Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “photoelectron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Characterization of a LaB6 tip as a thermionically enhanced photoemitter

There is a widespread interest in time-resolved electron spectroscopies such as ultrafast electron diffraction, ultrafast electron microscopy, and ultrafast electron energy loss spectroscopy. These techniques require pulsed electron beams with both high current and brightness. LaB6 is commonly used as a thermionic emitter because of its low work function and high electron yield. However, its use as a pulsed photocathode has not been widely explored. Here, we present measurements of the electron yield from a LaB6 filament exposed to 392 nm UV ultrafast laser pulses under a wide range of filament temperatures. We find that sample heating strongly enhances photoelectron yield, an effect known as thermionically enhanced photoemission. However, it also creates potentially undesirable, continuous thermionic background. We conclude that the ideal optimal operating conditions strongly depend on the type of measurement and require defining and quantifying an appropriate figure of merit.

Physics↗
DOE OSTI2021

Local Structural Disorder in Metavanadates MV 2 O 6 (M = Zn and Cu) Synthesized by the Deep Eutectic Solvent Route: Photoactive Oxides with Oxygen Vacancies

Metavanadates MV 2 O 6–δ (M = Zn and Cu) are synthesized by using a deep eutectic solvent (DES), a mixture of hydrogen bond donor and acceptor, as a reaction medium. Dissolution of stable binary metal oxides in a DES followed by a heat treatment yields phase-pure vanadates. According to in situ powder X-ray diffraction, ternary phases (α-Zn 2 V 2 O 7 and β-Cu 2–x V 2 O 7 , x ~ 0.27) are intermediates in the reaction pathway taken. Identifying a polymorphic phase transformation temperature for CuV 2 O 6 as well as the narrow temperature range between formation and decomposition for both metavanadates allows for tackling the challenge of the synthesis of these materials. The oxygen vacancy introduced by the DES route is accompanied by the formation of reduced V 4+ and Cu + in the oxide matrix, based on X-ray photoelectron spectroscopy. These oxygen vacancies modify the vibrational modes in the corresponding Raman spectra and are also responsible for broad optical absorptions in the 1.8–1.1 eV range. The optical band gaps of the materials are found at 1.8 eV (CuV 2 O 6 ) and 2.2 eV (ZnV 2 O 6 ), approximately 0.1–0.3 eV below the values reported in the literature. The reduced band gaps and sub-band gap photon absorption are key features of the oxygen-deficient metavanadates. Surface photovoltage spectroscopy reveals that all the synthesized vanadates are n-type materials with electrons as the majority charge carriers, and photoelectrochemical measurements confirm photoanodic currents for methanol oxidation. Furthermore, these results provide insight into the synthesis and structure–property relationship of the metavanadates for their potential use as photoanodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Ammonolysis with N 2 -diluted NH 3 suppresses Ta( IV ) defects in BaTaO 2 N and enhances photocatalytic water oxidation

BaTaO 2 N stands out among oxynitride photocatalysts because of its ability to capture visible light and to drive the photoelectrochemical water oxidation reaction. However, its solar energy conversion performance is limited by electron–hole recombination at Ta( IV ) defects in the material. These defects are formed by overreduction of the Ta(v) oxide precursor by excess ammonia under the high temperature conditions during ammonolysis. Here we show for the first time that Ta( IV ) defect concentrations can be lowered by conducting the ammonolysis reaction in mixed NH 3 /N 2 gas. The obtained BaTaO 2 N samples crystallize in the cubic CaTiO 3 structure type and form 200–300 nm faceted nanocrystals, based on X-ray diffraction, scanning electron microscopy, and HRTEM. Electron paramagnetic resonance spectra observe the Ta( IV ) defects at g = 1.999 and confirm an 11-fold reduction for the product synthesized in mixed (0.13 : 1.0 vol) NH 3 /N 2 gas, equivalent to 1.14 × 10 16 cm −3 Ta( IV ) ions. This optimized BaTaO 2 N has nearly twice the photocatalytic oxygen evolution activity (AQE of 6.78% at 400 nm) of a reference material made with 1.0 atm ammonia and 78% higher photoelectrochemical water oxidation photocurrent (0.9 mA cm −2 at 1.23 V vs. RHE) under simulated sunlight. According to X-ray photoelectron spectroscopy, remaining Ta( IV ) defects are concentrated in the surface region of the BaTaO 2 N particles, where >50% of all Ta ions are found in the +4 oxidation state. This surface Ta( IV ) population can be directly observed in Vibrating Kelvin Probe Surface Photovoltage Spectra (VK-SPV) via its 1.2–1.4 eV photovoltage onset. Here, it suggests that the surface Ta( IV ) ions contribute empty d-states 0.5–0.7 eV below the BaTaO 2 N conduction band edge. These findings highlight how the energetics and concentrations of Ta( IV ) defects influence the photoelectrochemical water oxidation ability of BaTaO 2 N. Additionally, the work establishes ammonolysis with diluted NH 3 as a new tool to minimize defects in BaTaO 2 N and to raise its solar energy conversion efficiency toward its theoretical limit. Because of its simplicity, the reduced ammonia pressure strategy will likely be applicable to other oxynitrides, which generally suffer from overreduction problems during ammonolysis.

