Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “effective resolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Photonic Integrated Circuit TUned for Reconnaissance and Exploration (PICTURE)

The mid-infrared (MIR) spectral range (3-5 μm) is of particular interest for remotely sensing gaseous molecules such as H2O, CO2, CH4, N2O, CO, NH3, and other compounds. The infrared spectra of planets, moons, comets, and asteroids are rich in information, including gas composition and surface mineralogy. Significant advances in technology have emerged for ground-based telescopes, including the higher spectral resolution permitted by cross-dispersed instruments and heterodyne techniques. New technologies offer the opportunity to break this barrier, by using solid-state photonics. In the past three years, under the NASA ROSES PICASSO program, we have been developing key components for a revolutionary MIR spectrometer: Photonic Integrated Circuit TUned for Reconnaissance and Exploration (PICTURE), which is based on integrated photonics technology that offers ultra-small size, weight, and power (SWaP) with non-moving parts and low cost for future planetary missions. In this paper, we will describe our science and technology development progress leading to demonstrating the concept and functionalities of the PICTURE instrument. The photonic integrated circuit spectrometer (PICS) of the PICTURE instrument uses an integrated heterodyne detection scheme to significantly reduce SWaP and improve sensitivity. Our program goals are to advance the building blocks needed for the PICS, which include arrayed waveguide gratings (AWGs), quantum cascade lasers (QCLs) as local oscillators, and quantum cascade detectors (QCDs) as heterodyne detectors. In addition, we are leveraging a NASA SBIR program to develop the toolsets needed to fabricate MIR photonics lanterns (PL). The PL is a critical component that enables PICTURE to bring a signal from the collecting telescope to the PICS, which requires single optical mode inputs. PICTURE focuses on the CO spectral band at 4.6-4.8 μm that is of key importance to cometary science. We also continue to explore future instrument concepts that exploit the broad wavelength potential of the PICS design to perform spectroscopy spanning the full MIR and longwave IR (LWIR) bands. This will have wide applicability in planetary science, for example, to probe the strongest CO2, H2O, and CH4 transitions that are difficult (CH4) or impossible (CO2, H2O) to detect using Earth-based telescopes due to atmospheric opacity. Each integrated-photonics-spectrometer chip will feature a single heterodyne room-temperature laser with a wide wavelength tuning range, or multiple local-oscillator lasers for much broader spectral coverage. The fully developed PICTURE instrument will provide a cost-effective, high-resolution spectrometer for future space applications.

Anthony W Yu↗

Photonic Integrated Circuit TUned for Reconnaissance and Exploration (PICTURE)

The mid-infrared (MIR) spectral range (3-5 μm) is of particular interest for remotely sensing gaseous molecules such as H2O, CO2, CH4, N2O, CO, NH3, and other compounds. The infrared spectra of planets, moons, comets, and asteroids are rich in information, including gas composition and surface mineralogy. Significant advances in technology have emerged for ground-based telescopes, including the higher spectral resolution permitted by cross-dispersed instruments and heterodyne techniques. New technologies offer the opportunity to break this barrier, by using solid-state photonics. In the past three years, under the NASA ROSES PICASSO program, we have been developing key components for a revolutionary MIR spectrometer: Photonic Integrated Circuit TUned for Reconnaissance and Exploration (PICTURE), which is based on integrated photonics technology that offers ultra-small size, weight, and power (SWaP) with non-moving parts and low cost for future planetary missions. In this paper, we will describe our science and technology development progress leading to demonstrating the concept and functionalities of the PICTURE instrument. The photonic integrated circuit spectrometer (PICS) of the PICTURE instrument uses an integrated heterodyne detection scheme to significantly reduce SWaP and improve sensitivity. Our program goals are to advance the building blocks needed for the PICS, which include arrayed waveguide gratings (AWGs), quantum cascade lasers (QCLs) as local oscillators, and quantum cascade detectors (QCDs) as heterodyne detectors. In addition, we are leveraging a NASA SBIR program to develop the toolsets needed to fabricate MIR photonics lanterns (PL). The PL is a critical component that enables PICTURE to bring a signal from the collecting telescope to the PICS, which requires single optical mode inputs. PICTURE focuses on the CO spectral band at 4.6-4.8 μm that is of key importance to cometary science. We also continue to explore future instrument concepts that exploit the broad wavelength potential of the PICS design to perform spectroscopy spanning the full MIR and longwave IR (LWIR) bands. This will have wide applicability in planetary science, for example, to probe the strongest CO2, H2O, and CH4 transitions that are difficult (CH4) or impossible (CO2, H2O) to detect using Earth-based telescopes due to atmospheric opacity. Each integrated-photonics-spectrometer chip will feature a single heterodyne room-temperature laser with a wide wavelength tuning range, or multiple local-oscillator lasers for much broader spectral coverage. The fully developed PICTURE instrument will provide a cost-effective, high-resolution spectrometer for future space applications.

