Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “redox kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

The optimal co-doping of SrFe 1-x Co x O 3-δ oxygen carriers in redox applications

Although the oxygen carrier SrCoO 3 has higher redox activity than SrFeO 3 , cobalt is both more expensive and scarcer than iron, which would hinder the wide implementation of SrCoO 3 . For these reasons, doping SrFeO 3 with Co is a potential compromise, benefitting the redox properties of SrFeO 3 , while still limiting the overall amount of cobalt being used. In this work, to find the optimal level of Co-doping, density functional theory calculations were performed to investigate the Co-doping effect on the oxygen vacancy formation and oxygen migration in SrFe 1- x Co x O 3- δ ( x = 0, 0.125, 0.25, 0.375, 0.5). Our findings show that the oxygen vacancy formation energies ( E f ) decrease with the increase of Co content resulting from the increased composition of the O-2p band at the Fermi level upon Co doping. In particular, the E f decreases nearly 0.5 eV between the x = 0 and x = 0.25 samples while E f only decreases 0.1 eV further as Co content is increased to x = 0.5. We obtain that x = 0.25 is an optimal cost/benefit ratio for Co doping, which is preserved at both low oxygen vacancy concentrations ( δ = 0.0625 values listed above) and at high concentrations of δ = 0.1875 and 0.375. Kinetically, the oxygen migration barrier has slight change upon Co doping due to the similar size of Co and Fe. Therefore, considering both redox activity and economics in reversible oxygen storage applications, x = 0.25 is suggested as the optimal Co-doping value in SrFe 1- x Co x O 3- δ .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Thermal Gradient Effects on Redox Evolution and Volatility-Driven Fractionation in Ternary U/Ce/Cs Condensates

Understanding how thermal history influences redox evolution and chemical fractionation is essential for characterizing high-temperature condensation in complex materials, including nuclear debris. Here, we tested the hypothesis that distinct thermal regimes in a plasma flow reactor influence redox pathways and elemental partitioning in ternary U/Ce/Cs systems. A configurable plasma flow reactor was modified with an external tube furnace to impose two distinct thermal gradients: continuous ambient cooling and a furnace-assisted thermal hold-up near 1400 K followed by rapid cooling. Transmission electron microscopy characterized phase identity, morphology, and nanoscale element distributions, while inductively coupled plasma-mass spectrometry quantified bulk elemental ratios. Across both thermal regimes, uranium and cerium condensed as UO 2 and CeO 2 as dominant refractory oxide products. Uranium partially oxidized to α-UO 3 during extended ambient cooling, while furnace-assisted hold-up preserved UO 2 and produced partial reduction of cerium to Ce 2 O 3 . Cesium remained volatile upstream and condensed later in the reactor, forming Cs 2 O and Cs-uranate phases with the highest incorporation after thermal hold-up. Bulk ICP-MS measurements supported these observations. U/Ce ratios remained comparatively stable and Cs displayed delayed and apparent transient enrichment that matched the nanoscale measurements. This integrated approach provides a quantitative method for linking thermal gradients to redox evolution and volatility-driven fractionation. These results show how the plasma flow reactor can identify where equilibrium descriptions remain adequate and where kinetic effects from residence time and temperature history must be considered when interpreting condensation behavior in multicomponent systems.

and nuclear chemistry↗
DOE OSTI2023

General Kinetic Model for pH Dependence of Proton-Coupled Electron Transfer: Application to an Electrochemical Water Oxidation System