Salmanion, Mahya [University of California, Davis,↗
DOE OSTI2021

Evolution of Microstructure and Surface Characteristics of FeCrAl alloys when Subjected to Flow Boiling Testing

FeCrAl alloys are candidate materials for manufacturing accident-tolerant fuel (ATF) cladding intended for light water reactors to increase fuel reliability and safety during design-basis and beyond-design-basis accident scenarios. The evolution of the materials' surface characteristics, microstructure, and mechanical properties when exposed to the Critical Heat Flux (CHF) in flow boiling testing is crucial for safety analysis while providing insights into their thermal-hydraulic performance in nuclear reactors. After CHF, the surface chemistry of two FeCrAl alloys, APMT and C26M, was studied to understand their evolution at the early stage of high-temperature excursions in short time periods. The results indicated a thin layer composed of oxides and hydroxides of Al, Cr, and Fe with varying proportions at different depths in the layer, as indicated by X-ray photoelectron spectroscopy (XPS) and depth profiling. The cross-sections prepared by focused ion beam (FIB) revealed the growth of an oxide layer, in the range of 90-180 nm thick, on the alloys' surfaces. The evolution of the materials' surface chemistry also led to a noticeable post CHF excursion increase in their wettability, with a slight increase in roughness. Further, the investigation of the materials' mechanical properties indicated a modest increase in hardness by 10-15% as well as an increase in their yield strength, as evidenced by the microindentation and ring compression tests conducted before and after CHF testing. Scanning electron Microscopy (SEM) and X-ray diffraction (XRD) were used to investigate microstructural features of the materials and their changes after CHF treatment.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Investigation into the crystal structure–dielectric property correlation in barium titanate nanocrystals of different sizes

For high capacitance multilayer ceramic capacitors, high dielectric constant and lead-free ceramic nanoparticles are highly desired. However, as the particle size decreases to a few tens of nanometers, their dielectric constant significantly decreases, and the underlying mechanism has yet to be fully elucidated. Herein, we report a systematic investigation into the crystal structure–dielectric property relationship of combustion-made BaTiO 3 (BTO) nanocrystals. When the nanocrystal size was 100 nm and below, a metastable paraelectric cubic phase was found in the as-received BTO (denoted as arBTO) nanocrystals based on an X-ray diffraction (XRD) study. A stable ferroelectric tetragonal phase was present when the nanocrystal size was above 200 nm. Notably, the cubic arBTO (particle size ≤100 nm) exhibited tetragonal fluctuations as revealed by Raman spectroscopy, whereas the tetragonal arBTO (particle size ≥200 nm) contained ~10% cubic fraction according to the Rietveld fitting of the XRD profiles. Thermal annealing of the multi-grain tetragonal arBTO at 950 °C yielded single crystals of annealed BTO (denoted as anBTO), whose dielectric constants were higher than those of arBTO. However, the single crystalline anBTO prevented the formation of 90° domains; therefore, they exhibited a low dielectric constant of ~300. Although X-ray photoelectron spectroscopy and high-resolution transmission electron microscopy could not identify the exact structural defects, our study revealed that surface and bulk defects formed during synthesis affect the final crystal structures and thus the dielectric properties of BTO nanocrystals with different sizes. Finally, the understanding obtained from this study will help us design high dielectric constant perovskite nanocrystals for next-generation multilayer ceramic capacitor applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Unexpected Hydride: Ce 4 B 2 C 2 H 2.42 , a Stuffed Variant of the Nd 2 BC Structure Type

