SEARCH · Engineering Papers

Results for “ULTIMATE STRENGTH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Mechanics of the Ring Tension Test (RTT): A Finite Element-based Investigation

The ring tension test (RTT) is an experimental method for determining mechanical behavior in a material’s circumferential or hoop direction. It is a crucial test for testing anisotropic materials with tube geometry, such as nuclear fuel cladding or irradiated pipes. Several RTT configurations exist, each with their own advantages and disadvantages. However, this test is significantly more complex than traditional tensile testing and can be especially sensitive to small differences and inconsistencies in the test setup and geometry, ultimately affecting the derived mechanical properties. Previous research has focused on method development, and little work has been done on understanding the subtle differences between an ideal test and experiments, specifically when the tests are performed on highly irradiated materials in hot cells. In this work, a finite element-based investigation of the RTT is conducted. Two promising test configurations are investigated, comparing their ability to determine accurate material strengths through plastic deformation. Several non-ideal conditions and uncontrollable effects which are likely to occur during experimental testing such as machining tolerances, variations of specimen geometry from nominal dimensions, rotation of specimens and fixturing, and other test setup discrepancies are studied. The sensitivity of measured strengths to these conditions is presented. A mechanics-based approach to describing and correcting raw data to determine actual strengths is also included for one of the configurations, resulting in a robust correction method with highly accurate material strength measurements. Based on these analyses, the hemicylindrical mandrel configuration is recommended with a gauge region oriented at a 45° angle.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2021

Micromundos biominerales en las algas rojas

Coralline algae (rhodophyta) populate vast pinkish colour regions of the coast. If you step on them in your bare feet, they might hurt you, because they are hard and sharp. Many organisms find shelter and develop within their tiny branches. Photosynthesis of coralline algae conducts the formation of carbonates that exhibit a fascinating architecture. The alga and its associated microorganisms (microbiota) participate in the formation of these minerals, that accumulate and cement the materials that ultimately shape beaches and coastal lines. Carbonates are susceptible to acid-base chemistry; thus, their structural stability and their dissolution depend on the pH of the surrounding environment. Therefore, these biominerals and the marine organisms that build them (such as algae, corals, mollusks or equinoderms) are vulnerable to ocean acidification. By trying to see beyond our eyesight, we were able to understand that algal branches hide an amazing structural strength, where its microstructure and chemistry play a major role. We found minerals with a vast structural and thermal stability in the algal body, named algal thallus. Currently, basic science explores coralline red and green algae as interesting models to understand carbon sequestration in stable structures. Therefore, this research might inspire the development of technologies to mitigate climate change.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Controlled Pyrolysis: A Robust Scalable Composite Recycling Technology

The reinforced composites industry is facing significant challenges in handling the scrap composite material from automobile manufacturing, the wind turbine industry, and others. The fibers in the material, whether they be carbon, glass, or other materials have commercial value if they can be recovered successfully. Successfully means the fibers are clean with no sizing or other binders and have adequate strength and physical properties that would allow them to be economically reprocessed into valuable product. The composites recycling project was an industry-collaborative effort to develop a composite recycling technology using controlled pyrolysis. Through the recycling of scrap and end-of-life (EOL) cured composite materials, this pilot study was intended to create a business case by realizing a cost-effective means for recycling EOL and production scrap composite materials, ultimately reducing the volume of composite materials destined for landfill. The project was led by the Institute for Advanced Composites Manufacturing Innovation (IACMI), the American Composites Manufacturers Association (ACMA), Oak Ridge National Laboratory (ORNL), Continental Structural Plastics (CSP) a Teijin Group Company, CHZ Technologies, and A. Schulman with support from Owens Corning, John Deere, General Electric (GE), Ashland LLC, and Plastics Europe (CEFIC). The team studied and tested CHZ Technologies’ controlled pyrolysis system, known as the Thermolyzer TM , which operates on a scalable basis to convert organic polymer materials into a clean synthesis gas and char containing the recoverable carbon and glass fiber reinforcement. The recoverable energy contained in the input polymers creates the synthesis gas that can be used to provide heat to the Thermolyzer TM primary reactor in a sustainable manner. That is, once the Thermolyzer TM is started with a small amount of external natural gas, the synthesis gas that is created from the polymers will continue to operate the burners so long as feedstock is supplied. The reinforcing fiber materials remaining in the solid phase char were separated and cleaned for re-use in other polymer systems based on the retained properties of the fibers. The study created reports (attached in the appendix) on the Mass and Energy Balances, syngas analytics, VOC assessment, yield analysis and other analytics necessary for a Techno-Economic Analysis (TEA) to quantify the economic impact of the recovery and sustainable re-use of the carbon and glass fibers. The process consisted of 4 steps: Selection of 4 samples of cured composite waste materials from project partners interested in materials recycling and recovering the reinforcing fibers for best case re-use. The materials included glass fiber (GF) polyester/vinyl ester automotive SMC from CSP, GF epoxy balsa/PVC foam wind blades from GE, carbon fiber (CF) epoxy wind blade laminated spar caps from GE, and GF/CF epoxy hybrid assembly from John Deere. Processing the waste composite samples into 1-2” shreds. Packaging the shredded composites into bulk sacks on international shipping pallets for shipment to KUG in Forst (Lausitz), Germany. Pyrolysis of the shredded composites under controlled conditions designed for each polymer system. Collecting samples of the gas and char for analysis. Shipping the char containing the CF/GF back to the US for the next steps of testing the fibers and developing protocols for sustainable re-use of the fibers in composite applications.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Case Study: Calorimetry