The pH dependence of proton-coupled electron transfer (PCET) reactions, which are critical to many chemical and biological processes, is a powerful probe for elucidating their fundamental mechanisms. Herein, a general, multichannel kinetic model is introduced to describe the pH dependence of both homogeneous and electrochemical PCET reactions. According to this model, a weak pH dependence can arise from the competition among multiple sequential and concerted PCET channels involving different forms of the redox species, such as protonated and deprotonated forms, as well as different proton donors and acceptors. The contribution of each channel is influenced by the relative populations of the reactant species, which often depend strongly on pH, leading to complex pH dependence of PCET apparent rate constants. This model is used to explain the origins of the experimentally observed weak pH dependence of the electrochemical PCET apparent rate constant for a ruthenium-based water oxidation catalyst attached to a tin-doped In2O3 (ITO) surface. The weak pH dependence is found to arise from the intrinsic differences in the rate constants of participating channels and the dependence of their relative contributions on pH. This model predicts that the apparent maximum rate constant will become pH-independent at higher pH, which is confirmed by experimental measurements. Our analysis also suggests that the dominant channels are electron transfer at lower pH and sequential PCET via electron transfer followed by fast proton transfer at higher pH. Furthermore, this work highlights the importance of considering multiple competing channels simultaneously for PCET processes.

Catalysts↗
DOE OSTI2020

Probing Mg Intercalation in the Tetragonal Tungsten Bronze Framework V 4 Nb 18 O 55

While commercial Li-ion batteries offer the highest energy densities of current rechargeable battery technologies, their energy storage limit has almost been achieved. Therefore, there is considerable interest in Mg batteries, which could offer increased energy densities in comparison to Li-ion batteries if a high-voltage electrode material, such as a transition-metal oxide, can be developed. However, there are currently very few oxide materials which have demonstrated reversible and efficient Mg 2+ insertion and extraction at high voltages; this is thought to be due to poor Mg 2+ diffusion kinetics within the oxide structural framework. Here, in this paper, the authors provide conclusive evidence of electrochemical insertion of Mg 2+ into the tetragonal tungsten bronze V 4 Nb 18 O 55 , with a maximum reversible electrochemical capacity of 75 mA h g –1 , which corresponds to a magnesiated composition of Mg 4 V 4 Nb 18 O 55 . Experimental electrochemical magnesiation/demagnesiation revealed a large voltage hysteresis with charge/discharge (1.12 V vs Mg/Mg 2+ ); when magnesiation is limited to a composition of Mg 2 V 4 Nb 18 O 55 , this hysteresis can be reduced to only 0.5 V. Hybrid-exchange density functional theory (DFT) calculations suggest that a limited number of Mg sites are accessible via low-energy diffusion pathways, but that larger kinetic barriers need to be overcome to access the entire structure. The reversible Mg 2+ intercalation involved concurrent V and Nb redox activity and changes in crystal structure, as confirmed by an array of complementary methods, including powder X-ray diffraction, X-ray absorption spectroscopy, and energy-dispersive X-ray spectroscopy. Consequently, it can be concluded that the tetragonal tungsten bronzes show promise as intercalation electrode materials for Mg batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1990

Characterization of reaction kinetics in a porous electrode

A continuum-model approach, analogous to porous electrode theory, was applied to a thin-layer cell of rectangular and cylindrical geometry. A reversible redox couple is assumed, and the local reaction current density is related to the potential through the formula of Hubbard and Anson for a uniformily accessible thin-layer cell. The placement of the reference electrode is also accounted for in the analysis. Primary emphasis is placed on the effect of the solution-phase ohmic potential drop on the voltammogram characteristics. Correlation equations for the peak-potential displacement from E(sup 0 prime) and the peak current are presented in terms of two dimensionless parameters.

Fedkiw, Peter S.↗
DOE OSTI2023

Metal-ligand catalysts for selective promotion of electrochemical CO 2 RR

The electrochemical carbon dioxide reduction reaction (CO 2 RR) provides opportunities to synthesize value-added products from this greenhouse gas in a sustainable manner. Efficient catalysts for this reaction are provided that selectively drive CO 2 reduction over the thermodynamic and kinetically competitive hydrogen evolution reaction (HER) in organic or aqueous electrolytes. The catalysts are metal-polypyridyl coordination complexes of a redox non-innocent terpyridine-based pentapyridine ligand and a first-row transition metal. The metal-ligand cooperativity in [Fe(tpyPY2Me)]2+ drives the electrochemical reduction of CO 2 to CO at low overpotentials with high selectivity for CO 2 RR (>90%).

