Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “charge distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

The MUSE beamline calorimeter

The MUon Scattering Experiment (MUSE) was motivated by the proton radius puzzle arising from the discrepancy between muonic hydrogen spectroscopy and electron–proton measurements. The MUSE physics goals also include testing lepton universality, precisely measuring two-photon exchange contribution, and testing radiative corrections. MUSE addresses these physics goals through simultaneous measurement of high precision cross sections for electron–proton and muon–proton scattering using a mixed-species beam. The experiment will run at both positive and negative beam polarities. Measuring precise cross sections requires understanding both the incident beam energy and the radiative corrections. For this purpose, a lead-glass calorimeter was installed at the end of the beam line in the MUSE detector system. Here, in this article, we discuss the detector specifications, calibration and performance. We demonstrate that the detector performance is well reproduced by simulation, and meets experimental requirements.

Calorimeter↗
DOE OSTI2023

Two-particle azimuthal correlations in γp interactions using pPb collisions at s NN = 8.16 TeV

The first measurements of the Fourier coefficients ( V n Δ ) of the azimuthal distributions of charged hadrons emitted from photon-proton (γp) interactions are presented. The data are extracted from 68.8 nb −1 of ultra-peripheral proton-lead (pPb) collisions at s NN = 8.16 TeV using the CMS detector. The high energy lead ions produce a flux of photons that can interact with the oncoming proton. This γp system provides a set of unique initial conditions with multiplicity lower than in photon-lead collisions but comparable to recent electron-positron and electron-proton data. The V n Δ coefficients are presented in ranges of event multiplicity and transverse momentum ( p T ) and are compared to corresponding hadronic minimum bias pPb results. For a given multiplicity range, the mean p T of charged particles is smaller in γp than in pPb collisions. For both the γp and pPb samples, V 1 Δ is negative, V 2 Δ is positive, and V 3 Δ consistent with 0. For each multiplicity and p T range, V 2 Δ is larger for γp events. The γp data are consistent with model predictions that have no collective effects.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Investigation of post-injection strategies for diesel engine Catalyst Heating Operation using a vapor-liquid-equilibrium-based spray model

Most multidimensional engine simulations spend much time solving for non-equilibrium spray dynamics (atomization, collision, vaporization). However, their accuracy is limited by significant grid dependency, and the need for extensive calibration. This is critical for modeling cold-start diesel fuel post injections, which occur at low temperatures and pressures, far from typical model validation ranges. At the same time, resolving micron-scale spray phenomena would render full Eulerian multiphase calculations prohibitive. In this study, an improved phase equilibrium based approach was implemented and assessed for simulating diesel catalyst heating operation strategies. A phase equilibrium solver based on the model by Yue and Reitz [1] was implemented: a fully multiphase CFD solver is employed with an engineering-size engine grid, and fuel injection is modeled using the standard Lagrangian parcels approach. Mass and energy from the liquid parcels are released to the Eulerian multiphase mixture according to an equilibrium-based liquid jet model. An improved phase equilibrium solver was developed to handle large real-gas mixtures such as those from accurate chemical kinetics mechanisms. The liquid-jet model was improved such that momentum transfer to the Eulerian solver better reproduces the physical spray jet structure. Validation of liquid/vapor penetration predictions showed that the model yields accurate results with very limited tuning and low sensitivity to the few calibration constants. In-cylinder simulations of diesel catalyst heating operation strategies showed that capturing spray structure is paramount when short, transient injection pulses and low temperatures are present. Furthermore, the EP model provides improved predictions of post-injection spray structure and ignitability, while conventional spray modeling does not capture the increase of liquid penetration during the expansion stroke. Finally, the only important EP model calibration constant, Cliq, does not affect momentum transfer, but it changes the local charge cooling distribution through the local energy transfer, which makes it candidate to additional research. The results confirm that non-equilibrium spray processes do not need to be resolved in engineering simulations of high-pressure diesel sprays.

42 ENGINEERING↗
DOE OSTI2023

Accelerating Quantum Materials Development with Advances in Transmission Electron Microscopy