This chapter presents the use of adsorption microcalorimetry to study acid-base catalysis over mixed metal oxides. Understanding the acid-base properties of catalysts is of paramount importance for steering product selectivity in a wide variety of catalytic industrial processes. In particular, catalytic conversion of biomass into biofuels and chemicals demands comprehensive understanding of the acid-base properties of the catalyst to selectively convert functional groups. Herein, the use of probe molecules to measure the strength and density of acid and basic sites on mixed metal oxide surfaces is introduced. Further, the challenges when characterizing mixed metal oxides, presenting surface reconstruction, are explained. An example displays how combining adsorption calorimetry with ab initio calculations explains the activation of a reactant on the surface of a mixed metal oxide. Acid-base catalysis over nanoshapes is studied to unveil that different nanoshapes lead to different extents of surface reconstruction, which ultimately affect acid-base catalysis. The use of steady-state isotopic transient kinetic analysis (SSITKA), in combination with adsorption microcalorimetry, unveils that surface reconstruction of a set of perovskites impacts the density of active sites to a greater extent than the intrinsic reactivity of the active site. At the end of this chapter, fundamental insights into catalyst transient behavior during isomerization of n-butane, and the reaction mechanism for conversion of 4-methylpentan-2-ol, are presented.

Polo Garzon, Felipe↗

DOE OSTI2023

Classification of Adsorbed Hydrocarbons Based on Bonding Configurations of the Adsorbates and Surface Site Stabilities

The design of heterogeneous catalysts can be accelerated by identifying relevant descriptors that accurately and effectively link the binding and activation energies to reactivity. Herein, we investigated scaling relations between binding energies of various hydrocarbon-based adsorbates on three different Pt surfaces and metal binding energies estimated via the recently developed α-scheme model. In this study, we find that the scaling slopes are similar for certain groups of adsorbates, which then can be classified based on their spatial and electronic structure enabling fast description of binding strengths for each member of the class. Hence, our findings show that the binding energies of simple hydrocarbons CH x , x = {0,1,2,3,4}, and CHCH 2 can be used to identify the binding energies of more complex hydrocarbon-based adsorbates. We introduce this classification to establish a generalizable scheme in which complex hydrogenation/dehydrogenation processes of higher hydrocarbons can be predicted via the binding energies of simpler hydrocarbon-based species and ultimately through surface site stabilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Muon-induced fission of actinide nuclei

