Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WAVEGUIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Initial pointing calibrations for the DSS 13 34-meter beam-waveguide antenna

The beam pointing of the Deep Space Station (DSS) 13 beam-waveguide antenna at the Goldstone Venus site was calibrated during the postconstruction performance testing period from Jul. 1990 through Jan. 1991. The pointing calibrations were based on errors measured on radio sources at both the Cassegrain and centerline beam-waveguide focal points. The blind pointing performance goal of 5.0 mdeg, 3-sigma at Ka-band (32 GHz) was demonstrated to be met for low (less than 10 mph) wind conditions.

Alvarez, L. S.↗
NASA NTRS1991

Theoretical and experimental characterization of coplanar waveguide discontinuities for filter applications

A full-wave analysis of shielded coplanar waveguide two-port discontinuities based on the solution of an appropriate surface integral equation in the space domain is presented. Frequency-dependent scattering parameters for open-end and short-end coplanar waveguide (CPW) stubs are computed using this method. The numerically derived results are compared with measurements performed in the frequency range 5-25 GHz and show very good agreement. From the scattering parameters, lumped-element equivalent circuits have been derived to model the discontinuities. The inductors and capacitors of these models have been represented by closed-form equations, as functions of the stub length, to compute the circuit element values for these discontinuities.

Dib, Nihad I.↗
NASA NTRS1992

Rugged Noncontact Backshorts For Waveguides

Improved adjustable noncontact backshort for waveguide easily scaled to any frequency from 1 to 1,000 GHz, not vulnerable to wear, oxidation, or corrosion of contacts, and stronger and easier to fabricate. Will allow development of waveguide mixer and oscillator circuits at frequencies approaching 1,000 GHz, for atmospheric and astrophysical remote-sensing programs.

Mcgrath, William R.↗
NASA NTRS1992

Designing A Beam Waveguide For Multiple Frequencies

Paper addresses defocusing and diffraction effects important in design of beam waveguide. Phase center of beam waveguide at lower frequency differs from focal point of geometric optics. If antenna system optimized for higher frequency, shift in phase center causes defocusing, with loss of signal at lower frequency. Defocusing caused by diffraction at lower frequencies reduced by shaping input pattern.

Galindo, Victor↗
NASA NTRS1992

Comparative evaluation of optical waveguides as alternative interconnections for high performance packaging

A detailed comparison between optical and electrical interconnections is presented, with emphasis on advantages and drawbacks of optical link utilization. The impact of attenuation, dispersive degradation, and fan out on signal integrity is discussed. Reflections from discontinuities are taken into account in the section on fan out. According to our results, there is no obvious advantage of using optical interconnections for the distribution of digital signals containing significant frequency components in excess of 10 GHz, unless substantial distances are involved, for which low dispersion optical waveguides could provide a solution. The implementation of a polyimide optical waveguide in the MCNC package is discussed.

Schacham, S. E.↗
NASA NTRS1993

Scattering-Matrix Program For Circular Waveguide Components

Scattering Matrix Program for Circular Waveguide Junctions, CWGSCAT, computes scattering matrices of series of circular waveguide sections. Sections must have same axis, but radius and length of each section completely arbitrary. Step discontinuities, corrugated sections, and horns analyzed. Written in FORTRAN.

Hoppe, Daniel J.↗
NASA NTRS1993

Gaussian-Beam/Physical-Optics Design Of Beam Waveguide

In iterative method of designing wideband beam-waveguide feed for paraboloidal-reflector antenna, Gaussian-beam approximation alternated with more nearly exact physical-optics analysis of diffraction. Includes curved and straight reflectors guiding radiation from feed horn to subreflector. For iterative design calculations, curved mirrors mathematically modeled as thin lenses. Each distance Li is combined length of two straight-line segments intersecting at one of flat mirrors. Method useful for designing beam-waveguide reflectors or mirrors required to have diameters approximately less than 30 wavelengths at one or more intended operating frequencies.