Ce 4 B 2 C 2 H 2.42 was grown as large crystals from a cerium/copper eutectic flux. The structure was characterized by single-crystal X-ray and neutron diffraction and was found to be a stuffed variant of Nd 2 BC with the addition of two interstitial hydrogen positions. The tetrahedral hydrogen position is fully occupied, while the octahedral position has an occupancy of 42(3)%. Initial synthesis was due to hydrogen contamination of the cerium metal but has been successfully repeated using anthracene as a carbon and hydrogen source. Density of states calculations suggest that the incorporation of hydrogen stabilizes the compound with respect to the nonhydrided model. Magnetic susceptibility data show a complex magnetic ordering at 7.7 K that originates from the localized electron on the Ce 3+ in the structure. The trivalent state is also supported by X-ray photoelectron spectroscopy measurements. Heat capacity and electrical resistivity data show that the phase transition is broad in temperature, which may be due to structural disorder. Furthermore, the large low temperature value of C/T also indicates possible heavy fermion behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Impact of titanium content on the thermo-mechanical and oxidation response of TiAlTa

This study aimed to analyze how the addition of titanium (Ti) to TiAlTa alloys affects their mechanical properties (Young’s modulus and hardness) and oxidation behavior. Alloys with three different Ti additions and equi-atomic Al and Ta were fabricated with nominal compositions of 33Ti-33Al-33Ta at%, 50Ti-25Al-25Ta at%, and 70Ti-15Al-15Ta at%. Phase identification of as-processed and compositionally homogenized alloys was conducted by coupling various electron microscopy, diffraction, and chemical analysis techniques. Composition and structures were modeled using CALPHAD-based phase predictions and compared with experimental results. Each of the alloys exhibited a unique set of microstructures with distinctly different ordered precipitates, dependent on cooling rate and chemical composition. Subsequently, nanoindentation tests were performed at temperatures of 25°C, 250°C, 500°C, and 750°C. Oxidation studies were conducted under static air at 750°C for up to 200 h. 33Ti-33Al-33Ta at% and 70Ti-15Al-15Ta at% alloys showed higher hardness and modulus than 50Ti-25Al-25Ta at% at room temperature. The 50Ti-25Al-25Ta at% alloy exhibited higher hardness and modulus values but lower oxidation resistance at 750°C when compared with the other specimens. The X-ray photoelectron spectroscopy experiments were conducted to further analyze the oxides present in the samples. Despite each sample displaying combinations of mixed oxide layers, TiO 2 was the preferred oxide forming in the 50Ti-25Al-25Ta composition, while the other samples preferred to form Al 2 O 3 . In conclusion, the findings from this systematic exploration of phase evolution in the TiAlTa alloy space provide insights for optimized material chemistries, processing, and properties.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Bismuth-Polyoxocation Coordination Networks: Controlling Nuclearity and Dimension-Dependent Photocatalysis