Quantum materials are driving a technology revolution in sensing, communication, and computing, while simultaneously testing many core theories of the past century. Materials such as topological insulators, complex oxides, superconductors, quantum dots, color center-hosting semiconductors, and other types of strongly correlated materials can exhibit exotic properties such as edge conductivity, multiferroicity, magnetoresistance, superconductivity, single photon emission, and optical-spin locking. These emergent properties arise and depend strongly on the material’s detailed atomic-scale structure, including atomic defects, dopants, and lattice stacking. In this review, we describe how progress in the field of electron microscopy (EM), including in situ and in operando EM, can accelerate advances in quantum materials and quantum excitations. We begin by describing fundamental EM principles and operation modes. We then discuss various EM methods such as (i) EM spectroscopies, including electron energy loss spectroscopy (EELS), cathodoluminescence (CL), and electron energy gain spectroscopy (EEGS); (ii) four-dimensional scanning transmission electron microscopy (4D-STEM); (iii) dynamic and ultrafast EM (UEM); (iv) complementary ultrafast spectroscopies (UED, XFEL); and (v) atomic electron tomography (AET). We describe how these methods could inform structure–function relations in quantum materials down to the picometer scale and femtosecond time resolution, and how they enable precision positioning of atomic defects and high-resolution manipulation of quantum materials. For each method, we also describe existing limitations to solve open quantum mechanical questions, and how they might be addressed to accelerate progress. Among numerous notable results, our review highlights how EM is enabling identification of the 3D structure of quantum defects; measuring reversible and metastable dynamics of quantum excitations; mapping exciton states and single photon emission; measuring nanoscale thermal transport and coupled excitation dynamics; and measuring the internal electric field and charge density distribution of quantum heterointerfaces- all at the quantum materials’ intrinsic atomic and near atomic-length scale. Finally, we conclude by describing open challenges for the future, including achieving stable sample holders for ultralow temperature (below 10K) atomic-scale spatial resolution, stable spectrometers that enable meV energy resolution, and high-resolution, dynamic mapping of magnetic and spin fields. With atomic manipulation and ultrafast characterization enabled by EM, quantum materials will be poised to integrate into many of the sustainable and energy-efficient technologies needed for the 21st century.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Density Functional Theory Study of the Adsorption and Dissociation of Copper(I) Acetamidinates on Ni(110): The Effect of the Substrate

In order to assess the role of a metal substrates on the thermal chemistry of adsorbed acetamidinate metalorganic compounds, we have studied the surface chemistry of copper(I)–N,N'-dimethylacetamidinate on Ni(110) using density functional theory and contrasted it with similar calculations we previously carried out on Cu(110). At low coverages, it was found that, in its most stable configuration, the molecular adsorption of copper(I)–N,N'-dimethylacetamidinate dimers occurs with the Cu atoms occupying surface hollow sites. In this work, the ligands reorient away from those metal centers, and the N atoms develop new direct bonds with surface Ni atoms. However, this configuration is not stable and decomposes by losing both ligands to the surface. In the final state, the two ligands bind via their N atoms to Ni sites one lattice space away from the sites where the Cu atoms remain, with their molecular planes perpendicular to that of the surface. This is in contrast with what happens in the case of adsorption on Cu(110), where the Cu atoms from the metalorganic complex still occupy hollow sites but where only one of the ligands breaks away and binds directly to the surface; the other remains on top of the two Cu ions. In terms of the energetics of adsorption and decomposition, the reactions on Ni(110) are much more exothermic than on Cu(110). Further analysis of the distribution of charge within the adsorbates shows a minor reduction of the Cu atoms of the dimer upon interaction with the surface; full reduction to metallic copper is complete only when both ligands have fully migrated to their new Ni surface sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Tuning the Placement of Pt “Single Atoms” on a Mixed CeO 2 –TiO 2 Support

Defect sites on the oxide supports can be used to anchor and activate "single-atoms" catalysts (SACs). By engineering the anchoring sites for supporting SACs, one can alter their electronic and atomic structures which, in turn, define their activity, selectivity, and stability for catalytic reactions. To create and tune unique sites for Pt SACs on CeO 2 support, in this work, we synthesized a system consisting of CeO 2 decorated on TiO 2 nano-oxides for supporting the Pt SACs and investigated the effect of Pt weight loading. Here, a combination of multiple structural characterization methods including diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) were employed to characterize the distribution of charge states of single atoms and evaluate the heterogeneity of their binding sites. We have found that the placement of Pt atoms can be tuned on a mixed oxide surface by changing the weight loading of Pt.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Spatial Mapping of Electrostatic Fields in 2D Heterostructures

In situ electron microscopy is an effective tool for understanding the mechanisms driving novel phenomena in 2D structures. However, due to practical challenges, it is difficult to address these technologically relevant 2D heterostructures with electron microscopy. Here, we use the differential phase contrast (DPC) imaging technique to build a methodology for probing local electrostatic fields during electrical operation with nanoscale spatial resolution in such materials. We find that, by combining a traditional DPC setup with a high-pass filter, we can largely eliminate electric fluctuations emanating from short-range atomic potentials. Using a method based on this filtering algorithm, a priori electric field expectations can be directly compared with experimentally derived values to readily identify inhomogeneities and potentially problematic regions. Furthermore, we use this platform to analyze the electric field and charge density distribution across layers of hBN and MoS 2 .