A negative muon captured by an actinide cascades down through the muonic atomic levels; deeply bound transitions can proceed via inverse internal conversion, depositing the muonic transition energy directly into the nucleus and, when the deposited energy exceeds the fission barrier, inducing prompt fission. Because the muon mean lifetime exceeds the saddle-to-scission timescale by orders of magnitude, the muon can survive the entire fission event as a 1⁢𝑠 spectator and ultimately attach to one or both of the emerging fragments. Its postscission attachment probability to the light fragment, 𝑃 𝐿 , can be used as a direct electromagnetic probe of fission dynamics on a timescale of 10 −21 s. In previous work, we introduced a three-dimensional lattice solution of the time-dependent Dirac equation coupled to the electromagnetic field generated by a fissioning nucleus and reported 𝑃 𝐿 for several actinides at a single dissipation strength. In this work, we extend that framework to a systematic survey of 232 Th , 238 U , and 240 Pu and implement a more realistic fission model which incorporates dynamic pairing correlations. We find that 𝑃 𝐿 falls steeply with the fragment charge asymmetry, a robust structural fingerprint of the fissioning system, while its dependence on nuclear dissipation is secondary and sensitive to the phenomenological friction prescription. These results establish 𝑃 𝐿 as a clean electromagnetic probe of fragment charge asymmetry and motivate a self-consistent, coordinate- and time-dependent treatment of nuclear dissipation as the natural next step.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2025

A multi-model assessment of global freshwater temperature and thermoelectric power supply under climate change

Water temperature is a key abiotic factor influencing aquatic ecosystem health and the services provided to both nature and humans. Global water temperature models offer possibilities to improve our understanding of water temperature regimes, which is increasingly important against the backdrop of climate change. Yet, existing studies have predominantly relied on a single model, which can lead to an incomplete representation of uncertainty and potential biases, in addition to limited insight into the range of possible future conditions, which ultimately reduces the robustness of climate impact assessments. Here, we provide a comprehensive assessment of surface freshwater temperature changes from various river and lake models for both past conditions and under future scenarios of climate change. Global models consistently simulate that surface water temperatures are currently 0.5 °C–0.8 °C higher than at the turn of the century (i.e. 1981–2000), and that warming will extend and intensify with future global change throughout the 21st century. While the strength of warming is highly sensitive to the different water temperature models, emissions scenarios and global climate models, our multi-model ensemble shows a global average annual water temperature rise of between +1.3 °C and +4.1 °C by the end of the century. To illustrate a potential societal impact of our results, we evaluate how future changes in discharge and water temperature may affect existing thermoelectric power plants, estimating average annual reductions of 1.5%–6% in global usable capacity by the end of the century. However, with river water temperatures projected to exhibit more pronounced seasonal patterns in the future—especially under the more extreme climate change scenarios and during summer months in the Northern Hemisphere—intra-annual reductions in usable capacity can be much more severe. Given the challenges associated with (large-scale) adaptation to control water temperature regimes, strong climate change mitigation is crucial for minimising water temperature rises and its associated negative impacts on humankind and ecosystems.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2025

Development of Niobium-based alloys for Turbine Applications: 20/CJ000/08/09 (ULTIMATE Phase I project)

36 MATERIALS SCIENCE↗

DOE OSTI2024

Final CRADA Report – NFE-21-08693

TAE Technologies is developing a magnetic fusion energy concept known as the beam-driven field-reversed configuration (FRC) with the ultimate goal of developing a reactor for commercial electricity production capable of burning aneutronic pB11 fuel. To achieve the high plasma temperatures this requires, auxiliary radiofrequency (RF) heating will likely be needed. High Harmonic Fast Wave (HHFW) heating has been identified as a candidate RF heating scheme to overcome the unique challenges posed to RF heating by the FRC, including the large distance from the plasma edge to the last closed flux surface and a magnetic field profile with strength decreasing from edge to core and reversing sign at a null point inside the plasma. The purpose of this project was to develop the experimental capabilities to test HHFW on TAE’s C-2W device through the design of a phased array antenna and accompanying matching network. The design was performed by ORNL and informed by experiments with a prototype four-strap phased antenna-array that was manufactured and installed on the LArge Plasma Device (LAPD) at UCLA and simulations conducted with the Petra-M code under the purview of a previous INFUSE grant. The ORNL team completed the conceptual design of the antenna and matching network which was then handed off to the TAE Mechanical Design team. The design was then iterated on to ensure changes to the mechanical design did not interfere with the RF performance. This process is now complete, and, with mechanical design in hand, TAE is proceeding with plans for final integration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Laser Powder Bed Fusion Additive Manufacture Nb1Zr Development