Bismuth-oxocluster nodes for metal–organic frameworks (MOFs) and coordination networks/polymers are less prolific than other families featuring zinc, zirconium, titanium, lanthanides, etc. However, Bi 3+ is non-toxic, it readily forms polyoxocations, and its oxides are exploited in photocatalysis. This family of compounds provides opportunity in medicinal and energy applications. Here, we show that Bi node nuclearity depends on solvent polarity, leading to a family of Bi x -sulfonate/carboxylate coordination networks with x = 1–38. Larger nuclearity-node networks were obtained from polar and strongly coordinating solvents, and we attribute the solvent’s ability to stabilize larger species in solution. Here, the strong role of the solvent and the lesser role of the linker in defining node topologies differ from other MOF syntheses, and this is due to the Bi 3+ intrinsic lone pair that leads to weak node–linker interactions. We describe this family by single-crystal X-ray diffraction (eleven structures), obtained in pure forms and high yields. Ditopic linkers include NDS (1,5-naphthalenedisulfonate), DDBS (2,2'-[biphenyl-4,4'-diylchethane-2,1-diyl] dibenzenesulphonate), and NH 2 -benzendicarboxylate (BDC). While the BDC and NDS linkers yield more open-framework topologies that resemble those obtained by carboxylate linkers, topologies with DDBS linkers appear to be in part driven by association between DDBS molecules. An in situ small-angle X-ray scattering study of Bi 38 -DDBS reveals stepwise formation, including Bi 38 -assembly, pre-organization in solution, followed by crystallization, confirming the less important role of the linker. We demonstrate photocatalytic hydrogen (H 2 ) generation with select members of the synthesized materials without the benefit of a co-catalyst. Band gap determination from X-ray photoelectron spectroscopy (XPS) and UV–vis data suggest the DDBS linker effectively absorbs in the visible range with ligand-to-Bi-node charge transfer. In addition, materials containing more Bi (larger Bi 38 -nodes or Bi 6 inorganic chains) exhibit strong UV absorption, also contributing to effective photocatalysis by a different mechanism. All tested materials became black with extensive UV–vis exposure, and XPS, transmission electron microscopy, and X-ray scattering of the black Bi 38 -framework suggest that Bi o is formed in situ, without phase segregation. This evolution leads to enhanced photocatalytic performance, perhaps due to increased light absorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Impact of Arsenic- and Indium-Terminated InGaAs Stressors on Carrier Confinement, Strain, Defects, and Transport Properties of Tensile-Strained Ge

Device-quality tensile-strained Ge (ε-Ge) grown on a large bandgap semiconductor with superior electrical and optical carrier confinement is essential for group-IV-based optoelectronics. Properties of ε-Ge active layers synthesized on In 0.24 Ga 0.76 As buffers with two different surface terminations─arsenic-rich and indium-rich─were experimentally demonstrated, highlighting the factors not considered in theoretical calculations. High-resolution X-ray diffraction and Raman spectroscopy analyses of these ε-Ge/In 0.24 Ga 0.76 As heterostructures confirmed the fully strained (1.6%) and partially relaxed (0.82%) nature of the ε-Ge bonded with arsenic-terminated (Ge As-terminated ) and indium-terminated (Ge In-terminated ) In 0.24 Ga 0.76 As stressors, respectively. High-resolution cross-sectional transmission electron microscopy showed a coherent, sharp, and fully strained ε-Ge/In 0.24 Ga 0.76 As heterointerface in the Ge As-terminated heterostructure, whereas microtwin defects were present in the Ge In-terminated heterostructure. These heterostructures were further characterized by evaluating the minority carrier lifetimes, high for Ge As-terminated (525 ns) and low for Ge In-terminated (69 ns), using the photoconductive decay technique. Moreover, band alignment was constructed using X-ray photoelectron spectroscopy, where the Ge As-terminated heterostructure revealed that both holes and electrons were confined within the ε-Ge active layer as a type-I band alignment with ΔE V, As-terminated = 0.22 eV and ΔE C,As-terminated = 0.38 eV. On the other hand, the Ge In-terminated heterostructure exhibited a type-II band alignment with ΔE V,In-terminated = – 0.02 eV and ΔE C,In-terminated = 0.53 eV. Furthermore, the magnetotransport properties revealed high mobility (321 cm 2 /(V s)) with single-electron transport in Ge As-terminated heterostructure and low mobility (3.34 cm 2 /(V s)) with multihole transport in the Ge In-terminated heterostructure. Therefore, preferring the ε-Ge on the arsenic-rich surface of In 0.24 Ga 0.76 As stressor over the indium-rich surface during material synthesis offers device-quality materials with high carrier lifetime and superior carrier confinement, which can provide an opportunity to fabricate efficient group-IV-based optoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Intercalation-Induced Reversible Electrochromic Behavior of Two-Dimensional Ti 3 C 2 T x MXene in Organic Electrolytes