Derrick, Jeffrey S.↗
DOE OSTI2022

A Thermogravimetric Temperature-Programmed Thermal Redox Protocol for Rapid Screening of Metal Oxides for Solar Thermochemical Hydrogen Production

As combinatorial and computational methods accelerate the identification of potentially suitable thermochemically-active oxides for use in solar thermochemical hydrogen production (STCH), the onus shifts to quickly evaluating predicted performance. Traditionally, this has required an experimental setup capable of directly carrying out a two-stage thermochemical water-splitting process. But this can be a difficult endeavor, as most off-the-shelf equipment cannot adequately deal simultaneously with the high temperatures, varying oxygen partial pressures, and high H 2 O partial pressures required; achieving sufficient temporal sensitivity to accurately quantify the kinetics is also a major challenge. However, as proposed here, a less complicated experiment can be used as a first screening for thermochemical water splitting potential. Temperature-Programmed Thermal Redox (TPTR) using thermogravimetry evaluates the thermal reduction behavior of materials. This technique does not require water splitting or CO 2 -splitting analogs but can nonetheless predict water-splitting performance. Three figures of merit are obtained from the TPTR experiment: reduction onset temperature, extent of reduction, and extent of recovery upon reoxidation. These metrics can collectively be used to determine if a material is capable of thermochemical water-splitting, and, to good approximation, predict whether the thermodynamics are favorable for use under more challenging high-conversion conditions. This paper discusses the pros and cons of using TPTR and proposes a protocol for use within the STCH community.

08 HYDROGEN↗
DOE OSTI2021

Electrochemical implications of modulating the solvation shell around redox active organic species in aqueous organic redox flow batteries

Significance The development of cost-effective batteries for long-duration grid scale energy storage will be accelerated using frameworks to rapidly screen and select battery components. Herein, we show that the solvent reorganization energy calculated from the Born equation (with reference to an electrolyte’s composition) is predictive of the electrolytes’ device level performance. This descriptor was found to correlate with key transport and kinetic properties over a range of electrolyte compositions and pH values, succinctly capturing the multicomponent interactions between the electrolyte salts and solvent. This enables the initial high-throughput screening of electrolyte candidates with minimal experimentation. Applied to aqueous redox flow batteries employing organic redox active species, we predict high-performance electrolyte compositions, enabling significantly enhanced device performance.

Sharma, Kritika↗
NASA NTRS2001

Relative effectiveness of kinetic analysis vs single point readings for classifying environmental samples based on community-level physiological profiles (CLPP)

The relative effectiveness of average-well-color-development-normalized single-point absorbance readings (AWCD) vs the kinetic parameters mu(m), lambda, A, and integral (AREA) of the modified Gompertz equation fit to the color development curve resulting from reduction of a redox sensitive dye from microbial respiration of 95 separate sole carbon sources in microplate wells was compared for a dilution series of rhizosphere samples from hydroponically grown wheat and potato ranging in inoculum densities of 1 x 10(4)-4 x 10(6) cells ml-1. Patterns generated with each parameter were analyzed using principal component analysis (PCA) and discriminant function analysis (DFA) to test relative resolving power. Samples of equivalent cell density (undiluted samples) were correctly classified by rhizosphere type for all parameters based on DFA analysis of the first five PC scores. Analysis of undiluted and 1:4 diluted samples resulted in misclassification of at least two of the wheat samples for all parameters except the AWCD normalized (0.50 abs. units) data, and analysis of undiluted, 1:4, and 1:16 diluted samples resulted in misclassification for all parameter types. Ordination of samples along the first principal component (PC) was correlated to inoculum density in analyses performed on all of the kinetic parameters, but no such influence was seen for AWCD-derived results. The carbon sources responsible for classification differed among the variable types with the exception of AREA and A, which were strongly correlated. These results indicate that the use of kinetic parameters for pattern analysis in CLPP may provide some additional information, but only if the influence of inoculum density is carefully considered. c2001 Elsevier Science Ltd. All rights reserved.