Anthony W. Yu↗

Effects of Cloud Horizontal Inhomogeneity and Drizzle on Remote Sensing of Cloud Droplet Effective Radius: Case Studies Based on Large-eddy Simulations

This study investigates effects of drizzle and cloud horizontal inhomogeneity on cloud effective radius (re) retrievals from the Moderate Resolution Imaging Spectroradiometer (MODIS). In order to identify the relative importance of various factors, we developed a MODIS cloud property retrieval simulator based on the combination of large-eddy simulations (LES) and radiative transfer computations. The case studies based on synthetic LES cloud fields indicate that at high spatial resolution (100 m) 3-D radiative transfer effects, such as illumination and shadowing, can induce significant differences between retrievals ofre based on reflectance at 2.1 m (re,2.1) and 3.7 m (re,3.7). It is also found that 3-D effects tend to have stronger impact onre,2.1 than re,3.7, leading to positive difference between the two (re,3.72.1) from illumination and negative re,3.72.1from shadowing. The cancellation of opposing 3-D effects leads to overall reasonable agreement betweenre,2.1 and re,3.7 at high spatial resolution as far as domain averages are concerned. At resolutions similar to MODIS, however, re,2.1 is systematically larger than re,3.7when averaged over the LES domain, with the difference exhibiting a threshold-like dependence on bothre,2.1and an index of the sub-pixel variability in reflectance (H), consistent with MODIS observations. In the LES cases studied, drizzle does not strongly impact reretrievals at either wavelength. It is also found that opposing 3-D radiative transfer effects partly cancel each other when cloud reflectance is aggregated from high spatial resolution to MODIS resolution, resulting in a weaker net impact of 3-D radiative effects onre retrievals. The large difference at MODIS resolution between re,3.7 and re,2.1 for highly inhomogeneous pixels with H 0.4 can be largely attributed to what we refer to as the plane-parallelrebias, which is attributable to the impact of sub-pixel level horizontal variability of cloud optical thickness onre retrievals and is greater for re,2.1 than re,3.7. These results suggest that there are substantial uncertainties attributable to 3-D radiative effects and plane-parallelre bias in the MODIS re,2.1retrievals for pixels with strong sub-pixel scale variability, and theH index can be used to identify these uncertainties.

Zhang, Zhibo↗

Pilot performance with a simulated ILS independence pictorial display

As part of a general investigation of the effectiveness of pictorial displays for manual control and monitoring of aircraft approaches and landings, a simulator study was conducted in which pilot performance with three pictorial displays was evaluated. These displays differed in the type of guidance symbology added to the basic perspective runway display. The effect of decreased resolution and update rate of the runway image on pilot performance was also determined. The results indicate that for pictorial displays with added guidance symbology, there was a marked improvement in pilot performance compared to results of a previous study in which the display consisted of only a runway image and aircraft attitude.

Palmer, E.↗

Interpretation Techniques Development

The processes, algorithms and procedures for extraction and interpretation of ERTS-1 data are discussed. Analysis of data acquired temporally is possible through geometric correction, correlation, and registration techniques. The powerful techniques in image enhancement developed for the lunar and planetary programs are valuable for Earth Resources Survey programs. There is evidence that both optical and digital methods of spatial information extraction can provide valuable sources of data information the ERTS system. The techniques available, even for a limited number of bands and limited resolution can be effectively used to extract much of the information required by resource managers.