MXenes, a large family of two-dimensional materials, have attracted tremendous attention due to their unique physical and chemical properties. Reversible ion intercalation between MXene layers allows modification of the optical, thermal, magnetic, and chemical properties. The electrochemical charge/discharge of MXenes in aqueous electrolytes was reported to lead to reversible electrochromic behavior. In this work, the electrochromic effect of semitransparent Ti 3 C 2 T x MXene film was probed by electrochemical intercalation of Li ions. Correspondingly, a peak shift of 100 nm was observed in the UV-vis spectrum. By combining in-situ Raman spectroscopy, in-situ X-ray diffraction, and density functional theory calculations, we show that the electrochromic shift is primarily due to the formation of robust O-Li bonds and the emerging bands induced changes of inter-band excitations. Finally, understanding the mechanism of electrochromic behavior in Ti 3 C 2 T x lays the foundations of designating 2D materials with durable, controllable, and efficient intercalation-induced electrochromic behaviors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Importance of bulk excitations and coherent electron-photon-phonon scattering in photoemission from PbTe(111): Ab initio theory with experimental comparisons

This paper presents a fully ab initio many-body photoemission framework that includes coherent three-body electron-photon-phonon scattering to predict the transverse momentum distributions and the mean transverse energies (MTEs) of bulk photoelectrons from single-crystal photocathodes. The need to develop such a theory stems from the lack of studies that provide complete understanding of the underlying fundamental processes governing the transverse momentum distribution of photoelectrons emitted from single crystals. For example, initial predictions based on density-functional theory calculations of effective electron masses suggested that the (111) surface of PbTe would produce very small MTEs (≤ 15 meV), whereas our experiments yielded MTEs ten to twenty times larger than these predictions and also exhibited a lower photoemission threshold than predicted. The ab initio framework presented in this paper correctly reproduces both the magnitude of the MTEs from our measurements in PbTe(111) and the observed photoemission below the predicted threshold. Our results show that both photoexcitations into states that propagate in the bulk of the material and coherent many-body electron-photon-phonon scattering processes, which initial predictions ignored, play surprisingly important roles in photoemission from PbTe(111). Lastly, from the lessons learned, we recommend a procedure for rapid computational screening of potential single-crystal photocathodes for applications in next-generation ultrafast electron diffraction and X-ray free-electron lasers, which will enable significant advances in condensed matter research.

36 MATERIALS SCIENCE↗
DOE OSTI2021

MnSn 2 and MnSn 2 –TiO 2 nanostructured anode materials for lithium-ion batteries

The high theoretical lithium storage capacity of Sn makes it an enticing anode material for Li-ion batteries (LIBs); however, its large volumetric expansion during Li–Sn alloying must be addressed. Combining Sn with metals that are electrochemically inactive to lithium leads to intermetallics that can alleviate volumetric expansion issues and still enable high capacity. Here, we present the cycling behavior of a nanostructured MnSn 2 intermetallic used in LIBs. Nanostructured MnSn 2 is synthesized by reducing Sn and Mn salts using a hot injection method. The resulting MnSn 2 is characterized by x-ray diffraction and transmission electron microscopy and then is investigated as an anode for LIBs. The MnSn 2 electrode delivers a stable capacity of 514 mAh g -1 after 100 cycles at a C/10 current rate with a Coulombic efficiency >99%. Unlike other Sn-intermetallic anodes, an activation overpotential peak near 0.9 V versus Li is present from the second lithiation and in subsequent cycles. We hypothesize that this effect is likely due to electrolyte reactions with segregated Mn from MnSn 2 . To prevent these undesirable Mn reactions with the electrolyte, a 5 nm TiO 2 protection layer is applied onto the MnSn 2 electrode surface via atomic layer deposition. The TiO 2 -coated MnSn 2 electrodes do not exhibit the activation overpotential peak. The protection layer also increases the capacity to 612 mAh g -1 after 100 cycles at a C/10 current rate with a Coulombic efficiency >99%. This higher capacity is achieved by suppressing the parasitic reaction of Mn with the electrolyte, as is supported by x-ray photoelectron spectroscopy analysis.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Synthesis and Electrical Properties of a New Compound (BiSe) 0.97 (Bi 2 Se 3 ) 1.26 (BiSe) 0.97 (MoSe 2 ) Containing Metallic 1T-MoSe 2

