively small except within about 3 mm of the interface. The probability of flashover was found to be related to microscopic imperfections in the interfaces. As flashovers occur in an exposed metal substrate, points become burned into the dielectric along the slit. As these points develop, the probability of flashover increases greatly. An interface which is highly immune to flashover was formed by covering a dielectric film with a 1.5-mm-thick aperture plate which exposes the film through a machined opening.

Robinson, J. W.↗