Next generation fission and fusion nuclear reactors require materials that can withstand operating temperatures greater than 500 °C, neutron irradiation doses of up to 200 displacements per atom (dpa), and potentially corrosive coolants such as the alkali liquid metals sodium, lithium, and NaK (Na33K eutectic alloy). Refractory alloys, such as Nb1Zr (Nb-1wt%Zr) and Molybdenum alloy TZM (Mo-0.5wt%Ti-0.08wt%Zr) have been traditionally considered viable candidates for advanced fission and fusion reactor concepts. However, it is relatively difficult to generate complex geometries of interest from these alloys using traditional manufacturing methods. In addition, there needs to be a concentrated effort to address refractory metal challenges at elevated temperature operation. In order to generate complex geometries of interest, modern manufacturing techniques are considered to increase the technological readiness level (TRL), cost-effectiveness, and schedule savings. This work focused on the continued development of laser powder bed fusion (L-PBF) additive manufacturing (AM) to improve both design flexibility, evaluate microstructure and properties, and ultimately accelerate the TRL and qualification of these processes and alloys for components to potentially be put into service. Niobium alloy Nb1Zr was identified through a down-selection process outlined in previous reports as a candidate to develop in L-PBF AM. Historically, Nb1Zr had been explored for high temperature fast spectrum fission reactors for both terrestrial and space applications. Molybdenum alloy TZM has also been considered for these reactor concepts due to exceptional high-temperature strength, creep resistance, and stability under irradiation. L-PBF AM of TZM has previously been investigated at LANL under the Microreactor program, NASA, ORNL, and in academia. However, due to the crack prone nature of TZM, L-PBF AM of TZM resulted in significant microcracking and additional development is required to pursue viable maturation. Other AM methods have been found to be more successful in printing TZM, and those alternatives approaches are discussed in this effort. The efforts detailed in this report focused on continued development of Nb1Zr through L-PBF and development of TZM via L-PBF and electron powder bed fusion (E-PBF). The objective of this work was to further the development of these AM techniques for the chosen refractory alloys, elucidating and addressing associated challenges through characterization of several demonstration builds. At LANL, Nb1Zr builds were completed using an EOS M290 and M400 machines, and a refractory alloy-dedicated L-PBF system, the Xact Metal XM200G, was installed. The XM200G primary purpose was to do the Nb1Zr parameter development process; however, due to difficulties associated with the machine installation and qualification process, it was decided to pivot development to the larger M400 and M290 machines. Although the supply of Nb1Zr powder was limited, it was sufficient to generate sub-scale metallographic specimens for the purpose of parameter development. This was first accomplished on the EOS M400 then the M290 due to machine schedule availability. Further development of TZM has been initiated at the University of Texas El Paso (UTEP) under contract with LANL to use both a heated build envelope L-PBF machine and E-PBF machine that have been found in the literature to mitigate microcracking. UTEP was provided with TZM powder and build plates to support parallel TZM parameter development across both machines. As part of the contract, UTEP will also be conducting microstructural characterization once optimized process parameters have been identified. The optimized process parameters for each machine will be used to generate a series of metallographic, mechanical, and surface finish specimens for subsequent characterization and testing. In the next section, we provide a detailed discussion of the methodology used for investigating the feasibility of leveraging these alloys for use in advanced reactor applications.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Effects of Asymmetric Molecular Architecture on Chain Stretching and Dynamics in Miktoarm Star Copolymers

We use broad-band dielectric spectroscopy (BDS) and small-angle X-ray scattering (SAXS) to investigate the impact of architectural asymmetry in the miktoarm star copolymer on the dielectric polymer relaxations. The miktoarm copolymers studied contain one or two polystyrene (PS) chains of constant molecular weight and two identical poly(cis-1,4-isoprene) (PI) chains with varied molecular weights. Using the chains in the PI block as dielectric probes, we find that the architecturally asymmetric miktoarm star copolymer systems (PSPI 2 ) feature distributions in chain relaxation times and dielectric relaxation strengths that are not dependent on molecular weight or morphology, in stark contrast to the effects of morphological confinement observed for symmetric diblock systems (PS-b-PI or PS 2 PI 2 ). Along with evidence from the SAXS measurements regarding phase separation, these results are attributed to influences from chain stretching within the framework of the Gaussian chain model for block copolymer systems. As such, the molecular architecture in block copolymers happens to be a versatile handle to control polymer chain dynamics and, ultimately, the macroscopic physicochemical properties in architecturally complex polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Strong tough hydrogels via the synergy of freeze-casting and salting out