NASA Center KSC↗
DOE OSTI2023

OH Roaming during the Ozonolysis of α-Pinene: A New Route to Highly Oxygenated Molecules?

The formation of low-volatility organic compounds in the ozonolysis of α-pinene, the dominant atmospheric monoterpene, provides an important route to aerosol formation. Here, in this work, we consider a previously unexplored set of pathways for the formation of highly oxygenated molecules in α-pinene ozonolysis. Pioneering, direct experimental observations of Lester and co-workers have demonstrated a significant production of hydroxycarbonyl products in the dissociation of Criegee intermediates. Theoretical analyses indicate that this production arises from OH roaming-induced pathways during the OO fission of the vinylhydroperoxides (VHPs), which in turn come from internal H transfers in the Criegee intermediates. Ab initio kinetics computations are used here to explore the OH roaming-induced channels that arise from the ozonolysis of α-pinene. For computational reasons, the calculations consider a surrogate for α-pinene, where two spectator methyl groups are replaced with H atoms. Multireference electronic structure calculations are used to illustrate a variety of energetically accessible OH roaming pathways for the four VHPs arising from the ozonolysis of this α-pinene surrogate. Ab initio transition-state theory-based master equation calculations indicate that for the dissociation of stabilized VHPs, these OH roaming pathways are kinetically significant with a branching that generally increases from ~20% at room temperature up to ~70% at lower temperatures representative of the troposphere. For one of the VHPs, this branching already exceeds 60% at room temperature. For the overall ozonolysis process, these branching ratios would be greatly reduced by a limited branching to the stabilized VHP, although there would also be some modest roaming fraction for the nonthermal VHP dissociation process. The strong exothermicities of the roaming-induced isomerizations/additions and abstractions suggest new routes to fission of the cyclobutane rings. Such ring fissions would facilitate further autoxidation reactions, thereby providing a new route for producing highly oxygenated nonvolatile precursors to aerosol formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Revealing the Fast and Durable Na + Insertion Reactions in a Layered Na 3 Fe 3 (PO 4 ) 4 Anode for Aqueous Na-Ion Batteries

Aqueous sodium-ion batteries represent a promising approach for stationary energy storage; however, the lack of appropriate anode materials has substantially retarded their development. Herein, we demonstrated an iron-based phosphate material of Na 3 Fe 3 (PO 4 ) 4 as an inexpensive and efficacious anode alternative. While the Fe 3+ /Fe 2+ redox couple renders a two-Na-insertion reaction with desirable potentials, its unique layered structure further facilitates the Na-insertion kinetics and reversibility. Consequently, this electrode exhibits an appealing Na-insertion performance, with a reversible capacity of ~83 mAh g –1 , suitable anode potential of -0.4 V vs Ag/AgCl, excellent rate capability of 200 C, and outstanding cycling of 6000 cycles. Utilizing operando synchrotron X-ray diffraction and X-ray absorption spectroscopy, we revealed the structural evolution of the Na 3 Fe 3 (PO 4 ) 4 anode during the two-electron reaction, where the extremely small volume expansion (~3%) enables its fast-charging and long-cycling capability. Our work suggests new considerations of developing versatile iron phosphate compounds as appealing anode materials for energy storage in aqueous electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2021

Modifying redox properties and local bonding of Co 3 O 4 by CeO 2 enhances oxygen evolution catalysis in acid