The synthesis and electrical properties of a new misfit compound containing BiSe, Bi 2 Se 3 , and MoSe 2 constituent layers are reported. The reaction pathway involves competition between the formation of (BiSe) 1+x (Bi 2 Se 3 ) 1+y (BiSe) 1+x (MoSe 2 ) and [(Bi 2 Se 3 ) 1+y ] 2 (MoSe 2 ). Excess Bi and Se are required in the precursor to synthesize (BiSe) 1+x (Bi 2 Se 3 ) 1+y (BiSe) 1+x (MoSe 2 ). High-angle annular dark field-scanning transmission electron microscopy (HAADF-STEM) confirm the stacking sequence of the heterostructure. Small grains of both 2H- and 1T-MoSe 2 are observed in the MoSe 2 layers. X-ray photoelectron spectroscopy (XPS) indicates that there is a significantly higher percentage of 1T-MoSe 2 in (BiSe) 1+x (Bi 2 Se 3 ) 1+y (BiSe) 1+x (MoSe 2 ) than in (BiSe) 0.97 (MoSe 2 ), suggesting that more charge transfer to MoSe 2 occurs due to the additional BiSe layer. The additional charge transfer results in (BiSe) 1+x (Bi 2 Se 3 ) 1+y (BiSe) 1+x (MoSe 2 ) having a low resistivity (14–19 μΩ m) with metallic temperature dependence. Furthermore, the heterogeneous mix of MoSe 2 polytypes observed in the XPS complicates the interpretation of the Hall data as two bands contribute to the electrical continuity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Ex Situ Photoelectron Emission Microscopy of Polycrystalline Bismuth and Antimony Telluride Surfaces Exposed to Ambient Oxidation

The surfaces of textured polycrystalline N-type bismuth telluride and P-type antimony telluride materials were investigated using ex situ photoelectron emission microscopy (PEEM). PEEM enabled imaging of the work function for different oxidation times due to exposure to air across sample surfaces. The spatially averaged work function was also tracked as a function of air exposure time. N-type bismuth telluride showed an increase in the work function around grain boundaries relative to grain interiors during the early stages of air exposure-driven oxidation. At longer time exposure to air, the surface became homogenous after a ~5 nm-thick oxide formed. X-ray photoemission spectroscopy was used to correlate changes in PEEM imaging in real space and work function evolution to the progressive growth of an oxide layer. The observed work function contrast is consistent with the pinning of electronic surface states due to the defects at a grain boundary.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Antiferromagnetic real-space configuration probed by dichroism in scattered x-ray beams with orbital angular momentum

X-ray beams with orbital angular momentum (OAM) are a promising tool for x-ray characterization techniques. Beams with OAM have a helicity - an azimuthally varying phase - which leads to a gradient of the light field. New material properties can be probed by utilizing the helicity of an OAM beam. Here, we demonstrate a dichroic effect in resonant diffraction from an artificial antiferromagnet with a topological defect. We found that the scattered OAM beam has circular dichroism at the antiferromagnetic Bragg peak whose sign is coupled to its helicity, which reveals the real-space configuration of the antiferromagnetic ground state. Thermal cycling of the artificial antiferromagnet can change the ground state, as indicated by reversal of the sign of circular dichroism. This result is one of the first demonstrations of a soft x-ray spectroscopy characterization technique utilizing the OAM of x rays. In conclusion, this helicity-dependent circular dichroism exemplifies the potential to utilize OAM beams to probe matter in a way that is inaccessible using currently available x-ray techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Domain nucleation across the metal-insulator transition of self-strained V 2 O 3 films