Veruttipong, Watt↗
NASA NTRS1992

Conductor-backed coplanar waveguide resonators of Y-Ba-Cu-O and Tl-Ba-Ca-Cu-O on LaAlO3

Conductor-backed coplanar waveguide (CBCPW) resonators operating at 10.8 GHz have been fabricated from Tl-Ba-Ca-O (TBCCO) and Y-Ba-Cu-O (YBCO) thin films on LaAlO3. The resonators consist of a coplanar waveguide (CPW) patterned on the superconducting film side of the LaAlO3 substrate with a gold ground plane coated on the opposite side. These resonators were tested in the temperature range from 14 to 106 K. At 77 K, the best of our TBCCO and YBCO resonators have an unloaded quality factor (Qo) 7 and 4 times, respectively, larger than that of a similar all-gold resonator. In this study, the Qo's of the TBCCO resonators were larger than those of their YBCO counterparts throughout the aforementioned temperature range.

Miranda, F. A.↗
NASA NTRS1992

A submillimeter tripler using a quasi-waveguide structure

A new type of frequency multiplier structure is being developed which is suitable for application at frequencies above 1 THz. This structure preserves some of the properties of waveguide for mode control, yet is not truly single mode. The device resembles a sectoral horn, with a varactor diode mounted near the throat. Input and output coupling are through the same aperture, requiring a quasi-optical diplexer. Initial tests are directed at building a tripler at 500 GHz, for comparison with waveguide structures. The diplexer is a blazed diffraction grating with appropriate focusing optics. Model studies show that the impedance match to a varactor should be good, and initial tests of the beam patterns of the prototype indicate that optical coupling efficiency should be very high. The structure also has the potential for use as a fundamental mixer, or as a third harmonic mixer.

Erickson, Neal R.↗
NASA NTRS1992

Analysis of a novel non-contacting waveguide backshort

A new non-contacting waveguide backshort has been developed for millimeter and submillimeter wave frequencies. The design consists of a metal bar with rectangular or circular holes cut into it, which is covered with a dielectric (mylar) layer to form a snug fit with the walls of a waveguide. Hole geometries are adjusted to obtain a periodic variation of the guide impedance on the correct length scale, in order to produce efficient reflection of RF power. It is a mechanically rugged design which can be easily fabricated for frequencies from 1 to 1000 GHz and is thus a sound alternative to the miniaturization of conventional non-contacting shorts. To aid in high-frequency design, a rigorous full-wave analysis has been completed, which will allow variations of the size, number and spacing of the holes to be easily analyzed. This paper will review the backshort design and the method developed for theoretical characterization, followed by a comparison of the experimental and numerical results. Low frequency models operating from 4-6 GHz are shown to demonstrate return loss of greater than -0.2 dB over a 33 percent bandwidth. The theory is in good agreement with measured data.

Weller, T. M.↗
NASA NTRS1992

A new analysis of beam waveguide antennas considering the presence of the metal enclosure

Large beam waveguide (BWG) type ground station antennas are generally designed using analysis which ignores the presence of the metallic tube enclosing the beam waveguide mirrors. The common analysis approaches are physical optics and Gaussian mode analyses. The weakness of these analyses is that they do not shed any light with regards to the effect of the metal tube. In this paper, the first known BWG analysis which considers the presence of the metal tube is presented. Numerical results of a two-mirror system using the new analysis are compared with experiments which have verified the new analysis.

Cha, Alan G.↗
NASA NTRS1993

A multiple-mode three-dimensional model of VLF propagation in the earth-ionosphere waveguide in the presence of localized D region disturbances

Transient localized D region disturbances, such as those associated with lightning discharges, affect the characteristics of VLF waves propagating in the Earth-ionosphere waveguide. In particular, both phase and amplitude changes in the subionospheric signal can be observed at receiving sites as a result of the wave scattering that takes place in the disturbed region. In the present paper we present a multiple-mode three-dimensional model of VLF propagation in the Earth-ionosphere waveguide in the presence of localized D region disturbances. The model takes into account great circle (GC) propagation paths with realistic ground and ionospheric conductivity changes that result in mode conversion along the path. It is assumed that conductivity changes transverse to the GC paths are negligible except in the vicinity of the D region disturbance and that mode coupling is negligible within the disturbed region. This new model is applied to experimental observations and is found to be in general agreement. The diagnostics potential of the model for characterizing energetic particle precipitation events is discussed.