Alford, W. L.↗

Circumstellar grains and the intrinsic polarization of starlight

Twenty-five long-period variable stars exhibiting intrinsic variable polarization have been monitored over the range 3.5-11 microns for several cycles. No conclusive evidence for gross changes in amount of circumstellar grains has been found. Thus circumstellar infrared emission is attributed to the total abundance of grains surrounding the star, which does not change by a large amount with time, while intrinsic polarization is attributed to more localized scattering and absorption effects. Spectrophotometry with resolution of about 0.015 over the 8-14 microns wavelength range of several stars with different chemical compositions indicates excess emission characteristic of 3 types of grains: (1) 'blackbody' grains, (2) silicate grains, and (3) silicon carbide grains.

Forrest, W. J.↗

Balance between resolution and signal-to-noise ratio in scanner design for earth resources systems

An outline is presented of a method in which a sensor under design can be evaluated by comparison with an existing sensor of similar spectral response, providing certain performance characteristics are known. An approach for calculating errors in radiance measurements is discussed, giving attention to calibration, error caused by resolution factors, noise effects on accuracy, and combined radiance level accuracies for several scanner designs. The derivation of error caused by the modulation transfer function is also considered.

Norwood, V. T.↗

Weighting in digital synthetic aperture radar processing

Weighting is employed in synthetic aperture radar (SAR) processing to reduce the sidelobe response at the expense of peak center response height and mainlobe resolution. The weighting effectiveness in digital processing depends not only on the choice of weighting function, but on the fineness of sampling and quantization, on the time bandwidth product, on the quadratic phase error, and on the azimuth antenna pattern. The results of simulations conducted to uncover the effect of these parameters on azimuth weighting effectiveness are presented. In particular, it is shown that multilook capabilities of future SAR systems may obviate the need for consideration of the antenna pattern, and that azimuth time-bandwidth products of over 200 are probably required before the digital results begin to approach the ideal results.

Dicenzo, A.↗

Neutron star binaries, pulsars and burst sources

Unresolved issues involving neutron star binaries, pulsars, and burst sources are described. Attention is drawn to the types of observations most likely to resolve them. Many of these observations are likely to be carried out during the next decade by one or more missions that have been approved or proposed. Flux measurements with an imaging detector and broad-band spectroscopic studies in the energy range 30-150 keV are discussed. The need for soft X-ray and X-ray observations with an instrument which has arcminute angular resolution and an effective area substantially greater than of ROSAT or EXOSAT is also discussed.

Lamb, F. K.↗

Instrumented aircraft verification of clear-air radar detection of low-level wind shear

A technique is described in which the longitudinal wind component at airports, measured by Doppler radar, is put through a Fourier transformation to produce an energy density spectrum. The result is multiplied by the aircraft response characteristics to produce quantitative data on aircraft performance in a wind shear situation. The Doppler radar measurements are made along the intended flight path. Two case studies, along a 3 deg approach path, are described from measurements in two modes: Lagrangian, where predictions were computed one range gate ahead of the plane, and Eulerian, where samples were measured instantaneously along the flight path. Wind data obtained every second were interpolated to fit a numerical model by using a cubic spline. Eulerian data were superior to Lagrangian data in terms of ranging, and nearly equal for wind speeds. Improvements in current 75% accuracy are noted to be possible with shrouded antennas to reduce sidelobes and use of Doppler radar with higher resolution to eliminate effects of small scale disturbances within the pulse volume.

Mccarthy, J.↗

SAR imaging of ocean waves - Theory

A SAR imaging integral for a rough surface is derived. Aspects of distributed target imaging and questions of ocean-wave imaging are considered. A description is presented of the results of analyses which are performed on aircraft and a spacecraft data in order to gain an understanding of the SAR imaging of ocean waves. The analyzed data illustrate the effect of radar resolution on the images of azimuthally traveling waves, the dependence of image distortion on the angle which the waves make with the radar flight path, and the dependence of the focusing parameter of the radar matched filter on the ocean wave period for azimuthally traveling waves. A dependence of ocean-wave modulation on significant wave height is also observed. The observed dependence of the modulations of azimuth waves on radar resolution is in contradiction to the hypothesis that these modulations are caused mainly by velocity bunching.