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Atomic-Scale Scanning of Domain Network in the Ferroelectric HfO 2 Thin Film

Ferroelectric HfO 2 -based thin films have attracted much interest in the utilization of ferroelectricity at the nanoscale for next-generation electronic devices. However, the structural origin and stabilization mechanism of the ferroelectric phase are not understood because the film is typically nanocrystalline with active yet stochastic ferroelectric domains. Here, in this study, electron microscopy is used to map the in-plane domain network structures of epitaxially grown ferroelectric Y:HfO 2 films in atomic resolution. The ferroelectricity is confirmed in free-standing Y:HfO 2 films, allowing for investigating the structural origin for their ferroelectricity by 4D-STEM, high-resolution STEM, and iDPC-STEM. At the grain boundaries of <111>-oriented Pca2 1 orthorhombic grains, a high-symmetry mixed-(R3m, Pnm2 1 ) phase is induced, exhibiting enhanced polarization due to in-plane compressive strain. Nanoscale Pca2 1 orthorhombic grains and their grain boundaries with mixed-(R3m, Pnm2 1 ) phases of higher symmetry cooperatively determine the ferroelectricity of the Y:HfO 2 film. It is also found that such ferroelectric domain networks emerge when the film thickness is beyond a finite value. Furthermore, in-plane mapping of oxygen positions overlaid on ferroelectric domains discloses that polarization is suppressed at vertical domain walls, while it is active when domains are aligned horizontally with subangstrom domain walls. In addition, randomly distributed 180° charged domain walls are confined by spacer layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Spray Mechanism of Contained-Electrospray Ionization

Analytical characteristics of contained electrospray ionization (ESI) are summarized in terms of its potential to modify the analyte solution during the stages of droplet formation to provide opportunities to generate native versus denatured biomolecular gas-phase ions, without the need for bulk-phase analyte modifications. The real-time modification of the charged microdroplets occurs in a cavity that is included in the outlet of the contained-ESI ion source. Close examination of the inside of the cavity using a high-speed camera revealed the formation of discrete droplets as well as thin liquid films in the droplets wake. When operated at 20 psi N2 pressure, the droplets were observed to move at an average speed of 8 mm/s providing ~1 s mixing time in a 10 mm cavity length. Evidence is provided for the presence of highly reactive charged droplets based on myoglobin charge state distribution, apo-myoglobin contents, and ion mobility drift time profiles under different spray conditions. Mechanistic insights for the capture of vapor-phase reagents and droplet dynamics as influenced by different operational modes are also described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Iodine orbital moment and chromium anisotropy contributions to CrI 3 magnetism

The recent discovery of two-dimensional (2D) magnets, with a number of interesting magnetic properties, has drawn much interest due to their potential for future 2D spintronic device applications. CrI 3 , a van der Waals magnet, exhibits two-dimensional ferromagnetism even in monolayer form, stabilized by strong magnetic anisotropy. Its interlayer magnetic ordering is coupled to structural layer stacking, implying that the charge density distribution mediating van der Waals interactions plays a key role in the magnetic interaction between the layers. Using polarization-dependent x-ray spectroscopy, we investigated the response of the electronic environment around Cr and I sites to structural changes of layer stacking order. The highly anisotropic nature of the Cr local environment is significantly enhanced and is accompanied by changes in the valence band, in the rhombohedral phase. Magnetic spectroscopy measurements reveal a sizable iodine orbital moment, indicating the iodine contribution to magnetic anisotropy. Finally, our results uncover an important role for the extended nature of anisotropic Cr orbital states in dictating interlayer magnetic interactions and the iodine contribution to magnetic anisotropy.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Quantifying leakage fields at ionic grain boundaries using off-axis electron holography

The electrical properties of interfaces in semiconductors and ionic conductors are immensely important in a wide range of applications. Electron holography is ideally suited for the direct measurement of the electrostatic potential of such interfaces. A key challenge with this approach is the contribution of the leakage field from the sample to the observed electron phase shift. This leakage field cannot be a priori independently determined and can cause an overestimation of the phase shift. In this work, we use finite element simulations to compute the three-dimensional electrostatic potential in the vicinity of an interface associated with a given interfacial charge density distribution. We then evaluate the predicted phase shift and demonstrate that the leakage field strongly affects the recovery of the projected interface potential. From the difference between the true potential and uncorrected, recovered potential, we propose a method to correct for this effect. We then demonstrate the application of this methodology to the analysis of experimental off-axis electron holography data acquired from the grain boundaries in lightly doped ceria.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Lower hybrid drift instability in nonthermal plasmas

Lower hybrid drift instability (LHDI) is driven by the cross-field current and operates in the vicinity of the lower-hybrid frequency, between the ion- and electron-gyro frequencies, and with wavelengths between the electron and ion thermal gyro radii. The free energy source that drives this instability resides in the density gradient associated with an inhomogeneous plasma. The existing literature on LHDI assumes that the charged particle distribution function is given by a Maxwellian form, but the space plasma is pervasively observed to feature nonthermal characteristics. This paper extends the theory of LHDI to nonthermal plasmas. The generalized theory of LHDI is, thus, applicable to various space plasma environments characterized by nonthermal plasma velocity distribution functions.