Natural load-bearing materials like tendons possess high water content of ~70% but14 are still strong and tough even when used for over 1 million cycles per year, which is owed to the hierarchical assembly of anisotropic structures across multi-length-scales . In imitation of natural systems, various hydrogels have been created via methods like electro-spinning, extrusion, compositing, freeze casting, self-assembly, and mechanical stretching for improved mechanical performance. However, in contrast to tendons, many hydrogels with the same high water content do not show high strength, large toughness or high fatigue resistance. In this work, we present a strategy to produce strong, tough and fatigue resistant hydrogels with multi-length-scale hierarchical architecture using a freezing-assisted salting-out treatment. The produced exemplary poly(vinyl alcohol) hydrogels are highly anisotropic, comprising micrometer-scale honeycomb-like pore walls, which in turn comprise interconnected nanofibrils meshes, entirely physically assembled from polymer chains. These hydrogels are made of 70-95% water but can exhibit ultra-high ultimate stress (23.5 ± 2.7 MPa) and strain (2900 ± 450%), giant 32226 toughness (210 ± 13 MJ/m , 175 ± 8 kJ/m) and remarkable fatigue threshold (10.5 ± 1.3 kJ/m), which are 10 times tougher than natural tendon. The presented strategy could expand the applicability of weak polymeric material, like hydrogels, in practical applications that requires long-term services with high-loads and abrupt-impacts and extend the development of structural hydrogels.

36 MATERIALS SCIENCE↗

DOE OSTI2025

ULTIMATE Phase I project: Development of Niobium-based alloys for Turbine Applications

Current Ni-based alloys used in turbine blade applications are operating at 1100°C which is approximately 90% of the solidus of Ni-based alloys. Further increases in temperature can be achieved only through the use of alloys with higher solidus temperatures such as refractory alloys which include Mo, Nb, W, Ta alloys. Niobium has a unique combination of physical properties that include a high melting point (2468°C), lowest density (8.57 g/cc), and the lowest modulus amongst refractory alloys, a good thermal conductivity that increases from 45 W/mK at room temperature to 62 W/mK at 1093°C, good ductility with fabricability using traditional techniques, high strength, good creep resistance, and general chemical inactivity. Hence niobium alloys offer many advantages for use at the desired temperature of 1300°C. One of the major deterrents to the use of niobium and its alloys at high temperatures is achieving good oxidation resistance. In addition, achieving balanced properties of room temperature strength, ductility, fracture toughness, high temperature strength, and creep resistance required for 1300°C operation at a density of 9 g/cm 3 is extremely challenging since the addition of W which is a potent strengthener increases the density of the alloy. This project seeks to enable the development of a tri-layered turbine blade that can operate continuously at 1300°C with the core of the turbine blade providing good creep resistance, the second layer providing improved oxidation resistance over the core layer, and the third layer being an environmental barrier providing oxidation resistance. The objective of this Phase 1 project was to use computational modeling and advanced characterization tools to develop two classes of Nb alloys which could be used as the core layer and the transition layer. The first class of alloys developed in this project was a Nb-alloy designed to serve as the turbine blade core with excellent room temperature strength, ductility, and high temperature strength and creep resistance required for 1300°C operation. These alloys were designed to contain sufficient solute solution strengthening elements (W, Mo) but constrained by the density of alloy, along with the addition of elements such as Zr, Hf, Ta, C, and N to achieve a combination of primary and secondary carbide precipitation. A total of 38 “creep-resistant” alloys were designed and cast during the duration of the project. Processing techniques were developed to keep the oxygen contents as low as possible with typical oxygen contents less than 250 ppm. One alloy with a density of < 9.5 g/cc was successful in meeting the Phase 2 intermediate project mechanical property milestone requirements of room temperature ductility greater than 1.0%, 1200°C creep strain of less than 3% at 150 MPa and 100 hours in vacuum, and with solidus temperature greater than 1500ᵒC. The second class of alloys was designed to be a Nb-rich alloy with improved oxidation resistance when compared to the core layer and was designed specifically to be compatible with the core layer and the outer environmental barrier coating. This Nb- alloy will be specifically designed to be microstructurally stable at these temperatures when in contact with the core alloy and provide protection against catastrophic failure of the barrier coating. Two alloys were cast and processed but further development was discontinued to focus on the development of the creep resistant alloy.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Imaging phonon dynamics with ultrafast electron microscopy: Kinematical and dynamical simulations