Developing efficient and stable earth-abundant electrocatalysts for acidic oxygen evolution reaction is the bottleneck for water splitting using proton exchange membrane electrolyzers. Here, we show that nanocrystalline CeO 2 in a Co 3 O 4 /CeO 2 nanocomposite can modify the redox properties of Co 3 O 4 and enhances its intrinsic oxygen evolution reaction activity, and combine electrochemical and structural characterizations including kinetic isotope effect, pH- and temperature-dependence, in situ Raman and ex situ X-ray absorption spectroscopy analyses to understand the origin. The local bonding environment of Co 3 O 4 can be modified after the introduction of nanocrystalline CeO 2 , which allows the CoIII species to be easily oxidized into catalytically active CoIV species, bypassing the potential-determining surface reconstruction process. Co 3 O 4 /CeO 2 displays a comparable stability to Co 3 O 4 thus breaks the activity/stability tradeoff. This work not only establishes an efficient earth-abundant catalysts for acidic oxygen evolution reaction, but also provides strategies for designing more active catalysts for other reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Redox-Induced Microstructure and Phase Dynamics in Nickel: Insights from In Situ Synchrotron X-ray Diffraction

Using in situ synchrotron X-ray diffraction, we interrogate the microstructural and phase evolution of polycrystalline nickel (Ni) during redox cycling in O 2 , H 2 , and H 2 O environments. Oxidation in O 2 promotes strong (111) texturing in both the NiO overlayer and the underlying Ni substrate. However, this crystallographic alignment is lost following reduction in H 2 and subsequent reoxidation, demonstrating irreversible microstructural changes. H 2 exposure leads to proton dissolution into the Ni lattice, triggering a localized phase transition from face-centered cubic (FCC) to hexagonal close-packed (HCP) Ni in hydrogen-saturated regions. In H 2 O-containing atmospheres, dissociative H 2 O adsorption produces protons that permeate the NiO layer, forming γ-NiOOH within the NiO lattice and HCP Ni beneath the NiO overlayer as protons accumulate. Kinetic analysis via the Johnson-Mehl-Avrami–Kolmogorov model uncovers distinct growth mechanisms: preoxidized Ni surfaces follow one-dimensional (1D) kinetics for NiO, γ-NiOOH, and HCP growth, whereas pristine Ni exhibits three-dimensional (3D) kinetics due to island-like nucleation and growth of NiO. Furthermore, these results highlight the critical interplay between H 2 O dissociation, hydrogen permeation, and redox-driven phase transformations, with practical implications in engineering nickel-based catalysts and hydrogen storage systems through controlled microstructural and phase evolution.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Solvent molecules form surface redox mediators in situ and cocatalyze O 2 reduction on Pd

Solvent molecules influence the reactions of molecular hydrogen and oxygen on palladium nanoparticles. Organic solvents activate to form reactive surface intermediates that mediate oxygen reduction through pathways distinct from reactions in pure water. Kinetic measurements and ab initio quantum chemical calculations indicate that methanol and water cocatalyze oxygen reduction by facilitating proton-electron transfer reactions. Methanol generates hydroxymethyl intermediates on palladium surfaces that efficiently transfer protons and electrons to oxygen to form hydrogen peroxide and formaldehyde. Formaldehyde subsequently oxidizes hydrogen to regenerate hydroxymethyl. Water, on the other hand, heterolytically oxidizes hydrogen to produce hydronium ions and electrons that reduce oxygen. These findings suggest that reactions of solvent molecules at solid-liquid interfaces can generate redox mediators in situ and provide opportunities to substantially increase rates and selectivities for catalytic reactions.