Arya, Neetasha (ORCID:0009000236075605)↗
DOE OSTI2026

Commissioning of an MPGD-based Drift Chamber for Heavy-ion Tracking in FRIB's Sweeper magnet system

A newly developed drift chamber equipped with an innovative hybrid Micro-Pattern Gaseous Detector based readout was commissioned at FRIB. The detector consists of a Multi-layer Thick Gas Electron Multiplier (M-THGEM) mounted over a high-granularity, position-sensitive readout board. Denoted as the Micro-Pattern Drift Chamber (MPDC), the new device is used to provide tracking capability as part of the detectors of the Sweeper magnet system for neutron-invariant-mass spectrometry at the Facility for Rare Isotope Beams (FRIB). The localization of impinging ions in a 30 × 30 cm 2 drift area is derived by processing the charge-avalanche distribution induced on the segmented readout board. The signals induced on the readout pads are processed by a compact, multi-channel Data Acquisition System (DAQ) based on the Scalable Readout System (SRS). To facilitate synchronization with other detector systems of the Sweeper magnet system, the SRS has been configured to accept an external trigger.

Gaseous detectors↗
DOE OSTI2026

Ultrafast x-ray imaging of coherently controlled molecular dynamics in real space and time

Coherent control aims to manipulate chemical processes on the latent length and timescales of atoms and bonds, scales that are intrinsic to molecular dynamics but not directly resolved by most experimental probes. As a result, existing coherent-control experiments, which overwhelmingly rely on spectroscopic observables, leave a crucial blind spot: the direct, real-space recovery of all atomic and molecular rearrangements in response to coherently controlled excitations. Here, we overcome this limitation by integrating a Tannor-Kosloff-Rice pump-control-probe scheme with ultrafast X-ray scattering to capture snapshots of the wavepacket motion in a benchmark molecular system. We demonstrate this by photoexciting diatomic iodine vapor with a visible pump pulse, selectively steering the wavepacket toward ground-state recombination or dissociative pathways with a time-delayed near-IR control pulse, and recording the dynamics with angstrom and femtosecond precision with an ultrashort hard X-ray probe pulse. By comparing these structural observations with numerical solutions of the time-dependent Schrödinger equation, we reveal how coherent control actively reshapes the molecular charge density distribution. Our results pave the way for leveraging structural feedback as a control handle and provide a fundamental microscopic visualization of quantum decoherence and energy redistribution at the atomic level.

Hopper, Thomas R. [SLAC National Accelerator Labor↗
DOE OSTI2025

Reduction in Nuclear Size and Quadrupole Deformation of High-Spin Isomers of 127,129 In

We employed laser spectroscopy of atomic transitions to measure the nuclear charge radii and electromagnetic properties of the high-spin isomeric states in neutron-rich indium isotopes (𝑍 =49) near the closed proton and neutron shells at 𝑍 = 50 and 𝑁 = 82. Our data reveal a reduction in the nuclear charge radius and intrinsic quadrupole moment when protons and neutrons are fully aligned in 129 In ⁢(𝑁 = 80), to form the high spin isomer. Such a reduction is not observed in 127 In ⁢(𝑁 = 78), where more complex configurations can be formed by the existence of four neutron holes. These observations are not consistently described by nuclear theory.

high spin states↗
DOE OSTI2020

Effects of lithium intercalation in twisted bilayer graphene

In this work, we investigate the effects of lithium intercalation in twisted bilayers of graphene, using first-principles electronic structure calculations. To model this system we employ commensurate supercells that correspond to twist angles of 7.34° and 2.45°. From the energetics of lithium absorption we demonstrate that for low Li concentration the intercalants cluster in the AA regions with double the density of a uniform distribution. The charge donated by the Li atoms to the graphene layers results in modifications to the band structure that can be qualitatively captured using a continuum model with modified interlayer couplings in a region of parameter space that has yet to be explored either experimentally or theoretically. Thus, the combination of intercalation and twisted layers simultaneously provides the means for spatial control over material properties and an additional knob with which to tune moiré physics in twisted bilayers of graphene, with potential applications ranging from energy storage and conversion to quantum information.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