Ultrafast x-ray and electron scattering techniques have proven to be useful for probing the transient elastic lattice deformations associated with photoexcited coherent acoustic phonons. Indeed, femtosecond electron imaging using an ultrafast electron microscope (UEM) has been used to directly image the influence of nanoscale structural and morphological discontinuities on the emergence, propagation, dispersion, and decay behaviors in a variety of materials. Here, we describe our progress toward the development of methods ultimately aimed at quantifying acoustic-phonon properties from real-space UEM images via conventional image simulation methods extended to the associated strain-wave lattice deformation symmetries and extents. Using a model system consisting of pristine single-crystal Ge and a single, symmetric Lamb-type guided-wave mode, we calculate the transient strain profiles excited in a wedge specimen and then apply both kinematical- and dynamical-scattering methods to simulate the resulting UEM bright-field images. While measurable contrast strengths arising from the phonon wavetrains are found for optimally oriented specimens using both approaches, incorporation of dynamical scattering effects via a multi-slice method returns better qualitative agreement with experimental observations. Contrast strengths arising solely from phonon-induced local lattice deformations are increased by nearly an order of magnitude when incorporating multiple electron scattering effects. We also explicitly demonstrate the effects of changes in global specimen orientation on the observed contrast strength, and we discuss the implications for increasing the sophistication of the model with respect to quantification of phonon properties from UEM images.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Ultimate precision limit of noise sensing and dark matter search

Abstract The nature of dark matter is unknown and calls for a systematical search. For axion dark matter, such a search relies on finding feeble random noise arising from the weak coupling between dark matter and microwave haloscopes. We model such process as a quantum channel and derive the fundamental precision limit of noise sensing. An entanglement-assisted strategy based on two-mode squeezed vacuum is thereby demonstrated optimal, while the optimality of a single-mode squeezed vacuum is found limited to the lossless case. We propose a “nulling” measurement (squeezing and photon counting) to achieve the optimal performances. In terms of the scan rate, even with 20-decibel of strength, single-mode squeezing still underperforms the vacuum limit which is achieved by photon counting on vacuum input; while the two-mode squeezed vacuum provides large and close-to-optimum advantage over the vacuum limit, thus more exotic quantum resources are no longer required. Our results highlight the necessity of entanglement assistance and microwave photon counting in dark matter search.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2021

Effects of Electron Irradiation on Candidate Materials for Target Window in Accelerator-Driven Mo-99 Production

Room-temperature (RT) axial tensile tests were conducted in 2018 and 2021 with flat, sub-sized, dog-boned samples of non-irradiated and irradiated Inconel 718 and irradiated beryllium (Be). The sample gauge length was 7.62 mm. Tensile properties of interest are the engineering yield stress (YS), ultimate tensile stress (UTS), uniform elongation (UE) and total elongation (TE). The electron dose of the 2021 samples was ≈2 times the dose of samples tested in 2018. Relative dose rates of 0, 1 (2018), and 2 (2021) are assigned to these samples. The 2021 electron-irradiated Be samples were brittle with a low failure stress of 338±64 MPa based on two samples. The failures occurred in the gauge section. The 2018 results for electron-irradiated Be indicated a slight decrease in ductility and strength for the one electron-irradiated sample that failed in the gauge section.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2025

Examining future changes in coastal low-level jet properties offshore California through dynamical downscaling