Adams, Jason S.↗
DOE OSTI2022

Activating Nitrogen–doped Graphene Oxygen Reduction Electrocatalysts in Acidic Electrolytes using Hydrophobic Cavities and Proton–conductive Particles

Although pyridinic-nitrogen (pyri-N) doped graphene is highly active for the oxygen reduction reaction (ORR) of fuel cells in alkaline media, the activity critically decreases under acidic conditions. Herein we report on how to prevent the deactivation based on the mechanistic understanding that O 2 + pyri–NH ⁺ + e – → O 2,a + pyri–NH governs the ORR kinetics. First, we considered that the deactivation is due to the hydration of pyri-NH + , leading to a lower shift of the redox potential. Introducing the hydrophobic cavity prevented the hydration of pyri-NH + but inhibited the proton transport. We then increased proton conductivity in the hydrophobic cavity by introducing SiO 2 particles coated with ionic liquid polymer/Nafion® which kept the high onset potentials with an increased current density even in acidic media.

25 ENERGY STORAGE↗
DOE OSTI2020

The Fast-Track Water Oxidation Channel on BiVO 4 Opened by Nitrogen Treatment

BiVO 4 is one of the most promising photoanode materials for water-splitting systems. Nitrogen incorporation into a BiVO 4 surface overcomes the known bottleneck in its charge-transfer kinetics into the electrolyte. We explored the role of nitrogen in the surface charge recombination and charge-transfer kinetics by employing transient photocurrent spectroscopy at the time scale of surface recombination and water oxidation kinetics, transient absorption spectroscopy, and X-ray photoelectron spectroscopy. We attributed the activity enhancement mechanism to the accelerated V 5+ /V 4+ redox process, in which incorporated nitrogen suppresses a limiting surface recombination channel by increasing the oxygen vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Contactless measurement of the photovoltage in BiVO 4 photoelectrodes

The power output of photoelectrochemical devices for solar energy-to-fuel conversion is determined by the photovoltage of the junction under illumination. In the presence of fast redox couples, the photovoltage can be obtained directly from current–voltage measurements of the device. However, for slow redox couples (H + /H 2 , O 2 /H 2 O) used in solar fuel photoelectrodes, photovoltage measurements are not straightforward, due to the kinetic overpotentials during charge transfer. Here we show that the photovoltage of BiVO 4 electrodes in contact with fast electron donors KI, Na 2 SO 3 or H 2 O 2 or K 4 Fe(CN) 6 can be measured in a contactless way with vibrating Kelvin probe surface photovoltage (SPV) spectroscopy. The photovoltage varies with illumination wavelength and intensity and matches the open circuit potential of the electrodes, obtained separately from electrochemical measurements. Plots of the photovoltage versus irradiance can be used to predict the oxidizing power of each electrode under zero applied bias. Except for K 4 Fe(CN) 6 , which causes shunting in the BiVO 4 electrode, photovoltage values correlate well with the built-in potential of each junction. Furthermore, the ability to obtain photovoltage information through contactless SPV measurements will be useful in the search for solid–liquid junctions with superior energy conversion properties.

14 SOLAR ENERGY↗
DOE OSTI2026

Scalable Solar Fuels Production in A Reactor Train System by Thermochemical Redox Cycling of Novel Nonstoichiometric Perovskites

Hydrogen production via two-step thermochemical water splitting redox cycles using nonstoichiometric redox-active metal oxides has the potential to dramatically increase fuel production rates. At moderate-to-low water splitting temperatures, surface reaction kinetics co-limit the process. In such cases, stable and high surface area microstructures that allow exploitation of the full thermodynamic potential of the materials are essential as is tight thermal integration of the reactor module. This project’s goals were the development of novel nonstoichiometric perovskite oxides with high stability and favorable thermodynamic and kinetic properties, to optimize their microstructure for maximizing the fuel productivity, and to build a prototype reactor train system (RTS) comprising at least one reactor to meet specific performance targets: (1) capable of an in-house solar thermochemical hydrogen (STCH) productivity ≥ 12 mL g -1 for stable continuous operation ≥ 20 cycles; and (2) demonstration of scalable solar fuels production at practical solar reactor level in an industrial-scale concentrated solar tower (CST) using developed perovskites to achieve a hydrogen production rate ≥ 1 g h -1 .

08 HYDROGEN↗