Poulsen, William L.↗
NASA NTRS1991

Design aspects and comparison between high Tc superconducting coplanar waveguide and microstrip line

The high T sub c superconducting microstrip line and coplanar waveguide are compared in terms of the loss characteristics and the design aspects. The quality factor Q values for each structure are compared in respect to the same characteristic impedance with the comparable dimensions of the center conductor of the coplanar waveguide and the strip of the microstrip line. Also, the advantages and disadvantages for each structure are discussed in respect to passive microwave circuit applications.

Kong, K. S.↗
NASA NTRS1991

Coplanar waveguide microwave filter of YBa2Cu3O7

Thin film low-pass microwave filters have been made with laser-ablated YBa2Cu3O(7-delta) (YBCO) deposited on LaAlO3 substrates, using a coplanar waveguide structure. The coplanar waveguide sections had dimensions suited for integrated circuits. Measured losses in liquid nitrogen were superior to the loss in a similar thin-film copper filter throughout the 0 to 9.5 GHz pass-band. A simple transmission-line model is adequate for filter design using YBCO films with repeatable characteristics. The measured filters demonstrate the performance of fully patterned YBCO after sealing in space-qualifiable hermetic packages. Five packaged filters of this design were delivered to the Naval Research Laboratory as candidates for space flight in the High Temperature Superconductivity Space Experiment.

Chew, Wilbert↗
NASA NTRS1992

Broadside-coupled coplanar waveguides and their end-coupled band-pass filter applications

New broadside-coupled coplanar waveguides, suitable for applications requiring wide bandwidths, tight couplings, and large mode effective-dielectric-constant ratios, are presented. Their analysis and investigation are described. Simple equations relating the per-unit-length capacitances of the c- and pi-modes and the per-unit-length capacitance matrices of the coupled structures to those obtained when applying even- and odd-symmetric voltages are also derived. New broadside end-coupled band-pass filters have been developed at X-band (8-12 GHz) with less than 1.5 and 1.0 dB passband insertion losses using the proposed four-ground-plane and two-ground-plane coplanar waveguide structures, respectively. Good agreement between the experimental results and those predicted theoretically was also observed.

Nguyen, Cam↗
NASA NTRS1995

Calculated Coupling Efficiency Between an Elliptical-Core Optical Fiber and a Silicon Oxynitride Rib Waveguide [Corrected Copy]

The effective-index method and Marcatili's technique were utilized independently to calculate the electric field profile of a rib channel waveguide. Using the electric field profile calculated from each method, the theoretical coupling efficiency between a single-mode optical fiber and a rib waveguide was calculated using the overlap integral. Perfect alignment was assumed and the coupling efficiency calculated. The coupling efficiency calculation was then repeated for a range of transverse offsets.

Tuma, Margaret L.↗
NASA NTRS1995

Calculated coupling efficiency between an elliptical-core optical fiber and an optical waveguide over temperature

To determine the feasibility of coupling the output of a single-mode optical fiber into a single-mode rib waveguide in a temperature varying environment, a theoretical calculation of the coupling efficiency between the two was investigated. Due to the complex geometry of the rib guide, there is no analytical solution to the wave equation for the guided modes, thus, approximation and/or numerical techniques must be utilized to determine the field patterns of the guide. In this study, three solution methods were used for both the fiber and guide fields; the effective-index method (EIM), Marcatili's approximation, and a Fourier method. These methods were utilized independently to calculate the electric field profile of each component at two temperatures, 20 C and 300 C, representing a nominal and high temperature. Using the electric field profile calculated from each method, the theoretical coupling efficiency between an elliptical-core optical fiber and a rib waveguide was calculated using the overlap integral and the results were compared. It was determined that a high coupling efficiency can be achieved when the two components are aligned. The coupling efficiency was more sensitive to alignment offsets in the y direction than the x, due to the elliptical modal field profile of both components. Changes in the coupling efficiency over temperature were found to be minimal.

Tuma, Margaret L.↗