The coastal low-level jet, or coastal low-level jet (CLLJ), is a synoptically-forced meteorological feature frequently present offshore the western United States (U.S.). Characterized by a wind speed maximum that resides at the top of the marine boundary layer, the CLLJ is largely controlled by the location and strength of the North Pacific High (NPH) as well as the coastal geometry. Considering the rich wind resource available in this offshore region, the Bureau of Ocean Energy Management identified wind energy lease areas offshore California and supported the deployment of two U.S. Department of Energy wind lidar buoys near Morro Bay and Humboldt. Despite our relatively good understanding of the fundamental mechanisms responsible for large-scale CLLJ properties offshore the western U.S., future changes in CLLJ characteristics are less clear. To address this research challenge, and ultimately to better inform future wind turbine deployments, we use simulations driven by three global climate models (GCMs). We apply self-organizing maps to the model outputs for a historical and two future climate periods to show the range of NPH regimes that support CLLJ conditions during the warm seasons, as well as the subtle contribution from land-falling cyclones approaching the mainland during the cold seasons. Compared to the historical period, the three GCM-driven simulations agree that CLLJ conditions will become more (less) prevalent from central California northward (southward). They agree less with respect to future changes in maximum CLLJ wind speeds and CLLJ heights. However, after considering model biases present during the historical period, wind speeds between the models are actually more similar during the 2070–2095 period than during the historical period. The potential combination of more frequent CLLJ conditions characterized by relatively consistent wind speeds occurring at lower heights across northern California suggests that the Humboldt lease area may be ideal for a long-term wind turbine deployment.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Modeling Interfaces to Support Low-Level Waste Disposal System Performance Assessments - 20366

In low-level waste (LLW) disposal sites, interfaces between cementitious materials, used as waste forms and/or engineered barriers, and the surrounding soil or backfill material are often encountered. Reactions across these interfaces may lead to chemical and structural alteration of the cementitious and backfill materials that may ultimately affect long-term performance. For example, the ingress of carbon dioxide from soil gas into a waste tank concrete shell at the Hanford Site or Savannah River Site (SRS) or a low-level waste disposal vault at SRS leads to carbonation of cement hydration products (e.g. portlandite, calcium-silicate hydrate or C-S-H, and ettringite). The result of carbonation is a decrease in pH in the cement paste portion of the tank wall or vault concrete structure that could ultimately lead to de-passivation of the embedded structural steel and, eventually, to cracking. Cracking can lead to increased ingress of water into the structure, corresponding increased release of constituents of concern, and to subsequent increased transport of these constituents to the surrounding environment. The mobility of trace constituents (e.g., radionuclides of concern) in waste forms may increase in response to changes in pH, pore structure, and mineralogical gradients. Depletion of portlandite results in subsequent decalcification of C-S-H that leads to changes in the cement strength and may lead to structural failure. At the boundary between waste forms and concrete vaults, the migration of sulfate ions from the salt waste form (e.g., the saltstone waste form used for LLW disposal at the Savannah River Site in Saltstone Disposal Units, or SDUs) into the barrier or vault concrete has been predicted to result in expansive mineral phase formation (or 'sulfate attack'). Expansive mineral formation could result in cracking and potential loss of structural integrity in the vault concrete. In the performance assessment (PA) for the SRS SDUs, prediction of both the carbonation and sulfate attack fronts are critical to assessing the long-term performance of these LLW disposal vaults. A general purpose geochemical reactive transport model has been developed in LeachXS/ORCHESTRA to evaluate typical interfaces for LLW disposal environments, including SDUs at SRS. The model may be used to predict the long-term performance of interfaces between cementitious materials and saltstone or backfill materials with respect to primary phases by considering mass transport, cement chemistry, geochemical speciation, and multi-ionic diffusion over interfaces between different materials. The present study compares the performance and interactions between vault concrete and saltstone waste form for a representative SDU scenario. The materials were characterized using pH-dependence leaching test (EPA 1313) and semi-dynamic transport tests (EPA 1315) with test results used to parameterize the interface model. The development of a credible inter model provides an important basis for supporting future PAs where carbonation and sulfate attack are important aging and degradation mechanisms. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