Bulk V 2 O 3 features concomitant metal-insulator (MIT) and structural (SPT) phase transitions at T C ~ 160 K. In thin films, where the substrate clamping can impose geometrical restrictions on the SPT, the epitaxial relation between the V 2 O 3 film and substrate can have a profound effect on the MIT. Here we present a detailed characterization of domain nucleation and growth across the MIT in (001)-oriented V 2 O 3 films grown on sapphire. By combining scanning electron transmission microscopy (STEM) and photoelectron emission microscopy (PEEM), we imaged the MIT with planar and vertical resolution. We observed that upon cooling, insulating domains nucleate at the top of the film, where strain is lowest, and expand downwards and laterally. This growth is arrested at a critical thickness of 50 nm from the substrate interface, leaving a persistent bottom metallic layer. As a result, the MIT cannot take place in the interior of films below this critical thickness. However, PEEM measurements revealed that insulating domains can still form on a very thin superficial layer at the top interface. Our results demonstrate the intricate spatial complexity of the MIT in clamped V 2 O 3 , especially the strain-induced large variations along the c axis. Finally, engineering the thickness-dependent MIT can provide an unconventional way to build out-of-plane geometry devices by using the persistent bottom metal layer as a native electrode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

In situ study of the electronic structure of polar-to-polar SrTiO 3 /($000\bar1$)ZnO heterointerface

The SrTiO 3 (STO)/ZnO heterointerface, which is widely used in the fabrication of novel optoelectronic devices, is a classical system combining functional perovskite oxides and wurtzite-structure semiconductor materials. The electronic structure of the heterointerface often plays a significant role in controlling the functions of novel devices. In this study, the electronic structure was explored using in situ photoemission spectroscopy and X-ray absorption spectroscopy. X-ray diffraction results showed the coexistence of (111) STO and (011) STO orientations for the STO film deposited on the ZnO-($000\bar1$) substrate via pulsed laser deposition. High-resolution transmission electron microscopic results revealed two types of polar interfaces: [$11\bar2$][$10\bar1$](111) STO //[$1\bar210$][$10\bar10$]($000\bar1$) ZnO and [111][$2\bar1\bar1$](011) STO //[$10\bar21$][$10\bar10$]($000\bar1$)ZnO. In situ photoemission spectroscopic results revealed downward band bending and the transformation of the valence states of Ti from 4+ to 3+, with extra electrons transferring to the hybridization states between O 2p and Ti t 2g orbitals at the polar-to-polar STO/ZnO interface. We propose that the polar discontinuity drives the electron transfer to the STO/ZnO interface during the growth process. This study provides insight into the electronic structure of the STO/($000\bar1$)ZnO heterointerface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Supramolecular Metal Halide Complexes for High-Temperature Nonlinear Optical Switches

Nonlinear optical (NLO) switching materials, which exhibit reversible intensity modulation in response to thermal stimuli, have found extensive applications across diverse fields, including sensing, photoelectronics, and photonic applications. While significant progress has been made in solid-state NLO switching materials, these materials typically showcase their highest NLO performance near room temperature. However, this performance drastically deteriorates upon heating, primarily due to the phase transition undergone by the materials from non-centrosymmetric to centrosymmetric phase. Here, we introduce a new class of NLO switching materials, solid-state supramolecular compounds 18-Crown-6 ether@Cu 2 Cl 4 ·4H 2 O (1·4H 2 O), exhibiting reversible and stable NLO switching when subjected to near-infrared (NIR) photoexcitation and/or thermal stimuli. The reversible crystal structure in response to external stimuli is attributed to the presence of a weakly coordinated bridging water molecule, facilitated by hydrogen bonding/chelation interactions between the metal halide and crown-ether supramolecules. We observed an exceptionally high second-harmonic generation (SHG) signal under continuous photoexcitation, even at temperatures exceeding 110°C. In addition, the bridging water molecules within the complex can be released and recaptured in a fully reversible manner, all without requiring excessive energy input. This feature allows for precise control of SHG signal activation and deactivation through structural transformations, resulting in a high-contrast off/on ratio, reaching values in the million-fold range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