Jain, A.↗

Comparative assessment of LANDSAT-D MSS and TM data quality for mapping applications in the Southeast

Rectifications of multispectral scanner and thematic mapper data sets for full and subscene areas, analyses of planimetric errors, assessments of the number and distribution of ground control points required to minimize errors, and factors contributing to error residual are examined. Other investigations include the generation of three dimensional terrain models and the effects of spatial resolution on digital classification accuracies.

Source record↗

The satellite altimeter as a platform for observation of the oceanic mesoscale

The use of the satellite radar altimeter as a platform to provide synoptic monitoring of the oceanic mesoscale is faced with two critical issues: removal of geoid error or contamination and election of optimum space/time sampling strategies. Long wavelength orbit determination errors are not critical problems for altimeter measurements of the basin scale circulation. Both issues are addressed within the constraints provided by orbital mechanics which dictates the laydown pattern of the satellite's groundtracks in space/time. Other issues which must be assessed are: adequate mission duration scales and the problems of geophysical noise sources and instrumental noise which degrade the effective alongtrack spatial resolution of the altimeter.

Mitchell, J. L.↗

ECMWF/NMC/GLAS Joint Simulation Study

Simulation experiments to provide a quantitative assessment of the potential impact of proposed observing systems on large scale numerical weather prediction are conducted. Instruments to be simulated include current conventional and satellite observing systems, advanced passive sounders such as the AMTS and AMSU, and active LIDAR systems for the measurement of wind, temperature and humidity profiles. The potential impact of individual observing systems, the effect of coverage, resolution, accuracy and assimilation methodology are studied.

Atlas, R.↗

Three-dimensional inversion of satellite observed radiances A proposal

Fully three-dimensional temperature fields are obtained from observed satellite radiances through the use of variational methods which generalize the method of Wahba and Wendelberger (1980). This variational formalism allows a variety of different information types to contribute to the inversion process. Full use can be made of the horizontal smoothness of the temperature field in the calculation of three-dimensional retrievals. The present method facilitates the acquisition of maximum vertical resolution, accomplishes cloud effect filtering, and minimizes the effects of instrument noise, to yield horizontally coherent retrievals.

Hoffman, R. N.↗

Ground Reflectance Measurements from Thematic Mapper Data

Satellite radiance data are measures of solar radiation that has been reflected by the Earth's surface and scattered and absorbed by atmospheric gases and aerosols. Of concern to geologists are the surface reflectance and the degrading effects on surface resolution and albedo contrast introduced by atmospheric phenomena. The objects of this research have been to: (1) provide an empirical relationship between scanner radiance and ground reflectance allowing interpretation of the satellite data in terms of the surface parameter, and (2) assess the precision with which surface spectral reflectance may be recovered from LANDSAT-4 TM data in the presence of perturbing atmospheric and instrumental factors. The approach is field-oriented, and utilizes ground observations of surface spectral reflectance with portable spectrometers and radiometers to develop the required empirical relationships.

Conel, J. E.↗

MECA Conference on Mars: The Evolution of Its Climate and Atmosphere, Washington, DC, July 18, 19, 1986, Proceedings

The geological, atmospheric, and climatic history of Mars is explored in reviews and reports of recent observational and interpretive investigations. Topics addressed include evidence for a warm wet climate on early Mars, volatiles on earth and on Mars, CO2 adsorption on palagonite and its implications for Martian regolith partitioning, and the effect of spatial resolution on interpretations of Martian subsurface volatiles. Consideration is given to high-resolution observations of rampart craters, ring furrows in highland terrains, the interannual variability of the south polar cap, telescopic observations of the north polar cap and circumpolar clouds, and dynamical modeling of a planetary-wave polar-warming mechanism.

Source record↗